Drop a minor optimization of zeroing the padding between data and
timestamp and zero the whole structure. This is done in favor of
simpler code, and in order to drop the usage of the internal private
variable "scan_timestamp" of the struct iio_dev.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241214191421.94172-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change the order of regulator enable and reset so that power supplies
are turned on before touching the reset line. Generally, chips should
have the VDRIVE supply enabled before applying voltage on any pins.
While we are at it, remove the voltage level checks. If the power
supplies are not supplying the correct voltage, this is a hardware
design problem, not a software problem.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241216-iio-regulator-cleanup-round-6-v2-1-9482164b68cb@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change X to Y when referring to channel number in the ABI documentation.
There were only a few cases using X (and one using Z). By far, most
documented attributes are using Y for the channel number placeholder.
For consistency, we should follow the same convention throughout.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241216-doc-iio-use-voltagey-consistently-v1-1-9e34a72133bc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The documentation for struct ad5624r_state contains members that are (no
longer?) part of the structure.
Remove unnecessary docs.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/Z2KFC7ZBwmM69Qb4@mva-rohm
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add devicetree bindings for the OPT4060 RGBW color sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Per-Daniel Olsson <perdaniel.olsson@axis.com>
Link: https://patch.msgid.link/20241218104836.2784523-2-perdaniel.olsson@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This fixes a checkpatch warning:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#70: FILE: drivers/iio/adc/ad_sigma_delta.c:253:
+ unsigned status_reg;
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241218114809.1378063-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The BMP{2,3,5}80 and BME280 devices have an SPI interface, so include it
in the device-tree.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241209233845.29539-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace the powerup / powerdown functions by a generic function to put
the sensor in STANDBY, or MEASURE mode. When configuring the FIFO for
several features of the accelerometer, it is recommended to put
measuring in STANDBY mode.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20241213211909.40896-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit b18b047002 ("kbuild: change scripts/mksysmap into sed script")
changed the invocation of the script, to call sed directly without
shell.
That means, the current extra escape that was added in:
commit ec336aa831 ("scripts/mksysmap: Fix badly escaped '$'")
for the shell is not correct any more, at the moment the stack traces
for nvhe are corrupted:
[ 22.840904] kvm [190]: [<ffff80008116dd54>] __kvm_nvhe_$x.220+0x58/0x9c
[ 22.842913] kvm [190]: [<ffff8000811709bc>] __kvm_nvhe_$x.9+0x44/0x50
[ 22.844112] kvm [190]: [<ffff80008116f8fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4
With this patch:
[ 25.793513] kvm [192]: nVHE call trace:
[ 25.794141] kvm [192]: [<ffff80008116dd54>] __kvm_nvhe_hyp_panic+0xb0/0xf4
[ 25.796590] kvm [192]: [<ffff8000811709bc>] __kvm_nvhe_handle_trap+0xe4/0x188
[ 25.797553] kvm [192]: [<ffff80008116f8fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4
Fixes: b18b047002 ("kbuild: change scripts/mksysmap into sed script")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
With the latest mm-unstable, setting the iaa_crypto sync_mode to 'async'
causes crypto testmgr.c test_acomp() failure and dmesg call traces, and
zswap being unable to use 'deflate-iaa' as a compressor:
echo async > /sys/bus/dsa/drivers/crypto/sync_mode
[ 255.271030] zswap: compressor deflate-iaa not available
[ 369.960673] INFO: task cryptomgr_test:4889 blocked for more than 122 seconds.
[ 369.970127] Not tainted 6.13.0-rc1-mm-unstable-12-16-2024+ #324
[ 369.977411] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 369.986246] task:cryptomgr_test state:D stack:0 pid:4889 tgid:4889 ppid:2 flags:0x00004000
[ 369.986253] Call Trace:
[ 369.986256] <TASK>
[ 369.986260] __schedule+0x45c/0xfa0
[ 369.986273] schedule+0x2e/0xb0
[ 369.986277] schedule_timeout+0xe7/0x100
[ 369.986284] ? __prepare_to_swait+0x4e/0x70
[ 369.986290] wait_for_completion+0x8d/0x120
[ 369.986293] test_acomp+0x284/0x670
[ 369.986305] ? __pfx_cryptomgr_test+0x10/0x10
[ 369.986312] alg_test_comp+0x263/0x440
[ 369.986315] ? sched_balance_newidle+0x259/0x430
[ 369.986320] ? __pfx_cryptomgr_test+0x10/0x10
[ 369.986323] alg_test.part.27+0x103/0x410
[ 369.986326] ? __schedule+0x464/0xfa0
[ 369.986330] ? __pfx_cryptomgr_test+0x10/0x10
[ 369.986333] cryptomgr_test+0x20/0x40
[ 369.986336] kthread+0xda/0x110
[ 369.986344] ? __pfx_kthread+0x10/0x10
[ 369.986346] ret_from_fork+0x2d/0x40
[ 369.986355] ? __pfx_kthread+0x10/0x10
[ 369.986358] ret_from_fork_asm+0x1a/0x30
[ 369.986365] </TASK>
This happens because the only async polling without interrupts that
iaa_crypto currently implements is with the 'sync' mode. With 'async',
iaa_crypto calls to compress/decompress submit the descriptor and return
-EINPROGRESS, without any mechanism in the driver to poll for
completions. Hence callers such as test_acomp() in crypto/testmgr.c or
zswap, that wrap the calls to crypto_acomp_compress() and
crypto_acomp_decompress() in synchronous wrappers, will block
indefinitely. Even before zswap can notice this problem, the crypto
testmgr.c's test_acomp() will fail and prevent registration of
"deflate-iaa" as a valid crypto acomp algorithm, thereby disallowing the
use of "deflate-iaa" as a zswap compress (zswap will fall-back to the
default compressor in this case).
To fix this issue, this patch modifies the iaa_crypto sync_mode set
function to treat 'async' equivalent to 'sync', so that the correct and
only supported driver async polling without interrupts implementation is
enabled, and zswap can use 'deflate-iaa' as the compressor.
Hence, with this patch, this is what will happen:
echo async > /sys/bus/dsa/drivers/crypto/sync_mode
cat /sys/bus/dsa/drivers/crypto/sync_mode
sync
There are no crypto/testmgr.c test_acomp() errors, no call traces and zswap
can use 'deflate-iaa' without any errors. The iaa_crypto documentation has
also been updated to mention this caveat with 'async' and what to expect
with this fix.
True iaa_crypto async polling without interrupts is enabled in patch
"crypto: iaa - Implement batch_compress(), batch_decompress() API in
iaa_crypto." [1] which is under review as part of the "zswap IAA compress
batching" patch-series [2]. Until this is merged, we would appreciate it if
this current patch can be considered for a hotfix.
[1]: https://patchwork.kernel.org/project/linux-mm/patch/20241221063119.29140-5-kanchana.p.sridhar@intel.com/
[2]: https://patchwork.kernel.org/project/linux-mm/list/?series=920084
Fixes: 09646c98d ("crypto: iaa - Add irq support for the crypto async interface")
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The stack frame in libaesgcm_init triggers a size warning on x86-64.
Reduce it by making buf static.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Fix rtla divide by zero when the count is zero in histograms
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ27/phQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qq0bAQDAo1edYG0QGG2cbee1dM0gWiOZqmgZ
y2/FzV64Nq5UfQD9HPXVTv+fF0fHs4DEj3BQI5mSLi5tu7g2zer5FKVSiw0=
=Q2ZB
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tool fix from Steven Rostedt:
- Fix rtla divide by zero when the count is zero in histograms
* tag 'trace-tools-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/timerlat: Fix histogram ALL for zero samples
- IMX: fixed stop condition in single master mode and added
compatible string for errata adherence.
- Microchip: Added support for proper repeated sends and fixed
unnecessary NAKs on empty messages, which caused false bus
detection.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZ28dsRYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1umIwBAPxk3gjuopIhvcer2XrO2Nwgmqhf
DGOnYzMB2NglNGktAP9gN2iLugshkKGpPHZ+hWb63x/vVvFSXRtaVXJtgildBg==
=enai
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.13-rc5
- IMX: fixed stop condition in single master mode and added
compatible string for errata adherence.
- Microchip: Added support for proper repeated sends and fixed
unnecessary NAKs on empty messages, which caused false bus
detection.
Now when destroying the IO queue we call nvme_tcp_stop_io_queues()
twice, nvme_tcp_destroy_io_queues() has an unnecessary call. Here we
try to remove nvme_tcp_destroy_io_queues() and merge it into
nvme_tcp_teardown_io_queues(), simplify the code and align with
nvme-rdma, make it easy to maintaince.
Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Using mutex lock in IO hot path causes the kernel BUG sleeping while
atomic. Shinichiro[1], first encountered this issue while running blktest
nvme/052 shown below:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 996, name: (udev-worker)
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
2 locks held by (udev-worker)/996:
#0: ffff8881004570c8 (mapping.invalidate_lock){.+.+}-{3:3}, at: page_cache_ra_unbounded+0x155/0x5c0
#1: ffffffff8607eaa0 (rcu_read_lock){....}-{1:2}, at: blk_mq_flush_plug_list+0xa75/0x1950
CPU: 2 UID: 0 PID: 996 Comm: (udev-worker) Not tainted 6.12.0-rc3+ #339
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6a/0x90
__might_resched.cold+0x1f7/0x23d
? __pfx___might_resched+0x10/0x10
? vsnprintf+0xdeb/0x18f0
__mutex_lock+0xf4/0x1220
? nvmet_subsys_nsid_exists+0xb9/0x150 [nvmet]
? __pfx_vsnprintf+0x10/0x10
? __pfx___mutex_lock+0x10/0x10
? snprintf+0xa5/0xe0
? xas_load+0x1ce/0x3f0
? nvmet_subsys_nsid_exists+0xb9/0x150 [nvmet]
nvmet_subsys_nsid_exists+0xb9/0x150 [nvmet]
? __pfx_nvmet_subsys_nsid_exists+0x10/0x10 [nvmet]
nvmet_req_find_ns+0x24e/0x300 [nvmet]
nvmet_req_init+0x694/0xd40 [nvmet]
? blk_mq_start_request+0x11c/0x750
? nvme_setup_cmd+0x369/0x990 [nvme_core]
nvme_loop_queue_rq+0x2a7/0x7a0 [nvme_loop]
? __pfx___lock_acquire+0x10/0x10
? __pfx_nvme_loop_queue_rq+0x10/0x10 [nvme_loop]
__blk_mq_issue_directly+0xe2/0x1d0
? __pfx___blk_mq_issue_directly+0x10/0x10
? blk_mq_request_issue_directly+0xc2/0x140
blk_mq_plug_issue_direct+0x13f/0x630
? lock_acquire+0x2d/0xc0
? blk_mq_flush_plug_list+0xa75/0x1950
blk_mq_flush_plug_list+0xa9d/0x1950
? __pfx_blk_mq_flush_plug_list+0x10/0x10
? __pfx_mpage_readahead+0x10/0x10
__blk_flush_plug+0x278/0x4d0
? __pfx___blk_flush_plug+0x10/0x10
? lock_release+0x460/0x7a0
blk_finish_plug+0x4e/0x90
read_pages+0x51b/0xbc0
? __pfx_read_pages+0x10/0x10
? lock_release+0x460/0x7a0
page_cache_ra_unbounded+0x326/0x5c0
force_page_cache_ra+0x1ea/0x2f0
filemap_get_pages+0x59e/0x17b0
? __pfx_filemap_get_pages+0x10/0x10
? lock_is_held_type+0xd5/0x130
? __pfx___might_resched+0x10/0x10
? find_held_lock+0x2d/0x110
filemap_read+0x317/0xb70
? up_write+0x1ba/0x510
? __pfx_filemap_read+0x10/0x10
? inode_security+0x54/0xf0
? selinux_file_permission+0x36d/0x420
blkdev_read_iter+0x143/0x3b0
vfs_read+0x6ac/0xa20
? __pfx_vfs_read+0x10/0x10
? __pfx_vm_mmap_pgoff+0x10/0x10
? __pfx___seccomp_filter+0x10/0x10
ksys_read+0xf7/0x1d0
? __pfx_ksys_read+0x10/0x10
do_syscall_64+0x93/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f565bd1ce11
Code: 00 48 8b 15 09 90 0d 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 d0 ad 01 00 f3 0f 1e fa 80 3d 35 12 0e 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007ffd6e7a20c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000001000 RCX: 00007f565bd1ce11
RDX: 0000000000001000 RSI: 00007f565babb000 RDI: 0000000000000014
RBP: 00007ffd6e7a2130 R08: 00000000ffffffff R09: 0000000000000000
R10: 0000556000bfa610 R11: 0000000000000246 R12: 000000003ffff000
R13: 0000556000bfa5b0 R14: 0000000000000e00 R15: 0000556000c07328
</TASK>
Apparently, the above issue is caused due to using mutex lock while
we're in IO hot path. It's a regression caused with commit 505363957f
("nvmet: fix nvme status code when namespace is disabled"). The mutex
->su_mutex is used to find whether a disabled nsid exists in the config
group or not. This is to differentiate between a nsid that is disabled
vs non-existent.
To mitigate the above issue, we've worked upon a fix[2] where we now
insert nsid in subsys Xarray as soon as it's created under config group
and later when that nsid is enabled, we add an Xarray mark on it and set
ns->enabled to true. The Xarray mark is useful while we need to loop
through all enabled namepsaces under a subsystem using xa_for_each_marked()
API. If later a nsid is disabled then we clear Xarray mark from it and also
set ns->enabled to false. It's only when nsid is deleted from the config
group we delete it from the Xarray.
So with this change, now we could easily differentiate a nsid is disabled
(i.e. Xarray entry for ns exists but ns->enabled is set to false) vs non-
existent (i.e.Xarray entry for ns doesn't exist).
Link: https://lore.kernel.org/linux-nvme/20241022070252.GA11389@lst.de/ [2]
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-nvme/tqcy3sveity7p56v7ywp7ssyviwcb3w4623cnxj3knoobfcanq@yxgt2mjkbkam/ [1]
Fixes: 505363957f ("nvmet: fix nvme status code when namespace is disabled")
Fix-suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Ensure we propagate npwg to the target as well instead
of assuming its the same logical blocks per physical block.
This ensures devices with large IUs information properly
propagated on the target.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvmet_root_discovery_nqn_store treats the subsysnqn string like a fixed
size buffer, even though it is dynamically allocated to the size of the
string.
Create a new string with kstrndup instead of using the old buffer.
Reported-by: syzbot+ff4aab278fa7e27e0f9e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff4aab278fa7e27e0f9e
Fixes: 95409e277d ("nvmet: implement unique discovery NQN")
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently dot2k treats all events equally and registers them with a
general da_handle_event. This is however just part of the work because
some events are necessary to understand when the monitor is entering the
initial state.
Specifically, the da_handle_start_event takes care of setting the
monitor in the initial state and da_handle_start_run_event also
registers the current event in the newly enabled monitor.
da_handle_start_event can be used on events that only lead to the
initial state (as it is currently done in the example monitors), while
da_handle_start_run_event could be used on events that are only valid
from the initial one.
Failing to set at least one of those functions to handle events makes
the monitor useless, since it will never be activated.
This patch adapts dot2k to parse the events that surely lead to the
initial state and set da_handle_start_event for those, if no such event
is found but some events are only valid in the initial event, we instead
set da_handle_start_run_event (it isn't necessary to set both).
We still add a comment to warn the user to make sure this change is
matching the model definition.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20241227144752.362911-9-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
dot2k suggests a list of changes to the kernel tree while adding a
monitor: edit tracepoints header, Makefile, Kconfig and moving the
monitor folder. Those changes can be easily run automatically.
Add a flag to dot2k to alter the kernel source.
The kernel source directory can be either assumed from the PWD, or from
the running kernel, if installed.
This feature works best if the kernel tree is a git repository, so that
its easier to make sure there are no unintended changes.
The main RV files (e.g. Makefile) have now a comment placeholder that
can be useful for manual editing (e.g. to know where to add new
monitors) and it is used by the script to append the required lines.
We also slightly adapt the file handling functions in dot2k: __open_file
is now called __read_file and also closes the file before returning the
content; __create_file is now a more general __write_file, we no longer
return on FileExistsError (not thrown while opening), a new
__create_file simply calls __write_file specifying the monitor folder in
the path.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20241227144752.362911-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
802.2+LLC+SNAP frames received by napi_complete_done with GRO and DSA
have skb->transport_header set two bytes short, or pointing 2 bytes
before network_header & skb->data. As snap_rcv expects transport_header
to point to SNAP header (OID:PID) after LLC processing advances offset
over LLC header (llc_rcv & llc_fixup_skb), code doesn't find a match
and packet is dropped.
Between napi_complete_done and snap_rcv, transport_header is not used
until __netif_receive_skb_core, where originally it was being reset.
Commit fda55eca5a ("net: introduce skb_transport_header_was_set()")
only does so if not set, on the assumption the value was set correctly
by GRO (and also on assumption that "network stacks usually reset the
transport header anyway"). Afterwards it is moved forward by
llc_fixup_skb.
Locally generated traffic shows up at __netif_receive_skb_core with no
transport_header set and is processed without issue. On a setup with
GRO but no DSA, transport_header and network_header are both set to
point to skb->data which is also correct.
As issue is LLC specific, to avoid impacting non-LLC traffic, and to
follow up on original assumption made on previous code change,
llc_fixup_skb to reset the offset after skb pull. llc_fixup_skb
assumes the LLC header is at skb->data, and by definition SNAP header
immediately follows.
Fixes: fda55eca5a ("net: introduce skb_transport_header_was_set()")
Signed-off-by: Antonio Pastor <antonio.pastor@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241225010723.2830290-1-antonio.pastor@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=S2EE
-----END PGP SIGNATURE-----
Merge tag 'nf-24-12-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains one Netfilter fix for net:
1) Fix unaligned atomic read on struct nft_set_ext in nft_set_hash
backend that causes an alignment failure splat on aarch64. This
is related to a recent fix and it has been reported via the
regressions mailing list.
* tag 'nf-24-12-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_hash: unaligned atomic read on struct nft_set_ext
====================
Link: https://patch.msgid.link/20241224233109.361755-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch reduces and simplifies the manual steps still needed in
creating a new RV monitor.
It extends the dot2k script to create a tracepoint snippet and a
Kconfig file for the newly generated monitor. Those files can be kept
in the monitor's directory but shall be included in the main tracepoint
header and Kconfig.
Together with the checklist, dot2k now suggests the lines to add to
those files for inclusion and the Makefile line to compile the new
monitor:
Writing the monitor into the directory monitor_name
Almost done, checklist
- Edit the monitor_name/monitor_name.c to add the instrumentation
- Edit kernel/trace/rv/rv_trace.h:
Add this line where other tracepoints are included and DA_MON_EVENTS_ID is defined:
#include <monitors/monitor_name/monitor_name_trace.h>
- Edit kernel/trace/rv/Makefile:
Add this line where other monitors are included:
obj-$(CONFIG_RV_MON_MONITOR_NAME) += monitors/monitor_name/monitor_name.o
- Edit kernel/trace/rv/Kconfig:
Add this line where other monitors are included:
source "kernel/trace/rv/monitors/monitor_name/Kconfig"
- Move monitor_name/ to the kernel's monitor directory (kernel/trace/rv/monitors)
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20241227144752.362911-7-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
While creating a new monitor in RV, besides generating code from dot2k,
there are a few manual steps which can be tedious and error prone, like
adding the tracepoints, makefile lines and kconfig.
This patch restructures the existing monitors to keep some files in the
monitor's folder itself, which can be automatically generated by future
versions of dot2k.
Monitors have now their own Kconfig and tracepoint snippets. For
simplicity, the main tracepoint definition, is moved to the RV
directory, it defines only the tracepoint classes and includes the
monitor-specific tracepoints, which reside in the monitor directory.
Tracepoints and Kconfig no longer need to be copied and adapted from
existing ones but only need to be included in the main files.
The Makefile remains untouched since there's little advantage in having
a separated Makefile for each monitor with a single line and including
it in the main RV Makefile.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20241227144752.362911-6-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The dot2k command includes options to set a model name with -n and a
description with -D, however those are not used in practice.
This patch allows to specify a custom model name (by default the name of
the dot file without extension) and a description which overrides the
one in the C file.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20241227144752.362911-5-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The dot2k templates currently have variables that are automatically
filled by the script marked as an uppercase VARIABLE. This requires some
care while adding new variables to avoid using valid keywords and get
them unexpectedly substituted.
This patch switches the variables to the %%VARIABLE%% notation to make
the pattern substitution more robust.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20241227144752.362911-4-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Two operations didn't have a small description. It looks like something
that has been missed in the original commit introducing this file.
Replace the two "todo" by a small and simple description: Create/Destroy
subflow.
While at it, also uniform the capital letters, avoid double spaces, and
fix the "announce" event description: a new "address" has been
announced, not a new "subflow".
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-3-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rendered version of the MPTCP events [1] looked strange, because the
whole content of the 'doc' was displayed in the same block.
It was then not clear that the first words, not even ended by a period,
were the attributes that are defined when such events are emitted. These
attributes have now been moved to the end, prefixed by 'Attributes:' and
ended with a period. Note that '>-' has been added after 'doc:' to allow
':' in the text below.
The documentation in the UAPI header has been auto-generated by:
./tools/net/ynl/ynl-regen.sh
Link: https://docs.kernel.org/networking/netlink_spec/mptcp_pm.html#event-type [1]
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-2-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This attribute is added with the 'created' and 'established' events, but
the documentation didn't mention it.
The documentation in the UAPI header has been auto-generated by:
./tools/net/ynl/ynl-regen.sh
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-1-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add close() callback in vas_vm_ops struct for proper cleanup
Thanks to: Haren Myneni
-----BEGIN PGP SIGNATURE-----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=grGb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Madhavan Srinivasan:
- Add close() callback in vas_vm_ops struct for proper cleanup
Thanks to Haren Myneni.
* tag 'powerpc-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/vas: Add close() callback in vas_vm_ops struct
- tracing/kprobes: Change the priority of the module callback of kprobe
events so that it is called after the jump label list on the module is
updated. This ensures the kprobe can check whether it is not on the
jump label address correctly.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmduAMgbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bJ6YH/2QBkWNTe3qjxdPsTxJ2
MyL2PO8tMwZbNSyYZ1yGnbguWUUKVkuiheS/qWhLNpuVEyb6Q9/Zuifh5rFqDbf0
Ug3YvsP7gQurmqDm1NGlnMic3zlmZaYDtXCKB+kiA3HO3iP92zesTJlasiok3aSd
sQphxUzmG41BQUDN5/LktGjVb5juf3Xq6i6bdCd6wunUbGWCEE+XmFrg1oVnutES
GTckUGswUBGbgkcVPc07UfKZpNzZdyZlmbVfOISCdYIAddUKftATN7SaUrM29oqC
/lkUcxeXSVXBIUkbA1p50nfjYzTWNeXG92WrvMrRZjNivyMf/nUJnxrlHsv5h2Dy
gtI=
=d3Zj
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
"Change the priority of the module callback of kprobe events so that it
is called after the jump label list on the module is updated.
This ensures the kprobe can check whether it is not on the jump label
address correctly"
* tag 'probes-fixes-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobe: Make trace_kprobe's module callback called after jump_label update
- Add "const" to "char *" in event structure field that gets assigned
literals.
- Check size of input passed into the tracing cpumask file.
If a too large of an input gets passed into the cpumask file, it could
trigger a warning in the bitmask parsing code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ21olxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnslAQDnmQWF3nNa209A9FOvyZmXxDYE/Ymc
YEAMsuD2ehGu4gEA/LnVBkN0fsm5f5+eUWBgnmYy3C1nW6oiwYamjFU5cAQ=
=u2Fh
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two minor tracing fixes:
- Add "const" to "char *" in event structure field that gets assigned
literals.
- Check size of input passed into the tracing cpumask file.
If a too large of an input gets passed into the cpumask file, it
could trigger a warning in the bitmask parsing code"
* tag 'trace-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Prevent bad count for tracing_cpumask_write
tracing: Constify string literal data member in struct trace_event_call
The CPU-to-SDHC interconnect path for the SDHC_2 needs to have the
active-only tags. The tags are missing entirely on for the SDHC_4
controller interconnect paths.
Fix all tags for both controllers.
Fixes: ffb21c1e19 ("arm64: dts: qcom: x1e80100: Describe the SDHC controllers")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241227-b4-x1e80100-qcp-sdhc-fixes-v1-1-cd971f7f0955@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
dot2k has 3 templates, one per monitor type, but the only difference
among them is the `DECLARE_DA_MON_*` call, keeping 3 almost identical
templates requires more work whenever we introduce a change.
This patch removes the 3 dot2k templates and replaces them with a
generic one, we then adjust the model type from the script.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20241227144752.362911-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
dot2k can be run as installed (e.g. make install) or from the kernel
tree. In the former case it looks for templates in a known location; in
the latter, the PWD has to be `<linux>/tools/verification` to properly
import python modules. The current version looks for the template
in a wrong directory in this latter case.
This patch adjusts the directory where dot2k looks for templates if run
from the kernel tree (i.e. not installed).
Additionally we fix a few simple pylint warnings in boolean expressions.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20241227144752.362911-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
A previous commit mistakenly moved the clearing of the in-progress byte
count into the section that's dependent on having a cached iovec or not,
but it should be cleared for any IO. If not, then extra bytes may be
added at IO completion time, causing potentially weird behavior like
over-reporting the amount of IO done.
Fixes: d7f11616ed ("io_uring/rw: Allocate async data through helper")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202412271132.a09c3500-lkp@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's a pointer, don't use 0 for that. sparse throws a warning for that,
as the kernel test robot noticed.
Fixes: d7f11616ed ("io_uring/rw: Allocate async data through helper")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412180253.YML3qN4d-lkp@intel.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit changed overwriting kiocb->ki_flags with
->f_iocb_flags with masking it in. This breaks for retry situations,
where we don't necessarily want to retain previously set flags, like
IOCB_NOWAIT.
The use case needs IOCB_HAS_METADATA to be persistent, but the change
makes all flags persistent, which is an issue. Add a request flag to
track whether the request has metadata or not, as that is persistent
across issues.
Fixes: 59a7d12a7f ("io_uring: introduce attributes for read/write and PI support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two remaining uses of the old async data allocator that do not
rely on the alloc cache. I don't want to make them use the new
allocator helper because that would require a if(cache) check, which
will result in dead code for the cached case (for callers passing a
cache, gcc can't prove the cache isn't NULL, and will therefore preserve
the check. Since this is an inline function and just a few lines long,
keep a second helper to deal with cases where we don't have an async
data cache.
No functional change intended here. This is just moving the helper
around and making it inline.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20241216204615.759089-9-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This helper replaces io_alloc_async_data by using the folded allocation.
Do it in a header to allow the compiler to decide whether to inline.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20241216204615.759089-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
