Add support for handling receipt of partial inner packets that have
been fragmented across multiple outer IP-TFS tunnel packets.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add handling of packets received from the tunnel. This implements
tunnel egress functionality.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add support for tunneling user (inner) packets that are larger than the
tunnel's path MTU (outer) using IP-TFS fragmentation.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When possible rather than appending secondary (aggregated) inner packets
to the fragment list, share their page fragments with the outer IPTFS
packet. This allows for more efficient packet transmission.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add tunnel packet output functionality. This is code handles
the ingress to the tunnel.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add a new xfrm mode implementing AggFrag/IP-TFS from RFC9347.
This utilizes the new xfrm_mode_cbs to implement demand-driven IP-TFS
functionality. This functionality can be used to increase bandwidth
utilization through small packet aggregation, as well as help solve PMTU
issues through it's efficient use of fragmentation.
Link: https://www.rfc-editor.org/rfc/rfc9347.txt
Multiple commits follow to build the functionality into xfrm_iptfs.c
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Define `XFRM_MODE_IPTFS` and `IPSEC_MODE_IPTFS` constants, and add these to
switch case and conditionals adjacent with the existing TUNNEL modes.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add a set of callbacks xfrm_mode_cbs to xfrm_state. These callbacks
enable the addition of new xfrm modes, such as IP-TFS to be defined
in modules.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add the RFC assigned IP protocol number for AGGFRAG.
Add the on-wire basic and congestion-control IP-TFS packet headers.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Change bnxt_re_destroy_qp to always return 0 and don't fail
in case of error during destroy.
In addition, delete debugfs QP to earlier stage.
Fixes: d7d54769c0 ("RDMA/bnxt_re: Add debugfs hook in the driver")
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241204075416.478431-6-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The workaround to modify the UD QP from RTS to RTS is required
only for older adapters. Issuing this for latest adapters can caus
some unexpected behavior. Fix it
Fixes: 1801d87b35 ("RDMA/bnxt_re: Support new 5760X P7 devices")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241204075416.478431-4-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Software Queues to hold the WRs needs to be created
for only kernel queues. Avoid allocating the unnecessary
memory for user Queues.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Fixes: 159fb4ceac ("RDMA/bnxt_re: introduce a function to allocate swq")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241204075416.478431-3-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Gen P7 supports up to 13 SGEs for now. WQE software structure
can hold only 6 now. Since the max send sge is reported as
13, the stack can give requests up to 13 SGEs. This is causing
traffic failures and system crashes.
Use the define for max SGE supported for variable size. This
will work for both static and variable WQEs.
Fixes: 227f51743b ("RDMA/bnxt_re: Fix the max WQE size for static WQE support")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241204075416.478431-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
lookup and resize can run in parallel.
The xfrm_state_hash_generation seqlock ensures a retry, but the hash
functions can observe a hmask value that is too large for the new hlist
array.
rehash does:
rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..]
net->xfrm.state_hmask = nhashmask;
While state lookup does:
h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family);
hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {
This is only safe in case the update to state_bydst is larger than
net->xfrm.xfrm_state_hmask (or if the lookup function gets
serialized via state spinlock again).
Fix this by prefetching state_hmask and the associated pointers.
The xfrm_state_hash_generation seqlock retry will ensure that the pointer
and the hmask will be consistent.
The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side,
add lockdep assertions to document that they are only safe for insert
side.
xfrm_state_lookup_byaddr() uses the spinlock rather than RCU.
AFAICS this is an oversight from back when state lookup was converted to
RCU, this lock should be replaced with RCU in a future patch.
Reported-by: syzbot+5f9f31cb7d985f584d8e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/CACT4Y+azwfrE3uz6A5ZErov5YN2LYBN5KrsymBerT36VU8qzBA@mail.gmail.com/
Diagnosed-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: c2f672fc94 ("xfrm: state lookup can be lockless")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Different core device types such as PFs and VFs shouldn't be affiliated
together since they have different capabilities, fix that by enforcing
type check before doing the affiliation.
Fixes: 32f69e4be2 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/88699500f690dff1c1852c1ddb71f8a1cc8b956e.1733233480.git.leonro@nvidia.com
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In the original flow, the crystal_cap might be calculated as a negative
value and set as an overflow value. Therefore, we added a check to limit
the calculated crystal_cap value. Additionally, we shrank the crystal_cap
adjustment according to specific CFO.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-7-pkshih@realtek.com
The original handling will iterate all active links under the given sta
and apply the changes to each. Now, stack tweaks ops from sta_rc_update
to link_sta_rc_update, which means targeting a given link. Then, our link
iteration looks redundant. So, refine it to apply the changes to the link
directly.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-6-pkshih@realtek.com
The PPDU status of probe response will fail to parse the IE due to being
filtered by the to_self check. Therefore, we parse RSSI from PHY report in
RX descriptor.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-5-pkshih@realtek.com
Declare beacon filter and connection monitor for 8852BT.
This offloads connection monitor mechanism to firmware, and this
is required for the MCC feature.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-4-pkshih@realtek.com
Declare beacon filter and connection monitor for 8852B.
This offloads connection monitor mechanism to firmware, and this
is required for the MCC feature.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-3-pkshih@realtek.com
Extend the bitfield for duration in channel info to 16 bits.
Update the related format in H2C and C2H, then increase firmware
format sequence to 3.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-2-pkshih@realtek.com
A build failure has been reported with the following details:
In file included from include/linux/string.h:390,
from include/linux/bitmap.h:13,
from include/linux/cpumask.h:12,
from include/linux/smp.h:13,
from include/linux/lockdep.h:14,
from include/linux/spinlock.h:63,
from include/linux/wait.h:9,
from include/linux/wait_bit.h:8,
from include/linux/fs.h:6,
from kernel/auditsc.c:37:
In function 'sized_strscpy',
inlined from '__audit_ptrace' at kernel/auditsc.c:2732:2:
>> include/linux/fortify-string.h:293:17:
error: call to '__write_overflow' declared with attribute error:
detected write beyond size of object (1st parameter)
293 | __write_overflow();
| ^~~~~~~~~~~~~~~~~~
In function 'sized_strscpy',
inlined from 'audit_signal_info_syscall' at kernel/auditsc.c:2759:3:
>> include/linux/fortify-string.h:293:17:
error: call to '__write_overflow' declared with attribute error:
detected write beyond size of object (1st parameter)
293 | __write_overflow();
| ^~~~~~~~~~~~~~~~~~
The issue appears to be a GCC bug, though the root cause remains
unclear at this time. For now, let's implement a workaround.
A bug report has also been filed with GCC [0].
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117912 [0]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410171420.1V00ICVG-lkp@intel.com/
Reported-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Closes: https://lore.kernel.org/all/20241128182435.57a1ea6f@gandalf.local.home/
Reported-by: Zhuo, Qiuxu <qiuxu.zhuo@intel.com>
Closes: https://lore.kernel.org/all/CY8PR11MB71348E568DBDA576F17DAFF389362@CY8PR11MB7134.namprd11.prod.outlook.com/
Originally-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/linux-hardening/202410171059.C2C395030@keescook/
Signed-off-by: Yafang shao <laoar.shao@gmail.com>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
[PM: subject tweak, description line wrapping]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-12-03 (ice, idpf, ixgbe, ixgbevf, igb)
This series contains updates to ice, idpf, ixgbe, ixgbevf, and igb
drivers.
For ice:
Arkadiusz corrects search for determining whether PHY clock recovery is
supported on the device.
Przemyslaw corrects mask used for PHY timestamps on ETH56G devices.
Wojciech adds missing virtchnl ops which caused NULL pointer
dereference.
Marcin fixes VLAN filter settings for uplink VSI in switchdev mode.
For idpf:
Josh restores setting of completion tag for empty buffers.
For ixgbevf:
Jake removes incorrect initialization/support of IPSEC for mailbox
version 1.5.
For ixgbe:
Jake rewords and downgrades misleading message when negotiation
of VF mailbox version is not supported.
Tore Amundsen corrects value for BASE-BX10 capability.
For igb:
Yuan Can adds proper teardown on failed pci_register_driver() call.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igb: Fix potential invalid memory access in igb_init_module()
ixgbe: Correct BASE-BX10 compliance code
ixgbe: downgrade logging of unsupported VF API version to debug
ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5
idpf: set completion tag for "empty" bufs associated with a packet
ice: Fix VLAN pruning in switchdev mode
ice: Fix NULL pointer dereference in switchdev
ice: fix PHY timestamp extraction for ETH56G
ice: fix PHY Clock Recovery availability check
====================
Link: https://patch.msgid.link/20241203215521.1646668-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use new member visible to simplify setting the static visibility.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/dba77e76-be45-4a30-96c7-45e284072ad2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5 misc fixes 2024-12-03
This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
====================
Link: https://patch.msgid.link/20241203204920.232744-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously a workaround was added to avoid syndrome 0xcdb051. It is
triggered when offload a rule with tunnel encapsulation, and
forwarding to another table, but not matching on the internal port in
firmware steering mode. The original workaround skips internal tunnel
port logic, which is not correct as not all cases are considered. As
an example, if vlan is configured on the uplink port, traffic can't
pass because vlan header is not added with this workaround. Besides,
there is no such issue for software steering. So, this patch removes
that, and returns error directly if trying to offload such rule for
firmware steering.
Fixes: 06b4eac9c4 ("net/mlx5e: Don't offload internal port if filter device is out device")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Tested-by: Frode Nordahl <frode.nordahl@canonical.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a multi-PF netdev, each traffic channel creates its own resources
against a specific PF.
In the cited commit, where this support was added, the channel_param
logic was mistakenly kept unchanged, so it always used the primary PF
which is found at priv->mdev.
In this patch we fix this by moving the logic to be per-channel, and
passing the correct mdev instance.
This bug happened to be usually harmless, as the resulting cparam
structures would be the same for all channels, due to identical FW logic
and decisions.
However, in some use cases, like fwreset, this gets broken.
This could lead to different symptoms. Example:
Error cqe on cqn 0x428, ci 0x0, qn 0x10a9, opcode 0xe, syndrome 0x4,
vendor syndrome 0x32
Fixes: e4f9686bde ("net/mlx5e: Let channels be SD-aware")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the mentioned commit change for MPV mode, since in MPV mode the IB
device is shared between different core devices, so under this change
when moving both devices simultaneously to switchdev mode the IB device
removal and re-addition can race with itself causing unexpected behavior.
In such case do rescan_drivers() only once in order to add the ethernet
representor auxiliary device, and skip adding and removing IB devices.
Fixes: ab85ebf437 ("net/mlx5: E-switch, refactor eswitch mode change")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case that IB device is already disabled when moving to switchdev mode,
which can happen when working with LAG, need to do rescan_drivers()
before leaving in order to add ethernet representor auxiliary device.
Fixes: ab85ebf437 ("net/mlx5: E-switch, refactor eswitch mode change")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It allocates a match template, which creates a compressed definer fc
struct, but that is not deallocated.
This commit fixes that.
Fixes: 74a778b4a6 ("net/mlx5: HWS, added definers handling")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor program_dpkgc function so that all initialized variables
of same type are clubbed together.
--v2
-Modify commit message to reflect what is being done in patch [Mitul]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-6-suraj.kandpal@intel.com
Increase the latency programmed into PKG_C_LATENCY latency to be
a multiple of line time which is written into WM_LINETIME.
--v2
-Fix commit subject line [Sai Teja]
-Use individual DISPLAY_VER checks instead of range [Sai Teja]
-Initialize max_linetime [Sai Teja]
--v3
-take into account the scenario when adjusted_latency is 0 [Vinod]
--v4
-rename adjusted_latency to latency [Mitul]
-fix the condition in which dpkgc is disabled [Vinod]
--v5
-Add check to see if max_linetime is 0 [Vinod]
--v6
-Avoid nested if statements [Mitul]
WA: 22020299601
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-5-suraj.kandpal@intel.com
Refactor the code to check the fixed refresh rate condition in the dpkgc
function itself and call it from intel_atomic_commit_tail so that we
have all the required values specially linetime which is computed after
intel_wm_compute, this will also help implement some WA's which requires
linetime. This also avoid writing into any of the registers while we are
in compute_config phase.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-4-suraj.kandpal@intel.com
Use intel_display for DPKGC code wherever we can. While we are
at it also use intel_de_rmw instead of intel_uncore_rmw as we
really don't need the internal uncore_rmw_function.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-3-suraj.kandpal@intel.com
Refactor the value getting prepped to be written into the PKG_C_LATENCY
register by ORing the REG_FIELD_PREP values instead of having val
getting operated on twice.
We dont need the clear and val variables to be initialized.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-2-suraj.kandpal@intel.com
Initialize max_latency variable to LNL_PKG_C_LATENCY_MASK which helps
to eliminate the else block and make the whole code a lot cleaner.
--v2
-Seprate patch to club variables together [Mitul]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203084706.2126189-1-suraj.kandpal@intel.com
David Wei says:
====================
bnxt_en: support header page pool in queue API
Commit 7ed816be35 ("eth: bnxt: use page pool for head frags") added a
separate page pool for header frags. Now, frags are allocated from this
header page pool e.g. rxr->tpa_info.data.
The queue API did not properly handle rxr->tpa_info and so using the
queue API to i.e. reset any queues will result in pages being returned
to the incorrect page pool, causing inflight != 0 warnings.
Fix this bug by properly allocating/freeing tpa_info and copying/freeing
head_pool in the queue API implementation.
The 1st patch is a prep patch that refactors helpers out to be used by
the implementation patch later.
The 2nd patch is a drive-by refactor. Happy to take it out and re-send
to net-next if there are any objections.
The 3rd patch is the implementation patch that will properly alloc/free
rxr->tpa_info.
====================
Link: https://patch.msgid.link/20241204041022.56512-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 7ed816be35 ("eth: bnxt: use page pool for head frags") added a
page pool for header frags, which may be distinct from the existing pool
for the aggregation ring. Prior to this change, frags used in the TPA
ring rx_tpa were allocated from system memory e.g. napi_alloc_frag()
meaning their lifetimes were not associated with a page pool. They can
be returned at any time and so the queue API did not alloc or free
rx_tpa.
But now frags come from a separate head_pool which may be different to
page_pool. Without allocating and freeing rx_tpa, frags allocated from
the old head_pool may be returned to a different new head_pool which
causes a mismatch between the pp hold/release count.
Fix this problem by properly freeing and allocating rx_tpa in the queue
API implementation.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241204041022.56512-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor bnxt_rx_ring_info->tpa_info operations into helpers that work
on a single tpa_info in prep for queue API using them.
There are 2 pairs of operations:
* bnxt_alloc_one_tpa_info()
* bnxt_free_one_tpa_info()
These alloc/free the tpa_info array itself.
* bnxt_alloc_one_tpa_info_data()
* bnxt_free_one_tpa_info_data()
These alloc/free the frags stored in tpa_info array.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241204041022.56512-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, sendmmsg is implemented in udpgso_bench_tx.c,
but it is not called by any test script.
This patch adds a test for sendmmsg in udpgso_bench.sh.
This allows for basic API testing and benchmarking
comparisons with GSO.
Signed-off-by: Kenjiro Nakayama <nakayamakenjiro@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241203222843.26983-1-nakayamakenjiro@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UDP send path suffers from one indirect call to ip_generic_getfrag()
We can use INDIRECT_CALL_1() to avoid it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241203173617.2595451-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: add negotiation of in-band capabilities
This is a repost without RFC for this series, shrunk down to 13 patches
by removing the non-Marvell PCS.
Phylink's handling of in-band has been deficient for a long time, and
people keep hitting problems with it. Notably, situations with the way-
to-late standardized 2500Base-X and whether that should or should not
have in-band enabled. We have also been carrying a hack in the form of
phylink_phy_no_inband() for a PHY that has been used on a SFP module,
but has no in-band capabilities, not even for SGMII.
When phylink is trying to operate in in-band mode, this series will look
at the capabilities of the MAC-side PCS and PHY, and work out whether
in-band can or should be used, programming the PHY as appropriate. This
includes in-band bypass mode at the PHY.
We don't... yet... support bypass on the MAC side PCS, because that
requires yet more complexity.
Patch 1 passes struct phylink and struct phylink_pcs into
phylink_pcs_neg_mode() so we can look at more state in this function in
a future patch.
Patch 2 splits "cur_link_an_mode" (the MLO_AN_* mode) into two separate
purposes - a requested and an active mode. The active mode is the one
we will be using for the MAC, which becomes dependent on the result of
in-band negotiation.
Patch 3 adds debug to phylink_major_config() so we can see what is going
on with the requested and active AN modes.
Patch 4 adds to phylib a method to get the in-band capabilities of the
PHY from phylib. Patches 5 and 6 add implementations for BCM84881 and
some Marvell PHYs found on SFPs.
Patch 7 adds to phylib a method to configure the PHY in-band signalling,
and patch 8 implements it for those Marvell PHYs that support the method
in patch 4.
Patch 9 does the same as patch 4 but for the MAC-side PCS, with patches
10 and 11 adding support to Marvell NETA and PP2.
Patch 12 adds the code to phylink_pcs_neg_mode() which looks at the
capabilities, and works out whether to use in-band or out-band mode for
driving the link between the MAC PCS and PHY.
Patch 13 removes the phylink_phy_no_inband() hack now that we are
publishing the in-band capabilities from the BCM84881 PHY driver.
Three more PCS, omitted from this series due to the limit of 15 patches,
will be sent once this has been merged.
====================
Link: https://patch.msgid.link/Z08kCwxdkU4n2V6x@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove phylink_phy_no_inband() now that we are handling the lack of
inband negotiation by querying the capabilities of the PHY and PCS,
and the BCM84881 PHY driver provides us the information necessary to
make the decision.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUsO-006IUt-KN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support for in-band signalling with Serdes links is uncertain. Some
PHYs do not support in-band for e.g. SGMII. Some PCS do not support
in-band for 2500Base-X. Some PCS require in-band for Base-X protocols.
Simply using what is in DT is insufficient when we have hot-pluggable
PHYs e.g. in the form of SFP modules, which may not provide the
in-band signalling.
In order to address this, we have introduced phy_inband_caps() and
pcs_inband_caps() functions to allow phylink to retrieve the
capabilities from each end of the PCS/PHY link. This commit adds code
to resolve whether in-band will be used in the various scenarios that
we have: In-band not being used, PHY present using SGMII or Base-X,
PHY not present. We also deal with no capabilties provided.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUsJ-006IUn-H3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report the PCS in-band capabilities to phylink for Marvell PP2
interfaces.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUsE-006IUh-E7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
