Dan reported that in some cases the ret variable could be uninitialized. Fix
that by removing the out label entirely and returning zero explicitly on
succesful cases.
Also remove the unnecessary else branches to follow more the style used in
ath12k and now it's easier to see the error handling.
No functional changes.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/7e7afd00-ad84-4744-8d94-416bab7e7dd9@stanley.mountain/
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241126171139.2350704-10-kvalo@kernel.org
Currently for single radio devices (ah->num_radio == 1)
ath12k_mac_op_add_interface() creates vdev and later hw scan and
assign_vif_chanctx uses the same. For MLO, vdev create request should carry ML
address which will not be known during ath12k_mac_op_add_interface() as vif
will be marked as ML only after links are added to it.
If hw scan is requested, the vdev will be deleted post hw scan and subsequent
assign_vif_chanctx call will create new vdev with ML address. But in certain
cases assign_vif_chanctx could be called without any prior hw scan request and
reusing the previously created vdev causes a non-ML vdev to be used for an ML
vif and firmware operates the vdev in non-ML mode.
Fix this by deferring vdev creation for interface until hw scan or
assign_vif_chanctx request is received from mac80211.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241126171139.2350704-9-kvalo@kernel.org
Currently, the ath12k_bss_assoc() function handles only deflink station
connections. To support multi-link station connections, make the necessary
changes to retrieve the required information from the link-level members.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241126171139.2350704-8-kvalo@kernel.org
When a scan request is received, driver selects a link id for which the arvif
can be mapped. Same link is also used for getting the link conf address.
Currently, we return 0 as link id for a non ML vif, which is correct since that
is the default link id. Also when any of the link vif is active and the scan
request is for a channel in the active link we return its link id. But, when we
don't hit both of the above cases (i.e not a ML vif or no active link vif for
the channel is present) we currently return 0 as the link id.
Bu the problemis that this might not work out always, eg., when only one link
(eg. linkid = 1) is added to vif, then we won't find any link conf for link id
0 in the vif resulting in scan failure. During AP bringup, such scan failure
causes bringup issues. Hence avoid sending link id 0 as default. Rather use a
default link for scan and default link address for the same. This scan vdev
will either be deleted if another scan is requested on same vif or when AP is
broughtup on same link or during interface cleanup.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241126171139.2350704-7-kvalo@kernel.org
If peer creation fails ar->rx_stats needs to be freed in error handling.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241126171139.2350704-6-kvalo@kernel.org
Apply tid queue setup based on all link stations on receiving ampdu action
params for an ML Station.
Modify ath12k_get_ar_by_vif() to fetch ar based on link arvif inside ahvif.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241126171139.2350704-5-kvalo@kernel.org
Currently when tx flush is requested for an vif only packets corresponding to
deflink are flushed, with MLO multiple link arvif could be affiliated to the ML
vif and packets corresponding to all of them should be flushed.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com>
Signed-off-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241126171139.2350704-4-kvalo@kernel.org
For a frame transmission for an ML vif, mac80211 mentions transmit link id in
the tx control info. Use it to convert the RA/TA to the corresponding link sta
and link vif address before enqueueing the frame for transmission.
For 802.3 data frames, always enqueue the frame on the primary (assoc) link id.
Firmware does the link selection, builds 802.11 header and therefore the address
translation too.
Also ensure right link vif is used for WMI based management transmission and
add comments to document when RCU read lock is held.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241126171139.2350704-3-kvalo@kernel.org
To simplify locking for the next patches convert struct
ath12k::wmi_mgmt_tx_work to use wiphy_work. After this
ath12k_mgmt_over_wmi_tx_work() is called with wiphy_lock() taken. In
ath12k_core_suspend() we need to take wiphy_lock() because
ath12k_mac_wait_tx_complete() requires it.
Also add lockdep_assert_wiphy() to document when wiphy_lock() is held.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241126171139.2350704-2-kvalo@kernel.org
A recent rework on delay functions wrongly ended up calling __udelay()
instead of __ndelay() for nanosecond delays, increasing those by 1000.
As a result hangs have been observed on boot
Restore the right function calls.
Fixes: 19e2d91d8c ("delay: Rework udelay and ndelay")
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/all/20241121152931.51884-1-frederic@kernel.org
When Z60MR100 startup, speaker will output a pop. To fix this issue,
we mute codec by init verbs in bios when system startup, and set GPIO
to low to unmute codec in codec driver when it loaded .
[ white space fixes and compile warning fix by tiwai ]
Signed-off-by: bo liu <bo.liu@senarytech.com>
Link: https://patch.msgid.link/20241129014441.437205-1-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the legacy rawmidi has no proper way to know the inactive group,
indicate it in the rawmidi substream names with "[Inactive]" suffix
when the corresponding UMP group is inactive.
Link: https://patch.msgid.link/20241129094546.32119-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a UMP Group is inactive, we shouldn't allow users to access it
via the legacy MIDI access. Add the group active flag check and
return -ENODEV if it's inactive.
Link: https://patch.msgid.link/20241129094546.32119-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
update_port_infos() is called when a UMP FB Info update notification
is received, and this function is supposed to update the attributes of
the corresponding sequencer port. However, the function had a few
issues and it brought to the incorrect states. Namely:
- It tried to get a wrong sequencer info for the update without
correcting the port number with the group-offset 1
- The loop exited immediately when a sequencer port isn't present;
this ended up with the truncation if a sequencer port in the middle
goes away
This patch addresses those bugs.
Fixes: 4a16a3af05 ("ALSA: seq: ump: Handle FB info update")
Link: https://patch.msgid.link/20241128170423.23351-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There exists x86-based hardware with HiSilicon BMC chipsets. This
driver works well on these systems. Drop the dependency on ARM64.
Tested on RH1288 V3.
v2:
- s/Aarch86/ARM64 (Sui)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127133732.470414-1-tzimmermann@suse.de
When of_get_next_child_with_prefix() was added, the prefix argument was
left undocumented. This caused a new warning to be generated during the
kerneldoc build process:
drivers/of/base.c:661: warning: Function parameter or struct member 'prefix'
not described in 'of_get_next_child_with_prefix'
Properly document the argument to fix this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411280010.KGSDBOUE-lkp@intel.com/
Fixes: 1fcc67e3a3 ("of: base: Add for_each_child_of_node_with_prefix()")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The clock is in Hz while the value checked against is in kHz, so
actual frequencies will never be able to be below to max value.
Fix this by specifying the max-value in Hz too.
Fixes: 5a028e8f06 ("drm/rockchip: vop2: Add support for rk3588")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241115151131.416830-1-heiko@sntech.de
We are advertising experimental features through sysfs if
CONFIG_BTRFS_DEBUG is set, without looking if CONFIG_BTRFS_EXPERIMENTAL
is set. This is wrong as it will result in reporting experimental
features as supported when CONFIG_BTRFS_EXPERIMENTAL is not set but
CONFIG_BTRFS_DEBUG is set.
Fix this by checking for CONFIG_BTRFS_EXPERIMENTAL instead of
CONFIG_BTRFS_DEBUG.
Fixes: 67cd3f2217 ("btrfs: split out CONFIG_BTRFS_EXPERIMENTAL from CONFIG_BTRFS_DEBUG")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When running a workload with fsstress and duperemove (generic/561) we can
hit a deadlock related to transaction commits and locking extent ranges,
as described below.
Task A hanging during a transaction commit, waiting for all other writers
to complete:
[178317.334817] INFO: task fsstress:555623 blocked for more than 120 seconds.
[178317.335693] Not tainted 6.12.0-rc6-btrfs-next-179+ #1
[178317.336528] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[178317.337673] task:fsstress state:D stack:0 pid:555623 tgid:555623 ppid:555620 flags:0x00004002
[178317.337679] Call Trace:
[178317.337681] <TASK>
[178317.337685] __schedule+0x364/0xbe0
[178317.337691] schedule+0x26/0xa0
[178317.337695] btrfs_commit_transaction+0x5c5/0x1050 [btrfs]
[178317.337769] ? start_transaction+0xc4/0x800 [btrfs]
[178317.337815] ? __pfx_autoremove_wake_function+0x10/0x10
[178317.337819] btrfs_mksubvol+0x381/0x640 [btrfs]
[178317.337878] btrfs_mksnapshot+0x7a/0xb0 [btrfs]
[178317.337935] __btrfs_ioctl_snap_create+0x1bb/0x1d0 [btrfs]
[178317.337995] btrfs_ioctl_snap_create_v2+0x103/0x130 [btrfs]
[178317.338053] btrfs_ioctl+0x29b/0x2a90 [btrfs]
[178317.338118] ? kmem_cache_alloc_noprof+0x5f/0x2c0
[178317.338126] ? getname_flags+0x45/0x1f0
[178317.338133] ? _raw_spin_unlock+0x15/0x30
[178317.338145] ? __x64_sys_ioctl+0x88/0xc0
[178317.338149] __x64_sys_ioctl+0x88/0xc0
[178317.338152] do_syscall_64+0x4a/0x110
[178317.338160] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[178317.338190] RIP: 0033:0x7f13c28e271b
Which corresponds to line 2361 of transaction.c:
$ cat -n fs/btrfs/transaction.c
(...)
2162 int btrfs_commit_transaction(struct btrfs_trans_handle *trans)
2163 {
(...)
2349 spin_lock(&fs_info->trans_lock);
2350 add_pending_snapshot(trans);
2351 cur_trans->state = TRANS_STATE_COMMIT_DOING;
2352 spin_unlock(&fs_info->trans_lock);
2353
2354 /*
2355 * The thread has started/joined the transaction thus it holds the
2356 * lockdep map as a reader. It has to release it before acquiring the
2357 * lockdep map as a writer.
2358 */
2359 btrfs_lockdep_release(fs_info, btrfs_trans_num_writers);
2360 btrfs_might_wait_for_event(fs_info, btrfs_trans_num_writers);
2361 wait_event(cur_trans->writer_wait,
2362 atomic_read(&cur_trans->num_writers) == 1);
(...)
The transaction is in the TRANS_STATE_COMMIT_DOING state and so it's
waiting for all other existing writers to complete and release their
transaction handle.
Task B is running ordered extent completion and blocked waiting to lock an
extent range in an inode's io tree:
[178317.327411] INFO: task kworker/u48:8:554545 blocked for more than 120 seconds.
[178317.328630] Not tainted 6.12.0-rc6-btrfs-next-179+ #1
[178317.329635] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[178317.330872] task:kworker/u48:8 state:D stack:0 pid:554545 tgid:554545 ppid:2 flags:0x00004000
[178317.330878] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
[178317.330944] Call Trace:
[178317.330945] <TASK>
[178317.330947] __schedule+0x364/0xbe0
[178317.330952] schedule+0x26/0xa0
[178317.330955] __lock_extent+0x337/0x3a0 [btrfs]
[178317.331014] ? __pfx_autoremove_wake_function+0x10/0x10
[178317.331017] btrfs_finish_one_ordered+0x47a/0xaa0 [btrfs]
[178317.331074] ? psi_group_change+0x132/0x2d0
[178317.331078] btrfs_work_helper+0xbd/0x370 [btrfs]
[178317.331140] process_scheduled_works+0xd3/0x460
[178317.331144] ? __pfx_worker_thread+0x10/0x10
[178317.331146] worker_thread+0x121/0x250
[178317.331149] ? __pfx_worker_thread+0x10/0x10
[178317.331151] kthread+0xe9/0x120
[178317.331154] ? __pfx_kthread+0x10/0x10
[178317.331157] ret_from_fork+0x2d/0x50
[178317.331159] ? __pfx_kthread+0x10/0x10
[178317.331162] ret_from_fork_asm+0x1a/0x30
This extent range locking happens after joining the current transaction,
so task A is waiting for task B to release its transaction handle
(decrementing the transaction's num_writers counter).
Task C while doing a fiemap it tries to join the current transaction:
[242682.812815] task:pool state:D stack:0 pid:560767 tgid:560724 ppid:555622 flags:0x00004006
[242682.812827] Call Trace:
[242682.812856] <TASK>
[242682.812864] __schedule+0x364/0xbe0
[242682.812879] ? _raw_spin_unlock_irqrestore+0x23/0x40
[242682.812897] schedule+0x26/0xa0
[242682.812909] wait_current_trans+0xd6/0x130 [btrfs]
[242682.813148] ? __pfx_autoremove_wake_function+0x10/0x10
[242682.813162] start_transaction+0x3d4/0x800 [btrfs]
[242682.813399] btrfs_is_data_extent_shared+0xd2/0x440 [btrfs]
[242682.813723] fiemap_process_hole+0x2a2/0x300 [btrfs]
[242682.813995] extent_fiemap+0x9b8/0xb80 [btrfs]
[242682.814249] btrfs_fiemap+0x78/0xc0 [btrfs]
[242682.814501] do_vfs_ioctl+0x2db/0xa50
[242682.814519] __x64_sys_ioctl+0x6a/0xc0
[242682.814531] do_syscall_64+0x4a/0x110
[242682.814544] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[242682.814556] RIP: 0033:0x7efff595e71b
It tries to join the current transaction, but it can't because the
transaction is in the TRANS_STATE_COMMIT_DOING state, so
join_transaction() returns -EBUSY to start_transaction() and makes it
wait for the current transaction to complete. And while it's waiting
for the transaction to complete, it's holding an extent range locked
in the same inode that task B is operating, which causes a deadlock
between these 3 tasks. The extent range for the inode was locked at
the start of the fiemap operation, early at extent_fiemap().
In short these tasks deadlock because:
1) Task A is waiting for task B to release its transaction handle;
2) Task B is waiting to lock an extent range for an inode while holding a
transaction handle open;
3) Task C is waiting for the current transaction to complete (for task A
to finish the transaction commit) while holding the extent range for
the inode locked, so task B can't progress and release its transaction
handle.
This results in an ABBA deadlock involving transaction commits and extent
locks. Extent locks are higher level locks, like inode VFS locks, and
should always be acquired before joining or starting a transaction, but
recently commit 2206265f41 ("btrfs: remove code duplication in ordered
extent finishing") accidentally changed btrfs_finish_one_ordered() to do
the transaction join before locking the extent range.
Fix this by making sure that btrfs_finish_one_ordered() always locks the
extent before joining a transaction and add an explicit comment about the
need for this order.
Fixes: 2206265f41 ("btrfs: remove code duplication in ordered extent finishing")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
- Add trace flag for NEED_RESCHED_LAZY
Now that NEED_RESCHED_LAZY is upstream, add it to the status bits of the
common_flags. This will now show when the NEED_RESCHED_LAZY flag is set that
is used for debugging latency issues in the kernel via a trace.
- Remove leftover "__idx" variable when SRCU was removed from the tracepoint
code
- Add rcu_tasks_trace guard
To add a guard() around the tracepoint code, a rcu_tasks_trace guard needs
to be created first.
- Remove __DO_TRACE() macro and just call __DO_TRACE_CALL() directly
The DO_TRACE() macro has conditional locking depending on what was passed
into the macro parameters. As the guts of the macro has been moved to
__DO_TRACE_CALL() to handle static call logic, there's no reason to keep
the __DO_TRACE() macro around. It is better to just do the locking in
place without the conditionals and call __DO_TRACE_CALL() from those
locations. The "cond" passed in can also be moved out of that macro.
This simplifies the code.
- Remove the "cond" from the system call tracepoint macros
The "cond" variable was added to allow some tracepoints to check a
condition within the static_branch (jump/nop) logic. The system calls do
not need this. Removing it simplifies the code.
- Replace scoped_guard() with just guard() in the tracepoint logic
guard() works just as well as scoped_guard() in the tracepoint logic and
the scoped_guard() causes some issues.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ0dGmBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsZkAP9cm2psIGp2n1BgVjA+0tBRQJUnexEG
RualDkF5wAETLwD9FNFI/EUwDR/E8gNt0SY309EJZ1ijRiLjtU0spbQmdgs=
=awid
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing updates from Steven Rostedt:
- Add trace flag for NEED_RESCHED_LAZY
Now that NEED_RESCHED_LAZY is upstream, add it to the status bits of
the common_flags. This will now show when the NEED_RESCHED_LAZY flag
is set that is used for debugging latency issues in the kernel via a
trace.
- Remove leftover "__idx" variable when SRCU was removed from the
tracepoint code
- Add rcu_tasks_trace guard
To add a guard() around the tracepoint code, a rcu_tasks_trace guard
needs to be created first.
- Remove __DO_TRACE() macro and just call __DO_TRACE_CALL() directly
The DO_TRACE() macro has conditional locking depending on what was
passed into the macro parameters. As the guts of the macro has been
moved to __DO_TRACE_CALL() to handle static call logic, there's no
reason to keep the __DO_TRACE() macro around.
It is better to just do the locking in place without the conditionals
and call __DO_TRACE_CALL() from those locations. The "cond" passed in
can also be moved out of that macro. This simplifies the code.
- Remove the "cond" from the system call tracepoint macros
The "cond" variable was added to allow some tracepoints to check a
condition within the static_branch (jump/nop) logic. The system calls
do not need this. Removing it simplifies the code.
- Replace scoped_guard() with just guard() in the tracepoint logic
guard() works just as well as scoped_guard() in the tracepoint logic
and the scoped_guard() causes some issues.
* tag 'trace-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use guard() rather than scoped_guard()
tracing: Remove cond argument from __DECLARE_TRACE_SYSCALL
tracing: Remove conditional locking from __DO_TRACE()
rcupdate_trace: Define rcu_tasks_trace lock guard
tracing: Remove __idx variable from __DO_TRACE
tracing: Move it_func[0] comment to the relevant context
tracing: Record task flag NEED_RESCHED_LAZY.
Shinichiro reported the following use-after free that sometimes is
happening in our CI system when running fstests' btrfs/284 on a TCMU
runner device:
BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780
Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219
CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
? lock_release+0x708/0x780
print_report+0x174/0x505
? lock_release+0x708/0x780
? __virt_addr_valid+0x224/0x410
? lock_release+0x708/0x780
kasan_report+0xda/0x1b0
? lock_release+0x708/0x780
? __wake_up+0x44/0x60
lock_release+0x708/0x780
? __pfx_lock_release+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? lock_is_held_type+0x9a/0x110
_raw_spin_unlock_irqrestore+0x1f/0x60
__wake_up+0x44/0x60
btrfs_encoded_read_endio+0x14b/0x190 [btrfs]
btrfs_check_read_bio+0x8d9/0x1360 [btrfs]
? lock_release+0x1b0/0x780
? trace_lock_acquire+0x12f/0x1a0
? __pfx_btrfs_check_read_bio+0x10/0x10 [btrfs]
? process_one_work+0x7e3/0x1460
? lock_acquire+0x31/0xc0
? process_one_work+0x7e3/0x1460
process_one_work+0x85c/0x1460
? __pfx_process_one_work+0x10/0x10
? assign_work+0x16c/0x240
worker_thread+0x5e6/0xfc0
? __pfx_worker_thread+0x10/0x10
kthread+0x2c3/0x3a0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_encoded_read_regular_fill_pages+0x16c/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x4f/0x70
kfree+0x143/0x490
btrfs_encoded_read_regular_fill_pages+0x531/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff888106a83f00
which belongs to the cache kmalloc-rnd-07-96 of size 96
The buggy address is located 24 bytes inside of
freed 96-byte region [ffff888106a83f00, ffff888106a83f60)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888106a83800 pfn:0x106a83
flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
page_type: f5(slab)
raw: 0017ffffc0000000 ffff888100053680 ffffea0004917200 0000000000000004
raw: ffff888106a83800 0000000080200019 00000001f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888106a83e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a83e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>ffff888106a83f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888106a83f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a84000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Further analyzing the trace and the crash dump's vmcore file shows that
the wake_up() call in btrfs_encoded_read_endio() is calling wake_up() on
the wait_queue that is in the private data passed to the end_io handler.
Commit 4ff47df40447 ("btrfs: move priv off stack in
btrfs_encoded_read_regular_fill_pages()") moved 'struct
btrfs_encoded_read_private' off the stack.
Before that commit one can see a corruption of the private data when
analyzing the vmcore after a crash:
*(struct btrfs_encoded_read_private *)0xffff88815626eec8 = {
.wait = (wait_queue_head_t){
.lock = (spinlock_t){
.rlock = (struct raw_spinlock){
.raw_lock = (arch_spinlock_t){
.val = (atomic_t){
.counter = (int)-2005885696,
},
.locked = (u8)0,
.pending = (u8)157,
.locked_pending = (u16)40192,
.tail = (u16)34928,
},
.magic = (unsigned int)536325682,
.owner_cpu = (unsigned int)29,
.owner = (void *)__SCT__tp_func_btrfs_transaction_commit+0x0 = 0x0,
.dep_map = (struct lockdep_map){
.key = (struct lock_class_key *)0xffff8881575a3b6c,
.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
.name = (const char *)0xffff88815626f100 = "",
.wait_type_outer = (u8)37,
.wait_type_inner = (u8)178,
.lock_type = (u8)154,
},
},
.__padding = (u8 [24]){ 0, 157, 112, 136, 50, 174, 247, 31, 29 },
.dep_map = (struct lockdep_map){
.key = (struct lock_class_key *)0xffff8881575a3b6c,
.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
.name = (const char *)0xffff88815626f100 = "",
.wait_type_outer = (u8)37,
.wait_type_inner = (u8)178,
.lock_type = (u8)154,
},
},
.head = (struct list_head){
.next = (struct list_head *)0x112cca,
.prev = (struct list_head *)0x47,
},
},
.pending = (atomic_t){
.counter = (int)-1491499288,
},
.status = (blk_status_t)130,
}
Here we can see several indicators of in-memory data corruption, e.g. the
large negative atomic values of ->pending or
->wait->lock->rlock->raw_lock->val, as well as the bogus spinlock magic
0x1ff7ae32 (decimal 536325682 above) instead of 0xdead4ead or the bogus
pointer values for ->wait->head.
To fix this, change atomic_dec_return() to atomic_dec_and_test() to fix the
corruption, as atomic_dec_return() is defined as two instructions on
x86_64, whereas atomic_dec_and_test() is defined as a single atomic
operation. This can lead to a situation where counter value is already
decremented but the if statement in btrfs_encoded_read_endio() is not
completely processed, i.e. the 0 test has not completed. If another thread
continues executing btrfs_encoded_read_regular_fill_pages() the
atomic_dec_return() there can see an already updated ->pending counter and
continues by freeing the private data. Continuing in the endio handler the
test for 0 succeeds and the wait_queue is woken up, resulting in a
use-after-free.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Suggested-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Fixes: 1881fba89b ("btrfs: add BTRFS_IOC_ENCODED_READ ioctl")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter passed to load_mod() is stored in $MOD, but never used.
Obviously it was intended to be used instead of the hardcoded
"test_kallsyms_b" module name.
Fixes: 84b4a51fce ("selftests: add new kallsyms selftests")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Provide and clarify the existing ranges and what you should expect.
Fix the gen_test_kallsyms.sh script to accept different ranges.
Fixes: 84b4a51fce ("selftests: add new kallsyms selftests")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
- Update xe2 graphics name string (Matt Roper)
- Fix a couple of guc submit races (Matt Auld)
- Fix pat index usage in migrate (Matt Auld)
- Ensure non-cached migrate pagetable bo mappings (Matt Auld)
- Take a PM ref in the delayed snapshot capture worker (Matt Brost)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZ0iOGQAKCRC4FpNVCsYG
vzSmAP9w9xMhtf4SmQFrCXctd7iGm6cGuBg9ZMbJ/CY5dt/awgEAk+wVFr2SvbXl
wg1bGl8x4wPov3f6ro7tq2VO4Uaysg8=
=1ZRO
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-fixes-2024-11-28' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Update xe2 graphics name string (Matt Roper)
- Fix a couple of guc submit races (Matt Auld)
- Fix pat index usage in migrate (Matt Auld)
- Ensure non-cached migrate pagetable bo mappings (Matt Auld)
- Take a PM ref in the delayed snapshot capture worker (Matt Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z0iOjKwEGVo_DmgY@fedora
A few fairly minor driver specific fixes, plus one core fix for the
handling of deferred probe on ACPI systems - we ignoring probe deferral
and incorrectly treating it like a fatal error while parsing the generic
ACPI bindings for SPI devices.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdIdgMACgkQJNaLcl1U
h9BsXgf/SGFL0F1LrCCrsaWAZBg9maNijUI3bDqwt11cKMtyhxHMlbFM8x2CDQAG
HE3J39RBzKTIFYyGbflw8ogVSWwDiPv4S9W0LO2VfGXUtuN6PBIjNfBHbrskX55Y
5Dm470w+rW9GKz2dvTGqw9R1NdmgfpfMI/sffUsrpqSgHMkfB/vFfB9KhqQqRUpt
5fiy5KdZ0f9jz7huvnRULSS7yYl85xXHFKVMrBnQ6jVuAO8s5k16hDhxjY1TECpC
0uJ++WAE+nuVqUAdZ9zQQknV46JO6Vth+3dADvfTiKJGA2baUpn/9oZKms5OViDK
DkGnqlvgluSXEz4d92SzOd3VkrEmwQ==
=0oAO
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fairly minor driver specific fixes, plus one core fix for the
handling of deferred probe on ACPI systems - ignoring probe deferral
and incorrectly treating it like a fatal error while parsing the
generic ACPI bindings for SPI devices"
* tag 'spi-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix acpi deferred irq probe
spi: atmel-quadspi: Fix register name in verbose logging function
spi-imx: prevent overflow when estimating transfer time
spi: rockchip-sfc: Embedded DMA only support 4B aligned address
This allows killing processes that wait for a lock when one process is
stuck waiting for the NFS server. This aims to complete the coverage
of NFS operations being killable, like nfs_direct_wait() does, for
example.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Every pNFS SCSI IO wants to do LAYOUTGET, then within the layout find the
device which can drive GETDEVINFO, then finally may need to prep the device
with a reservation. This slow work makes a mess of IO latencies if one of
the later steps is going to fail for awhile.
If we're unable to register a SCSI device, ensure we mark the device as
unavailable so that it will timeout and be re-added via GETDEVINFO. This
avoids repeated doomed attempts to register a device in the IO path.
Add some clarifying comments as well.
Fixes: d869da91cc ("nfs/blocklayout: Fix premature PR key unregistration")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Since commit d869da91cc ("nfs/blocklayout: Fix premature PR key
unregistration") an unmount of a pNFS SCSI layout-enabled NFS may
dereference a NULL block_device in:
bl_unregister_scsi+0x16/0xe0 [blocklayoutdriver]
bl_free_device+0x70/0x80 [blocklayoutdriver]
bl_free_deviceid_node+0x12/0x30 [blocklayoutdriver]
nfs4_put_deviceid_node+0x60/0xc0 [nfsv4]
nfs4_deviceid_purge_client+0x132/0x190 [nfsv4]
unset_pnfs_layoutdriver+0x59/0x60 [nfsv4]
nfs4_destroy_server+0x36/0x70 [nfsv4]
nfs_free_server+0x23/0xe0 [nfs]
deactivate_locked_super+0x30/0xb0
cleanup_mnt+0xba/0x150
task_work_run+0x59/0x90
syscall_exit_to_user_mode+0x217/0x220
do_syscall_64+0x8e/0x160
This happens because even though we were able to create the
nfs4_deviceid_node, the lookup for the device was unable to attach the
block device to the pnfs_block_dev.
If we never found a block device to register, we can avoid this case with
the PNFS_BDEV_REGISTERED flag. Move the deref behind the test for the
flag.
Fixes: d869da91cc ("nfs/blocklayout: Fix premature PR key unregistration")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
BUG: KASAN: slab-use-after-free in tcp_write_timer_handler+0x156/0x3e0
Read of size 1 at addr ffff888111f322cd by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc4-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1
Call Trace:
<IRQ>
dump_stack_lvl+0x68/0xa0
print_address_description.constprop.0+0x2c/0x3d0
print_report+0xb4/0x270
kasan_report+0xbd/0xf0
tcp_write_timer_handler+0x156/0x3e0
tcp_write_timer+0x66/0x170
call_timer_fn+0xfb/0x1d0
__run_timers+0x3f8/0x480
run_timer_softirq+0x9b/0x100
handle_softirqs+0x153/0x390
__irq_exit_rcu+0x103/0x120
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x76/0x90
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:default_idle+0xf/0x20
Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90
90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 33 f8 25 00 fb f4 <fa> c3 cc cc cc
cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90
RSP: 0018:ffffffffa2007e28 EFLAGS: 00000242
RAX: 00000000000f3b31 RBX: 1ffffffff4400fc7 RCX: ffffffffa09c3196
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff9f00590f
RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed102360835d
R10: ffff88811b041aeb R11: 0000000000000001 R12: 0000000000000000
R13: ffffffffa202d7c0 R14: 0000000000000000 R15: 00000000000147d0
default_idle_call+0x6b/0xa0
cpuidle_idle_call+0x1af/0x1f0
do_idle+0xbc/0x130
cpu_startup_entry+0x33/0x40
rest_init+0x11f/0x210
start_kernel+0x39a/0x420
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0x97/0xa0
common_startup_64+0x13e/0x141
</TASK>
Allocated by task 595:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x87/0x90
kmem_cache_alloc_noprof+0x12b/0x3f0
copy_net_ns+0x94/0x380
create_new_namespaces+0x24c/0x500
unshare_nsproxy_namespaces+0x75/0xf0
ksys_unshare+0x24e/0x4f0
__x64_sys_unshare+0x1f/0x30
do_syscall_64+0x70/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 100:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x54/0x70
kmem_cache_free+0x156/0x5d0
cleanup_net+0x5d3/0x670
process_one_work+0x776/0xa90
worker_thread+0x2e2/0x560
kthread+0x1a8/0x1f0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
Reproduction script:
mkdir -p /mnt/nfsshare
mkdir -p /mnt/nfs/netns_1
mkfs.ext4 /dev/sdb
mount /dev/sdb /mnt/nfsshare
systemctl restart nfs-server
chmod 777 /mnt/nfsshare
exportfs -i -o rw,no_root_squash *:/mnt/nfsshare
ip netns add netns_1
ip link add name veth_1_peer type veth peer veth_1
ifconfig veth_1_peer 11.11.0.254 up
ip link set veth_1 netns netns_1
ip netns exec netns_1 ifconfig veth_1 11.11.0.1
ip netns exec netns_1 /root/iptables -A OUTPUT -d 11.11.0.254 -p tcp \
--tcp-flags FIN FIN -j DROP
(note: In my environment, a DESTROY_CLIENTID operation is always sent
immediately, breaking the nfs tcp connection.)
ip netns exec netns_1 timeout -s 9 300 mount -t nfs -o proto=tcp,vers=4.1 \
11.11.0.254:/mnt/nfsshare /mnt/nfs/netns_1
ip netns del netns_1
The reason here is that the tcp socket in netns_1 (nfs side) has been
shutdown and closed (done in xs_destroy), but the FIN message (with ack)
is discarded, and the nfsd side keeps sending retransmission messages.
As a result, when the tcp sock in netns_1 processes the received message,
it sends the message (FIN message) in the sending queue, and the tcp timer
is re-established. When the network namespace is deleted, the net structure
accessed by tcp's timer handler function causes problems.
To fix this problem, let's hold netns refcnt for the tcp kernel socket as
done in other modules. This is an ugly hack which can easily be backported
to earlier kernels. A proper fix which cleans up the interfaces will
follow, but may not be so easy to backport.
Fixes: 26abe14379 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We've noticed a situation where an unstable TCP connection can cause the
TLS handshake to timeout waiting for userspace to complete it. When this
happens, we don't want to return from xs_tls_handshake_sync() with zero, as
this will cause the upper xprt to be set CONNECTED, and subsequent attempts
to transmit will be returned with -EPIPE. The sunrpc machine does not
recover from this situation and will spin attempting to transmit.
The return value of tls_handshake_cancel() can be used to detect a race
with completion:
* tls_handshake_cancel - cancel a pending handshake
* Return values:
* %true - Uncompleted handshake request was canceled
* %false - Handshake request already completed or not found
If true, we do not want the upper xprt to be connected, so return
-ETIMEDOUT. If false, its possible the handshake request was lost and
that may be the reason for our timeout. Again we do not want the upper
xprt to be connected, so return -ETIMEDOUT.
Ensure that we alway return an error from xs_tls_handshake_sync() if we
call tls_handshake_cancel().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: 75eb6af7ac ("SUNRPC: Add a TCP-with-TLS RPC transport class")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Since transport->sock has been set to NULL during reset transport,
XPRT_SOCK_UPD_TIMEOUT also needs to be cleared. Otherwise, the
xs_tcp_set_socket_timeouts() may be triggered in xs_tcp_send_request()
to dereference the transport->sock that has been set to NULL.
Fixes: 7196dbb02e ("SUNRPC: Allow changing of the TCP timeout parameters on the fly")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When exporting only one file system with fsid=0 on the server side, the
client alternately uses the ro/rw mount options to perform the mount
operation, and a new vfsmount is generated each time.
It can be reproduced as follows:
[root@localhost ~]# mount /dev/sda /mnt2
[root@localhost ~]# echo "/mnt2 *(rw,no_root_squash,fsid=0)" >/etc/exports
[root@localhost ~]# systemctl restart nfs-server
[root@localhost ~]# mount -t nfs -o ro,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o rw,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o ro,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o rw,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount | grep nfs4
127.0.0.1:/ on /mnt/sdaa type nfs4 (ro,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (rw,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (ro,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (rw,relatime,vers=4.2,rsize=1048576,...
[root@localhost ~]#
We expected that after mounting with the ro option, using the rw option to
mount again would return EBUSY, but the actual situation was not the case.
As shown above, when mounting for the first time, a superblock with the ro
flag will be generated, and at the same time, in do_new_mount_fc -->
do_add_mount, it detects that the superblock corresponding to the current
target directory is inconsistent with the currently generated one
(path->mnt->mnt_sb != newmnt->mnt.mnt_sb), and a new vfsmount will be
generated.
When mounting with the rw option for the second time, since no matching
superblock can be found in the fs_supers list, a new superblock with the
rw flag will be generated again. The superblock in use (ro) is different
from the newly generated superblock (rw), and a new vfsmount will be
generated again.
When mounting with the ro option for the third time, the superblock (ro)
is found in fs_supers, the superblock in use (rw) is different from the
found superblock (ro), and a new vfsmount will be generated again.
We can switch between ro/rw through remount, and only one superblock needs
to be generated, thus avoiding the problem of repeated generation of
vfsmount caused by switching superblocks.
Furthermore, This can also resolve the issue described in the link.
Fixes: 275a5d24bf ("NFS: Error when mounting the same filesystem with different options")
Link: https://lore.kernel.org/all/20240604112636.236517-3-lilingfeng@huaweicloud.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
A couple of fixes that came in during the merge window, plus
documetation of a new device ID for the Qualcomm LABIBB driver. There's
a core fix for the rarely used current constraints and a fix for the
Qualcomm RPMH driver which had described only one of the two voltage
ranges that the hardware could control, creating a potential
incompatibility with the configuration left by firmware.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdIcWQACgkQJNaLcl1U
h9DfPAf/T/w7ZNWOR52sK8et3itHVVu3YSxB92fMz/CdesUgApi2Q6Py/gw1sduQ
mY6vUd3aLkTI1Qi+XifeoRKOdRud0GRcgVILdg0J/KgzJ7EXEJ4pxE+uLE6Etuop
TGD9CY/rsX92vk9aOSPBPXfNtYB8JfBH4EgJSmHYl3V3kNe1jA32IbGUOVahA+vW
r9M1M40fuE6AsvfX47oN2mird9HyRjTRwwtrMzR8pqq3AZ8CRpPhngaxVpotmGOZ
UEaJj83WXKtja9iezYTQYmhj9yfw/c7A4UdqUFjAeScRHYxl3U+kue8MpjND1DQZ
kQfsgFoYLN6CTBhnognp1oyovixztQ==
=Lhu/
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, plus
documetation of a new device ID for the Qualcomm LABIBB driver.
There's a core fix for the rarely used current constraints and a fix
for the Qualcomm RPMH driver which had described only one of the two
voltage ranges that the hardware could control, creating a potential
incompatibility with the configuration left by firmware"
* tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Ignore unset max_uA constraints in current limit check
dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator
regulator: qcom-rpmh: Update ranges for FTSMPS525
* power-supply core
- replace power_supply_register_no_ws() with power_supply_register() and a
new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
* power-supply drivers
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc. small cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAmdFLjIACgkQ2O7X88g7
+pqEKA//YiR8OHLOg+wAysQZmwpoOSKGA/P1PNYrlGE64DarHKGXGRgVs0Z+RjnC
FC4UKAYPz6h+dIWxuFjcoFmgiB8ewkFEB7Kgys6d9E2pL/Z7k5pteoAT7aiKnF+A
OcNPsXt18Nj4wUF1va45zc4wUEtbwNoFUpiofCNv2f3SO79ZxHmm0fRScBCHLgAt
lfiV6Yp1bx8aJ6Z/lgpzz6ofmBVLKNTrzbrJ8c9gYFSNxeQxGPk9nWawhy8bJaHR
olIcO+XVacRZ8P0D1XtJNgJCzPvl4Qo2fPej5PXKzzQTM1a56b9bFCR0/TSqzYAw
PLceJQIxttvBZfUVUmS/+ur8R/cc4OoXGs5xILIW3CfXTljdPVxOvx+Y4ztiEQLx
72uPyT+cmlFEO4NvKK1JkypKfuS589vc4byrIrWquuPU3FPwgEbbYoFLpuBcKBq8
EKu7LuF5gIR1WxwhNYWivJRQUjGlcRuF8bglaB0o8S4+eB93Hq7Uhchqew/n3ofp
Qm/YFtCpAjyHoDhTOWH8KvuSEmO/QVz74ffQQw/NuxT7/ul7cEsksN+uolGLt/z/
fGFj8W+ki1rdQWpFG1epzINSHv6spf9qu2JLAFoHMJlyxjXTLC7s6BVNe41rLNwD
lGjUlsxIQ9b86tlh4qX1qpDqyKhbJzN6WGGWGmFLubFsjr39O30=
=vpkz
-----END PGP SIGNATURE-----
Merge tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- replace power_supply_register_no_ws() with power_supply_register()
and a new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
Power-supply drivers:
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc small cleanups and fixes"
* tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
power: reset: ep93xx: add AUXILIARY_BUS dependency
dt-bindings: power: reset: Convert mode-.* properties to array
power: supply: sc27xx: Fix battery detect GPIO probe
dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio
reset: keystone-reset: remove unused macros
power: supply: axp20x_battery: Use scaled iio_read_channel
power: supply: axp20x_usb_power: Use scaled iio_read_channel
power: supply: generic-adc-battery: change my gmail
power: supply: pmu_battery: Set power supply type to BATTERY
power: Switch back to struct platform_driver::remove()
power: supply: hwmon: move interface to private header
power: supply: rk817: Update battery capacity calibration
power: supply: rk817: stop updating info in suspend
power: supply: rt9471: Use IC status regfield to report real charger status
power: supply: rt9471: Fix wrong WDT function regfield declaration
dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example
power: supply: core: mark attribute arrays as ro_after_init
power: supply: core: unexport power_supply_property_is_writeable()
power: supply: core: use device mutex wrappers
power: supply: bq27xxx: Fix registers of bq27426
...
Fixed:
additional checks have been added to address issues identified by syzbot.
Refactored:
continuation of the transition from 'page' to 'folio'.
-----BEGIN PGP SIGNATURE-----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=xhIC
-----END PGP SIGNATURE-----
Merge tag 'ntfs3_for_6.13' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
- additional checks to address issues identified by syzbot
- continuation of the transition from 'page' to 'folio'
* tag 'ntfs3_for_6.13' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Accumulated refactoring changes
fs/ntfs3: Switch to folio to release resources
fs/ntfs3: Add check in ntfs_extend_initialized_size
fs/ntfs3: Add more checks in mi_enum_attr (part 2)
fs/ntfs3: Equivalent transition from page to folio
fs/ntfs3: Fix case when unmarked clusters intersect with zone
fs/ntfs3: Fix warning in ni_fiemap
- Handle it as the empty directory if the start cluster of stream entry
is invalid.
- Valid size of steam entry cannot be greater than data size.
If valid_size is invalid, Deal with data_size.
- Move Direct-IO alignment check to before extending the valid size.
- Fix uninit-value issue reported by syzbot.
- Optimize to find directory entry-set in write_inode, rename, unlink.
-----BEGIN PGP SIGNATURE-----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=1uEv
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- If the start cluster of stream entry is invalid, treat it as the
empty directory
- Valid size of steam entry cannot be greater than data size. If
valid_size is invalid, use data_size
- Move Direct-IO alignment check to before extending the valid size
- Fix uninit-value issue reported by syzbot
- Optimize finding directory entry-set in write_inode, rename, unlink
* tag 'exfat-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: reduce FAT chain traversal
exfat: code cleanup for exfat_readdir()
exfat: remove argument 'p_dir' from exfat_add_entry()
exfat: move exfat_chain_set() out of __exfat_resolve_path()
exfat: add exfat_get_dentry_set_by_ei() helper
exfat: rename argument name for exfat_move_file and exfat_rename_file
exfat: remove unnecessary read entry in __exfat_rename()
exfat: fix file being changed by unaligned direct write
exfat: fix uninit-value in __exfat_get_dentry_set
exfat: fix out-of-bounds access of directory entries
We determine the "spec" eDP power sequencing delays
by referencing some max values from the eDP spec.
Write out each number from the spec explicitly instead
of precomputing the final number (that's the job of
the computer). Makes it a bit easier to see what the
supposed spec defined numbers actually are.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106215859.25446-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reuse struct intel_pps_delays for the LVDS power
sequencing delays instead of hand rolling it all.
Perhaps in the future we could reuse some of the
same PPS code for both LVDS and eDP (assuming we
can decouple the PPS code from intel_dp...).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106215859.25446-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Stop using the semi-random eDP spec T1,T3,... names for the
power sequencing delays, and instead call them by their human
readable names. Much easier to keep track what delay goes
where when you don't have to constantly cross reference against
the eDP spec.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106215859.25446-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We currently lack a proper struct definition for the VBT power
squencing delays, and instead we use the same struct definition
(in intel_bios.h) for both the VBT layout and our driver side
state. Decouple those two things by moving the current struct
into intel_vbt_defs.h and adding a new one for the driver's use.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106215859.25446-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The code initializing the power sequencing delays is a bit
hard to follow. One confusing thing is that we keep doing the
+/-1 adjustment for the hardware register value in several places.
Simplify this a bit by doing the adjustment only when reading or
writing the actual register.
This also matches how the LVDS code does things.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106215859.25446-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
