Remove the documentation for the `status` field in the `sp805_wdt`
structure, as the field does not exist.
Signed-off-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241213192858.916377-1-prabhakar.csengg@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Update the `rzv2h_wdt_probe()` function to consistently use the local
`dev` pointer, which is already extracted from `&pdev->dev`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241213171157.898934-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
sp805_wdt::load_val is of type unsigned int. When the interrupt is
inactive wdt_timeleft adds one to the value, and then adds that to the
value used to calculate the time remaining. Unfortunately it's not
unlikely that load_val contains LOAD_MAX, which is 0xFFFFFFFF and wraps
to zero when one is added to it, resulting in the time left being
understated by about 21.7s. Fix this by ensuring the addition happens as
64-bit.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241203095744.3001795-1-mac@mcrowe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
According to AM62x TRM WDT period is (RTIDWDPRLD + 1) * (2^13) / RTICLK1,
Fix the heartbeat recovery. In practice this doesn't affect rounded
heatbeat in seconds, but it does correct 4% of error in milliseconds,
for, say, default 60s heartbeat. This affects last_ping calculation.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241126073646.126752-1-alexander.sverdlin@siemens.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ3vs1AAKCRCRxhvAZXjc
omdqAP9Mn4HF85p5X7WRtUgrF7MGQft3EBfWE+sUxCMTc49NGQD/Ti7hqGNleEih
MmjUjLZSG1e3lFHYQm0nqmjO2RexbQ0=
=Li7D
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Relax assertions on failure to encode file handles
The ->encode_fh() method can fail for various reasons. None of them
warrant a WARN_ON().
- Fix overlayfs file handle encoding by allowing encoding an fid from
an inode without an alias
- Make sure fuse_dir_open() handles FOPEN_KEEP_CACHE. If it's not
specified fuse needs to invaludate the directory inode page cache
- Fix qnx6 so it builds with gcc-15
- Various fixes for netfslib and ceph and nfs filesystems:
- Ignore silly rename files from afs and nfs when building header
archives
- Fix read result collection in netfslib with multiple subrequests
- Handle ENOMEM for netfslib buffered reads
- Fix oops in nfs_netfs_init_request()
- Parse the secctx command immediately in cachefiles
- Remove a redundant smp_rmb() in netfslib
- Handle recursion in read retry in netfslib
- Fix clearing of folio_queue
- Fix missing cancellation of copy-to_cache when the cache for a
file is temporarly disabled in netfslib
- Sanity check the hfs root record
- Fix zero padding data issues in concurrent write scenarios
- Fix is_mnt_ns_file() after converting nsfs to path_from_stashed()
- Fix missing declaration of init_files
- Increase I/O priority when writing revoke records in jbd2
- Flush filesystem device before updating tail sequence in jbd2
* tag 'vfs-6.13-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits)
ovl: support encoding fid from inode with no alias
ovl: pass realinode to ovl_encode_real_fh() instead of realdentry
fuse: respect FOPEN_KEEP_CACHE on opendir
netfs: Fix is-caching check in read-retry
netfs: Fix the (non-)cancellation of copy when cache is temporarily disabled
netfs: Fix ceph copy to cache on write-begin
netfs: Work around recursion by abandoning retry if nothing read
netfs: Fix missing barriers by using clear_and_wake_up_bit()
netfs: Remove redundant use of smp_rmb()
cachefiles: Parse the "secctx" immediately
nfs: Fix oops in nfs_netfs_init_request() when copying to cache
netfs: Fix enomem handling in buffered reads
netfs: Fix non-contiguous donation between completed reads
kheaders: Ignore silly-rename files
fs: relax assertions on failure to encode file handles
fs: fix missing declaration of init_files
fs: fix is_mnt_ns_file()
iomap: fix zero padding data issue in concurrent append writes
iomap: pass byte granular end position to iomap_add_to_ioend
jbd2: flush filesystem device before updating tail sequence
...
Commit 255ab27a07 ("hwmon: (pwm-fan) Introduce start from stopped state
handling") added two of_property_read_u32() calls after the driver was
reworked to use device_property_* in commit dfd977d85b ("hwmon: (pwm-fan)
Make use of device properties"), so convert those as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20250102170429.791912-1-peter@korsgaard.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use a device lifecycle managed action to release tsp ti_sci_proc handle.
This helps prevent mistakes like releasing out of order in cleanup
functions and forgetting to release on error paths.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241219110545.1898883-6-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Document the SM8750 SoC binding and the boards which use it.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_dt-v3-1-4d5a8269950b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use device lifecycle managed devm_rproc_add() helper function. This
helps prevent mistakes like deleting out of order in cleanup functions
and forgetting to delete on all error paths.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241219110545.1898883-5-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add driver for Display clock controller (DISPCC) in Qualcomm SM8750.
The device has several differences against SM8650, including new Pongo
PLLs and different clock parents, thus no compatibility or driver
re-usage.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250106-sm8750-dispcc-v2-3-6f42beda6317@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for Pongo type of PLL clocks, used in Qualcomm SM8750 SoC.
Notable difference comparing to other PLLs is the need for calibration
for internally generated clock followed by wait_for_pll(). This is done
in configure call and at this time clocks are not yet registered, thus
wait_for_pll() cannot use clk_hw_get_name. Locking during this
calibration requires much more time, thus increase the timeout in
wait_for_pll().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250106-sm8750-dispcc-v2-2-6f42beda6317@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add bindings for the Qualcomm SM8750 Display Clock Controller (DISPCC).
Bindings are similar to existing SM8550 and SM8650 (same clock inputs),
but the clock hierarchy is quite different and these are not compatible
devices.
The binding header was copied from downstream sources, so I retained
original copyrights.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250106-sm8750-dispcc-v2-1-6f42beda6317@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The TCSR clock controller found on SM8750 provides refclks
for PCIE, USB and UFS. Add clock driver for it.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-8-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update the match table for SC7280 to sort it in alphabetical order.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-2-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the global clock controller on Qualcomm
SM8750 platform.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-5-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Drivers will need to register dmem regions at probe time, so let's
give them a drm-managed helper.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20241204134410.1161769-3-dev@lankhorst.se
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This code is based on the RDMA and misc cgroup initially, but now
uses page_counter. It uses the same min/low/max semantics as the memory
cgroup as a result.
There's a small mismatch as TTM uses u64, and page_counter long pages.
In practice it's not a problem. 32-bits systems don't really come with
>=4GB cards and as long as we're consistently wrong with units, it's
fine. The device page size may not be in the same units as kernel page
size, and each region might also have a different page size (VRAM vs GART
for example).
The interface is simple:
- Call dmem_cgroup_register_region()
- Use dmem_cgroup_try_charge to check if you can allocate a chunk of memory,
use dmem_cgroup__uncharge when freeing it. This may return an error code,
or -EAGAIN when the cgroup limit is reached. In that case a reference
to the limiting pool is returned.
- The limiting cs can be used as compare function for
dmem_cgroup_state_evict_valuable.
- After having evicted enough, drop reference to limiting cs with
dmem_cgroup_pool_state_put.
This API allows you to limit device resources with cgroups.
You can see the supported cards in /sys/fs/cgroup/dmem.capacity
You need to echo +dmem to cgroup.subtree_control, and then you can
partition device memory.
Co-developed-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Co-developed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20241204143112.1250983-1-dev@lankhorst.se
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Use a device lifecycle managed ioremap helper function. This helps
prevent mistakes like unmapping out of order in cleanup functions and
forgetting to unmap on all error paths.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241219110545.1898883-4-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed action to free memory. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting
to free on error paths.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241219110545.1898883-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed action to release reserved memory. This
helps prevent mistakes like releasing out of order in cleanup functions
and forgetting to release on error paths.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241219110545.1898883-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The HDMI on RK3576 shares the same IP block (PHY and Controller)
with rk3588.
However, there are some control bits scattered in different GRF.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231094425.253398-4-andyshrk@163.com
Since commit 559218d43e ("block: pre-calculate max_zone_append_sectors"),
queue_limits's max_zone_append_sectors is default to be 0 and it is only
updated when there is a zoned device. So, we have
lim->max_zone_append_sectors = 0 when there is no zoned device in the
filesystem.
That leads to fs_info->max_zone_append_size and thus
fs_info->max_extent_size to be 0, which is wrong and can for example
lead to a divide by zero in count_max_extents().
Fix this by only capping fs_info->max_extent_size to
fs_info->max_zone_append_size when it is non-zero.
Based on a patch from Naohiro Aota <naohiro.aota@wdc.com>, from which
much of this commit message is stolen as well.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 559218d43e ("block: pre-calculate max_zone_append_sectors")
Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Syzbot reported a crash with the following call trace:
BTRFS info (device loop0): scrub: started on devid 1
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs]
scrub_simple_mirror+0x175/0x260 [btrfs]
scrub_stripe+0x5d4/0x6c0 [btrfs]
scrub_chunk+0xbb/0x170 [btrfs]
scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs]
btrfs_scrub_dev+0x240/0x600 [btrfs]
btrfs_ioctl+0x1dc8/0x2fa0 [btrfs]
? do_sys_openat2+0xa5/0xf0
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
[CAUSE]
The reproducer is using a corrupted image where extent tree root is
corrupted, thus forcing to use "rescue=all,ro" mount option to mount the
image.
Then it triggered a scrub, but since scrub relies on extent tree to find
where the data/metadata extents are, scrub_find_fill_first_stripe()
relies on an non-empty extent root.
But unfortunately scrub_find_fill_first_stripe() doesn't really expect
an NULL pointer for extent root, it use extent_root to grab fs_info and
triggered a NULL pointer dereference.
[FIX]
Add an extra check for a valid extent root at the beginning of
scrub_find_fill_first_stripe().
The new error path is introduced by 42437a6386 ("btrfs: introduce
mount option rescue=ignorebadroots"), but that's pretty old, and later
commit b979547513 ("btrfs: scrub: introduce helper to find and fill
sector info for a scrub_stripe") changed how we do scrub.
So for kernels older than 6.6, the fix will need manual backport.
Reported-by: syzbot+339e9dbe3a2ca419b85d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/67756935.050a0220.25abdd.0a12.GAE@google.com/
Fixes: 42437a6386 ("btrfs: introduce mount option rescue=ignorebadroots")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The second CSI-2 C-PHY data-lanes have different line orders (BCA) than
the two other data-lanes (ABC) for both connected CSI-2 receivers,
describe this in the device tree.
This has worked in the past as the R-Car CSI-2 driver did not have
documentation for the line order configuration, hence magic values were
written to the registers for this specific setup. Now the registers
involved are documented, the hardware description as well as the driver
needs to be updated.
Note that the numerical values will be replaced by symbolic values
later.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250106104458.3596109-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RK3576 HDMI TX Controller is very similar to that of RK3588, but
with some control bits for IO and interrupts status scattered across
different GRF.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231094425.253398-3-andyshrk@163.com
There are some control bits for IO and interrupts status scattered
across different GRF on differt SOC.
Add platform callback for this IO setting and interrupts status
handling.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231094425.253398-2-andyshrk@163.com
Commit f1517eb790 ("bpf/tests: Expand branch conversion JIT test")
introduced "Long conditional jump tests" but due to those tests making
use of 64 bits DIV and MOD, they don't get jited on powerpc/32,
leading to the long conditional jump test being skiped for unrelated
reason.
Add 4 new tests that are restricted to 32 bits ALU so that the jump
tests can also be performed on platforms that do no support 64 bits
operations.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/609f87a2d84e032c8d9ccb9ba7aebef893698f1e.1736154762.git.christophe.leroy@csgroup.eu
If ROM bar is missing for any reason, we can fallback to using pdev->rom
to expose the ROM content to the guest. This fixes some passthrough use
cases where the upstream bridge does not have enough address window.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Link: https://lore.kernel.org/r/20250102185013.15082-3-Yunxiang.Li@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
After commit 0c0e0736ac ("PCI: Set ROM shadow location in arch code,
not in PCI core"), the shadow ROM works the same as regular ROM BARs so
these code paths are no longer needed.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Link: https://lore.kernel.org/r/20250102185013.15082-2-Yunxiang.Li@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Remove the #ifdef iowrite64 and #ifdef ioread64 checks around calls to
64 bit IO access. Since default implementations have been enabled, the
checks are not required.
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241210131938.303500-3-ramesh.thomas@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
