The connectors enumerated by the GETRESOURCES ioctl may not be fully
initialized yet wrt. to the state set up during connector registration
(for instance the connector's debugfs/sysfs interfaces may not exist
yet). This can happen in two ways:
1. Connectors initialized and added to the
drm_mode_config::connector_list during driver loading will be visible
to the GETRESOURCES ioctl caller once the driver is registered via
drm_dev_register()->drm_minor_register(DRM_MINOR_PRIMARY) and before
the connectors are registered via drm_dev_register()->
drm_modeset_register_all().
2. Dynamic connectors (MST) - after being initialized - may be added to
the connector_list after the driver is loaded and registered and before
the connector's userspace interfaces (debugfs, sysfs etc.) are added
in drm_connector_dynamic_register().
A solution for 1. would be to register the driver only after the
connectors are registered, for 2. to add the connector to connector_list
only after the userspace interfaces are registered.
The fix requires a bigger change, for now adding a FIXME: comment for
it.
v2: Remove references to the patchset from the commit log. (Jani)
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-3-imre.deak@intel.com
Atm when the connector is added to the drm_mode_config::connector_list,
the connector may not be fully initialized yet. This is not a problem
for static connectors initialized/added during driver loading, for which
the driver ensures that look-ups via the above list are not possible
until all the connector and other required state is fully initialized
already. It's also not a problem for user space looking up either a
static or dynamic (see what this is below) connector, since this will be
only possible once the connector is registered.
A dynamic - atm only a DP MST - connector can be initialized and added
after the load time initialization is done. Such a connector may be
looked up by in-kernel users once it's added to the connector list. In
particular a hotplug handler could perform a detection on all the
connectors on the list and hence find a connector there which isn't yet
initialized. For instance the connector's helper hooks may be unset,
leading to a NULL dereference while the detect helper calls the
connector's drm_connector_helper_funcs::detect() or detect_ctx()
handler.
To resolve the above issue, add a way for dynamic connectors to
separately initialize the DRM core specific parts of the connector
without adding it to the connector list - by calling the new
drm_connector_dynamic_init() - and to add the connector to the list
later once all the initialization is complete and the connector is
registered - by calling the new drm_connector_dynamic_register().
Adding the above 2 functions was also motivated to make the distinction
of the interface between static and dynamic connectors clearer: Drivers
should manually initialize and register only dynamic connectors (with
the above 2 functions). A driver should only initialize a static
connector (with one of the drm_connector_init*, drmm_connector_init*
functions) while the registration of the connector will be done
automatically by DRM core.
v2: (Jani)
- Let initing DDC as well via drm_connector_init_core().
- Rename __drm_connector_init to drm_connector_init_core_and_add().
v3:
- Rename drm_connector_init_core() to drm_connector_dynamic_init().
(Sima)
- Instead of exporting drm_connector_add(), move adding the connector
to the registration step via a new drm_connector_dynamic_register().
(Sima)
- Update drm_connector_dynamic_init()'s function documentation and the
commit log according to the above changes.
- Update the commit log describing the problematic scenario during
connector detection. (Maxime)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-2-imre.deak@intel.com
There is a 1:1 correspondance between the list of spi device-ids and the
devicetree compatibles. The latter is ordered alphabetically by vendor
and device. To simplify keeping the two lists in sync, mention the
vendor in a comment for the spi device-ids and order alphabetically,
too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241217114226.1223724-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The header clearly states that it does not want to be included directly,
only via '<linux/bitmap.h>'. Replace the include accordingly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20241217070545.2533-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In cs_dsp_mock_xm_header_drop_from_regmap_cache() for the ADSP2 case read
the big-endian firmware word into a dedicated __be32 variable instead of
using the same u32 for both the big-endian and cpu-endian value.
Fixes: 41e78c0f44 ("firmware: cs_dsp: Add mock DSP memory map for KUnit testing")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241217113127.186736-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The linkDMA should not be released on stop trigger since a stream re-start
might happen without closing of the stream. This leaves a short time for
other streams to 'steal' the linkDMA since it has been released.
This issue is not easy to reproduce under normal conditions as usually
after stop the stream is closed, or the same stream is restarted, but if
another stream got in between the stop and start, like this:
aplay -Dhw:0,3 -c2 -r48000 -fS32_LE /dev/zero -d 120
CTRL+z
aplay -Dhw:0,0 -c2 -r48000 -fS32_LE /dev/zero -d 120
then the link DMA channels will be mixed up, resulting firmware error or
crash.
Fixes: ab5593793e ("ASoC: SOF: Intel: hda: Always clean up link DMA during stop")
Cc: stable@vger.kernel.org
Closes: https://github.com/thesofproject/sof/issues/9695
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241217091019.31798-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for LEDs on AAEON UP boards. These leds are managed by the
onboard FPGA:
- UP boards: yellow, green, red
- UP Squared boards: blue, yellow, green, red
Based on the work done by Gary Wang <garywang@aaeon.com.tw>, largely
rewritten.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241211-aaeon-up-board-pinctrl-support-v1-2-24719be27631@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
The UP boards implement some features (pin controller, LEDs) through an
on-board FPGA.
This MFD driver implements the line protocol to communicate with the FPGA
through regmap, and registers pin controller and led cells.
This commit adds support for UP and UP Squared boards.
Based on the work done by Gary Wang <garywang@aaeon.com.tw>.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241211-aaeon-up-board-pinctrl-support-v1-1-24719be27631@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Other sub-components (da9052-wdt) could use the result to determine
reboot cause. Expose the result by make it part of the da9052 structure.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20241210-da9052-wdt-v2-1-95a5756e9ac8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The max_register = 128 setting in the regmap config is not valid.
The Intel Dollar Cove TI PMIC has an eeprom unlock register at address 0x88
and a number of EEPROM registers at 0xF?. Increase max_register to 0xff so
that these registers can be accessed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241208150028.325349-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Currently the device is powered down in the remove callback, however
all other clean up is done through devres. The problem here is the
MFD children are cleaned up through devres. As this happens after
the remove callback has run, this leads to the incorrect ordering
where the child remove functions run after the device has been powered
down. Put the power down into devres as well such that everything runs
in the expected order.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20241205115822.2371719-4-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Some SoundWire controllers take a very long time to fully power up. As
such, increase the timeout that the cs42l43 driver will wait for the
device to initially appear on the bus.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20241205115822.2371719-3-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
The GPIO framework supports specifying if a GPIO is active low or
high and will invert accordingly. Whilst specifying this is part of
the normal GPIO definition flow on device tree systems, it is a DSD
extension under ACPI, that Windows doesn't really use. This means most
ACPI systems do not set the polarity of the pin.
The current cs42l43 driver assumes it is setting the level of the line
directly, which is actually the case on all current systems and likely
most future ones. However if the part was used in a device tree system
or an ACPI system that actually used the DSD extensions this would get
inverted, causing the driver to fail probe. As the driver always knows
the polarity of its own reset line, use the raw set API making the
intention to set the level directly clear and to avoid any such future
issues.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20241205115822.2371719-2-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Newer bios patch firmware versions now require use of the shadow register
interface, which was previously only required by the full firmware, update
the check accordingly.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20241205115822.2371719-1-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
The sense resistor used for measuring currents is typically some tens of
milli Ohms. It has accidentally been documented to be tens of mega Ohms.
Fix the size of this resistor and a few copy-paste errors while at it.
Drop the unsuitable 'rohm,charger-sense-resistor-ohms' property (which
can't represent resistors smaller than one Ohm), and introduce a new
'rohm,charger-sense-resistor-micro-ohms' property with appropriate
minimum, maximum and default values instead.
Fixes: 4238dc1e64 ("dt_bindings: mfd: Add ROHM BD71815 PMIC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/0efd8e9de0ae8d62ee4c6b78cc565b04007a245d.1731430700.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
On N4100 / N4120 Gemini Lake SoCs the ISA bridge PCI device-id is 31e8
rather the 3197 found on e.g. the N4000 / N4020.
While at fix the existing GLK PCI-id table entry breaking the table
being sorted by device-id.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241114193808.110132-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
The MCU can be found on network-attached-storage devices made by QNAP
and provides access to fan control including reading back its RPM as
well as reading the temperature of the NAS case.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241107114712.538976-8-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
The MCU controls the power-button and beeper, so expose them as input
device. There is of course no interrupt line, so the status of the
power-button needs to be polled. To generate an event the power-button
also needs to be held for 1-2 seconds, so the polling interval does
not need to be overly fast.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20241107114712.538976-7-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
This adds a driver that connects to the qnap-mcu mfd driver and provides
access to the LEDs on it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-6-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
These microcontroller units are used in network-attached-storage devices
made by QNAP and provide additional functionality to the system.
This adds the base driver that implements the serial protocol via
serdev and additionally hooks into the poweroff handlers to turn
off the parts of the system not supplied by the general PMIC.
Turning off (at least the TSx33 devices using Rockchip SoCs) consists of
two separate actions. Turning off the MCU alone does not turn off the main
SoC and turning off only the SoC/PMIC does not turn off the hard-drives.
Also if the MCU is not turned off, the system also won't start again until
it is unplugged from power.
So on shutdown the MCU needs to be turned off separately before the
main PMIC.
The protocol spoken by the MCU is sadly not documented, but was
obtained by listening to the chatter on the serial port, as thankfully
the "hal_app" program from QNAPs firmware allows triggering all/most
MCU actions from the command line.
The implementation of how to talk to the serial device got some
inspiration from the rave-sp servdev driver.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-5-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
These MCUs can be found in network attached storage devices made by QNAP.
They are connected to a serial port of the host device and provide
functionality like LEDs, power-control and temperature monitoring.
LEDs, buttons, etc are all elements of the MCU firmware itself, so don't
need devicetree input, though the fan gets its cooling settings from
a fan-0 subnode.
A binding for the LEDs for setting the linux-default-trigger may come
later, once all the LEDs are understood and ATA controllers actually
can address individual port-LEDs, but are really optional.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241107114712.538976-4-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
The content of the platform_data of a struct mfd_cell is simply passed on
to the platform_device_add_data() call in mfd_add_device() .
platform_device_add_data() already handles the data behind that pointer
as const and also uses kmemdup to create a copy of the data before
handing that copy over to the newly created platform-device,
so there is no reason to not extend this to struct mfd_cell, as the old
copy in the mfd_cell will be stale anyway.
This allows to pass structs gathered from of_device_get_match_data()
as platform-data to sub-devices - which is retrieved as const already.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-3-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
The hid-sensor-hub creates the individual device structs and transfers them
to the created mfd platform-devices via the platform_data in the mfd_cell.
Before e651a1da44 ("HID: hid-sensor-hub: Allow parallel synchronous reads")
the sensor-hub was managing access centrally, with one "completion" in the
hub's data structure, which needed to be finished on removal at the latest.
The mentioned commit then moved this central management to each hid sensor
device, resulting on a completion in each struct hid_sensor_hub_device.
The remove procedure was adapted to go through all sensor devices and
finish any pending "completion".
What this didn't take into account was, platform_device_add_data() that is
used by mfd_add{_hotplug}_devices() does a kmemdup on the submitted
platform-data. So the data the platform-device gets is a copy of the
original data, meaning that the device worked on a different completion
than what sensor_hub_remove() currently wants to access.
To fix that, use device_for_each_child() to go through each child-device
similar to how mfd_remove_devices() unregisters the devices later and
with that get the live platform_data to finalize the correct completion.
Fixes: e651a1da44 ("HID: hid-sensor-hub: Allow parallel synchronous reads")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20241107114712.538976-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for r8a779h0. It is very similar to r8a779g0, but has only
one output.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-7-e77421093c05@ideasonboard.com
Add support for DSI on r8a779h0. As it is identical to DSI on r8a779g0,
all we need is to handle the compatible string.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-6-e77421093c05@ideasonboard.com
Extend the Renesas DSI display bindings to support the r8a779h0 V4M.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-5-e77421093c05@ideasonboard.com
Extend the Renesas DU display bindings to support the r8a779h0 V4M.
Note that we remove the requirement for two ports from the global part
of the bindings, as each conditional part defines the number of required
ports already. This came up with r8a779h0 as it's the first one that has
only one port.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-4-e77421093c05@ideasonboard.com
The binding is missing maxItems for all renesas,cmms and renesas,vsps
properties. As the amount of cmms or vsps is always a fixed amount, set
the maxItems to match the minItems.
Also add the minItems and maxItems to the top level properties.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-3-e77421093c05@ideasonboard.com
Currently the driver always writes DPTSR when setting up the hardware.
However, writing the register is only meaningful when the second source
for a plane is used, and the register is not even documented for SoCs
that do not have the second source.
So move the write behind a condition.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> # On R-Car M3-N
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-2-e77421093c05@ideasonboard.com
The driver checks for bit 16 (using CLOCKSET1_LOCK define) in CLOCKSET1
register when waiting for the PPI clock. However, the right bit to check
is bit 17 (CLOCKSET1_LOCK_PHY define). Not only that, but there's
nothing in the documents for bit 16 for V3U nor V4H.
So, fix the check to use bit 17, and drop the define for bit 16.
Fixes: 155358310f ("drm: rcar-du: Add R-Car DSI driver")
Fixes: 11696c5e89 ("drm: Place Renesas drivers in a separate dir")
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-1-e77421093c05@ideasonboard.com
The trigger_data->hw_control indicates whether the LED is controlled by HW
offload, i.e. the PHY. The trigger_data->hw_control = can_hw_control() is
currently called only from netdev_led_attr_store(), i.e. when writing any
sysfs attribute of the netdev trigger instance associated with a PHY LED.
The can_hw_control() calls validate_net_dev() which internally calls
led_cdev->hw_control_get_device(), which is phy_led_hw_control_get_device()
for PHY LEDs. The phy_led_hw_control_get_device() returns NULL if the PHY
is not attached.
At least in case of DWMAC (STM32MP, iMX8M, ...), the PHY device is attached
only when the interface is brought up and is detached again when the
interface is brought down. In case e.g. udev rules configure the netdev
LED trigger sysfs attributes before the interface is brought up, then when
the interface is brought up, the LEDs are not blinking.
This is because trigger_data->hw_control = can_hw_control() was called
when udev wrote the sysfs attribute files, before the interface was up,
so can_hw_control() resp. validate_net_dev() returned false, and the
trigger_data->hw_control = can_hw_control() was never called again to
update the trigger_data->hw_control content and let the offload take
over the LED blinking.
Call data->hw_control = can_hw_control() from netdev_trig_notify() to
update the offload capability of the LED when the UP notification arrives.
This makes the LEDs blink after the interface is brought up.
On STM32MP13xx with RTL8211F, it is enough to have the following udev rule
in place, boot the machine with cable plugged in, and the LEDs won't work
without this patch once the interface is brought up, even if they should:
"
ACTION=="add", SUBSYSTEM=="leds", KERNEL=="stmmac-0:01:green:wan", ATTR{trigger}="netdev", ATTR{link_10}="1", ATTR{link_100}="1", ATTR{link_1000}="1", ATTR{device_name}="end0"
ACTION=="add", SUBSYSTEM=="leds", KERNEL=="stmmac-0:01:yellow:wan", ATTR{trigger}="netdev", ATTR{rx}="1", ATTR{tx}="1", ATTR{device_name}="end0"
"
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20241216104826.6946-1-marex@denx.de
Signed-off-by: Lee Jones <lee@kernel.org>
fs/file.c should include include/linux/init_task.h for
declaration of init_files. This fixes the sparse warning:
fs/file.c:501:21: warning: symbol 'init_files' was not declared. Should it be static?
Signed-off-by: Zhang Kunbo <zhangkunbo@huawei.com>
Link: https://lore.kernel.org/r/20241217071836.2634868-1-zhangkunbo@huawei.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Similar to the use of $crate::Module, ThisModule should be referred to as
$crate::ThisModule in the macro evaluation. The reason the macro previously
did not cause any errors is because all the users of the macro would use
kernel::prelude::*, bringing ThisModule into scope.
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20241214194242.19505-1-sergeantsagara@protonmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we have generic QDISC_CONGESTED and QDISC_OVERLIMIT drop
reasons, let's have all the qdiscs that contain an AQM apply them
consistently when dropping packets.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241214-fq-codel-drop-reasons-v1-1-2a814e884c37@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The OF node obtained by of_parse_phandle() is not freed. Call
of_node_put() to balance the refcount.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 1676aba5ef ("net: ethernet: bgmac: device tree phy enablement")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241214014912.2810315-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Parthiban Veerasooran says:
====================
Fixes on the OPEN Alliance TC6 10BASE-T1x MAC-PHY support generic lib
This patch series contain the below fixes.
- Infinite loop error when tx credits becomes 0.
- Race condition between tx skb reference pointers.
v2:
- Added mutex lock to protect tx skb reference handling.
v3:
- Added mutex protection in assigning new tx skb to waiting_tx_skb
pointer.
- Explained the possible scenario for the race condition with the time
diagram in the commit message.
v4:
- Replaced mutex with spin_lock_bh() variants as the start_xmit runs in
BH/softirq context which can't take sleeping locks.
====================
Link: https://patch.msgid.link/20241213123159.439739-1-parthiban.veerasooran@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are two skb pointers to manage tx skb's enqueued from n/w stack.
waiting_tx_skb pointer points to the tx skb which needs to be processed
and ongoing_tx_skb pointer points to the tx skb which is being processed.
SPI thread prepares the tx data chunks from the tx skb pointed by the
ongoing_tx_skb pointer. When the tx skb pointed by the ongoing_tx_skb is
processed, the tx skb pointed by the waiting_tx_skb is assigned to
ongoing_tx_skb and the waiting_tx_skb pointer is assigned with NULL.
Whenever there is a new tx skb from n/w stack, it will be assigned to
waiting_tx_skb pointer if it is NULL. Enqueuing and processing of a tx skb
handled in two different threads.
Consider a scenario where the SPI thread processed an ongoing_tx_skb and
it moves next tx skb from waiting_tx_skb pointer to ongoing_tx_skb pointer
without doing any NULL check. At this time, if the waiting_tx_skb pointer
is NULL then ongoing_tx_skb pointer is also assigned with NULL. After
that, if a new tx skb is assigned to waiting_tx_skb pointer by the n/w
stack and there is a chance to overwrite the tx skb pointer with NULL in
the SPI thread. Finally one of the tx skb will be left as unhandled,
resulting packet missing and memory leak.
- Consider the below scenario where the TXC reported from the previous
transfer is 10 and ongoing_tx_skb holds an tx ethernet frame which can be
transported in 20 TXCs and waiting_tx_skb is still NULL.
tx_credits = 10; /* 21 are filled in the previous transfer */
ongoing_tx_skb = 20;
waiting_tx_skb = NULL; /* Still NULL */
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true.
- After oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = 10;
waiting_tx_skb = NULL; /* Still NULL */
- Perform SPI transfer.
- Process SPI rx buffer to get the TXC from footers.
- Now let's assume previously filled 21 TXCs are freed so we are good to
transport the next remaining 10 tx chunks from ongoing_tx_skb.
tx_credits = 21;
ongoing_tx_skb = 10;
waiting_tx_skb = NULL;
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true again.
- In the oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = NULL;
waiting_tx_skb = NULL;
- Now the below bad case might happen,
Thread1 (oa_tc6_start_xmit) Thread2 (oa_tc6_spi_thread_handler)
--------------------------- -----------------------------------
- if waiting_tx_skb is NULL
- if ongoing_tx_skb is NULL
- ongoing_tx_skb = waiting_tx_skb
- waiting_tx_skb = skb
- waiting_tx_skb = NULL
...
- ongoing_tx_skb = NULL
- if waiting_tx_skb is NULL
- waiting_tx_skb = skb
To overcome the above issue, protect the moving of tx skb reference from
waiting_tx_skb pointer to ongoing_tx_skb pointer and assigning new tx skb
to waiting_tx_skb pointer, so that the other thread can't access the
waiting_tx_skb pointer until the current thread completes moving the tx
skb reference safely.
Fixes: 53fbde8ab2 ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames")
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SPI thread wakes up to perform SPI transfer whenever there is an TX skb
from n/w stack or interrupt from MAC-PHY. Ethernet frame from TX skb is
transferred based on the availability tx credits in the MAC-PHY which is
reported from the previous SPI transfer. Sometimes there is a possibility
that TX skb is available to transmit but there is no tx credits from
MAC-PHY. In this case, there will not be any SPI transfer but the thread
will be running in an endless loop until tx credits available again.
So checking the availability of tx credits along with TX skb will prevent
the above infinite loop. When the tx credits available again that will be
notified through interrupt which will trigger the SPI transfer to get the
available tx credits.
Fixes: 53fbde8ab2 ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add interconnect device bindings. These devices can be used
to describe any RPMh and NoC based interconnect devices.
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_interconnects-v3-1-3d9aad4200e9@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Remove "enable-dma" and "bus-id" properties which are both unused in the
kernel and undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The following UBSAN error is reported during boot on the db410c board on
a clang-19 build:
Internal error: UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
...
pc : qnoc_probe+0x5f8/0x5fc
...
The cause of the error is that the counter member was not set before
accessing the annotated flexible array member, but after that. Fix this
by initializing it earlier.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/r/CA+G9fYs+2mBz1y2dAzxkj9-oiBJ2Acm1Sf1h2YQ3VmBqj_VX2g@mail.gmail.com
Fixes: dd4904f3b9 ("interconnect: qcom: Annotate struct icc_onecell_data with __counted_by")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20241203223334.233404-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Retrieve electrical power readings for resources in a computing
environment via diag 0x324. diag 0x324 stores the power readings in the
power information block (pib).
Provide power readings from pib via diag324 ioctl interface. diag324
ioctl provides new pib to the user only if the threshold time has passed
since the last call. Otherwise, cache data is returned. When there are
no active readers, cleanup of pib buffer is performed.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
