- Fix a hibernate regression where the disk was needlessly spun down and
then immediately spun up both when entering and when resuming from
hibernation (me)
- Update the MAINTAINERS file to remove remnants from Jens maintainership
of libata (Damien)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZwj3AgAKCRDJZDGjmcZN
cqNkAQCpnCZVHacaUvOh2pGdEVstT0fSuz9DUpPDffWtyrHbfAEAy1kTbjewnbGS
LVShteA1LiP6UkOGohqMKuc6wBOhfQ4=
=ySz3
-----END PGP SIGNATURE-----
Merge tag 'ata-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Fix a hibernate regression where the disk was needlessly spun down
and then immediately spun up both when entering and when resuming
from hibernation (me)
- Update the MAINTAINERS file to remove remnants from Jens
maintainership of libata (Damien)
* tag 'ata-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata: Update MAINTAINERS file
ata: libata: avoid superfluous disk spin down + spin up during hibernation
Add a subprogram to BPF object file that otherwise has no entry BPF
programs to validate that libbpf can still load this correctly.
Until this was fixed, user could expect this very confusing error message:
libbpf: prog 'dangling_subprog': missing BPF prog type, check ELF section name '.text'
libbpf: prog 'dangling_subprog': failed to load: -22
libbpf: failed to load object 'struct_ops_detach'
libbpf: failed to load BPF skeleton 'struct_ops_detach': -22
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241010211731.4121837-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Libbpf pre-1.0 had a legacy logic of allowing singular non-annotated
(i.e., not having explicit SEC() annotation) function to be treated as
sole entry BPF program (unless there were other explicit entry
programs).
This behavior was dropped during libbpf 1.0 transition period (unless
LIBBPF_STRICT_SEC_NAME flag was unset in libbpf_mode). When 1.0 was
released and all the legacy behavior was removed, the bug slipped
through leaving this legacy behavior around.
Fix this for good, as it actually causes very confusing behavior if BPF
object file only has subprograms, but no entry programs.
Fixes: bd054102a8 ("libbpf: enforce strict libbpf 1.0 behaviors")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241010211731.4121837-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sched:
- Avoid leaking lockdep map
fbdev-dma:
- Only clean up deferred I/O if instanciated
amdgpu:
- Fix invalid UBSAN warnings
- Fix artifacts in MPO transitions
- Hibernation fix
amdkfd:
- Fix an eviction fence leak
radeon:
- Add late register for connectors
- Always set GEM function pointers
i915:
- HDCP refcount fix
nouveau:
- dmem: Fix privileged error in copy engine channel; Fix possible
data leak in migrate_to_ram()
- gsp: Fix coding style
v3d:
- Stop active perfmon before destroying it
vc4:
- Stop active perfmon before destroying it
xe:
- Drop GuC submit_wq pool
- Fix error checking with xa_store()
- Fix missing freq restore on GSC load error
- Fix wedged_mode file permission
- Fix use-after-free in ct communication
-----BEGIN PGP SIGNATURE-----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=MCto
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-10-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes haul for drm, lots of small fixes all over, amdgpu, xe
lead the way, some minor nouveau and radeon fixes, and then a bunch of
misc all over.
Nothing too scary or out of the unusual.
sched:
- Avoid leaking lockdep map
fbdev-dma:
- Only clean up deferred I/O if instanciated
amdgpu:
- Fix invalid UBSAN warnings
- Fix artifacts in MPO transitions
- Hibernation fix
amdkfd:
- Fix an eviction fence leak
radeon:
- Add late register for connectors
- Always set GEM function pointers
i915:
- HDCP refcount fix
nouveau:
- dmem: Fix privileged error in copy engine channel; Fix possible
data leak in migrate_to_ram()
- gsp: Fix coding style
v3d:
- Stop active perfmon before destroying it
vc4:
- Stop active perfmon before destroying it
xe:
- Drop GuC submit_wq pool
- Fix error checking with xa_store()
- Fix missing freq restore on GSC load error
- Fix wedged_mode file permission
- Fix use-after-free in ct communication"
* tag 'drm-fixes-2024-10-11' of https://gitlab.freedesktop.org/drm/kernel:
drm/fbdev-dma: Only cleanup deferred I/O if necessary
drm/xe: Make wedged_mode debugfs writable
drm/xe: Restore GT freq on GSC load error
drm/xe/guc_submit: fix xa_store() error checking
drm/xe/ct: fix xa_store() error checking
drm/xe/ct: prevent UAF in send_recv()
drm/radeon: always set GEM function pointer
nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error
nouveau/dmem: Fix privileged error in copy engine channel
drm/amd/display: fix hibernate entry for DCN35+
drm/amd/display: Clear update flags after update has been applied
drm/amdgpu: partially revert powerplay `__counted_by` changes
drm/radeon: add late_register for connector
drm/amdkfd: Fix an eviction fence leak
drm/vc4: Stop the active perfmon before being destroyed
drm/v3d: Stop the active perfmon before being destroyed
drm/i915/hdcp: fix connector refcounting
drm/nouveau/gsp: remove extraneous ; after mutex
drm/xe: Drop GuC submit_wq pool
drm/sched: Use drm sched lockdep map for submit_wq
The function read_alloc_one_name() does not initialize the name field of
the passed fscrypt_str struct if kmalloc fails to allocate the
corresponding buffer. Thus, it is not guaranteed that
fscrypt_str.name is initialized when freeing it.
This is a follow-up to the linked patch that fixes the remaining
instances of the bug introduced by commit e43eec81c5 ("btrfs: use
struct qstr instead of name and namelen pairs").
Link: https://lore.kernel.org/linux-btrfs/20241009080833.1355894-1-jroi.martin@gmail.com/
Fixes: e43eec81c5 ("btrfs: use struct qstr instead of name and namelen pairs")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Roi Martin <jroi.martin@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As all changed_* functions need to return something, just return 0
directly here, as the verity status is passed via the context.
Reported by LKP: fs/btrfs/send.c:6877:5-8: Unneeded variable: "ret". Return "0" on line 6883
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202410092305.WbyqspH8-lkp@intel.com/
Signed-off-by: Christian Heusel <christian@heusel.eu>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The add_inode_ref() function does not initialize the "name" struct when
it is declared. If any of the following calls to "read_one_inode()
returns NULL,
dir = read_one_inode(root, parent_objectid);
if (!dir) {
ret = -ENOENT;
goto out;
}
inode = read_one_inode(root, inode_objectid);
if (!inode) {
ret = -EIO;
goto out;
}
then "name.name" would be freed on "out" before being initialized.
out:
...
kfree(name.name);
This issue was reported by Coverity with CID 1526744.
Fixes: e43eec81c5 ("btrfs: use struct qstr instead of name and namelen pairs")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Roi Martin <jroi.martin@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit e4eb37cc0f ("block: Remove elevator required features")
removed the usage of `struct request_queue` from elevator_find_get(),
but didn't removed the argument.
Remove the "struct request_queue *q" argument from elevator_find_get()
given it is useless.
Fixes: e4eb37cc0f ("block: Remove elevator required features")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20241011155615.3361143-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Whenever an I/O elevator is changed, the system attempts to load a
module for the new elevator. This occurs regardless of whether the
elevator is already loaded or built directly into the kernel. This
behavior introduces unnecessary overhead and potential issues.
This makes the operation slower, and more error-prone. For instance,
making the problem fixed by [1] visible for users that doesn't even rely
on modules being available through modules.
Do not try to load the ioscheduler if it is already visible.
This change brings two main benefits: it improves the performance of
elevator changes, and it reduces the likelihood of errors occurring
during this process.
[1] Commit e3accac1a9 ("block: Fix elv_iosched_local_module handling of "none" scheduler")
Fixes: 734e1a8603 ("block: Prevent deadlocks when switching elevators")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20241011170122.3880087-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do the same fix as in previous commit also for timerlat-hist.
Link: https://lore.kernel.org/20241011121015.2868751-2-tglozar@redhat.com
Reported-by: Attila Fazekas <afazekas@redhat.com>
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Most fields of struct timerlat_top_cpu are unsigned long long, but the
fields {irq,thread,user}_count are int (32-bit signed).
This leads to overflow when tracing on a large number of CPUs for a long
enough time:
$ rtla timerlat top -a20 -c 1-127 -d 12h
...
0 12:00:00 | IRQ Timer Latency (us) | Thread Timer Latency (us)
CPU COUNT | cur min avg max | cur min avg max
1 #43200096 | 0 0 1 2 | 3 2 6 12
...
127 #43200096 | 0 0 1 2 | 3 2 5 11
ALL #119144 e4 | 0 5 4 | 2 28 16
The average latency should be 0-1 for IRQ and 5-6 for thread, but is
reported as 5 and 28, about 4 to 5 times more, due to the count
overflowing when summed over all CPUs: 43200096 * 127 = 5486412192,
however, 1191444898 (= 5486412192 mod MAX_INT) is reported instead, as
seen on the last line of the output, and the averages are thus ~4.6
times higher than they should be (5486412192 / 1191444898 = ~4.6).
Fix the issue by changing {irq,thread,user}_count fields to unsigned
long long, similarly to other fields in struct timerlat_top_cpu and to
the count variable in timerlat_top_print_sum.
Link: https://lore.kernel.org/20241011121015.2868751-1-tglozar@redhat.com
Reported-by: Attila Fazekas <afazekas@redhat.com>
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since commit 4c39529663 ("slab: Warn on duplicate cache names when
DEBUG_VM=y"), slab complains about duplicate cache names. Hence this
patch. The approach is as follows:
- Maintain an xarray with the slab size as index and a reference count
and a kmem_cache pointer as contents. Use srpt-${slab_size} as kmem
cache name.
- Use 512-byte alignment for all slabs instead of only for some of the
slabs.
- Increment the reference count instead of calling kmem_cache_create().
- Decrement the reference count instead of calling kmem_cache_destroy().
Fixes: 5dabcd0456 ("RDMA/srpt: Add support for immediate data")
Link: https://patch.msgid.link/r/20241009210048.4122518-1-bvanassche@acm.org
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/xpe6bea7rakpyoyfvspvin2dsozjmjtjktpph7rep3h25tv7fb@ooz4cu5z6bq6/
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is "accept*" misspelled as "accpet*" in the comments. Fix the
spelling.
Fixes: 146b9756f1 ("RDMA/irdma: Add connection manager")
Link: https://patch.msgid.link/r/20241008161913.19965-1-green@qrator.net
Signed-off-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ip_dev_find() always returns real net_device address, whether traffic is
running on a vlan or real device, if traffic is over vlan, filling
endpoint struture with real ndev and an attempt to send a connect request
will results in RDMA_CM_EVENT_UNREACHABLE error. This patch fixes the
issue by using vlan_dev_real_dev().
Fixes: 830662f6f0 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://patch.msgid.link/r/20241007132311.70593-1-anumula@chelsio.com
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
While running ISER over SIW, the initiator machine encounters a warning
from skb_splice_from_iter() indicating that a slab page is being used in
send_page. To address this, it is better to add a sendpage_ok() check
within the driver itself, and if it returns 0, then MSG_SPLICE_PAGES flag
should be disabled before entering the network stack.
A similar issue has been discussed for NVMe in this thread:
https://lore.kernel.org/all/20240530142417.146696-1-ofir.gal@volumez.com/
WARNING: CPU: 0 PID: 5342 at net/core/skbuff.c:7140 skb_splice_from_iter+0x173/0x320
Call Trace:
tcp_sendmsg_locked+0x368/0xe40
siw_tx_hdt+0x695/0xa40 [siw]
siw_qp_sq_process+0x102/0xb00 [siw]
siw_sq_resume+0x39/0x110 [siw]
siw_run_sq+0x74/0x160 [siw]
kthread+0xd2/0x100
ret_from_fork+0x34/0x40
ret_from_fork_asm+0x1a/0x30
Link: https://patch.msgid.link/r/20241007125835.89942-1-showrya@chelsio.com
Signed-off-by: Showrya M N <showrya@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Daniel T. Lee says:
====================
selftests/bpf: migrate and remove cgroup/tracing related tests
The BPF testing framework has evolved significantly over time. However,
some legacy tests in the samples/bpf directory have not kept up with
these changes. These outdated tests can cause confusion and increase
maintenance efforts.
This patchset focuses on migrating outdated cgroup and tracing-related
tests from samples/bpf to selftests/bpf, ensuring the BPF test suite
remains current and efficient. Tests that are already covered by
selftests/bpf are removed, while those not yet covered are migrated.
This includes cgroup sock create tests for setting socket attributes
and blocking socket creation, as well as the removal of redundant
cgroup and tracing tests that have been replaced by newer tests.
This patchset covers the following cgroup/tracing tests:
- test_overhead: tests the overhead of BPF programs with task_rename,
now covered by selftests and benchmark tests (rename-*). [1]
- test_override_return: tests the return override functionality, now
handled by kprobe_multi_override in selftests.
- test_probe_write_user: tests the probe_write_user functionality,
now replaced by the probe_user test in selftests.
- test_cgrp2_sock: tests cgroup BPF's ability to set sk_bound_dev_if,
mark, and priority during socket creation. Migrated to selftests as
'sock_create' since no existing tests fully cover this.
- test_cgrp2_sock2: tests blocking socket creation for specific types
(AF_INET{6}, SOCK_DGRAM, IPPROTO_ICMP{V6}). Migrated to selftests
in 'sock_create' test for coverage.
- test_current_task_under_cgroup: tests bpf_current_task_under_cgroup()
to check if a task belongs to a cgroup. Already covered by
task_under_cgroup at selftest and other cgroup ID tests.
- test_cgrp2_tc: tests bpf_skb_under_cgroup() to filter packets based
on cgroup. This behavior is now validated by cgroup_skb_sk_lookup,
which uses bpf_skb_cgroup_id, making this test redundant.
[1]: https://patchwork.kernel.org/cover/13759916
---
Changes in v2:
- commit message fix
Changes in v3:
- Makefile fix
====================
Link: https://lore.kernel.org/r/20241011044847.51584-1-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The samples/bpf has become outdated and often does not follow up with
the latest. This commit removes obsolete tracing-related tests.
Specifically, 'test_overhead' is duplicate with selftests (and bench),
and 'test_override_return', 'test_probe_write_user' tests are obsolete
since they have been replaced by kprobe_multi_override and probe_user
from selftests respectively.
The following files are removed:
- test_overhead: tests the overhead of BPF programs with task_rename,
now covered by selftests and benchmark tests (rename-*). [1]
- test_override_return: tests the return override functionality, now
handled by kprobe_multi_override in selftests.
- test_probe_write_user: tests the probe_write_user functionality,
now replaced by the probe_user test in selftests.
This cleanup will help to streamline the testing framework by removing
redundant tests.
[1]: https://patchwork.kernel.org/cover/13759916
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20241011044847.51584-5-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch removes the obsolete cgroup related tests. These tests are
now redundant because their functionality is already covered by more
modern and comprehensive tests under selftests/bpf.
The following files are removed:
- test_current_task_under_cgroup: tests bpf_current_task_under_cgroup()
to check if a task belongs to a cgroup. Already covered by
task_under_cgroup at selftest and other cgroup ID tests.
- test_cgrp2_tc: tests bpf_skb_under_cgroup() to filter packets based
on cgroup. This behavior is now validated by cgroup_skb_sk_lookup,
which uses bpf_skb_cgroup_id, making this test redundant.
By removing these outdated tests, this patch helps streamline and
modernize the test suite, avoiding duplication of test coverage.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20241011044847.51584-4-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch continues the migration and removal process for cgroup
sock_create tests to selftests.
The test being migrated verifies the ability of cgroup BPF to block the
creation of specific types of sockets using a verdict. Specifically, the
test denies socket creation when the socket is of type AF_INET{6},
SOCK_DGRAM, and IPPROTO_ICMP{V6}. If the requested socket type matches
these attributes, the cgroup BPF verdict blocks the socket creation.
As with the previous commit, this test currently lacks coverage in
selftests, so this patch migrates the functionality into the sock_create
tests under selftests. This migration ensures that the socket creation
blocking behavior with cgroup bpf program is properly tested within the
selftest framework.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20241011044847.51584-3-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch migrates the old test for cgroup BPF that sets
sk_bound_dev_if, mark, and priority when AF_INET{6} sockets are created.
The most closely related tests under selftests are 'test_sock' and
'sockopt'. However, these existing tests serve different purposes.
'test_sock' focuses mainly on verifying the socket binding process,
while 'sockopt' concentrates on testing the behavior of getsockopt and
setsockopt operations for various socket options.
Neither of these existing tests directly covers the ability of cgroup
BPF to set socket attributes such as sk_bound_dev_if, mark, and priority
during socket creation. To address this gap, this patch introduces a
migration of the old cgroup socket attribute test, now included as the
'sock_create' test in selftests/bpf. This ensures that the ability to
configure these attributes during socket creation is properly tested.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20241011044847.51584-2-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We are using the logical address ("bytenr") of an extent as the key for
qgroup records in the dirty extents xarray. This is a problem because the
xarrays use "unsigned long" for keys/indices, meaning that on a 32 bits
platform any extent starting at or beyond 4G is truncated, which is a too
low limitation as virtually everyone is using storage with more than 4G of
space. This means a "bytenr" of 4G gets truncated to 0, and so does 8G and
16G for example, resulting in incorrect qgroup accounting.
Fix this by using sector numbers as keys instead, that is, using keys that
match the logical address right shifted by fs_info->sectorsize_bits, which
is what we do for the fs_info->buffer_radix that tracks extent buffers
(radix trees also use an "unsigned long" type for keys). This also makes
the index space more dense which helps optimize the xarray (as mentioned
at Documentation/core-api/xarray.rst).
Fixes: 3cce39a8ca ("btrfs: qgroup: use xarray to track dirty extents in transaction")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, the CONFIG_CSD_LOCK_WAIT_DEBUG code uses sched_clock() to check
for excessive CSD-lock wait times. This works, but does not guarantee
monotonic timestamps on x86 due to the sched_clock() function's use of
the rdtsc instruction, which does not guarantee ordering. This means
that, given successive calls to sched_clock(), the second might return
an earlier time than the second, that is, time might seem to go backwards.
This can (and does!) result in false-positive CSD-lock wait complaints
claiming almost 2^64 nanoseconds of delay.
Therefore, switch from sched_clock() to ktime_get_mono_fast_ns(), which
does guarantee monotonic timestamps via the rdtsc_ordered() function,
which as the name implies, does guarantee ordered timestamps, at least
in the absence of calls from NMI handlers, which are not involved in
this code path.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Cc: Leonardo Bras <leobras@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Even though system user has a supplementary group, It gets
NT_STATUS_ACCESS_DENIED when attempting to create file or directory.
This patch add KSMBD_EVENT_LOGIN_REQUEST_EXT/RESPONSE_EXT netlink events
to get supplementary groups list. The new netlink event doesn't break
backward compatibility when using old ksmbd-tools.
Co-developed-by: Atte Heikkilä <atteh.mailbox@gmail.com>
Signed-off-by: Atte Heikkilä <atteh.mailbox@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Broadcom STB platforms have for historical reasons included both
"arm,scmi-smc" and "arm,scmi" in their SCMI Device Tree node compatible
string, in that order.
After the commit b53515fa17 ("firmware: arm_scmi: Make MBOX transport
a standalone driver") and with a kernel configuration that enables both
the SMC and the mailbox transports, we would probe the mailbox transport,
but fail to complete since we would not have a mailbox driver available.
With each SCMI transport being a platform driver with its own set of
compatible strings to match, rather than an unique platform driver entry
point, we no longer match from most specific to least specific. There is
also no simple way for the mailbox driver to return -ENODEV and let
another platform driver attempt probing. This leads to a platform with
no SCMI provider, therefore all drivers depending upon SCMI resources
are put on deferred probe forever.
By keeping the SMC transport objects linked first, we can let the
platform driver match the compatible string and probe successfully with
no adverse effects on platforms using the mailbox transport.
This is just the workaround to the issue observed which doesn't have any
impact on the other platforms.
Fixes: b53515fa17 ("firmware: arm_scmi: Make MBOX transport a standalone driver")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20241007235413.507860-1-florian.fainelli@broadcom.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Clang static checker(scan-build) throws below warning：
| drivers/firmware/arm_scmi/driver.c:line 2915, column 2
| Attempt to free released memory.
When devm_add_action_or_reset() fails, scmi_debugfs_common_cleanup()
will run twice which causes double free of 'dbg->name'.
Remove the redundant scmi_debugfs_common_cleanup() to fix this problem.
Fixes: c3d4aed763 ("firmware: arm_scmi: Populate a common SCMI debugfs root")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241011104001.1546476-1-suhui@nfschina.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
sysctl_tcp_l3mdev_accept is read from TCP receive fast path from
tcp_v6_early_demux(),
__inet6_lookup_established,
inet_request_bound_dev_if().
Move it to netns_ipv4_read_rx.
Remove the '#ifdef CONFIG_NET_L3_MASTER_DEV' that was guarding
its definition.
Note this adds a hole of three bytes that could be filled later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Wei Wang <weiwan@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Link: https://patch.msgid.link/20241010034100.320832-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The system interface connection status register is not immediately
correct upon line side link up. This results in the status being read as
OFF and then transitioning to the correct host side link mode with a
short delay. This causes the phylink framework passing the OFF status
down to all MAC config drivers, resulting in the host side link being
misconfigured, which in turn can lead to link flapping or complete
packet loss in some cases.
Mitigate this by periodically polling the register until it not showing
the OFF state. This will be done every 1ms for 10ms, using the same
poll/timeout as the processor intensive operation reads.
If the phy is still expressing the OFF state after the timeout, then set
the link to false and pass the NA interface mode onto the phylink
framework.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241010004935.1774601-1-aryan.srivastava@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes a regression which prevents parallel DIO reads.
Fixes: 0cac51185e ("f2fs: fix to avoid racing in between read and OPU dio write")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now that we have switched to using wiphy_lock() there's no need to have
update_wk cancel call separately, for consistency move it to the rest of code
handling IEEE80211_STA_NONE state.
No functional changes.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241007165932.78081-7-kvalo@kernel.org
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
In ath12k_mac_set_key() removing the exit label was a bit more complex so do
it in a separate patch. Remove the else branch and remove now the unnecessary
ret initialisation.
No functional changes.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241007165932.78081-6-kvalo@kernel.org
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
After removing the conf_mutex in the previous patch there are now unnecessary
labels in mac.c. Remove those and instead use directly return.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241007165932.78081-5-kvalo@kernel.org
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Switch from using driver specific ar->conf_mutex to wiphy->mtx. The benefits are:
* one lock less and simplified locking
* possibility to use wiphy_work_queue() without other locks
Most of the mac80211 ops are called within wiphy_lock(), most notable exception
being tx op. This can be checked with lockdep_assert_wiphy() from
net/mac80211/driver-ops.[ch] and I veried that by manually going through all
the ops in ath12k_ops which had lockdep_assert_wiphy().
The conversion was simple:
* All conf_mutex lock() and unlock() calls which
already were called under wiphy_lock() I replaced with
lockdep_assert_wiphy().
* The rest of conf_mutex calls I replaced with wiphy_lock() and wiphy_unlock().
* All lockdep_asset_held(conf_mutex) calls I replaced with
lockdep_assert_wiphy().
One exception was in ath12k_core_post_reconfigure_recovery() where the wiphy
lock needs to be taken before hw_mutex to avoid a lockdep warning.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241007165932.78081-4-kvalo@kernel.org
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
For preparation to switch ath12k to use wiphy_lock() we can convert
ath12k_sta_rc_update_wk() to use wiphy_work_queue() for consistency. To avoid
any deadlocks do the struct ath12k_sta::update_wk conversion before switching
to using wiphy_lock() throughout the driver.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241007165932.78081-3-kvalo@kernel.org
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Atm the display HPD interrupts that got disabled during runtime
suspend, are re-enabled only if d3cold is enabled. Fix things by
also re-enabling the interrupts if d3cold is disabled.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009194358.1321200-5-imre.deak@intel.com
For clarity separate the d3cold and non-d3cold runtime PM handling. The
only change in behavior is disabling polling later during runtime
resume. This shouldn't make a difference, since the poll disabling is
handled from a work, which could run at any point wrt. the runtime
resume handler. The work will also require a runtime PM reference,
syncing it with the resume handler.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009194358.1321200-4-imre.deak@intel.com
conn_lowest_minor() last use was removed by 2011 commit
69a227731a ("drbd: Pass a peer device to a number of fuctions")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241010204426.277535-1-linux@treblig.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the function mtk_dai_hdmitx_dptx_hw_params, the variable
'ret' is redundant, thus remove it.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20241010073547.3720-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As there is very little ordering in the KVM API, userspace can
instanciate a half-baked GIC (missing its memory map, for example)
at almost any time.
This means that, with the right timing, a thread running vcpu-0
can enter the kernel without a GIC configured and get a GIC created
behind its back by another thread. Amusingly, it will pick up
that GIC and start messing with the data structures without the
GIC having been fully initialised.
Similarly, a thread running vcpu-1 can enter the kernel, and try
to init the GIC that was previously created. Since this GIC isn't
properly configured (no memory map), it fails to correctly initialise.
And that's the point where we decide to teardown the GIC, freeing all
its resources. Behind vcpu-0's back. Things stop pretty abruptly,
with a variety of symptoms. Clearly, this isn't good, we should be
a bit more careful about this.
It is obvious that this guest is not viable, as it is missing some
important part of its configuration. So instead of trying to tear
bits of it down, let's just mark it as *dead*. It means that any
further interaction from userspace will result in -EIO. The memory
will be released on the "normal" path, when userspace gives up.
Cc: stable@vger.kernel.org
Reported-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241009183603.3221824-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Konstantin reports the maintainer's address bounces.
There is no other maintainer and the driver is quite old.
There is a good chance nobody is using this driver any more.
Let's try to remove it completely, we can revert it back in
if someone complains.
Link: https://lore.kernel.org/20240925-bizarre-earwig-from-pluto-1484aa@lemu/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Denis Kirjanov <dkirjanov@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
A registered eDP connector is considered to be always connected, so it's
unnecessary to poll it for a connect/disconnect event. Polling it
involves AUX accesses toggling the panel power, which in turn can
generate a spurious short HPD pulse and possibly a new poll cycle via
the short HPD handler runtime resuming the device. Avoid this by
disabling the polling for eDP connectors.
This avoids IGT tests timing out while waiting for the device to runtime
suspend, the timeout caused by the above runtime resume->poll->suspend->
resume cycle keeping the device in the resumed state.
Testcase: igt/kms_pm_rpm/unverisal-planes
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009194358.1321200-3-imre.deak@intel.com
