Currently, during mac80211 allocate and register single device is
considered for the registration. But, in future, during multi device
group abstraction is introduced, all the devices has to be combined
together as a single abstraction and then hardware should be allocated.
All the devices in the group should be combined together only if it
supports inter device mlo capability. The decision of whether to combine
the devices or not can be based on the mlo capability flag in
ath12k_hw_group.
By default, mlo_capable flag in the group would be set as false. During
QMI PHY capability exchange, only when we have more than one chip in the
group or if one chip, then that chip supports inter MLO, then mlo_capable
flag in the group will be enabled.
Add changes to introduce mlo_capable flag for device group and refactor
ath12k_mac_hw_allocate() api based on device group (ag) rather than
device (ab).
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-8-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
QMI host capability has the information regarding MLO parameters such as
device_id, MLO capability, group id and the information of each devices
involved in the group and sent immediately on QMI server arrive event.
Currently, only one device is involved in the group and hence, single
device information is sent as part of MLO capability of host.
But, in future when multi device group abstraction is introduced, host
should send all the device information involved in the group as part
of QMI MLO host capability rather than single device. Hence, sending
QMI host capability immediately on server arrive of a device might not
be ideal for multi device group abstraction as the details of other
devices in the group would not be available.
Hence, once QMI server arrive event is received, request for QMI PHY
capabilities of device, and defer the host capability send for that device.
After QMI PHY capability is received for all the devices in the group
trigger the host capability event for the deferred devices in the group.
Hence, add changes to defer the QMI host capability event until the device
group is ready and then resume the QMI exchange for all the device with
host capabilities.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-7-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, hardware abstractions (ah) of different radio bands are tightly
coupled to a single device (ab). But, with hardware device group abstraction
(ag), multiple radios across different devices in a group can form different
combinations of hardware abstractions (ah) within the group. Hence, the mapping
between ah to ab can be removed and instead it can be mapped with struct
ath12k_hw_group (ag).
Current mapping between struct ath12k_hw (ah), struct ath12k_base (ab) and struct
ath12k_hw_group (ag):
+------------------------------------------------+
| +-------------------------------------+ |
| | +---------------+ +---------------+ | |
| | |ath12k_hw (ah) | |ath12k_hw (ah) | | |
| | +---------------+ +---------------+ | |
| | | |
| | +-----------+ | +-----------+ | |
| | | ar (2GHz) | | | ar (5GHz) | | |
| | +-----------+ | +-----------+ | |
| | Dual band device-1 (ab) | |
| +-------------------------------------+ |
| ath12k_hw_group (ag) based on group id |
+------------------------------------------------+
After hardware device group abstraction moving ah array out of ab to ag:
+----------------------------------------------+
| +---------------+ +---------------+ |
| |ath12k_hw (ah) | |ath12k_hw (ah) | |
| +---------------+ +---------------+ |
| +-------------------------------------+ |
| | +-----------+ +-----------+ | |
| | | ar (2GHz) | | ar (5GHz) | | |
| | +-----------+ +-----------+ | |
| | Dual band device-1 (ab) | |
| +-------------------------------------+ |
| ath12k_hw_group (ag) based on group id |
+----------------------------------------------+
This decoupling of struct ath12k_hw (ah) from struct ath12k_base (ab) and
mapping it to struct ath12k_hw_group (ag) will help in forming different
combinations of multi-link devices.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-6-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, mac allocate/register and core_pdev_create are initiated immediately
when QMI firmware ready event is received for a particular device. With
hardware device group abstraction, QMI firmware ready event can be received
simultaneously for different devices in the group and so, it should not be
registered immediately rather it has to be deferred until all devices in the
group has received QMI firmware ready.
To handle this, refactor the code of core start to have registering within
ath12k_core_hw_group_start() and unregistering in ath12k_core_hw_group_stop().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Co-developed-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-5-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, single device is probed, and once firmware is ready, the device
is registered to mac80211. For Multi-Link Operation, different bands of
different devices or same device are part of a single wiphy and for
this, hardware device group abstraction is needed.
Hardware device group abstraction - when there are multiple devices (with
single radio or dual radio) that are connected by any means of interface
for communicating between them, then these devices can be combined
together as a single group using a group id to form a group abstraction
and register to mac80211.
The grouping information of multiple devices would be based on device tree
during device probe (will be implemented in future patches). If no such
information is available, then a single device will be part of group abstraction
and registered to mac80211, else multiple devices advertised in device tree are
combined and then registered to mac80211.
For device group abstraction, a base structure ath12k_hw_group (ag) and the
helpers are implemented. These helpers are used during device probe and mapping
the group to the devices involved.
An illustration of how multiple devices might be combined together in
future based on group id:
+------------------------------------------------------------------------+
| +-------------------------------------+ +-------------------+ |
| | +-----------+ | | +-----------+ | | +-----------+ | |
| | | ar (2GHz) | | | | ar (5GHz) | | | | ar (6GHz) | | |
| | +-----------+ | | +-----------+ | | +-----------+ | |
| | ath12k_base (ab) | | ath12k_base (ab) | |
| | (Dual band device) | | | |
| +-------------------------------------+ +-------------------+ |
| ath12k_hw_group (ag) based on group id |
+------------------------------------------------------------------------+
In the above representation, two devices are combined into single group
based on group id.
Add base code changes where single device would be part of a group with an
invalid group id forming an group abstraction. Multi device grouping will
be introduced in future.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Co-developed-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-4-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
At present, the mlo_capable_flags in ath12k_base is used to indicate whether
the chip supports inter (QCN9274) or intra (WCN7850) chip MLO. However, it’s
possible that the chip supports neither, especially with older firmware
versions. Additionally, if intra chip MLO is not supported, inter chip MLO will
also be non-functional. Therefore, having two separate flags for this is
unnecessary.
Therefore, rename this flag to single_chip_mlo_supp. At the same time convert
it into a bool data type. Also, get rid of the enums defined earlier.
For the QCN9274 family of chipsets, this will be set only when firmware
advertises the support during the QMI exchange.
For the WCN7850 family of chipsets, since the event is not supported,
assumption is made that single chip MLO is supported.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-3-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
When hardware device group abstraction is introduced, a group abstraction is
registered to mac80211 rather than a particular single device. So we cannot
set the device registered when the QMI firmware ready event is received, only
after all the devices in group have received the event. To do that set and
unset ATH12K_FLAG_REGISTERED flag inside ath12k_mac_register() and
ath12k_mac_unregister() respectively.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-2-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
When adding a local TT twice within the same OGM interval (e.g. happens
when flag get updated), the flags of the first TT change entry is updated
with the second one and both change events is added to the change list.
This leads to having the same ADD change entry twice. Similarly, a
DEL+DEL scenario is also creating twice the same event.
Deduplicate ADD+ADD or DEL+DEL scenarios to reduce the TT change events
that need to be sent in both OGM and TT response.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Co-developed-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The tt.local_changes atomic is either written with tt.changes_list_lock
or close to it (see batadv_tt_local_event()). Thus the performance gain
using an atomic was limited (or because of atomic_read() impact even
negative). Using atomic also comes with the need to be wary of potential
negative tt.local_changes value.
Simplify the tt.local_changes usage by removing the atomic property and
modifying it only with tt.changes_list_lock held.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The commit 5f60d5f6bb ("move asm/unaligned.h to linux/unaligned.h")
changed the include without adjusting the order (to match the rest of the
file).
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This version will contain all the (major or even only minor) changes for
Linux 6.14.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
When TT changes list is too big to fit in packet due to MTU size, an
empty OGM is sent expected other node to send TT request to get the
changes. The issue is that tt.last_changeset was not built thus the
originator was responding with previous changes to those TT requests
(see batadv_send_my_tt_response). Also the changes list was never
cleaned up effectively never ending growing from this point onwards,
repeatedly sending the same TT response changes over and over, and
creating a new empty OGM every OGM interval expecting for the local
changes to be purged.
When there is more TT changes that can fit in packet, drop all changes,
send empty OGM and wait for TT request so we can respond with a full
table instead.
Fixes: e1bf0c1409 ("batman-adv: tvlv - convert tt data sent within OGMs")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Acked-by: Antonio Quartulli <Antonio@mandelbit.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The number of entries filled by batadv_tt_tvlv_generate() can be less
than initially expected in batadv_tt_prepare_tvlv_{global,local}_data()
(changes can be removed by batadv_tt_local_event() in ADD+DEL sequence
in the meantime as the lock held during the whole tvlv global/local data
generation).
Thus tvlv_len could be bigger than the actual TT entry size that need
to be sent so full table TT_RESPONSE could hold invalid TT entries such
as below.
* 00:00:00:00:00:00 -1 [....] ( 0) 88:12:4e:ad:7e:ba (179) (0x45845380)
* 00:00:00:00:78:79 4092 [.W..] ( 0) 88:12:4e:ad:7e:3c (145) (0x8ebadb8b)
Remove the extra allocated space to avoid sending uninitialized entries
for full table TT_RESPONSE in both batadv_send_other_tt_response() and
batadv_send_my_tt_response().
Fixes: 7ea7b4a142 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The number of TT changes can be less than initially expected in
batadv_tt_tvlv_container_update() (changes can be removed by
batadv_tt_local_event() in ADD+DEL sequence between reading
tt_diff_entries_num and actually iterating the change list under lock).
Thus tt_diff_len could be bigger than the actual changes size that need
to be sent. Because batadv_send_my_tt_response sends the whole
packet, uninitialized data can be interpreted as TT changes on other
nodes leading to weird TT global entries on those nodes such as:
* 00:00:00:00:00:00 -1 [....] ( 0) 88:12:4e:ad:7e:ba (179) (0x45845380)
* 00:00:00:00:78:79 4092 [.W..] ( 0) 88:12:4e:ad:7e:3c (145) (0x8ebadb8b)
All of the above also applies to OGM tvlv container buffer's tvlv_len.
Remove the extra allocated space to avoid sending uninitialized TT
changes in batadv_send_my_tt_response() and batadv_v_ogm_send_softif().
Fixes: e1bf0c1409 ("batman-adv: tvlv - convert tt data sent within OGMs")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Stanislav Fomichev says:
====================
ethtool: generate uapi header from the spec
We keep expanding ethtool netlink api surface and this leads to
constantly playing catchup on the ynl spec side. There are a couple
of things that prevent us from fully converting to generating
the header from the spec (stats and cable tests), but we can
generate 95% of the header which is still better than maintaining
c header and spec separately. The series adds a couple of missing
features on the ynl-gen-c side and separates the parts
that we can generate into new ethtool_netlink_generated.h.
====================
Link: https://patch.msgid.link/20241204155549.641348-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cleanup the header manually to make it easier to review the changes that ynl
generator brings in. No functional changes.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204155549.641348-8-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reshuffle definitions that are gonna be generated into
ethtool_netlink_generated.h and match ynl spec order.
This should make it easier to compare the output of the ynl-gen-c
to the existing uapi header. No functional changes.
Things that are still remaining to be manually defined:
- ETHTOOL_FLAG_ALL - probably no good way to add to spec?
- some of the cable test bits (not sure whether it's possible to move to
spec)
- some of the stats definitions (no way currently to move to spec)
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204155549.641348-7-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Essentially reverse the order of headers for userspace generated files.
Before (make -C tools/net/ynl/; cat tools/net/ynl/ethtool-user.h):
#include <linux/ethtool_netlink_generated.h>
#include <linux/ethtool.h>
#include <linux/ethtool.h>
#include <linux/ethtool.h>
After:
#include <linux/ethtool.h>
#include <linux/ethtool_netlink_generated.h>
While at it, make sure we track which headers we've already included
and include the headers only once.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204155549.641348-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- __ETHTOOL_UDP_TUNNEL_TYPE_CNT and render max
- skip rendering stringset (empty enum)
- skip rendering c33-pse-ext-state (defined in ethtool.h)
- rename header flags to ethtool-flag-
- add attr-cnt-name to each attribute to use XXX_CNT instead of XXX_MAX
- add unspec 0 entry to each attribute
- carry some doc entries from the existing header
- tcp-header-split
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204155549.641348-5-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The intent is to generate ethtool uapi headers. For now, some of the
things are hard-coded:
- <FAMILY>_MSG_{USER,KERNEL}_MAX
- the split between USER and KERNEL messages
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204155549.641348-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is similar to existing attr-cnt-name in the attributes
to allow changing the name of the 'count' enum entry.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204155549.641348-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set the default workload type to bootup type on smu v13.0.7.
This is because of the constraint on smu v13.0.7.
Gfx activity has an even higher set point on 3D fullscreen
mode than the one on bootup mode. This causes the 3D fullscreen
mode's performance is worse than the bootup mode's performance
for the lightweighted/medium workload. For the high workload,
the performance is the same between 3D fullscreen mode and bootup
mode.
v2: set the default workload in ASIC specific file
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Refactor such that individual SMU IP versions can choose the startup
power profile mode. If no preference, then use the generic default power
profile selection logic.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
base.sched may not be set for each instance and should not
be used for cases such as non-IB tests.
Fixes: 2320c9e6a7 ("drm/sched: memset() 'job' in drm_sched_job_init()")
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When starting the mpv player, Radeon R9 users are observing
the below error in dmesg.
[drm:amdgpu_uvd_cs_pass2 [amdgpu]]
*ERROR* msg/fb buffer ff00f7c000-ff00f7e000 out of 256MB segment!
The patch tries to set the TTM_PL_FLAG_CONTIGUOUS for both user
flag(AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS) set and not set cases.
v2: Make the TTM_PL_FLAG_CONTIGUOUS mandatory for user BO's.
v3: revert back to v1, but fix the check instead (chk).
Closes:https://gitlab.freedesktop.org/drm/amd/-/issues/3599
Closes:https://gitlab.freedesktop.org/drm/amd/-/issues/3501
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.10+
Use second jump table in sriov for live migration or mulitple VF
support so different VF can load different version of MEC as long
as they support sjt
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 274e3f4596.
Additional review comments to address. Will resubmit.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align the page tracking maximum message size with the device's
capability instead of relying on PAGE_SIZE.
This adjustment resolves a mismatch on systems where PAGE_SIZE is 64K,
but the firmware only supports a maximum message size of 4K.
Now that we rely on the device's capability for max_message_size, we
must account for potential future increases in its value.
Key considerations include:
- Supporting message sizes that exceed a single system page (e.g., an 8K
message on a 4K system).
- Ensuring the RQ size is adjusted to accommodate at least 4
WQEs/messages, in line with the device specification.
The above has been addressed as part of the patch.
Fixes: 79c3cf2799 ("vfio/mlx5: Init QP based resources for dirty tracking")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Yingshun Cui <yicui@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20241205122654.235619-1-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Before commit [1], the value of a variable TPROGS_USER_CFLAGS was
passed to libbpf make command as a part of EXTRA_CFLAGS.
This commit makes sure that the value of TPROGS_USER_CFLAGS is still
passed to libbpf make command, in order to maintain backwards build
scripts compatibility.
[1] commit 5a6ea7022f ("samples/bpf: Remove unnecessary -I flags from libbpf EXTRA_CFLAGS")
Fixes: 5a6ea7022f ("samples/bpf: Remove unnecessary -I flags from libbpf EXTRA_CFLAGS")
Suggested-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/20241204173416.142240-1-eddyz87@gmail.com
Dump TD configuration on boot. Attributes and TD_CTLS define TD
behavior. This information is useful for tracking down bugs.
The output ends up looking like this in practice:
[ 0.000000] tdx: Guest detected
[ 0.000000] tdx: Attributes: SEPT_VE_DISABLE
[ 0.000000] tdx: TD_CTLS: PENDING_VE_DISABLE ENUM_TOPOLOGY VIRT_CPUID2 REDUCE_VE
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/all/20241202072458.447455-1-kirill.shutemov%40linux.intel.com
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth: bnxt_en: support header page pool in queue API
- eth: ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth: mlxsw: use correct key block on Spectrum-4
- eth: mlx5: fix memory leak in mlx5hws_definer_calc_layout
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=nkPk
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
- Fix trace histogram sort function cmp_entries_dup()
The sort function cmp_entries_dup() returns either 1 or 0, and not
-1 if parameter "a" is less than "b" by memcmp().
- Fix archs that call trace_hardirqs_off() without RCU watching
Both x86 and arm64 no longer call any tracepoints with RCU not
watching. It was assumed that it was safe to get rid of
trace_*_rcuidle() version of the tracepoint calls. This was needed
to get rid of the SRCU protection and be able to implement features
like faultable traceponits and add rust tracepoints.
Unfortunately, there were a few architectures that still relied on
that logic. There's only one file that has tracepoints that are
called without RCU watching. Add macro logic around the tracepoints
for architectures that do not have CONFIG_ARCH_WANTS_NO_INSTR defined
will check if the code is in the idle path (the only place RCU isn't
watching), and enable RCU around calling the tracepoint, but only
do it if the tracepoint is enabled.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ1G5gxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnsXAQCzFHRbTrrmSmvKRHdWxUxhlYjKALHA
v6DCySLgdNtv0QD8D5hHeGzhVXUhECG0mUcduZ7wvaym+yAQWU5V9gUcRwU=
=E8i1
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix trace histogram sort function cmp_entries_dup()
The sort function cmp_entries_dup() returns either 1 or 0, and not -1
if parameter "a" is less than "b" by memcmp().
- Fix archs that call trace_hardirqs_off() without RCU watching
Both x86 and arm64 no longer call any tracepoints with RCU not
watching. It was assumed that it was safe to get rid of
trace_*_rcuidle() version of the tracepoint calls. This was needed to
get rid of the SRCU protection and be able to implement features like
faultable traceponits and add rust tracepoints.
Unfortunately, there were a few architectures that still relied on
that logic. There's only one file that has tracepoints that are
called without RCU watching. Add macro logic around the tracepoints
for architectures that do not have CONFIG_ARCH_WANTS_NO_INSTR defined
will check if the code is in the idle path (the only place RCU isn't
watching), and enable RCU around calling the tracepoint, but only do
it if the tracepoint is enabled.
* tag 'trace-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix archs that still call tracepoints without RCU watching
tracing: Fix cmp_entries_dup() to respect sort() comparison rules
-----BEGIN PGP SIGNATURE-----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=9aQY
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix in suspend/resume for i2c-hid (Kenny Levinsen)
- fix wacom driver assuming a name can not be null (WangYuli)
- a couple of constify changes/fixes (Thomas Weißschuh)
- a couple of selftests/hid fixes (Maximilian Heyne & Benjamin
Tissoires)
* tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: fix kfunc inclusions with newer bpftool
HID: bpf: drop unneeded casts discarding const
HID: bpf: constify hid_ops
selftests: hid: fix typo and exit code
HID: wacom: fix when get product name maybe null pointer
HID: i2c-hid: Revert to using power commands to wake on resume
Currently gcs_set() doesn't initialize the temporary 'user_gcs'
variable, and a SETREGSET call with a length of 0, 8, or 16 will leave
some portion of this uninitialized. Consequently some arbitrary
uninitialized values may be written back to the relevant fields in task
struct, potentially leaking up to 192 bits of memory from the kernel
stack. The read is limited to a specific slot on the stack, and the
issue does not provide a write mechanism.
As gcs_set() rejects cases where user_gcs::features_enabled has bits set
other than PR_SHADOW_STACK_SUPPORTED_STATUS_MASK, a SETREGSET call with
a length of zero will randomly succeed or fail depending on the value of
the uninitialized value, it isn't possible to leak the full 192 bits.
With a length of 8 or 16, user_gcs::features_enabled can be initialized
to an accepted value, making it practical to leak 128 or 64 bits.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length or partial write, the
existing contents of the fields which are not written to will be
retained.
To ensure that the extraction and insertion of fields is consistent
across the GETREGSET and SETREGSET calls, new task_gcs_to_user() and
task_gcs_from_user() helpers are added, matching the style of
pac_address_keys_to_user() and pac_address_keys_from_user().
Before this patch:
| # ./gcs-test
| Attempting to write NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x0000000000000000,
| .gcspr_el0 = 0x900d900d900d900d,
| }
| SETREGSET(nt=0x410, len=24) wrote 24 bytes
|
| Attempting to read NT_ARM_GCS::user_gcs
| GETREGSET(nt=0x410, len=24) read 24 bytes
| Read NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x0000000000000000,
| .gcspr_el0 = 0x900d900d900d900d,
| }
|
| Attempting partial write NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x1de7ec7edbadc0de,
| .gcspr_el0 = 0x1de7ec7edbadc0de,
| }
| SETREGSET(nt=0x410, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_GCS::user_gcs
| GETREGSET(nt=0x410, len=24) read 24 bytes
| Read NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x000000000093e780,
| .gcspr_el0 = 0xffff800083a63d50,
| }
After this patch:
| # ./gcs-test
| Attempting to write NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x0000000000000000,
| .gcspr_el0 = 0x900d900d900d900d,
| }
| SETREGSET(nt=0x410, len=24) wrote 24 bytes
|
| Attempting to read NT_ARM_GCS::user_gcs
| GETREGSET(nt=0x410, len=24) read 24 bytes
| Read NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x0000000000000000,
| .gcspr_el0 = 0x900d900d900d900d,
| }
|
| Attempting partial write NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x1de7ec7edbadc0de,
| .gcspr_el0 = 0x1de7ec7edbadc0de,
| }
| SETREGSET(nt=0x410, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_GCS::user_gcs
| GETREGSET(nt=0x410, len=24) read 24 bytes
| Read NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x0000000000000000,
| .gcspr_el0 = 0x900d900d900d900d,
| }
Fixes: 7ec3b57cb2 ("arm64/ptrace: Expose GCS via ptrace and core files")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241205121655.1824269-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently poe_set() doesn't initialize the temporary 'ctrl' variable,
and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently an arbitrary value will be written back to
target->thread.por_el0, potentially leaking up to 64 bits of memory from
the kernel stack. The read is limited to a specific slot on the stack,
and the issue does not provide a write mechanism.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
contents of POR_EL1 will be retained.
Before this patch:
| # ./poe-test
| Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d
| SETREGSET(nt=0x40f, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
|
| Attempting to write NT_ARM_POE (zero length)
| SETREGSET(nt=0x40f, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0xffff8000839c3d50
After this patch:
| # ./poe-test
| Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d
| SETREGSET(nt=0x40f, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
|
| Attempting to write NT_ARM_POE (zero length)
| SETREGSET(nt=0x40f, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
Fixes: 1751981992 ("arm64/ptrace: add support for FEAT_POE")
Cc: <stable@vger.kernel.org> # 6.12.x
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241205121655.1824269-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable,
and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently an arbitrary value will be written back to
target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from
the kernel stack. The read is limited to a specific slot on the stack,
and the issue does not provide a write mechanism.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
contents of FPMR will be retained.
Before this patch:
| # ./fpmr-test
| Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d
| SETREGSET(nt=0x40e, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
|
| Attempting to write NT_ARM_FPMR (zero length)
| SETREGSET(nt=0x40e, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0xffff800083963d50
After this patch:
| # ./fpmr-test
| Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d
| SETREGSET(nt=0x40e, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
|
| Attempting to write NT_ARM_FPMR (zero length)
| SETREGSET(nt=0x40e, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
Fixes: 4035c22ef7 ("arm64/ptrace: Expose FPMR via ptrace")
Cc: <stable@vger.kernel.org> # 6.9.x
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241205121655.1824269-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmdO8FgACgkQ+iyteGJfRsqdmgCgqPArbZweV/LTPcZXx89MaIEd
hG8AoLrh8n5L08d6r5v1sII5To4KoZI7
=IX0/
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl'
variable, and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently tagged_addr_ctrl_set() will consume an
arbitrary value, potentially leaking up to 64 bits of memory from the
kernel stack. The read is limited to a specific slot on the stack, and
the issue does not provide a write mechanism.
As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and
rejects other values, a partial SETREGSET attempt will randomly succeed
or fail depending on the value of the uninitialized value, and the
exposure is significantly limited.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
value of the tagged address ctrl will be retained.
The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the
user_aarch64_view used by a native AArch64 task to manipulate another
native AArch64 task. As get_tagged_addr_ctrl() only returns an error
value when called for a compat task, tagged_addr_ctrl_get() and
tagged_addr_ctrl_set() should never observe an error value from
get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that
such an error would be unexpected, and error handlnig is not missing in
either case.
Fixes: 2200aa7154 ("arm64: mte: ptrace: Add NT_ARM_TAGGED_ADDR_CTRL regset")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241205121655.1824269-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
PCI region request functions have a @name parameter (sometimes called
"res_name"). It is used in a log message to inform drivers about request
collisions, e.g., when another driver has requested that region already.
This message is only useful when it contains the actual owner of the
region, i.e., which driver requested it. So far, a great many drivers
misuse the @name parameter and just pass pci_name(), which doesn't result
in useful debug information.
Rename "res_name" to "name".
Detail @name's purpose in the docstrings.
Link: https://lore.kernel.org/r/20241203100023.31152-2-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
[bhelgaas: tweak comment wording to include "driver"]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
On the Raspberry Pi 5, performance counters are not being cleared
when `v3d_perfmon_start()` is called, even though we write to the
CLR register. As a result, their values accumulate until they
overflow.
The expected behavior is for performance counters to reset to zero
at the start of a job. When the job finishes and the perfmon is
stopped, the counters should accurately reflect the values for that
specific job.
To ensure this behavior, the performance counters are now enabled
before being cleared. This allows the CLR register to function as
intended, zeroing the counter values when the job begins.
Fixes: 26a4dc29b7 ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204122831.17015-1-mcanal@igalia.com
Since system_supports_gcs() ends up referring to cpucap_is_possible(),
teach the latter about GCS for consistency with similar features.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/416c7369fcdce4ebb2a8f12daae234507be27e38.1733406275.git.robin.murphy@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
- Target fix using incorrect zero buffer (Nilay)
- Device specifc deallocate quirk fixes (Christoph, Keith)
- Fabrics fix for handling max command target bugs (Maurizio)
- Cocci fix usage for kzalloc (Yu-Chen)
- DMA size fix for host memory buffer feature (Christoph)
- Fabrics queue cleanup fixes (Chunguang)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE3Fbyvv+648XNRdHTPe3zGtjzRgkFAmdR3fkACgkQPe3zGtjz
RgkAbQ/+IblDuMKO6pzZkzMVECwjtJz8E195weCBVWsc5FE80AXX9lz3I5w0N1I5
5etZlXoQ9YDyPWIzlkg2WKkXtGI4vKUUiJ02dXbre7xBMbRA1Qb4C9hH2KmvnxA4
Qb52717FSMDxzjQKz4e3cz34cS/RaDENypSvAu1SDGvJhKSNrkEjz/lVXy6eFWvI
DELL7yDOdl4H91G4vGlC7eKV0BI6rCAThyAnivkKS1P+UWy9tJja7UNKix2cuh6Y
PhEdSynH+JgfKO873j45qEPWaa/htjXSsa0gp6yEd2ZdO5lIeoDRbLYCX8gE6Vcs
yw4xbuQwexhnJi4LVeAR3fUNA2RdPy8zSjVM0gwpQCI161QEocl/KaWNmBcjcwLp
0dZGRftQoLGN+Ugmv7eTBBN3qb60nYwfCDxHrLv6ffQyai2++2b1PqLnsd+oHGOQ
vjmFxBSDbmXybbb5h47lJY+EU6Cr3HRKq136Ypmwx7t3d+1cLCzVPsal///5AuYq
/Srg1CENmAWEiM4LnuZYqs45BGu+/HN4TWjbi1ddAcPmc+YpOz89hdHZ/TnS9Gjl
nVN8CHrCBuSnG9ZVyla+nFaqAr3A8YFWfDNp05AVFUsLW3hWrWrj2m0wmGegwoIE
JVgC+ebhQg6UWTAdq4gBnSwz8bbgj/YwRYbqqzfJTioOXbgkZBY=
=niio
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.13-2024-12-05' of git://git.infradead.org/nvme into block-6.13
Pull NVMe fixess from Keith:
"nvme fixes for Linux 6.13
- Target fix using incorrect zero buffer (Nilay)
- Device specifc deallocate quirk fixes (Christoph, Keith)
- Fabrics fix for handling max command target bugs (Maurizio)
- Cocci fix usage for kzalloc (Yu-Chen)
- DMA size fix for host memory buffer feature (Christoph)
- Fabrics queue cleanup fixes (Chunguang)"
* tag 'nvme-6.13-2024-12-05' of git://git.infradead.org/nvme:
nvme-tcp: simplify nvme_tcp_teardown_io_queues()
nvme-tcp: no need to quiesce admin_q in nvme_tcp_teardown_io_queues()
nvme-rdma: unquiesce admin_q before destroy it
nvme-tcp: fix the memleak while create new ctrl failed
nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary
nvmet: replace kmalloc + memset with kzalloc for data allocation
nvme-fabrics: handle zero MAXCMD without closing the connection
nvme-pci: remove two deallocate zeroes quirks
nvme: don't apply NVME_QUIRK_DEALLOCATE_ZEROES when DSM is not supported
nvmet: use kzalloc instead of ZERO_PAGE in nvme_execute_identify_ns_nvm()
A few small fixes for v6.13, all system specific - the biggest thing is
the fix for jack handling over suspend on some Intel laptops.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdR3IYACgkQJNaLcl1U
h9CaAAgAhU+wN7LEym7648q33gVEy/I335+ZHf0gLEMnAF1iNzoOx0Gy3cXBPHq3
sic1P37UmkIIWi6BTr19aBxQ9Z0Vk3WhUsk+elmg3vhR1lodBZ9m8lYlLyEGbCh/
Ur/AFSoewPbYGdJAVL7FclDiMXlnallF6xFWbh9O9Fw85hTh4WF07dRyws8j9tZQ
qMkoic95lLPZTCplt8vHVC9sTXWuVp1HNiUKZDLLQ044PRlehLH21W4HJJgk/Dtl
TO5U1zZpY3gB1QsxaR3+6vMDgPHHCUxvRkb4/hydHmKIqoFGuu0Ootipm9su1b/L
jOKeEX2Gk6416fHpTWPUvJQTlv9MAA==
=lnCs
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A few small fixes for v6.13, all system specific - the biggest thing is
the fix for jack handling over suspend on some Intel laptops.
Commit 4ce6e2db00 ("virtio-blk: Ensure no requests in virtqueues before
deleting vqs.") replaces queue quiesce with queue freeze in virtio-blk's
PM callbacks. And the motivation is to drain inflight IOs before suspending.
block layer's queue freeze looks very handy, but it is also easy to cause
deadlock, such as, any attempt to call into bio_queue_enter() may run into
deadlock if the queue is frozen in current context. There are all kinds
of ->suspend() called in suspend context, so keeping queue frozen in the
whole suspend context isn't one good idea. And Marek reported lockdep
warning[1] caused by virtio-blk's freeze queue in virtblk_freeze().
[1] https://lore.kernel.org/linux-block/ca16370e-d646-4eee-b9cc-87277c89c43c@samsung.com/
Given the motivation is to drain in-flight IOs, it can be done by calling
freeze & unfreeze, meantime restore to previous behavior by keeping queue
quiesced during suspend.
Cc: Yi Sun <yi.sun@unisoc.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: virtualization@lists.linux.dev
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20241112125821.1475793-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
