Report the PCS in-band capabilities to phylink for Marvell NETA
interfaces.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUs9-006IUb-Au@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a pcs_inband_caps() method to query the PCS for its inband link
capabilities, and use this to determine whether link modes used with
optical SFPs can be supported.
When a PCS does not provide a method, we allow inband negotiation to
be either on or off, making this a no-op until the pcs_inband_caps()
method is implemented by a PCS driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUs4-006IUU-7K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the config_inband() method for Marvell 88E1112, 88E1111,
and Finisar's 88E1111 variant.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrz-006IUO-3r@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a method to configure the PHY's in-band mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUru-006IUI-08@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide an implementation for phy_inband_caps() for Marvell PHYs used
on SFP modules, so that phylink knows the PHYs capabilities.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUro-006IUC-Rq@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BCM84881 has no support for inband signalling, so this is a trivial
implementation that returns no support for inband.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/E1tIUrj-006IU6-ON@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a method to query the PHY's in-band capabilities for a PHY
interface mode.
Where the interface mode does not have in-band capability, or the PHY
driver has not been updated to return this information, then
phy_inband_caps() should return zero. Otherwise, PHY drivers will
return a value consisting of the following flags:
LINK_INBAND_DISABLE indicates that the hardware does not support
in-band signalling, or can have in-band signalling configured via
software to be disabled.
LINK_INBAND_ENABLE indicates that the hardware will use in-band
signalling, or can have in-band signalling configured via software
to be enabled.
LINK_INBAND_BYPASS indicates that the hardware has the ability to
bypass in-band signalling when enabled after a timeout if the link
partner does not respond to its in-band signalling.
This reports the PHY capabilities for the particular interface mode,
not the current configuration.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUre-006ITz-KF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have a more complexity in phylink_major_config(), augment
the debugging so we can see what's going on there.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrZ-006ITt-Fa@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is an interdependence between the current link_an_mode and
pcs_neg_mode that some drivers rely upon to know whether inband or PHY
mode will be used.
In order to support detection of PCS and PHY inband capabilities
resulting in automatic selection of inband or PHY mode, we need to
cater for this, and support changing the MAC link_an_mode. However, we
end up with an inter-dependency between the current link_an_mode and
pcs_neg_mode.
To solve this, split the current link_an_mode into the requested
link_an_mode and active link_an_mode. The requested link_an_mode will
always be passed to phylink_pcs_neg_mode(), and the active link_an_mode
will be used for everything else, and only updated during
phylink_major_config(). This will ensure that phylink_pcs_neg_mode()'s
link_an_mode will not depend on the active link_an_mode that will,
in a future patch, depend on pcs_neg_mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrU-006ITn-Ai@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the call to phylink_pcs_neg_mode() in phylink_major_config() after
we have selected the appropriate PCS to allow the PCS to be passed in.
Add struct phylink and struct phylink_pcs pointers to
phylink_pcs_neg_mode() and pass in the appropriate structures. Set
pl->pcs_neg_mode before returning, and remove the return value.
This will allow the capabilities of the PCS and any PHY to be used when
deciding which pcs_neg_mode should be used.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrP-006ITh-6u@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver is currently using an ACL key block that is not supported by
Spectrum-4. This works because the driver is only using a single field
from this key block which is located in the same offset in the
equivalent Spectrum-4 key block.
The issue was discovered when the firmware started rejecting the use of
the unsupported key block. The change has been reverted to avoid
breaking users that only update their firmware.
Nonetheless, fix the issue by using the correct key block.
Fixes: 07ff135958 ("mlxsw: Introduce flex key elements for Spectrum-4")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/35e72c97bdd3bc414fb8e4d747e5fb5d26c29658.1733237440.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maksym Kutsevol says:
====================
netcons: Add udp send fail statistics to netconsole
Enhance observability of netconsole. Packet sends can fail.
Start tracking at least two failure possibilities: ENOMEM and
NET_XMIT_DROP for every target. Stats are exposed via an additional
attribute in CONFIGFS.
The exposed statistics allows easier debugging of cases when netconsole
messages were not seen by receivers, eliminating the guesswork if the
sender thinks that messages in question were sent out.
Stats are not reset on enable/disable/change remote ip/etc, they
belong to the netcons target itself.
====================
Link: https://patch.msgid.link/20241202-netcons-add-udp-send-fail-statistics-to-netconsole-v5-0-70e82239f922@kutsevol.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enhance observability of netconsole. Packet sends can fail.
Start tracking at least two failure possibilities: ENOMEM and
NET_XMIT_DROP for every target. Stats are exposed via an additional
attribute in CONFIGFS.
The exposed statistics allows easier debugging of cases when netconsole
messages were not seen by receivers, eliminating the guesswork if the
sender thinks that messages in question were sent out.
Stats are not reset on enable/disable/change remote ip/etc, they
belong to the netcons target itself.
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/all/ZsWoUzyK5du9Ffl+@gmail.com/
Signed-off-by: Maksym Kutsevol <max@kutsevol.com>
Link: https://patch.msgid.link/20241202-netcons-add-udp-send-fail-statistics-to-netconsole-v5-2-70e82239f922@kutsevol.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netpoll_send_udp can return if send was successful.
It will allow client code to be aware of the send status.
Possible return values are the result of __netpoll_send_skb (cast to int)
and -ENOMEM. This doesn't cover the case when TX was not successful
instantaneously and was scheduled for later, __netpoll__send_skb returns
success in that case.
Signed-off-by: Maksym Kutsevol <max@kutsevol.com>
Link: https://patch.msgid.link/20241202-netcons-add-udp-send-fail-statistics-to-netconsole-v5-1-70e82239f922@kutsevol.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In cases where we want a stable way to observe/trace
cap_capable (e.g. protection from inlining and API updates)
add a tracepoint that passes:
- The credentials used
- The user namespace of the resource being accessed
- The user namespace in which the credential provides the
capability to access the targeted resource
- The capability to check for
- The return value of the check
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Link: https://lore.kernel.org/r/20241204155911.1817092-1-linux@jordanrome.com
Signed-off-by: Serge Hallyn <sergeh@kernel.org>
The cap_mmap_file() LSM callback returns the default value for the
security_mmap_file() LSM hook and can be safely removed.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Serge Hallyn <sergeh@kernel.org>
A bitset without mask in a _SET request means we want exactly the bits in
the bitset to be set. This works correctly for compact format but when
verbose format is parsed, ethnl_update_bitset32_verbose() only sets the
bits present in the request bitset but does not clear the rest. The commit
6699170376 ("ethtool: fix application of verbose no_mask bitset") fixes
this issue by clearing the whole target bitmap before we start iterating.
The solution proposed brought an issue with the behavior of the mod
variable. As the bitset is always cleared the old value will always
differ to the new value.
Fix it by adding a new function to compare bitmaps and a temporary variable
which save the state of the old bitmap.
Fixes: 6699170376 ("ethtool: fix application of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20241202153358.1142095-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the __netpoll_setup() function, when accessing the device's npinfo
pointer, replace rcu_access_pointer() with rtnl_dereference(). This
change is more appropriate, as suggested by Herbert Xu[1].
The function is called with the RTNL mutex held, and the pointer is
being dereferenced later, so, dereference earlier and just reuse the
pointer for the if/else.
The replacement ensures correct pointer access while maintaining
the existing locking and RCU semantics of the netpoll subsystem.
Link: https://lore.kernel.org/lkml/Zz1cKZYt1e7elibV@gondor.apana.org.au/ [1]
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20241202-netpoll_rcu_herbet_fix-v2-1-2b9d58edc76a@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The aux_payload_buf allocation in SMB2 read is performed without ensuring
alignment, which could result in out-of-bounds (OOB) reads during
cryptographic operations such as crypto_xor or ghash. This patch aligns
the allocation of aux_payload_buf to prevent these issues.
(Note that to add this patch to stable would require modifications due
to recent patch "ksmbd: use __GFP_RETRY_MAYFAIL")
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It is to be handled with the rest of the IP51xx/52xx family.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-7-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On parts where there is no status register, check the Charge End
bit to set charging/not charging status. Fullness, trickle charge
status, discharging etc. cannot be determined from just this bit.
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-6-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Some parts may not have certain control bits. These bits
however may be non-essential to the system's operation,
as the default behaviour is the one we would set anyways,
or the bits are not applicable for said part (e. g. enabling
NTC on a part without an NTC pin, or one where it cannot
be disabled via registers anyways).
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-5-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
IP53xx series supports 4.4V batteries. Add support for it
to compatible parts (that have `vbat_max` set to >= 4.4 V).
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-4-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Other parts such as IP5306 may support other battery voltages and
have different constants for input voltage regulation. Allow these
to be passed from `struct ip5xxx_regfield_config`.
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-3-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If ADC read returns an error, the return value was silently ignored,
execution continued and an uninitialized value and a return code of 0
was passed back to userspace. The only exception was
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, which bailed out correctly.
Fix returns for the other cases as well.
Fixes: 75853406fa ("power: supply: Add a driver for Injoinic power bank ICs")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-2-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Spares an extra revalidation request
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Instead of looping through all properties known to be supported by the
psy, loop over all known properties and decide based on the return value
of power_supply_get_property() whether the property existed.
This makes the code shorter now and even more so when power supply
extensions are added.
It also simplifies the locking, as it can all happen inside
power_supply_get_property().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241111-power-supply-extensions-v4-6-7240144daa8e@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The upcoming extension API will add properties which are not part of the
the power_supply_desc.
Use power_supply_has_property() so the properties from extensions are
also checked.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241111-power-supply-extensions-v4-5-7240144daa8e@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The upcoming extension API will add properties which are not part of the
the power_supply_desc.
Use power_supply_has_property() so the properties from extensions are
also checked.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241111-power-supply-extensions-v4-4-7240144daa8e@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Introduce a helper to check if a power supply implements a certain
property. It will be used by the sysfs and hwmon code to remove similar
open-coded checks.
It also paves the way for the extension API to hook into.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241111-power-supply-extensions-v4-3-7240144daa8e@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The function only takes a desc as parameter, align the naming.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241111-power-supply-extensions-v4-2-7240144daa8e@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Currently an uevent contains the same string representation of a
property as sysfs. However for POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR this
is specially formatted to indicate all possible values.
This doesn't make sense for uevents and complicates parsing.
Instead only include the currently active value in uevents.
As currently no in-tree driver uses POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR
this change is not a problem.
Soon the property will actually be used so fix the formatting before
that happens.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241111-power-supply-extensions-v4-1-7240144daa8e@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
It should only have generic flags in the array but the recent header
sync brought a new flags to fcntl.h and caused a build error. Let's
update the shell script to exclude flags specific to name_to_handle_at().
CC trace/beauty/fs_at_flags.o
In file included from trace/beauty/fs_at_flags.c:21:
tools/perf/trace/beauty/generated/fs_at_flags_array.c:13:30: error: initialized field overwritten [-Werror=override-init]
13 | [ilog2(0x002) + 1] = "HANDLE_CONNECTABLE",
| ^~~~~~~~~~~~~~~~~~~~
tools/perf/trace/beauty/generated/fs_at_flags_array.c:13:30: note: (near initialization for ‘fs_at_flags[2]’)
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241203035349.1901262-12-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
09d6775f50 riscv: Add support for userspace pointer masking
91e102e797 prctl: arch-agnostic prctl for shadow stack
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241203035349.1901262-11-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
aefff51e1c statmount: retrieve security mount options
2f4d4503e9 statmount: add flag to retrieve unescaped options
44010543fc fs: add the ability for statmount() to report the sb_source
ed9d95f691 fs: add the ability for statmount() to report the fs_subtype
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/mount.h include/uapi/linux/mount.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20241203035349.1901262-10-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
c374196b2b ("fs: name_to_handle_at() support for "explicit connectable" file handles")
95f567f81e ("fs: Simplify getattr interface function checking AT_GETATTR_NOSEC flag")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20241203035349.1901262-9-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
3630e82ab6 ("mman: Add map_shadow_stack() flags")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/mman.h include/uapi/asm-generic/mman.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20241203035349.1901262-8-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
6140be90ec ("fs/xattr: add *at family syscalls")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/perf/arch/x86/entry/syscalls/syscall_32.tbl arch/x86/entry/syscalls/syscall_32.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
The arm64 changes are not included as it requires more changes in the
tools. It'll be worked for the later cycle.
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
CC: x86@kernel.org
CC: linux-mips@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-s390@vger.kernel.org
Link: https://lore.kernel.org/r/20241203035349.1901262-7-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
97413cea1c ("KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: kvmarm@lists.linux.dev
Link: https://lore.kernel.org/r/20241203035349.1901262-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
a0423af92c ("x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest")
0c487010cb ("x86/cpufeatures: Add X86_FEATURE_AMD_WORKLOAD_CLASS feature bit")
1ad4667066 ("x86/cpufeatures: Add X86_FEATURE_AMD_HETEROGENEOUS_CORES")
104edc6efc ("x86/cpufeatures: Rename X86_FEATURE_FAST_CPPC to have AMD prefix")
3ea87dfa31 ("x86/cpufeatures: Add a IBPB_NO_RET BUG flag")
ff898623af ("x86/cpufeatures: Define X86_FEATURE_AMD_IBPB_RET")
dcb988cdac ("KVM: x86: Quirk initialization of feature MSRs to KVM's max configuration")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Link: https://lore.kernel.org/r/20241203035349.1901262-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
e785dfacf7 ("LoongArch: KVM: Add PCHPIC device support")
2e8b9df826 ("LoongArch: KVM: Add EIOINTC device support")
c532de5a67 ("LoongArch: KVM: Add IPI device support")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: kvm@vger.kernel.org
Cc: loongarch@lists.linux.dev
Link: https://lore.kernel.org/r/20241203035349.1901262-4-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
18d92bb57c ("perf/core: Add aux_pause, aux_resume, aux_start_paused")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241203035349.1901262-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
56c594d8df ("drm: add DRM_SET_CLIENT_NAME ioctl")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20241203035349.1901262-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Charge full holds the calculated full capacity of the cell based on all
inputs from the ModelGauge m5 algorithm including empty compensation. A
new full-capacity value is calculated continuously as application
conditions change.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://lore.kernel.org/r/20241203-max1720x-charge-full-prop-v1-1-b02776b43f17@liebherr.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Originally, #VE was defined as the TDX behavior in order to support
paravirtualization of x86 features that can’t be virtualized by the TDX
module. The intention is that if guest software wishes to use such a
feature, it implements some logic to support this. This logic resides in
the #VE exception handler it may work in cooperation with the host VMM.
Theoretically, the guest TD’s #VE handler was supposed to act as a "TDX
enlightenment agent" inside the TD. However, in practice, the #VE
handler is simplistic:
- #VE on CPUID is handled by returning all-0 to the code which
executed CPUID. In many cases, an all-0 value is not the correct
value, and may cause improper operation.
- #VE on RDMSR is handled by requesting the MSR value from the host
VMM. This is prone to security issues since the host VMM is
untrusted. It may also be functionally incorrect in case the
expected operation is to paravirtualize some CPU functionality.
Newer TDX modules provide a "REDUCE_VE" feature. When enabled, it
drastically cuts cases when guests receive #VE on MSR and CPUID
accesses. Basically, instead of punting the problem to the VMM, the
TDX module fills in good data. What the TDX module provides is
obviously highly specific to the MSR or CPUID. This is all spelled
out in excruciating detail in the TDX specs.
Enable REDUCE_VE. Make TDX guest behaviour less odd, and closer to
how a normal CPU behaves.
Note that enabling of the feature doesn't eliminate need in #VE handler
for CPUID and MSR accesses. Some MSRs still generate #VE (notably
APIC-related) and kernel needs CPUID #VE handler to ask VMM for leafs in
hypervisor range.
[ dhansen: changelog tweaks, rename/rework VE reduction function ]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/all/20241202072431.447380-1-kirill.shutemov%40linux.intel.com
