Christian Brauner <brauner@kernel.org> says:
Now that we have the preliminaries to lookup struct pid based on its
inode number alone we can implement file handle support.
This is based on custom export operation methods which allows pidfs to
implement permission checking and opening of pidfs file handles cleanly
without hacking around in the core file handle code too much.
* patches from https://lore.kernel.org/r/20241129-work-pidfs-file_handle-v1-0-87d803a42495@kernel.org:
pidfs: implement file handle support
exportfs: add permission method
fhandle: pull CAP_DAC_READ_SEARCH check into may_decode_fh()
exportfs: add open method
fhandle: simplify error handling
pseudofs: add support for export_ops
Link: https://lore.kernel.org/r/20241129-work-pidfs-file_handle-v1-0-87d803a42495@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
On 64-bit platforms, userspace can read the pidfd's inode in order to
get a never-repeated PID identifier. On 32-bit platforms this identifier
is not exposed, as inodes are limited to 32 bits. Instead expose the
identifier via export_fh, which makes it available to userspace via
name_to_handle_at.
In addition we implement fh_to_dentry, which allows userspace to
recover a pidfd from a pidfs file handle.
Signed-off-by: Erin Shepherd <erin.shepherd@e43.eu>
[brauner: patch heavily rewritten]
Link: https://lore.kernel.org/r/20241129-work-pidfs-file_handle-v1-6-87d803a42495@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Co-Developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add the `microchip,sama7d65-pmc` compatible string to the existing binding,
since the SAMA7D65 PMC shares the same properties and clock requirements
as the SAMA7G5.
Export MCK3 and MCK5 to be accessed and referenced in DT to assign to
the clocks property for sama7d65 SoC.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/5252a28531deaee67af1edd8e72d45ca57783464.1733505542.git.Ryan.Wanner@microchip.com
[claudiu.beznea: use tabs instead of spaces in
include/dt-bindings/clock/at91.h]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Since these properties are common for all i2c subnodes,
move them to SoC dtsi from board dts.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20241122080523.3941-2-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The hypercall page is no longer needed. It can be removed, as from the
Xen perspective it is optional.
But, from Linux's perspective, it removes naked RET instructions that
escape the speculative protections that Call Depth Tracking and/or
Untrain Ret are trying to achieve.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Call the Xen hypervisor via the new xen_hypercall_func static-call
instead of the hypercall page.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Add generic hypercall functions usable for all normal (i.e. not iret)
hypercalls. Depending on the guest type and the processor vendor
different functions need to be used due to the to be used instruction
for entering the hypervisor:
- PV guests need to use syscall
- HVM/PVH guests on Intel need to use vmcall
- HVM/PVH guests on AMD and Hygon need to use vmmcall
As PVH guests need to issue hypercalls very early during boot, there
is a 4th hypercall function needed for HVM/PVH which can be used on
Intel and AMD processors. It will check the vendor type and then set
the Intel or AMD specific function to use via static_call().
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
VID 0 is not a valid VLAN according to "802.1Q-2011" "Table 9-2—Reserved
VID values". It is only used to indicate "priority tag" frames which only
contain priority information and no VID.
The 8021q is also redirecting the priority tagged frames to the underlying
interface since commit ad1afb0039 ("vlan_dev: VLAN 0 should be treated as
"no vlan tag" (802.1p packet)"). But at the same time, it automatically
adds the VID 0 to all devices to ensure that VID 0 is in the allowed list
of the HW filter. This resulted in a VLAN 0 which was always announced in
OGM messages.
batman-adv should therefore not create a new batadv_softif_vlan for VID 0
and handle all VID 0 related frames using the "untagged" global/local
translation tables.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The sysfs core now provides callback variants that explicitly take a
const pointer. Use them so the non-const variants can be removed.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-google-v1-4-e5c2808f5833@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The sysfs core now provides callback variants that explicitly take a
const pointer. Use them so the non-const variants can be removed.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-google-v1-3-e5c2808f5833@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-google-v1-2-e5c2808f5833@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-google-v1-1-e5c2808f5833@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Heiner Kallweit says:
====================
r8169: add support for RTL8125D rev.b
Add support for RTL8125D rev.b. Its XID is 0x689. It is basically
based on the one with XID 0x688, but with different firmware file.
To avoid a mess with the version numbering, adjust it first.
====================
Link: https://patch.msgid.link/15c4a9fd-a653-4b09-825d-751964832a7a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for RTL8125D rev.b. Its XID is 0x689. It is basically
based on the one with XID 0x688, but with different firmware file.
Signed-off-by: ChunHao Lin <hau@realtek.com>
[hkallweit1@gmail.com: rebased after adjusted version numbering]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/75e5e9ec-d01f-43ac-b0f4-e7456baf18d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adjust version numbering for RTL8126, so that it doesn't overlap with
new RTL8125 versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/6a354364-20e9-48ad-a198-468264288757@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a check for NULL at the start of create_txqs() and
create_rxqs() which tess if "nic_dev->txqs" is non-NULL. The
intention is that if the device is already open and the queues
are already created then we don't create them a second time.
However, the bug is that if we have an error in the create_txqs()
then the pointer doesn't get set back to NULL. The NULL check
at the start of the function will say that it's already open when
it's not and the device can't be used.
Set ->txqs back to NULL on cleanup on error.
Fixes: c3e79baf1b ("net-next/hinic: Add logical Txq and Rxq")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0cc98faf-a0ed-4565-a55b-0fa2734bc205@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Small follow-up to align this to an equivalent behavior as the bond driver.
The change in 3625920b62 ("teaming: fix vlan_features computing") removed
the netdevice vlan_features when there is no team port attached, yet it
leaves the full set of enc_features intact.
Instead, leave the default features as pre 3625920b62, and recompute once
we do have ports attached. Also, similarly as in bonding case, call the
netdev_base_features() helper on the enc_features.
Fixes: 3625920b62 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241213123657.401868-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Anna Emese Nyiri says:
====================
Add support for SO_PRIORITY cmsg
Introduce a new helper function, `sk_set_prio_allowed`,
to centralize the logic for validating priority settings.
Add support for the `SO_PRIORITY` control message,
enabling user-space applications to set socket priority
via control messages (cmsg).
====================
Link: https://patch.msgid.link/20241213084457.45120-1-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit 6fd1d51cfa ("net: SO_RCVMARK socket option
for SO_MARK with recvmsg()").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend cmsg_sender.c with a new option '-Q' to send SO_PRIORITY
ancillary data.
cmsg_so_priority.sh script added to validate SO_PRIORITY behavior
by creating VLAN device with egress QoS mapping and testing packet
priorities using flower filters. Verify that packets with different
priorities are correctly matched and counted by filters for multiple
protocols and IP versions.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-4-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Linux socket API currently allows setting SO_PRIORITY at the
socket level, applying a uniform priority to all packets sent through
that socket. The exception to this is IP_TOS, when the priority value
is calculated during the handling of
ancillary data, as implemented in commit f02db315b8 ("ipv4: IP_TOS
and IP_TTL can be specified as ancillary data").
However, this is a computed
value, and there is currently no mechanism to set a custom priority
via control messages prior to this patch.
According to this patch, if SO_PRIORITY is specified as ancillary data,
the packet is sent with the priority value set through
sockc->priority, overriding the socket-level values
set via the traditional setsockopt() method. This is analogous to
the existing support for SO_MARK, as implemented in
commit c6af0c227a ("ip: support SO_MARK cmsg").
If both cmsg SO_PRIORITY and IP_TOS are passed, then the one that
takes precedence is the last one in the cmsg list.
This patch has the side effect that raw_send_hdrinc now interprets cmsg
IP_TOS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-3-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplify priority setting permissions with the 'sk_set_prio_allowed'
function, centralizing the validation logic. This change is made in
anticipation of a second caller in a following patch.
No functional changes.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-2-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the missing phys-binding attr to the mctp-attrs in the rt_link spec.
This fixes commit 580db513b4 ("net: mctp: Expose transport binding
identifier via IFLA attribute").
Note that enum mctp_phys_binding is not currently uapi, but perhaps it
should be?
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241213112551.33557-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "gl->tot_len" variable is controlled by the user. It comes from
process_responses(). On 32bit systems, the "gl->tot_len +
sizeof(struct cpl_pass_accept_req) + sizeof(struct rss_header)" addition
could have an integer wrapping bug. Use size_add() to prevent this.
Fixes: a089439478 ("crypto: chtls - Register chtls with net tls")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c6bfb23c-2db2-4e1b-b8ab-ba3925c82ef5@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When userspace is adding data to an RPC call for transmission, it must pass
MSG_MORE to sendmsg() if it intends to add more data in future calls to
sendmsg(). Calling sendmsg() without MSG_MORE being asserted closes the
transmission phase of the call (assuming sendmsg() adds all the data
presented) and further attempts to add more data should be rejected.
However, this is no longer the case. The change of call state that was
previously the guard got bumped over to the I/O thread, which leaves a
window for a repeat sendmsg() to insert more data. This previously went
unnoticed, but the more recent patch that changed the structures behind the
Tx queue added a warning:
WARNING: CPU: 3 PID: 6639 at net/rxrpc/sendmsg.c:296 rxrpc_send_data+0x3f2/0x860
and rejected the additional data, returning error EPROTO.
Fix this by adding a guard flag to the call, setting the flag when we queue
the final packet and then rejecting further attempts to add data with
EPROTO.
Fixes: 2d689424b6 ("rxrpc: Move call state changes from sendmsg to I/O thread")
Reported-by: syzbot+ff11be94dfcd7a5af8da@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6757fb68.050a0220.2477f.005f.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: syzbot+ff11be94dfcd7a5af8da@syzkaller.appspotmail.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/2870480.1734037462@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use spin_lock_irq(), not spin_lock_bh() to take the lock when accessing the
->attend_link() to stop a delay in the I/O thread due to an interrupt being
taken in the app thread whilst that holds the lock and vice versa.
Fixes: a2ea9a9072 ("rxrpc: Use irq-disabling spinlocks between app and I/O thread")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/2870146.1734037095@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose an "unblock after N reports" OA property, to allow userspace threads
to be woken up less frequently.
Co-developed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212224903.1853862-1-ashutosh.dixit@intel.com
Jakub Kicinski says:
====================
netdev: fix repeated netlink messages in queue dumps
Fix dump continuation for queues and queue stats in the netdev family.
Because we used post-increment when saving id of dumped queue next
skb would re-dump the already dumped queue.
====================
Link: https://patch.msgid.link/20241213152244.3080955-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test already catches a netlink bug fixed by this series,
but only when running on HW with many queues. Make sure the
netdevsim instance created has a lot of queues, and constrain
the size of the recv_buffer used by netlink.
While at it test both rx and tx queues.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
recv_size parameter allows constraining the buffer size for dumps.
It's useful in testing kernel handling of dump continuation,
IOW testing dumps which span multiple skbs.
Let the tests set this parameter when initializing the YNL family.
Keep the normal default, we don't want tests to unintentionally
behave very differently than normal code.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 103 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 103 != 100 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 102 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 102 != 100 missing queue keys
not ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:4 fail:1 xfail:0 xpass:0 skip:0 error:0
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: ab63a2387c ("netdev: add per-queue statistics")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 102 != 100
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 101 != 100
not ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
not ok 1 selftests: drivers/net: queues.py # exit=1
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 6b6171db7f ("netdev-genl: Add netlink framework functions for queue")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove "snps,max-mtu" property which is both unused in the kernel and
undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
In the previous patch we've updated AT_EMPTY_PATH execs to use the dentry
filename. Test for this and just to be sure keeps working with symlinks,
which was a concern in [1], I've added a test for that as well.
The test itself is a bit ugly, because the existing check_execveat_fail()
helpers use a hardcoded envp and argv, and we want to "pass" things via the
environment to test various argument values, but it seemed cleaner than
passing one in everywhere in all the existing tests.
Output looks like:
ok 51 Check success of execveat(6, 'home/tycho/packages/...yyyyyyyyyyyyyyyyyyyy', 0)...
# Check execveat(AT_EMPTY_PATH)'s comm is execveat
ok 52 Check success of execveat(9, '', 4096)...
# Check execveat(AT_EMPTY_PATH)'s comm is execveat
ok 53 Check success of execveat(11, '', 4096)...
# Check execveat(AT_EMPTY_PATH)'s comm is execveat
[ 25.579272] process 'execveat' launched '/dev/fd/9' with NULL argv: empty string added
ok 54 Check success of execveat(9, '', 4096)...
Link: https://lore.kernel.org/all/20240925.152228-private.conflict.frozen.trios-TdUGhuI5Sb4v@cyphar.com/ [1]
Signed-off-by: Tycho Andersen <tandersen@netflix.com>
Link: https://lore.kernel.org/r/20241030203732.248767-2-tycho@tycho.pizza
Signed-off-by: Kees Cook <kees@kernel.org>
Add gpio0 controller node and correct DMA handshake ID for SPI
tx and rx channels.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Zbigniew mentioned at Linux Plumber's that systemd is interested in
switching to execveat() for service execution, but can't, because the
contents of /proc/pid/comm are the file descriptor which was used,
instead of the path to the binary[1]. This makes the output of tools like
top and ps useless, especially in a world where most fds are opened
CLOEXEC so the number is truly meaningless.
When the filename passed in is empty (e.g. with AT_EMPTY_PATH), use the
dentry's filename for "comm" instead of using the useless numeral from
the synthetic fdpath construction. This way the actual exec machinery
is unchanged, but cosmetically the comm looks reasonable to admins
investigating things.
Instead of adding TASK_COMM_LEN more bytes to bprm, use one of the unused
flag bits to indicate that we need to set "comm" from the dentry.
Suggested-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Suggested-by: Tycho Andersen <tandersen@netflix.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://github.com/uapi-group/kernel-features#set-comm-field-before-exec [1]
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Tested-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Kees Cook <kees@kernel.org>
Using strscpy() meant that the final character in task->comm may be
non-NUL for a moment before the "string too long" truncation happens.
Instead of adding a new use of the ambiguous strncpy(), we'd want to
use memtostr_pad() which enforces being able to check at compile time
that sizes are sensible, but this requires being able to see string
buffer lengths. Instead of trying to inline __set_task_comm() (which
needs to call trace and perf functions), just open-code it. But to
make sure we're always safe, add compile-time checking like we already
do for get_task_comm().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Add VGIC maintenance interrupt and interrupt-parent property for
interrupt controller, required to run Linux in virtualized environment.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Tariq Toukan says:
====================
mlx5-next 2024-12-16
The following pull-request contains mlx5 IFC updates.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add device cap abs_native_port_num
net/mlx5: qos: Add ifc support for cross-esw scheduling
net/mlx5: Add support for new scheduling elements
net/mlx5: Add ConnectX-8 device to ifc
net/mlx5: ifc: Reorganize mlx5_ifc_flow_table_context_bits
====================
Link: https://patch.msgid.link/20241216124028.973763-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the proper API instead of open coding it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
GCC performs value range tracking for variables as a way to provide better
diagnostics. One place this is regularly seen is with warnings associated
with bounds-checking, e.g. -Wstringop-overflow, -Wstringop-overread,
-Warray-bounds, etc. In order to keep the signal-to-noise ratio high,
warnings aren't emitted when a value range spans the entire value range
representable by a given variable. For example:
unsigned int len;
char dst[8];
...
memcpy(dst, src, len);
If len's value is unknown, it has the full "unsigned int" range of [0,
UINT_MAX], and GCC's compile-time bounds checks against memcpy() will
be ignored. However, when a code path has been able to narrow the range:
if (len > 16)
return;
memcpy(dst, src, len);
Then the range will be updated for the execution path. Above, len is
now [0, 16] when reading memcpy(), so depending on other optimizations,
we might see a -Wstringop-overflow warning like:
error: '__builtin_memcpy' writing between 9 and 16 bytes into region of size 8 [-Werror=stringop-overflow]
When building with CONFIG_FORTIFY_SOURCE, the fortified run-time bounds
checking can appear to narrow value ranges of lengths for memcpy(),
depending on how the compiler constructs the execution paths during
optimization passes, due to the checks against the field sizes. For
example:
if (p_size_field != SIZE_MAX &&
p_size != p_size_field && p_size_field < size)
As intentionally designed, these checks only affect the kernel warnings
emitted at run-time and do not block the potentially overflowing memcpy(),
so GCC thinks it needs to produce a warning about the resulting value
range that might be reaching the memcpy().
We have seen this manifest a few times now, with the most recent being
with cpumasks:
In function ‘bitmap_copy’,
inlined from ‘cpumask_copy’ at ./include/linux/cpumask.h:839:2,
inlined from ‘__padata_set_cpumasks’ at kernel/padata.c:730:2:
./include/linux/fortify-string.h:114:33: error: ‘__builtin_memcpy’ reading between 257 and 536870904 bytes from a region of size 256 [-Werror=stringop-overread]
114 | #define __underlying_memcpy __builtin_memcpy
| ^
./include/linux/fortify-string.h:633:9: note: in expansion of macro ‘__underlying_memcpy’
633 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
./include/linux/fortify-string.h:678:26: note: in expansion of macro ‘__fortify_memcpy_chk’
678 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/bitmap.h:259:17: note: in expansion of macro ‘memcpy’
259 | memcpy(dst, src, len);
| ^~~~~~
kernel/padata.c: In function ‘__padata_set_cpumasks’:
kernel/padata.c:713:48: note: source object ‘pcpumask’ of size [0, 256]
713 | cpumask_var_t pcpumask,
| ~~~~~~~~~~~~~~^~~~~~~~
This warning is _not_ emitted when CONFIG_FORTIFY_SOURCE is disabled,
and with the recent -fdiagnostics-details we can confirm the origin of
the warning is due to FORTIFY's bounds checking:
../include/linux/bitmap.h:259:17: note: in expansion of macro 'memcpy'
259 | memcpy(dst, src, len);
| ^~~~~~
'__padata_set_cpumasks': events 1-2
../include/linux/fortify-string.h:613:36:
612 | if (p_size_field != SIZE_MAX &&
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
613 | p_size != p_size_field && p_size_field < size)
| ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
| |
| (1) when the condition is evaluated to false
| (2) when the condition is evaluated to true
'__padata_set_cpumasks': event 3
114 | #define __underlying_memcpy __builtin_memcpy
| ^
| |
| (3) out of array bounds here
Note that the cpumask warning started appearing since bitmap functions
were recently marked __always_inline in commit ed8cd2b3bd ("bitmap:
Switch from inline to __always_inline"), which allowed GCC to gain
visibility into the variables as they passed through the FORTIFY
implementation.
In order to silence these false positives but keep otherwise deterministic
compile-time warnings intact, hide the length variable from GCC with
OPTIMIZE_HIDE_VAR() before calling the builtin memcpy.
Additionally add a comment about why all the macro args have copies with
const storage.
Reported-by: "Thomas Weißschuh" <linux@weissschuh.net>
Closes: https://lore.kernel.org/all/db7190c8-d17f-4a0d-bc2f-5903c79f36c2@t-8ch.de/
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Closes: https://lore.kernel.org/all/20241112124127.1666300-1-nilay@linux.ibm.com/
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Since readl() returns a u32, the local variable reg can also have the
data type u32. Furthermore, divf and divq are derived from reg and can
also be a u32.
Since do_div() casts the divisor to u32 anyway, changing the data type
of divq to u32 also removes the following Coccinelle/coccicheck warning
reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead
Compile-tested only.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
