This documents EL3 requirements for debug architecture. The register field
MDCR_EL3.TDA needs to be cleared for accesses into debug registers without
any trap being generated into EL3. CPU debug registers like DBGBCR<n>_EL1,
DBGBVR<n>_EL1, DBGWCR<n>_EL1, DBGWVR<n>_EL1 and MDSCR_EL1 are already being
accessed for HW breakpoint, watchpoint and debug monitor implementations on
the platform.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20241211065425.1106683-2-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Fabrice Gasnier found and fixed a regression I introduced with v6.13-rc1
when converting the stm32 pwm driver to support the new waveform stuff.
On some hardware variants this completely broke the driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmdj+fAACgkQj4D7WH0S
/k4I3QgAr4NqinQm3WrdNG2bTzTbd0TkBZDjm42l8A++v0ax+tqNlbh8SyF0jIw3
mlC/SSpAZGZJV8+uyJrjR4324DGLhGm0hfZxb5ijhbB0lI/VWmS8DorZGTmhplzX
mtfML9DL/mAfxqXSIhxaZgSnFfnajrx+8Gr7TqLaUUxXMt+7bWvIRxi2zNS+H9DR
acd2DJGxAG7hTHWyR/F8YYudQbZh/JNI29WRmDaf4ZzJCNe6/qFTd28tFOQ7MP0+
Gr6bhnnfZaP/2Mg1OJpHo+vG8d1bJXnnmwlPAmR4hccT94wtss5AsN6wzBlxXptW
x51wDv0hld/rz0Z8ojOqz1CY3PMdTw==
=i/KE
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.13-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix regression in pwm-stm32 driver when converting to new waveform
support
Fabrice Gasnier found and fixed a regression I introduced with
v6.13-rc1 when converting the stm32 pwm driver to support the new
waveform stuff. On some hardware variants this completely broke the
driver"
* tag 'pwm/for-6.13-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Fix complementary output in round_waveform_tohw()
-----BEGIN PGP SIGNATURE-----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=vUtk
-----END PGP SIGNATURE-----
Merge tag 'v6.13-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Two fixes for better handling maximum outstanding requests
- Fix simultaneous negotiate protocol race
* tag 'v6.13-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: conn lock to serialize smb2 negotiate
ksmbd: fix broken transfers when exceeding max simultaneous operations
ksmbd: count all requests in req_running counter
If a PCIe port only supports a single speed, enabling bandwidth control
is pointless: There's no need to monitor autonomous speed changes, nor
can the speed be changed.
Not enabling it saves a small amount of memory and compute resources,
but also fixes a boot hang reported by Niklas: It occurs when enabling
bandwidth control on Downstream Ports of Intel JHL7540 "Titan Ridge 2018"
Thunderbolt controllers. The ports only support 2.5 GT/s in accordance
with USB4 v2 sec 11.2.1, so the present commit works around the issue.
PCIe r6.2 sec 8.2.1 prescribes that:
"A device must support 2.5 GT/s and is not permitted to skip support
for any data rates between 2.5 GT/s and the highest supported rate."
Consequently, bandwidth control is currently only disabled if a port
doesn't support higher speeds than 2.5 GT/s. However the Implementation
Note in PCIe r6.2 sec 7.5.3.18 cautions:
"It is strongly encouraged that software primarily utilize the
Supported Link Speeds Vector instead of the Max Link Speed field,
so that software can determine the exact set of supported speeds on
current and future hardware. This can avoid software being confused
if a future specification defines Links that do not require support
for all slower speeds."
In other words, future revisions of the PCIe Base Spec may allow gaps
in the Supported Link Speeds Vector. To be future-proof, don't just
check whether speeds above 2.5 GT/s are supported, but rather check
whether *more than one* speed is supported.
Fixes: 665745f274 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Closes: https://lore.kernel.org/r/db8e457fcd155436449b035e8791a8241b0df400.camel@kernel.org
Link: https://lore.kernel.org/r/3564908a9c99fc0d2a292473af7a94ebfc8f5820.1734428762.git.lukas@wunner.de
Reported-by: Niklas Schnelle <niks@kernel.org>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jonathan Cameron <Jonthan.Cameron@huawei.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Supported Link Speeds Vector in the Link Capabilities 2 Register
indicates the *supported* link speeds. The Max Link Speed field in the
Link Capabilities Register indicates the *maximum* of those speeds.
pcie_get_supported_speeds() neglects to honor the Max Link Speed field and
will thus incorrectly deem higher speeds as supported. Fix it.
One user-visible issue addressed here is an incorrect value in the sysfs
attribute "max_link_speed".
But the main motivation is a boot hang reported by Niklas: Intel JHL7540
"Titan Ridge 2018" Thunderbolt controllers supports 2.5-8 GT/s speeds,
but indicate 2.5 GT/s as maximum. Ilpo recalls seeing this on more
devices. It can be explained by the controller's Downstream Ports
supporting 8 GT/s if an Endpoint is attached, but limiting to 2.5 GT/s
if the port interfaces to a PCIe Adapter, in accordance with USB4 v2
sec 11.2.1:
"This section defines the functionality of an Internal PCIe Port that
interfaces to a PCIe Adapter. [...]
The Logical sub-block shall update the PCIe configuration registers
with the following characteristics: [...]
Max Link Speed field in the Link Capabilities Register set to 0001b
(data rate of 2.5 GT/s only).
Note: These settings do not represent actual throughput. Throughput
is implementation specific and based on the USB4 Fabric performance."
The present commit is not sufficient on its own to fix Niklas' boot hang,
but it is a prerequisite: A subsequent commit will fix the boot hang by
enabling bandwidth control only if more than one speed is supported.
The GENMASK() macro used herein specifies 0 as lowest bit, even though
the Supported Link Speeds Vector ends at bit 1. This is done on purpose
to avoid a GENMASK(0, 1) macro if Max Link Speed is zero. That macro
would be invalid as the lowest bit is greater than the highest bit.
Ilpo has witnessed a zero Max Link Speed on Root Complex Integrated
Endpoints in particular, so it does occur in practice. (The Link
Capabilities Register is optional on RCiEPs per PCIe r6.2 sec 7.5.3.)
Fixes: d2bd39c045 ("PCI: Store all PCIe Supported Link Speeds")
Closes: https://lore.kernel.org/r/70829798889c6d779ca0f6cd3260a765780d1369.camel@kernel.org
Link: https://lore.kernel.org/r/fe03941e3e1cc42fb9bf4395e302bff53ee2198b.1734428762.git.lukas@wunner.de
Reported-by: Niklas Schnelle <niks@kernel.org>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
With DEFER_TASKRUN, we know the ring can't be both waited upon and
resized at the same time. This is important for CQ resizing. Allowing SQ
ring resizing is more trivial, but isn't the interesting use case. Hence
limit ring resizing in general to DEFER_TASKRUN only for now. This isn't
a huge problem as CQ ring resizing is generally the most useful on
networking type of workloads where it can be hard to size the ring
appropriately upfront, and those should be using DEFER_TASKRUN for
better performance.
Fixes: 79cfe9e59c ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit
746ae46c11 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM")
amdgpu started seeing the following warning:
[ ] workqueue: WQ_MEM_RECLAIM sdma0:drm_sched_run_job_work [gpu_sched] is flushing !WQ_MEM_RECLAIM events:amdgpu_device_delay_enable_gfx_off [amdgpu]
...
[ ] Workqueue: sdma0 drm_sched_run_job_work [gpu_sched]
...
[ ] Call Trace:
[ ] <TASK>
...
[ ] ? check_flush_dependency+0xf5/0x110
...
[ ] cancel_delayed_work_sync+0x6e/0x80
[ ] amdgpu_gfx_off_ctrl+0xab/0x140 [amdgpu]
[ ] amdgpu_ring_alloc+0x40/0x50 [amdgpu]
[ ] amdgpu_ib_schedule+0xf4/0x810 [amdgpu]
[ ] ? drm_sched_run_job_work+0x22c/0x430 [gpu_sched]
[ ] amdgpu_job_run+0xaa/0x1f0 [amdgpu]
[ ] drm_sched_run_job_work+0x257/0x430 [gpu_sched]
[ ] process_one_work+0x217/0x720
...
[ ] </TASK>
The intent of the verifcation done in check_flush_depedency is to ensure
forward progress during memory reclaim, by flagging cases when either a
memory reclaim process, or a memory reclaim work item is flushed from a
context not marked as memory reclaim safe.
This is correct when flushing, but when called from the
cancel(_delayed)_work_sync() paths it is a false positive because work is
either already running, or will not be running at all. Therefore
cancelling it is safe and we can relax the warning criteria by letting the
helper know of the calling context.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: fca839c00a ("workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue")
References: 746ae46c11 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM")
Cc: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Tejun Heo <tj@kernel.org>
Before, every time fdinfo is queried we try to lock all the BOs in the
VM and calculate memory usage from scratch. This works okay if the
fdinfo is rarely read and the VMs don't have a ton of BOs. If either of
these conditions is not true, we get a massive performance hit.
In this new revision, we track the BOs as they change states. This way
when the fdinfo is queried we only need to take the status lock and copy
out the usage stats with minimal impact to the runtime performance. With
this new approach however, we would no longer be able to track active
buffers.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-6-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
amdgpu_vm_bo_invalidate doesn't use the adev parameter and not all
callers have a reference to adev handy, so remove it for cleanliness.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-5-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Define how to handle buffers with multiple possible placement so we
don't get incompatible implementations. Callout the resident requirement
for drm-purgeable- explicitly. Remove the requirement for there to be
only drm-memory- or only drm-resident-, it's not what's implemented and
having both is better for back-compat. Also re-order the paragraphs to
flow better.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-4-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
When memory stats is generated fresh everytime by going though all the
BOs, their active information is quite easy to get. But if the stats are
tracked with BO's state this becomes harder since the job scheduling
part doesn't really deal with individual buffers.
Make drm-active- optional to enable amdgpu to switch to the second
method.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-3-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Add a helper to check if the memory stats is zero, this will be used to
check for memory accounting errors.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-2-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
The imx93 is the first supported DDR PMU that supports read transaction,
write transaction and read beats events which corresponding respecitively
to counter 2, 3 and 4.
However, transaction-based AXI match has low accuracy when get total bits
compared to beats-based. And imx93 doesn't assign AXI_ID to each master.
So axi filter is not used widely on imx93. This could be regards as AXI
filter version 1.
To improve the AXI filter capability, imx95 supports 1 read beats and 3
write beats event which corresponding respecitively to counter 2-5. imx95
also detailed AXI_ID allocation so that most of the master could be count
individually. This could be regards as AXI filter version 2.
This will introduce AXI filter version to refactor the driver and support
better extension, such as coming imx943. This is also a potential fix on
imx91 when configure axi filter.
Fixes: 44798fe136 ("perf: imx_perf: add support for i.MX91 platform")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20241212065708.1353513-1-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
The hardware limitation "max=19" actually comes from SMMU Command Queue.
So, it'd be more natural for tegra241-cmdqv driver to read it out rather
than hardcoding it itself.
This is not an issue yet for a kernel on a baremetal system, but a guest
kernel setting the queue base/size in form of IPA/gPA might result in a
noncontiguous queue in the physical address space, if underlying physical
pages backing up the guest RAM aren't contiguous entirely: e.g. 2MB-page
backed guest RAM cannot guarantee a contiguous queue if it is 8MB (capped
to VCMDQ_LOG2SIZE_MAX=19). This might lead to command errors when HW does
linear-read from a noncontiguous queue memory.
Adding this extra IDR1.CMDQS cap (in the guest kernel) allows VMM to set
SMMU's IDR1.CMDQS=17 for the case mentioned above, so a guest-level queue
will be capped to maximum 2MB, ensuring a contiguous queue memory.
Fixes: a3799717b8 ("iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift")
Reported-by: Ian Kalinowski <ikalinowski@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20241219051421.1850267-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The newly introduced arm_lpae_concat_mandatory() function reads the
ias/oas fields from the 'io_pgtable_cfg' copy embedded inside the
'arm_lpae_io_pgtable' structure. However, this copy is not set until
later in alloc_io_pgtable_ops() after the alloc() function has been
called.
Use the address sizes passed in the 'io_pgtable_cfg' structure when
deciding whether or not to concatenate the PGD.
Fixes: 4dcac8407f ("iommu/io-pgtable-arm: Fix stage-2 concatenation with 16K")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241215200412.561400-1-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Add MSM8917 compatible string with "qcom,msm-iommu-v1" as fallback
for the MSM8917 IOMMU which is compatible with Qualcomm's secure
fw "SMMU v1" implementation.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20241215-msm8917-v9-4-bacaa26f3eef@mainlining.org
Signed-off-by: Will Deacon <will@kernel.org>
Remove the redundant .hwapic_irr_update() ops.
If a vCPU has APICv enabled, KVM updates its RVI before VM-enter to L1
in vmx_sync_pir_to_irr(). This guarantees RVI is up-to-date and aligned
with the vIRR in the virtual APIC. So, no need to update RVI every time
the vIRR changes.
Note that KVM never updates vmcs02 RVI in .hwapic_irr_update() or
vmx_sync_pir_to_irr(). So, removing .hwapic_irr_update() has no
impact to the nested case.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241111085947.432645-1-chao.gao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the handling of a nested posted interrupt notification that is
unblocked by nested VM-Enter (unblocks L1 IRQs when ack-on-exit is enabled
by L1) from VM-Enter emulation to vmx_check_nested_events(). To avoid a
pointless forced immediate exit, i.e. to not regress IRQ delivery latency
when a nested posted interrupt is pending at VM-Enter, block processing of
the notification IRQ if and only if KVM must block _all_ events. Unlike
injected events, KVM doesn't need to actually enter L2 before updating the
vIRR and vmcs02.GUEST_INTR_STATUS, as the resulting L2 IRQ will be blocked
by hardware itself, until VM-Enter to L2 completes.
Note, very strictly speaking, moving the IRQ from L2's PIR to IRR before
entering L2 is still technically wrong. But, practically speaking, only
an L1 hypervisor or an L0 userspace that is deliberately checking event
priority against PIR=>IRR processing can even notice; L2 will see
architecturally correct behavior, as KVM ensures the VM-Enter is finished
before doing anything that would effectively preempt the PIR=>IRR movement.
Reported-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241101191447.1807602-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use vmcs01's execution controls shadow to check for IRQ/NMI windows after
a successful nested VM-Enter, instead of snapshotting the information prior
to emulating VM-Enter. It's quite difficult to see that the entire reason
controls are snapshot prior nested VM-Enter is to read them from vmcs01
(vmcs02 is loaded if nested VM-Enter is successful).
That could be solved with a comment, but explicitly using vmcs01's shadow
makes the code self-documenting to a certain extent.
No functional change intended (vmcs01's execution controls must not be
modified during emulation of nested VM-Enter).
Link: https://lore.kernel.org/r/20241101191447.1807602-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the manual check for a pending IRQ in vmcs01's RVI field during
nested VM-Enter, as the recently added call to kvm_apic_has_interrupt()
when checking for pending events after successful VM-Enter is a superset
of the RVI check (IRQs that are pending in RVI are also pending in L1's
IRR).
Link: https://lore.kernel.org/r/20241101191447.1807602-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly check for a pending INIT or SIPI after entering non-root mode
during nested VM-Enter emulation, as no VMCS information is quered as part
of the check, i.e. there is no need to check for INIT/SIPI while vmcs01 is
still loaded.
Link: https://lore.kernel.org/r/20241101191447.1807602-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Always request pending event evaluation after successful nested VM-Enter
if L1 has a pending IRQ, as KVM will effectively do so anyways when APICv
is enabled, by way of vmx_has_apicv_interrupt(). This will allow dropping
the aforementioned APICv check, and will also allow handling nested Posted
Interrupt processing entirely within vmx_check_nested_events(), which is
necessary to honor priority between concurrent events.
Note, checking for pending IRQs has a subtle side effect, as it results in
a PPR update for L1's vAPIC (PPR virtualization does happen at VM-Enter,
but for nested VM-Enter that affects L2's vAPIC, not L1's vAPIC). However,
KVM updates PPR _constantly_, even when PPR technically shouldn't be
refreshed, e.g. kvm_vcpu_has_events() re-evaluates PPR if IRQs are
unblocked, by way of the same kvm_apic_has_interrupt() check. Ditto for
nested VM-Enter itself, when nested posted interrupts are enabled. Thus,
trying to avoid a PPR update on VM-Enter just to be pedantically accurate
is ridiculous, given the behavior elsewhere in KVM.
Link: https://lore.kernel.org/kvm/20230312180048.1778187-1-jason.cj.chen@intel.com
Closes: https://lore.kernel.org/all/20240920080012.74405-1-mankku@gmail.com
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241101191447.1807602-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Allow toggling other bits in MSR_IA32_RTIT_CTL if the enable bit is being
cleared, the existing logic simply ignores the enable bit. E.g. KVM will
incorrectly reject a write of '0' to stop tracing.
Fixes: bf8c55d8dc ("KVM: x86: Implement Intel PT MSRs read/write emulation")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
[sean: rework changelog, drop stable@]
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241101185031.1799556-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If KVM emulates an EOI for L1's virtual APIC while L2 is active, defer
updating GUEST_INTERUPT_STATUS.SVI, i.e. the VMCS's cache of the highest
in-service IRQ, until L1 is active, as vmcs01, not vmcs02, needs to track
vISR. The missed SVI update for vmcs01 can result in L1 interrupts being
incorrectly blocked, e.g. if there is a pending interrupt with lower
priority than the interrupt that was EOI'd.
This bug only affects use cases where L1's vAPIC is effectively passed
through to L2, e.g. in a pKVM scenario where L2 is L1's depriveleged host,
as KVM will only emulate an EOI for L1's vAPIC if Virtual Interrupt
Delivery (VID) is disabled in vmc12, and L1 isn't intercepting L2 accesses
to its (virtual) APIC page (or if x2APIC is enabled, the EOI MSR).
WARN() if KVM updates L1's ISR while L2 is active with VID enabled, as an
EOI from L2 is supposed to affect L2's vAPIC, but still defer the update,
to try to keep L1 alive. Specifically, KVM forwards all APICv-related
VM-Exits to L1 via nested_vmx_l1_wants_exit():
case EXIT_REASON_APIC_ACCESS:
case EXIT_REASON_APIC_WRITE:
case EXIT_REASON_EOI_INDUCED:
/*
* The controls for "virtualize APIC accesses," "APIC-
* register virtualization," and "virtual-interrupt
* delivery" only come from vmcs12.
*/
return true;
Fixes: c7c9c56ca2 ("x86, apicv: add virtual interrupt delivery support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/kvm/20230312180048.1778187-1-jason.cj.chen@intel.com
Reported-by: Markku Ahvenjärvi <mankku@gmail.com>
Closes: https://lore.kernel.org/all/20240920080012.74405-1-mankku@gmail.com
Cc: Janne Karhunen <janne.karhunen@gmail.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
[sean: drop request, handle in VMX, write changelog]
Tested-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241128000010.4051275-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The group validation logic still somewhat assumes the original CMN-600
case of events counting globally, such that if one tries to group 9
events where the first 8 target a single DTC domain, the 9th will be
rejected because *a* DTC domain is full, even though it might only
target other non-overlapping domains and thus still be schedulable.
Improve matters by only counting the DTCs that the new event actually
needs (as arm_cmn_val_add_event() was already clever enough to do).
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/bdfd1e58dac449e407c5cacfd6bf8577dc0a5899.1733943898.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Commit ef7134c7fc ("smb: client: Fix use-after-free of network namespace.")
fixed a netns UAF by manually enabled socket refcounting
(sk->sk_net_refcnt=1 and sock_inuse_add(net, 1)).
The reason the patch worked for that bug was because we now hold
references to the netns (get_net_track() gets a ref internally)
and they're properly released (internally, on __sk_destruct()),
but only because sk->sk_net_refcnt was set.
Problem:
(this happens regardless of CONFIG_NET_NS_REFCNT_TRACKER and regardless
if init_net or other)
Setting sk->sk_net_refcnt=1 *manually* and *after* socket creation is not
only out of cifs scope, but also technically wrong -- it's set conditionally
based on user (=1) vs kernel (=0) sockets. And net/ implementations
seem to base their user vs kernel space operations on it.
e.g. upon TCP socket close, the TCP timers are not cleared because
sk->sk_net_refcnt=1:
(cf. commit 151c9c724d ("tcp: properly terminate timers for kernel sockets"))
net/ipv4/tcp.c:
void tcp_close(struct sock *sk, long timeout)
{
lock_sock(sk);
__tcp_close(sk, timeout);
release_sock(sk);
if (!sk->sk_net_refcnt)
inet_csk_clear_xmit_timers_sync(sk);
sock_put(sk);
}
Which will throw a lockdep warning and then, as expected, deadlock on
tcp_write_timer().
A way to reproduce this is by running the reproducer from ef7134c7fc
and then 'rmmod cifs'. A few seconds later, the deadlock/lockdep
warning shows up.
Fix:
We shouldn't mess with socket internals ourselves, so do not set
sk_net_refcnt manually.
Also change __sock_create() to sock_create_kern() for explicitness.
As for non-init_net network namespaces, we deal with it the best way
we can -- hold an extra netns reference for server->ssocket and drop it
when it's released. This ensures that the netns still exists whenever
we need to create/destroy server->ssocket, but is not directly tied to
it.
Fixes: ef7134c7fc ("smb: client: Fix use-after-free of network namespace.")
Cc: stable@vger.kernel.org
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Repeating automatically selected options in Kconfig files is redundant, so
let's delete repeated "select NETFS_SUPPORT" that was added accidentally.
Fixes: 69c3c023af ("cifs: Implement netfslib hooks")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace default hardcoded value for cifsAttrs with ATTR_ARCHIVE macro
Use SMB2_LEASE_KEY_SIZE macro for leasekey size in smb2_lease_break
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit baf4afc583 ("drm/sched: Improve teardown documentation")
added a list of drm_sched_fini()'s problems. The list triggers htmldocs
warning (but renders correctly in htmldocs output):
Documentation/gpu/drm-mm:571: ./drivers/gpu/drm/scheduler/sched_main.c:1359: ERROR: Unexpected indentation.
Separate the list from the preceding paragraph by a blank line to fix
the warning. While at it, also end the aforementioned paragraph by a
colon.
Fixes: baf4afc583 ("drm/sched: Improve teardown documentation")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20241108175655.6d3fcfb7@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
[phasta: Adjust commit message]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217034915.62594-1-bagasdotme@gmail.com
Ido Schimmel says:
====================
net: fib_rules: Add flow label selector support
In some deployments users would like to encode path information into
certain bits of the IPv6 flow label, the UDP source port and the DSCP
and use this information to route packets accordingly.
Redirecting traffic to a routing table based on the flow label is not
currently possible with Linux as FIB rules cannot match on it despite
the flow label being available in the IPv6 flow key.
This patchset extends FIB rules to match on the flow label with a mask.
Future patches will add mask attributes to L4 ports and DSCP matches.
Patches #1-#5 gradually extend FIB rules to match on the flow label.
Patches #6-#7 allow user space to specify a flow label in route get
requests. This is useful for both debugging and testing.
Patch #8 adjusts the fib6_table_lookup tracepoint to print the flow
label to the trace buffer for better observability.
Patch #9 extends the FIB rule selftest with flow label test cases while
utilizing the route get functionality from patch #6.
====================
Link: https://patch.msgid.link/20241216171201.274644-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests for the new FIB rule flow label selector. Test both good and bad
flows and with both input and output routes.
# ./fib_rule_tests.sh
IPv6 FIB rule tests
[...]
TEST: rule6 check: flowlabel redirect to table [ OK ]
TEST: rule6 check: flowlabel no redirect to table [ OK ]
TEST: rule6 del by pref: flowlabel redirect to table [ OK ]
TEST: rule6 check: iif flowlabel redirect to table [ OK ]
TEST: rule6 check: iif flowlabel no redirect to table [ OK ]
TEST: rule6 del by pref: iif flowlabel redirect to table [ OK ]
TEST: rule6 check: flowlabel masked redirect to table [ OK ]
TEST: rule6 check: flowlabel masked no redirect to table [ OK ]
TEST: rule6 del by pref: flowlabel masked redirect to table [ OK ]
TEST: rule6 check: iif flowlabel masked redirect to table [ OK ]
TEST: rule6 check: iif flowlabel masked no redirect to table [ OK ]
TEST: rule6 del by pref: iif flowlabel masked redirect to table [ OK ]
[...]
Tests passed: 268
Tests failed: 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The different parameters affecting the IPv6 route lookup are printed to
the trace buffer by the fib6_table_lookup tracepoint. Add the IPv6 flow
label for better observability as it can affect the route lookup both in
terms of multipath hash calculation and policy based routing (FIB
rules). Example:
# echo 1 > /sys/kernel/tracing/events/fib6/fib6_table_lookup/enable
# ip -6 route get ::1 flowlabel 0x12345 ipproto udp sport 12345 dport 54321 &> /dev/null
# cat /sys/kernel/tracing/trace_pipe
ip-358 [010] ..... 44.897484: fib6_table_lookup: table 255 oif 0 iif 1 proto 17 ::/12345 -> ::1/54321 flowlabel 0x12345 tos 0 scope 0 flags 0 ==> dev lo gw :: err 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The default IPv6 multipath hash policy takes the flow label into account
when calculating a multipath hash and previous patches added a flow
label selector to IPv6 FIB rules.
Allow user space to specify a flow label in route get requests by adding
a new netlink attribute and using its value to populate the "flowlabel"
field in the IPv6 flow info structure prior to a route lookup.
Deny the attribute in RTM_{NEW,DEL}ROUTE requests by checking for it in
rtm_to_fib6_config() and returning an error if present.
A subsequent patch will use this capability to test the new flow label
selector in IPv6 FIB rules.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that both IPv4 and IPv6 correctly handle the new flow label
attributes, enable user space to configure FIB rules that make use of
the flow label by changing the policy to stop rejecting them and
accepting 32 bit values in big-endian byte order.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement support for the new flow label selector which allows IPv6 FIB
rules to match on the flow label with a mask. Ensure that both flow
label attributes are specified (or none) and that the mask is valid.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
IPv4 FIB rules cannot match on flow label so reject requests that try to
add such rules. Do that in the IPv4 configure callback as the netlink
policy resides in the core and used by both IPv4 and IPv6.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new FIB rule attributes which will allow user space to match on the
IPv6 flow label with a mask. Temporarily set the type of the attributes
to 'NLA_REJECT' while support is being added in the IPv6 code.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit baf4afc583 ("drm/sched: Improve teardown documentation")
documents problems of drm_sched_fini() in form of a list. The checklist
triggers htmldocs warning (but renders correctly in htmldocs output):
Documentation/gpu/drm-mm:571: ./drivers/gpu/drm/scheduler/sched_main.c:1359: ERROR: Unexpected indentation.
Separate the list from the preceding paragraph by a blank line to fix
the warning. While at it, also end the aforementioned paragraph by a
colon.
Fixes: baf4afc583 ("drm/sched: Improve teardown documentation")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20241108175655.6d3fcfb7@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
[phasta: Adjust commit message]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217034915.62594-1-bagasdotme@gmail.com
Merge the pmdomain fixes for v6.13-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.14.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The genpd device, which is really only used as a handle to lookup
OPP, but not even registered to the device core otherwise and thus
lifetime linked to the genpd struct it is contained in, is missing
a release function. After b8f7bbd1f4 ("pmdomain: core: Add
missing put_device()") the device will be cleaned up going through
the driver core device_release() function, which will warn when no
release callback is present for the device. Add a dummy release
function to shut up the warning.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes: b8f7bbd1f4 ("pmdomain: core: Add missing put_device()")
Cc: stable@vger.kernel.org
Message-ID: <20241218184433.1930532-1-l.stach@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If the user sets the nodrop parameter, print a deprecation warning once.
Hopefully they will come to the mailing list if it is an ABI change.
Now that we have a callback, take this chance to parse the parameter as
a boolean. We still say to userspace that it is a uint to avoid ABI
changes.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241218-uvc-deprecate-v2-4-ab814139e983@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now the parameter value is read during video_registration and
cannot be changed afterwards, despite its permissions 0644, that makes
the user believe that the value can be written.
The parameter only affects the behaviour of uvc_queue_buffer_complete(),
with only one check per buffer.
We can read the value directly from uvc_queue_buffer_complete() and
therefore allowing changing it with sysfs on the fly.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241218-uvc-deprecate-v2-3-ab814139e983@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The module param `nodrop` defines what to do with frames that contain an
error: drop them or sending them to userspace.
The default in the rest of the media subsystem is to return buffers with
an error to userspace with V4L2_BUF_FLAG_ERROR set in v4l2_buffer.flags.
In UVC we drop buffers with errors by default.
Change the default behaviour of uvcvideo to match the rest of the
drivers and maybe get rid of the module parameter in the future.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241218-uvc-deprecate-v2-2-ab814139e983@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now we return VB2_BUF_STATE_DONE for valid and invalid frames. Propagate
the correct value, so the user can know if the frame is valid or not via
struct v4l2_buffer->flags.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://lore.kernel.org/linux-media/84b0f212-cd88-46bb-8e6f-b94ec3eccba6@redhat.com
Fixes: 6998b6fb4b ("[media] uvcvideo: Use videobuf2-vmalloc")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241218-uvc-deprecate-v2-1-ab814139e983@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Asynchronous controls trigger an event when they have completed their
operation.
This can make that the control cached value does not match the value in
the device.
Let's flush the cache to be on the safe side.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241203-uvc-fix-async-v6-5-26c867231118@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Make it explicit that the function is always called with ctrl_mutex
being held.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20241203-uvc-fix-async-v6-4-26c867231118@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
