There apparently is no reason to require 3 queued buffers to call
streamon() for the RkISP1 as the driver operates with a scratch buffer
where frames can be directed to if there's no available buffer provided
by userspace.
Reduce the number of required buffers to 1 to allow applications to
operate with a single queued buffer.
Tested with libcamera, by operating with a single capture request. The
same request (and associated capture buffer) gets recycled once
completed. This of course causes a frame rate drop but doesn't hinder
operations.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241007124225.63463-1-jacopo.mondi@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This commit fixes an unused value issue detected by Coverity (CID
1519008). The error condition for the invalid MIPI CSI-2 is not properly
handled as the break statement would only exit the switch block and not
the entire loop. Fix this by breaking from the look immediately after
the switch block when an error occurs.
Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com>
Fixes: 7d4f126fde ("media: rkisp1: Make the internal CSI-2 receiver optional")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Link: https://lore.kernel.org/r/20241119072653.72260-1-dheeraj.linuxdev@gmail.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add delays to allow frequency stabilization before power measurement
to fix sporadic power conservation issues in live_rps_power test.
v2:
- Move delay to respective function (Badal)
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203061114.2790448-1-sk.anirban@intel.com
Commit e546fe1da9 ("block: Rework bio_split() return value") changed
bio_split() so that it can return errors.
Add error handling for it in btrfs_split_bio() and ultimately
btrfs_submit_chunk(). As the bio is not submitted, the bio counter must
be decremented to pair btrfs_bio_counter_inc_blocked().
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Before commit e820dbeb6a ("btrfs: convert btrfs_buffered_write() to
use folios"), function prepare_one_folio() will always wait for folio
writeback to finish before returning the folio.
However commit e820dbeb6a ("btrfs: convert btrfs_buffered_write() to
use folios") changed to use FGP_STABLE to do the writeback wait, but
FGP_STABLE is calling folio_wait_stable(), which only calls
folio_wait_writeback() if the address space has AS_STABLE_WRITES, which
is not set for btrfs inodes.
This means we will not wait for the folio writeback at all.
[CAUSE]
The cause is FGP_STABLE is not waiting for writeback unconditionally, but
only for address spaces with AS_STABLE_WRITES, normally such flag is set
when the super block has SB_I_STABLE_WRITES flag.
Such super block flag is set when the block device has hardware digest
support or has internal checksum requirement.
I'd argue btrfs should set such super block due to its default data
checksum behavior, but it is not set yet, so this means FGP_STABLE flag
will have no effect at all.
(For NODATASUM inodes, we can skip the waiting in theory but that should
be an optimization in the future.)
This can lead to data checksum mismatch, as we can modify the folio
while it's still under writeback, this will make the contents differ
from the contents at submission and checksum calculation.
[FIX]
Instead of fully relying on FGP_STABLE, manually do the folio writeback
waiting, until we set the address space or super flag.
Fixes: e820dbeb6a ("btrfs: convert btrfs_buffered_write() to use folios")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Maxime Chevallier says:
====================
net: freescale: ucc_geth: Phylink conversion
This is V3 of the phylink conversion for ucc_geth.
The main changes in this V3 are related to error handling in the patches
1 and 10 to report an error when the deprecated "interface" property is
found in DT. Doing so, I found and addressed some issues with the jump
labels in the error paths, impacting patches 1 and 10.
The rest of the changes are just a rebase on net-next.
Some of the V2 changes haven't been reviewed, so I stress out that I'm
still uncertain about the way WoL is handled is patches 4 and 10.
Thanks,
Maxime
Link to V1: https://lore.kernel.org/netdev/20241107170255.1058124-1-maxime.chevallier@bootlin.com/
Link to V2: https://lore.kernel.org/netdev/20241114153603.307872-1-maxime.chevallier@bootlin.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ucc_geth is quite capable in terms of supported interfaces, and even
includes an externally controlled PCS (well, TBI). Port that driver to
phylink.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A number of parallel MII interfaces also exist in a "Reduced" mode,
usually with higher clock rates and fewer data lines, to ease the
hardware design. This is what the 'R' stands for in RGMII, RMII, RTBI,
RXAUI, etc.
The UCC Geth controller has a special configuration bit that needs to be
set when the MII mode is one of the supported reduced modes.
Add a local helper for that.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The uec_configure_serdes() function deals with serialized linkmodes
settings. It's used during the link bringup sequence. It is planned to
be used during the phylink conversion for mac configuration, but it
needs to me moved around in the process. To make the phylink port
clearer, this commit moves the function without any feature change.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The preamble length can be configured in ucc_geth, however it just
ends-up always being configured to 7 bytes, as nothing ever changes the
default value of 7.
Make that value the default value when the MACCFG2 register gets
initialized, and remove the code to configure that value altogether.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The frame length check is configured when the phy interface is setup.
However, it's configured according to an internal flag that is always
false. So, just make so that we disable the relevant bit in the MACCFG2
register upon accessing it for other MAC configuration operations.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The WoL opts are represented through a bitmask stored in a u32. As this
mask is copied as-is in the driver, make sure we use the exact same type
to store them internally.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The get/set_wol ethtool ops rely on querying the PHY for its WoL
capabilities, checking for the presence of a PHY and a PHY interrupts
isn't enough. Address that by cleaning up the WoL configuration
sequence.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
As this driver pre-dates phylib, it uses a private pointer to get a
reference to the attached phy_device. Drop that pointer and use the
netdev's pointer instead.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preparing the phylink conversion, split the adjust_link callbaclk, by
clearly separating the mac configuration, link_up and link_down phases.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In april 2007, ucc_geth was converted to phylib with :
commit 728de4c927 ("ucc_geth: migrate ucc_geth to phylib").
In that commit, the device-tree property "interface", that could be used to
retrieve the PHY interface mode was deprecated.
DTS files that still used that property were converted along the way, in
the following commit, also dating from april 2007 :
commit 0fd8c47ccc ("[POWERPC] Replace undocumented interface properties in dts files")
17 years later, there's no users of that property left and I hope it's
safe to say we can remove support from that in the ucc_geth driver,
making the probe() function a bit simpler.
Should there be any users that have a DT that was generated when 2.6.21 was
cutting-edge, print an error message with hints on how to convert the
devicetree if the 'interface' property is found.
With that property gone, we can greatly simplify the parsing of the
phy-interface-mode from the devicetree by using of_get_phy_mode(),
allowing the removal of the open-coded parsing in the driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This doesn't cause a problem currently as HVIEN isn't used elsewhere
yet. Found by inspection.
Signed-off-by: Michael Neuling <michaelneuling@tenstorrent.com>
Fixes: 16b0bde9a3 ("RISC-V: KVM: Add perf sampling support for guests")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20241127041840.419940-1-michaelneuling@tenstorrent.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Introduces necessary quirks to enable audio functionality on the
ASUS Zen AIO 27 Z272SD_A272SD:
- configures verbs to activate internal speakers and headphone jack.
- implements adjustments for headset microphone functionality.
The speaker and jack configurations were derived from a dump of
the working Windows driver, while the headset microphone
functionality was fine-tuned through experimental testing.
Link: https://lore.kernel.org/all/CAGGMHBOGDUnMewBTrZgoBKFk_A4sNF4fEXwfH9Ay8SNTzjy0-g@mail.gmail.com/T/
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20241205210306.977634-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a PCI quirk to enable microphone input on the headphone jack on
the Acer Nitro 5 AN515-58 laptop.
Signed-off-by: Hridesh MG <hridesh699@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241205171843.7787-1-hridesh699@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 5d7e328e20 ("ASoC: cs35l56: Revert support for dual-ownership
of ASP registers")
replaced cs35l56_force_sync_asp1_registers_from_cache() with a dummy
implementation so that the HDA driver would continue to build.
Remove the calls from HDA and remove the stub function.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241206105757.718750-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linux remembers cpu_cachinfo::num_leaves per CPU, but x86 initializes all
CPUs from the same global "num_cache_leaves".
This is erroneous on systems such as Meteor Lake, where each CPU has a
distinct num_leaves value. Delete the global "num_cache_leaves" and
initialize num_leaves on each CPU.
init_cache_level() no longer needs to set num_leaves. Also, it never had to
set num_levels as it is unnecessary in x86. Keep checking for zero cache
leaves. Such condition indicates a bug.
[ bp: Cleanup. ]
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org # 6.3+
Link: https://lore.kernel.org/r/20241128002247.26726-3-ricardo.neri-calderon@linux.intel.com
Commit
5944ce092b ("arch_topology: Build cacheinfo from primary CPU")
adds functionality that architectures can use to optionally allocate and
build cacheinfo early during boot. Commit
6539cffa94 ("cacheinfo: Add arch specific early level initializer")
lets secondary CPUs correct (and reallocate memory) cacheinfo data if
needed.
If the early build functionality is not used and cacheinfo does not need
correction, memory for cacheinfo is never allocated. x86 does not use
the early build functionality. Consequently, during the cacheinfo CPU
hotplug callback, last_level_cache_is_valid() attempts to dereference
a NULL pointer:
BUG: kernel NULL pointer dereference, address: 0000000000000100
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEPMT SMP NOPTI
CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1
RIP: 0010: last_level_cache_is_valid+0x95/0xe0a
Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback
if not done earlier.
Moreover, before determining the validity of the last-level cache info,
ensure that it has been allocated. Simply checking for non-zero
cache_leaves() is not sufficient, as some architectures (e.g., Intel
processors) have non-zero cache_leaves() before allocation.
Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size().
This function iterates over all online CPUs. However, a CPU may have come
online recently, but its cacheinfo may not have been allocated yet.
While here, remove an unnecessary indentation in allocate_cache_info().
[ bp: Massage. ]
Fixes: 6539cffa94 ("cacheinfo: Add arch specific early level initializer")
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org # 6.3+
Link: https://lore.kernel.org/r/20241128002247.26726-2-ricardo.neri-calderon@linux.intel.com
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241202-sysfs-const-bin_attr-x86-v1-1-b767d5f0ac5c@weissschuh.net
The pv_ops::cpu.wbinvd paravirt callback is a leftover of lguest times.
Today it is no longer needed, as all users use the native WBINVD
implementation.
Remove the callback and rename native_wbinvd() to wbinvd().
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241203071550.26487-1-jgross@suse.com
Linux defined feature bits X86_FEATURE_P3 and X86_FEATURE_P4 are not
used anywhere. Commit f31d731e44 ("x86: use X86_FEATURE_NOPL in
alternatives") got rid of the last usage in 2008. Remove the related
mappings and code.
Just like all X86_FEATURE bits, the raw bit numbers can be exposed to
userspace via MODULE_DEVICE_TABLE(). There is a very small theoretical
chance of userspace getting confused if these bits got reassigned and
changed logical meaning. But these bits were never used for a device
table, so it's highly unlikely this will ever happen in practice.
[ dhansen: clarify userspace visibility of these bits ]
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/20241107233000.2742619-1-sohil.mehta%40intel.com
With the __counted_by annocation in cfg80211_scan_request struct,
the "n_channels" struct member must be set before accessing the
"channels" array. Failing to do so will trigger a runtime warning
when enabling CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE.
Fixes: e3eac9f32e ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Link: https://patch.msgid.link/20241203152049.348806-1-lihaoyu499@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All writes to the page now happen before it gets marked as executable
(or after it's already switched to the identmap page tables where it's
OK to be RWX).
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20241205153343.3275139-14-dwmw2@infradead.org
The memory encryption flag is passed in %r8 because that's where the
calling convention puts it. Instead of moving it to %r12 and then using
%r8 for other things, just leave it in %r8 and use other registers
instead.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20241205153343.3275139-13-dwmw2@infradead.org
All writes to the relocate_kernel control page are now done *after* the
%cr3 switch via simple %rip-relative addressing, which means the DATA()
macro with its pointer arithmetic can also now be removed.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20241205153343.3275139-12-dwmw2@infradead.org
The kernel's virtual mapping of the relocate_kernel page currently needs
to be RWX because it is written to before the %cr3 switch.
Now that the relocate_kernel page has its own .data section and local
variables, it can also have *global* variables. So eliminate the separate
page_list argument, and write the same information directly to variables
in the relocate_kernel page instead. This way, the relocate_kernel code
itself doesn't need to copy it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20241205153343.3275139-11-dwmw2@infradead.org
Now that the relocate_kernel page is handled sanely by a linker script
we can have actual data, and just use %rip-relative addressing to access
it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20241205153343.3275139-10-dwmw2@infradead.org
Now that the copy is executed instead of the original, the relocate_kernel
page can live in the kernel's .text section. This will allow subsequent
commits to actually add real data to it and clean up the code somewhat as
well as making the control page ROX.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20241205153343.3275139-9-dwmw2@infradead.org
This currently calls set_memory_x() from machine_kexec_prepare() just
like the 32-bit version does. That's actually a bit earlier than I'd
like, as it leaves the page RWX all the time the image is even *loaded*.
Subsequent commits will eliminate all the writes to the page between the
point it's marked executable in machine_kexec_prepare() the time that
relocate_kernel() is running and has switched to the identmap %cr3, so
that it can be ROX. But that can't happen until it's moved to the .data
section of the kernel, and *that* can't happen until we start executing
the copy instead of executing it in place in the kernel .text. So break
the circular dependency in those commits by letting it be RWX for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20241205153343.3275139-8-dwmw2@infradead.org
There's no need for this to wait until the actual machine_kexec() invocation;
future changes will need to make the control page read-only and executable,
so all writes should be completed before machine_kexec_prepare() returns.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20241205153343.3275139-7-dwmw2@infradead.org
Now that the following fix:
d0ceea662d ("x86/mm: Add _PAGE_NOPTISHADOW bit to avoid updating userspace page tables")
stops kernel_ident_mapping_init() from scribbling over the end of a
4KiB PGD by assuming the following 4KiB will be a userspace PGD,
there's no good reason for the kexec PGD to be part of a single
8KiB allocation with the control_code_page.
( It's not clear that that was the reason for x86_64 kexec doing it that
way in the first place either; there were no comments to that effect and
it seems to have been the case even before PTI came along. It looks like
it was just a happy accident which prevented memory corruption on kexec. )
Either way, it definitely isn't needed now. Just allocate the PGD
separately on x86_64, like i386 already does.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20241205153343.3275139-6-dwmw2@infradead.org
There's no need to swap pages (which involves three memcopies for each
page) in the plain kexec case. Just do a single copy from source to
destination page.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20241205153343.3275139-5-dwmw2@infradead.org
Make the code a little more readable.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Kai Huang <kai.huang@intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20241205153343.3275139-4-dwmw2@infradead.org
Add more comments explaining what each register contains, and save the
preserve_context flag to a non-clobbered register sooner, to keep things
simpler.
No change in behavior intended.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Kai Huang <kai.huang@intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20241205153343.3275139-3-dwmw2@infradead.org
The restore_processor_state() function explicitly states that "the asm code
that gets us here will have restored a usable GDT". That wasn't true in the
case of returning from a ::preserve_context kexec. Make it so.
Without this, the kernel was depending on the called function to reload a
GDT which is appropriate for the kernel before returning.
Test program:
#include <unistd.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <linux/kexec.h>
#include <linux/reboot.h>
#include <sys/reboot.h>
#include <sys/syscall.h>
int main (void)
{
struct kexec_segment segment = {};
unsigned char purgatory[] = {
0x66, 0xba, 0xf8, 0x03, // mov $0x3f8, %dx
0xb0, 0x42, // mov $0x42, %al
0xee, // outb %al, (%dx)
0xc3, // ret
};
int ret;
segment.buf = &purgatory;
segment.bufsz = sizeof(purgatory);
segment.mem = (void *)0x400000;
segment.memsz = 0x1000;
ret = syscall(__NR_kexec_load, 0x400000, 1, &segment, KEXEC_PRESERVE_CONTEXT);
if (ret) {
perror("kexec_load");
exit(1);
}
ret = syscall(__NR_reboot, LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, LINUX_REBOOT_CMD_KEXEC);
if (ret) {
perror("kexec reboot");
exit(1);
}
printf("Success\n");
return 0;
}
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241205153343.3275139-2-dwmw2@infradead.org
Setting and clearing CPU bits in the mm_cpumask is only ever done
by the CPU itself, from the context switch code or the TLB flush
code.
Synchronization is handled by switch_mm_irqs_off() blocking interrupts.
Sending TLB flush IPIs to CPUs that are in the mm_cpumask, but no
longer running the program causes a regression in the will-it-scale
tlbflush2 test. This test is contrived, but a large regression here
might cause a small regression in some real world workload.
Instead of always sending IPIs to CPUs that are in the mm_cpumask,
but no longer running the program, send these IPIs only once a second.
The rest of the time we can skip over CPUs where the loaded_mm is
different from the target mm.
Reported-by: kernel test roboto <oliver.sang@intel.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20241204210316.612ee573@fangorn
Closes: https://lore.kernel.org/oe-lkp/202411282207.6bd28eae-lkp@intel.com/
The code in flush_tlb_func() that removes a remote CPU from the
cpumask if it is no longer running the target mm is also needed
on the originating CPU of a TLB flush, now that CPUs are no
longer cleared from the mm_cpumask at context switch time.
Flushing the TLB when we are not running the target mm is
harmless, because the CPU's tlb_gen only gets updated to
match the mm_tlb_gen, but it does hit this warning:
WARN_ON_ONCE(local_tlb_gen > mm_tlb_gen);
[ 210.343902][ T4668] WARNING: CPU: 38 PID: 4668 at arch/x86/mm/tlb.c:815 flush_tlb_func (arch/x86/mm/tlb.c:815)
Removing both local and remote CPUs from the mm_cpumask
when doing a flush for a not currently loaded mm avoids
that warning.
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20241205104630.755706ca@fangorn
Closes: https://lore.kernel.org/oe-lkp/202412051551.690e9656-lkp@intel.com
According to DT bindings, the property is called 'battery-detect-gpios',
not 'bat-detect-gpio'. Update the property as such.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/Z1K1rnndKGIFdgfj@standask-GA-A55M-S2HP
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
drm_panel_init() was made to initialize the fields in |struct drm_panel|.
There is no need to separately initialize them again.
Drop the separate assignments that are redundant. Also fix up any uses
of `ctx->panel.dev` to use `dev` directly.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204093942.1374693-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Commit 7c7e6c8924 ("tty: serial: handle HAS_IOPORT dependencies")
triggers warning backtraces on a number of platforms which don't support
IO ports.
WARNING: CPU: 0 PID: 0 at drivers/tty/serial/8250/8250_port.c:470 serial8250_set_defaults+0x148/0x1d8
Unsupported UART type 0
The problem is seen because serial8250_set_defaults() is called for
all members of the serial8250_ports[] array even if that array is
not initialized.
Work around the problem by only displaying the warning if the port
type is not 0 (UPIO_PORT) or if iobase is set for the port.
Fixes: 7c7e6c8924 ("tty: serial: handle HAS_IOPORT dependencies")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Stafford Horne <shorne@gmail.com>
Link: https://lore.kernel.org/r/20241205143033.2695333-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the function yas537_measure() there is a clamp_val() with limits of
-BIT(13) and BIT(13) - 1. The input clamp value h[] is of type s32. The
BIT() is of type unsigned long integer due to its define in
include/vdso/bits.h. The lower limit -BIT(13) is recognized as -8192 but
expressed as an unsigned long integer. The size of an unsigned long
integer differs between 32-bit and 64-bit architectures. Converting this
to type s32 may lead to undesired behavior.
Additionally, in the calculation lines h[0], h[1] and h[2] the unsigned
long integer divisor BIT(13) causes an unsigned division, shifting the
left-hand side of the equation back and forth, possibly ending up in large
positive values instead of negative values on 32-bit architectures.
To solve those two issues, declare a signed integer with a value of
BIT(13).
There is another omission in the clamp line: clamp_val() returns a value
and it's going nowhere here. Self-assign it to h[i] to make use of the
clamp macro.
Finally, replace clamp_val() macro by clamp() because after changing the
limits from type unsigned long integer to signed integer it's fine that
way.
Link: https://lkml.kernel.org/r/11609b2243c295d65ab4d47e78c239d61ad6be75.1732914810.git.jahau@rocketmail.com
Fixes: 65f79b5010 ("iio: magnetometer: yas530: Add YAS537 variant")
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411230458.dhZwh3TT-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202411282222.oF0B4110-lkp@intel.com/
Reviewed-by: David Laight <david.laight@aculab.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
