Add changes to add the link vdevs dynamically whenever a channel is assigned
from mac80211 for a link vdev. During vdev create, update ML address of the
vdev to firmware using the new WMI parameter (WMI_TAG_MLO_VDEV_CREATE_PARAMS).
During vdev start, notify the firmware that this link vdev is newly added and
also indicate all its known partners so that the firmware can take necessary
actions to internally update the partners on the new link being added.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241101151705.165987-3-kvalo@kernel.org
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
In commit 477cabfdb7 ("wifi: ath12k: modify link arvif creation and removal
for MLO") I had accidentally left one personal TODO comment about using goto
instead of ret. Switch to use goto to be consistent with the error handling in
the function.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241101151705.165987-2-kvalo@kernel.org
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
As described in [1], compiling the ath12k driver using clang with
KASAN enabled warns about some functions with excessive stack usage,
with the worst case being:
drivers/net/wireless/ath/ath12k/qmi.c:3546:13: warning: stack frame size (2456) exceeds limit (1024) in 'ath12k_qmi_driver_event_work' [-Wframe-larger-than]
Nathan [2] highlighted work done by Arnd [3] to address similar
issues in other portions of the kernel.
ath12k_qmi_driver_event_work() itself is a pretty lightweight
function, but it dispatches to several other functions which do the
real work:
ath12k_qmi_driver_event_work()
ath12k_qmi_event_server_arrive()
ath12k_qmi_host_cap_send()
ath12k_qmi_event_mem_request()
ath12k_qmi_respond_fw_mem_request()
ath12k_qmi_event_load_bdf()
ath12k_qmi_request_target_cap()
ath12k_qmi_load_bdf_qmi()
ath12k_qmi_wlanfw_m3_info_send()
Mark all of those underlying functions as 'noinline_for_stack' to
prevent them from being inlined in ath12k_qmi_driver_event_work(),
thereby eliminating the excessive stack usage.
Link: https://msgid.link/bc214795-1c51-4cb7-922f-67d6ef98bff2@quicinc.com # [1]
Link: https://msgid.link/20241025223321.GA3647469@thelio-3990X # [2]
Link: https://lore.kernel.org/all/?q=f:arnd@kernel.org+Wframe-larger-than # [3]
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241028-ath12k_qmi_driver_event_work-v1-1-0d532eb593fa@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
During rmmod, the ath11k host driver sends a QMI MODE OFF command
to firmware.
As part of this command, firmware initiates WLAN de-initialization
and accesses certain UMAC registers during this process.
Currently, on WCN6750 WLAN hardware, the system is in a sleep state when
firmware receives the QMI MODE OFF command.
This results in a firmware/hardware reset while accessing the UMAC hardware
registers during sleep state.
To avoid this, add logic to send WCN6750 hardware specific
WMI_PDEV_SUSPEND_AND_DISABLE_INTR command to firmware prior to sending
the QMI MODE OFF command.
This will cause firmware to cease all activities and put the device in
a powered-on state that prevents access to registers which have been
powered off.
Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241029083340.3010798-1-quic_bpothuno@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Couple of fixes for keys and trusted keys. For me it id not make
(common) sense to separate them into separate them into separate keys
and trusted keys PR's.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCZyu2GQAKCRAaerohdGur
0nIUAP4xhqSTeJb1oYX5wvHtDhXGH4EEI/PQtq/zS5yEoAYmqQD/TuW6UU9I4vmd
U+v6gEL0kLojM43PumHBuzQdF8RHkgA=
=4C6c
-----END PGP SIGNATURE-----
Merge tag 'keys-next-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys fixes from Jarkko Sakkinen:
"A couple of fixes for keys and trusted keys"
* tag 'keys-next-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation
security/keys: fix slab-out-of-bounds in key_task_permission
A memleak was found as below:
unreferenced object 0xffff0000d10164d8 (size 8):
comm "pool-udisksd", pid 108217, jiffies 4295408555
hex dump (first 8 bytes):
75 74 66 38 00 cc cc cc utf8....
backtrace (crc de430d31):
[<ffff800081046e6c>] kmemleak_alloc+0xb8/0xc8
[<ffff8000803e6c3c>] __kmalloc_node_track_caller_noprof+0x380/0x474
[<ffff800080363b74>] kstrdup+0x70/0xfc
[<ffff80007bb3c6a4>] isofs_parse_param+0x228/0x2c0 [isofs]
[<ffff8000804d7f68>] vfs_parse_fs_param+0xf4/0x164
[<ffff8000804d8064>] vfs_parse_fs_string+0x8c/0xd4
[<ffff8000804d815c>] vfs_parse_monolithic_sep+0xb0/0xfc
[<ffff8000804d81d8>] generic_parse_monolithic+0x30/0x3c
[<ffff8000804d8bfc>] parse_monolithic_mount_data+0x40/0x4c
[<ffff8000804b6a64>] path_mount+0x6c4/0x9ec
[<ffff8000804b6e38>] do_mount+0xac/0xc4
[<ffff8000804b7494>] __arm64_sys_mount+0x16c/0x2b0
[<ffff80008002b8dc>] invoke_syscall+0x7c/0x104
[<ffff80008002ba44>] el0_svc_common.constprop.1+0xe0/0x104
[<ffff80008002ba94>] do_el0_svc+0x2c/0x38
[<ffff800081041108>] el0_svc+0x3c/0x1b8
The opt->iocharset is freed inside the isofs_fill_super function,
But there may be situations where it's not possible to
enter this function.
For example, in the get_tree_bdev_flags function,when
encountering the situation where "Can't mount, would change RO state,"
In such a case, isofs_fill_super will not have the opportunity
to be called,which means that opt->iocharset will not have the chance
to be freed,ultimately leading to a memory leak.
Let's move the memory freeing of opt->iocharset into
isofs_free_fc function.
Fixes: 1b17a46c92 ("isofs: convert isofs to use the new mount API")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241106082841.51773-1-hao.ge@linux.dev
As the introduction of the support for vsock and unix sockets in sockmap,
tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK.
vsock and af_unix sockets have vsock_sock and unix_sock instead of
inet_connection_sock. For these sockets, tls_get_ctx may return an invalid
pointer and cause page fault in function tls_sw_ctx_rx.
BUG: unable to handle page fault for address: 0000000000040030
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:sk_psock_strp_data_ready+0x23/0x60
Call Trace:
? __die+0x81/0xc3
? no_context+0x194/0x350
? do_page_fault+0x30/0x110
? async_page_fault+0x3e/0x50
? sk_psock_strp_data_ready+0x23/0x60
virtio_transport_recv_pkt+0x750/0x800
? update_load_avg+0x7e/0x620
vsock_loopback_work+0xd0/0x100
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? __kthread_cancel_work+0x40/0x40
ret_from_fork+0x1f/0x40
v2:
- Add IS_ICSK check
v3:
- Update the commits in Fixes
Fixes: 634f1a7110 ("vsock: support sockmap")
Fixes: 94531cfcbe ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20241106003742.399240-1-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The commit 78ff640819 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility.
It is ignored when it is set. Fix the code so that it recognises the
option again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZyuidRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsgQAQDuV0x4RLpCrrowDS/ITQw/eb/WjhR7
lhkXVROLN6RK6wD+JWmbaCP82q2S4A2Vx0Rjc72gUMmTzDb1HQflhQiLhwU=
=0dZF
-----END PGP SIGNATURE-----
Merge tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs fixes from Steven Rostedt:
"Fix tracefs mount options.
Commit 78ff640819 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility. It is
ignored when it is set. Fix the code so that it recognises the option
again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future"
* tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/selftests: Add tracefs mount options test
tracing: Document tracefs gid mount option
tracing: Fix tracefs mount options
Highlights:
- AMD PMF: Add new hardware id
- AMD PMC: Fix crash when loaded with enable_stb=1 on devices without STB
- Dell: Add Alienware hwid for Alienware systems with Dell WMI interface
- thinkpad_acpi: Quirk to fix wrong fan speed readings on L480
- New hotkey mappings for Dell and Lenovo laptops
The following is an automated git shortlog grouped by driver:
dell-smbios-base:
- Extends support to Alienware products
dell-wmi-base:
- Handle META key Lock/Unlock events
ideapad-laptop:
- add missing Ideapad Pro 5 fn keys
platform/x86/amd/pmc:
- Detect when STB is not available
platform/x86/amd/pmf:
- Add SMU metrics table support for 1Ah family 60h model
thinkpad_acpi:
- Fix for ThinkPad's with ECFW showing incorrect fan speed
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmcrWl8UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yMAAf/S1jCHG5TzIUN4ChncXGEC6vkVJ9t
C9eqErGqx0Dm3VUa5e6geZzpDoD37AaLP7K/C6lAxxYSpYd/VYYIcqMihtIcYsTp
SRuWWT5qDq3xhGXd1bbe5PU92BQ7vbkoOxvWbRCpHNjaI5xKaRUnxycCAqJaqo5E
835tx3urhiMRucT0YUtmJoiclfGkIvBfjHFemC7dCAOmpqWAJxe4MFb0HXTyw6ja
GIcTmzxZpLNGmiiB4DWRs0EyjCfcFE/xJeny14/j36XfMu82vv8dAHIwA0FiaA3e
Jq0eoWqRfZfaTmkcYY64C2QX1WYEc+ANHmUhOGNyY+Zyt1EuoaYWYsLgXg==
=1cZL
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- AMD PMF: Add new hardware id
- AMD PMC: Fix crash when loaded with enable_stb=1 on devices without STB
- Dell: Add Alienware hwid for Alienware systems with Dell WMI interface
- thinkpad_acpi: Quirk to fix wrong fan speed readings on L480
- New hotkey mappings for Dell and Lenovo laptops
* tag 'platform-drivers-x86-v6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix for ThinkPad's with ECFW showing incorrect fan speed
platform/x86: ideapad-laptop: add missing Ideapad Pro 5 fn keys
platform/x86: dell-wmi-base: Handle META key Lock/Unlock events
platform/x86: dell-smbios-base: Extends support to Alienware products
platform/x86/amd/pmc: Detect when STB is not available
platform/x86/amd/pmf: Add SMU metrics table support for 1Ah family 60h model
Curretly in function generic_listxattr the for_each_xattr_handler loop
checks err and will return out of the function if err is non-zero.
It's impossible for err to be non-zero at the end of the function where
err is checked again for a non-zero value. The final non-zero check is
therefore redundant and can be removed. Also move the declaration of
err into the loop.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
switch path_removexattrat() and fremovexattr(2) to those
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
switch path_listxattr() and flistxattr(2) to those
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
similar to do_setxattr() in the previous commit...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
io_uring setxattr logics duplicates stuff from fs/xattr.c; provide
saner helpers (filename_setxattr() and file_setxattr() resp.) and
use them.
NB: putname(ERR_PTR()) is a no-op
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the struct xattr_ctx to increase distinction with the about to be
added user API struct xattr_args.
No functional change.
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Link: https://lore.kernel.org/r/20240426162042.191916-2-cgoettsche@seltendoof.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- fix restart/panic logic in dm-verity
- fix 32-bit unsigned integer overflow in dm-unstriped
- fix a device mapper crash if blk_alloc_disk fails
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRnH8MwLyZDhyYfesYTAyx9YGnhbQUCZyj5MhQcbXBhdG9ja2FA
cmVkaGF0LmNvbQAKCRATAyx9YGnhbSpeAQCcyhjrFxvFQuTJm/nv65Txwqw3+nvu
i45pJ1DbK1awEQD/W0xUhhWrHfXwnb2dHV/mowLSnlou7uUh/JUx9q24OQg=
=5qjV
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- fix memory safety bugs in dm-cache
- fix restart/panic logic in dm-verity
- fix 32-bit unsigned integer overflow in dm-unstriped
- fix a device mapper crash if blk_alloc_disk fails
* tag 'for-6.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: fix potential out-of-bounds access on the first resume
dm cache: optimize dirty bit checking with find_next_bit when resizing
dm cache: fix out-of-bounds access to the dirty bitset when resizing
dm cache: fix flushing uninitialized delayed_work on cache_ctr error
dm cache: correct the number of origin blocks to match the target length
dm-verity: don't crash if panic_on_corruption is not selected
dm-unstriped: cast an operand to sector_t to prevent potential uint32_t overflow
dm: fix a crash if blk_alloc_disk fails
Not active for a long time, so remove myself from MAINTAINERS.
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Zefan Li <lizf.kern@gmail.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add `select RMI4_F3A` under `HID_RMI` in Kconfig to support buttons and GPIOs
on newer Synaptics HID RMI devices. Future devices will use F3A instead of F30,
but F30 is still selected for backward compatibility.
Signed-off-by: Vincent Huang <vincenth@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There are apparently incomplete clones of the HXD type chip in use.
Those return -EPIPE on GET_LINE_REQUEST and BREAK_REQUEST. Avoid
flooding the kernel log with those errors. Detect them during startup
and then use the line_settings cache instead of GET_LINE_REQUEST. Signal
missing break support via -ENOTTY.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[ johan: fix macro prefix, drop oom error message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Cleanup kprobes on ftrace code for x86.
- Set instruction pointer (ip + MCOUNT_INSN_SIZE) after pre_handler only
when p->post_handler exists.
- Use INT3_INSN_SIZE instead of 1.
- Use instruction_pointer/instruction_pointer_set() functions instead of
accessing regs->ip directly.
Link: https://lore.kernel.org/all/172951436219.167263.18330240454389154327.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
On ADLP+ during modeset enabling and disabling, enable and disable the DP2
configuration for MST slave transcoders as required by the specification.
Update the documentation of intel_ddi_config_transcoder_func() /
intel_ddi_disable_transcoder_func() based on the above. While at it also
clarify the programming steps of these functions specific to transcoder
types.
v2:
- Enable/disable the DP2 config from
intel_ddi_config_transcoder_func()/intel_ddi_disable_transcoder_func().
(Jani)
- Handle all ADLP+ platforms in one patch, instead of doing that
separately wrt. PTL.
Bspec: 55424, 54128, 65448, 68849
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030192313.4030617-5-imre.deak@intel.com
Add a way to disable the DP2 configuration, required by the next patch
during transcoder disabling.
While at it drop the redundant encoder parameter.
v2:
- Keep intel_ddi_config_transcoder_dp2() static. (Jani)
- Remove the encoder parameter.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030192313.4030617-4-imre.deak@intel.com
On ADLP+ during modeset enabling configure the DDI function without
enabling it for MST slave transcoders before programming the data and
link M/N values. The DDI function gets enabled separately later in the
transcoder enabling sequence.
Align the code with the spec based on the above.
v2: Move this patch earlier in the series, addressing the DP2
config fixes for all ADLP+ platforms later.
Bspec: 55424, 54128, 65448, 68849
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030192313.4030617-3-imre.deak@intel.com
On PTL during modeset enabling configure the DDI function without
enabling it for MST slave transcoders before programming the data and
link M/N values. The DDI function gets enabled separately later in the
transcoder enabling sequence.
This fixes a slave transcoder getting stuck during enabling, leading
to page flip timeout errors on the corresponding pipe.
The spec requires the same programming step for ADLP+ platforms, that
will be addressed separately (on those platforms the above transcoder
getting stuck issue was not observed).
Bspec: 68849
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030192313.4030617-2-imre.deak@intel.com
Describe the most conservative version of the driver implementations.
All drivers should support this.
Many drivers support extending the range if a large page is hit, but
let's not make that officially approved API. The main point is to
document explicitly that split is not supported.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v3-b3a5b5937f56+7bb-arm_no_split_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
A minority of page table implementations (arm_lpae, armv7) are unique in
how they handle partial unmap of large IOPTEs.
Other implementations will unmap the large IOPTE and return it's
length. For example if a 2M IOPTE is present and the first 4K is requested
to be unmapped then unmap will remove the whole 2M and report 2M as the
result.
armv7 instead will break up contiguous entries and replace an entry with a
whole table so it can unmap the requested 4k.
This seems copied from the arm_lpae implementation, which was analyzed
here:
https://lore.kernel.org/all/20241024134411.GA6956@nvidia.com/
Bring consistency to the implementations and remove this unused
functionality.
There are no uses outside iommu, this effects the ARM_V7S drivers
msm_iommu, mtk_iommu, and arm-smmmu.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v3-b3a5b5937f56+7bb-arm_no_split_jgg@nvidia.com
[will: Remove unused 'loopnr' variable]
Signed-off-by: Will Deacon <will@kernel.org>
Rearrange lookup of recommended OPP for the Mali GPU device and its refcnt
decremental to make sure no OPP object leaks happen in the error path.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: fac9b22df4 ("drm/panthor: Add the devfreq logical block")
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105205458.1318989-2-adrian.larumbe@collabora.com
Commit f11b0417ee ("drm/panfrost: Add fdinfo support GPU load metrics")
retrieves the OPP for the maximum device clock frequency, but forgets to
keep the reference count balanced by putting the returned OPP object. This
eventually leads to an OPP core warning when removing the device.
Fix it by putting OPP objects as many times as they're retrieved.
Also remove an unnecessary whitespace.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: f11b0417ee ("drm/panfrost: Add fdinfo support GPU load metrics")
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105205458.1318989-1-adrian.larumbe@collabora.com
A minority of page table implementations (arm_lpae, armv7) are unique in
how they handle partial unmap of large IOPTEs.
Other implementations will unmap the large IOPTE and return it's
length. For example if a 2M IOPTE is present and the first 4K is requested
to be unmapped then unmap will remove the whole 2M and report 2M as the
result.
arm_lpae instead replaces the IOPTE with a table of smaller IOPTEs, unmaps
the 4K and returns 4k. This is actually an illegal/non-hitless operation
on at least SMMUv3 because of the BBM level 0 rules.
Will says this was done to support VFIO, but upon deeper analysis this was
never strictly necessary:
https://lore.kernel.org/all/20241024134411.GA6956@nvidia.com/
In summary, historical VFIO supported the AMD behavior of unmapping the
whole large IOPTE and returning the size, even if asked to unmap a
portion. The driver would see this as a request to split a large IOPTE.
Modern VFIO always unmaps entire large IOPTEs (except on AMD) and drivers
don't see an IOPTE split.
Given it doesn't work fully correctly on SMMUv3 and relying on ARM unique
behavior would create portability problems across IOMMU drivers, retire
this functionality.
Outside the iommu users, this will potentially effect io_pgtable users of
ARM_32_LPAE_S1, ARM_32_LPAE_S2, ARM_64_LPAE_S1, ARM_64_LPAE_S2, and
ARM_MALI_LPAE formats.
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-b3a5b5937f56+7bb-arm_no_split_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The tilt data contained in the Bluetooth packets of an Intuos Pro are
supposed to be interpreted as signed values. Simply casting the values
to type `char` is not guaranteed to work since it is implementation-
defined whether it is signed or unsigned. At least one user has noticed
the data being reported incorrectly on their system. To ensure that the
data is interpreted properly, we specifically cast to `signed char`
instead.
Link: https://github.com/linuxwacom/input-wacom/issues/445
Fixes: 4922cd26f0 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
CC: stable@vger.kernel.org # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Pull MD changes from Song:
"1. Enhance handling of faulty and blocked devices, by Yu Kuai.
2. raid5-ppl atomic improvement, by Uros Bizjak.
3. md-bitmap fix, by Yuan Can."
* tag 'md-6.13-20241105' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/md-bitmap: Add missing destroy_work_on_stack()
md/raid5: don't set Faulty rdev for blocked_rdev
md/raid10: don't wait for Faulty rdev in wait_blocked_rdev()
md/raid1: don't wait for Faulty rdev in wait_blocked_rdev()
md/raid1: factor out helper to handle blocked rdev from raid1_write_request()
md: don't record new badblocks for faulty rdev
md: don't wait faulty rdev in md_wait_for_blocked_rdev()
md: add a new helper rdev_blocked()
md/raid5-ppl: Use atomic64_inc_return() in ppl_new_iounit()
pcim_iomap_table() and pcim_request_regions() have been deprecated in
commit e354bb84a4 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()") and commit d140f80f60 ("PCI:
Deprecate pcim_iomap_regions() in favor of pcim_iomap_region()"),
respectively.
Replace these functions with pcim_iomap_region().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20241106145249.108996-2-pstanner@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the system boots with MBUS joining enabled but we disable
the relevant pipe during sanitation we later get into trouble
as the rest of the code doesn't expect MBUS joining to be
enabled unless the set of active pipes is in agreement.
We could relax some of the MBUS joining related checks during
normal atomic commits to let this slide, but that might also
let some real bugs through. So let's sanitize the MBUS joining
instead. And in order to keep things more or less in sync we'll
do the related credit, cdclk/mdclk ratio, etc. updates as well.
We'll stick to sturct drm_i915_private for now (instead of
struct intel_display) since the rest of the skl wm code does the
same, and we might need to bakport this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031155646.15165-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We'll be wanting to reprogram the MBUS_CTL register during an
upcoming MBUS sanitation stage. Extract the reprogramming
into a helper that doesn't depend on the full atomic state
so that it can be reused.
We'll stick to sturct drm_i915_private for now (instead of
struct intel_display) since the rest of the skl wm code does the
same, and we might need to bakport this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031155646.15165-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We'll be wanting to reprogram the PIPE_MBUS_DBOX_CTL registers
during an upcoming MBUS sanitation stage. Extract the reprogramming
loop into a helper that doesn't depend on the full atomic state
so that it can be reused.
We'll stick to sturct drm_i915_private for now (instead of
struct intel_display) since the rest of the skl wm code does the
same, and we might need to bakport this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031155646.15165-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We'll be wanting to reprogram the PIPE_MBUS_DBOX_CTL registers
during an upcoming MBUS sanitation stage. To make that easier
extract a helper that computes the full register value for us.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031155646.15165-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
In order to add more MBUS sanitation into the code we'll want
to reuse a bunch of the code that performs the MBUS/related
hardware programming. Currently that code comes after the
main skl_wm_get_hw_state_and_sanitize() entrypoint. In order
to avoid annoying forward declarations relocate the
skl_wm_get_hw_state_and_sanitize() and related stuff nearer to
the end of the file.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031155646.15165-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
If another VF migration happened during post-migration recovery,
then the current worker should be finished to allow the next
one start swiftly and cleanly.
Check for defer in two places: before fixups, and before
sending RESFIX_DONE.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-6-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
During post-migration recovery, only MMIO communication to GuC is
allowed. The VF KMD needs to use that channel to ask for the new
provisioning, which includes a new GGTT range assigned to the VF.
v2: query config only instead of handshake; no need to get pm ref as
it's now kept through whole recovery (Michal)
v3: switched names of 'err' and 'ret' (Michal)
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-5-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
After restore, GuC will not answer to any messages from VF KMD until
fixups are applied. When that is done, VF KMD sends RESFIX_DONE
message to GuC, at which point GuC resumes normal operation.
This patch implements sending the RESFIX_DONE message at end of
post-migration recovery.
v2: keep pm ref during whole recovery, style fixes (Michal)
v3: assert removal to separate patch, debug message per GuC instead
of one, comments changes (Michal)
v4: improve one debug message (Michal)
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-4-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
This adds a documentation chapter, containing high level flow
of VF restore procedure.
v2: Better describe initial conditions, include GuC states on
sequence diagram (Michal)
v3: moved DOC to .c (Michal)
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-3-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Xiaomi Book Pro 14 2022 (MIA2210-AD) requires a quirk entry for its
internal microphone to be enabled.
This is likely due to similar reasons as seen previously on Redmi Book
14/15 Pro 2022 models (since they likely came with similar firmware):
- commit dcff8b7ca9 ("ASoC: amd: yc: Add Xiaomi Redmi Book Pro 15 2022
into DMI table")
- commit c1dd6bf619 ("ASoC: amd: yc: Add Xiaomi Redmi Book Pro 14 2022
into DMI table")
A quirk would likely be needed for Xiaomi Book Pro 15 2022 models, too.
However, I do not have such device on hand so I will leave it for now.
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://patch.msgid.link/20241106024052.15748-1-jeffbai@aosc.io
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit a38eaa07a0 ("m68k/mvme147: config.c - Remove unused
functions"), removed the console functionality for the mvme147 instead
of wiring it up to an early console. Put the console write function
back and wire it up like mvme16x does so it's possible to see Linux boot
on this fine hardware once more.
Fixes: a38eaa07a0 ("m68k/mvme147: config.c - Remove unused functions")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Co-developed-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/a82e8f0068a8722996a0ccfe666abb5e0a5c120d.1730850684.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
MAX98390 is a smart amplifier and exposes one DAI, so '#sound-dai-cells'
property is needed for describing the DAI links.
Reference the dai-common.yaml schema to allow '#sound-dai-cells' to be
used.
This fixes dtbs_check error:
'#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241105091513.3963102-1-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
