If the device is runtime suspended the eDP panel power is also off.
Ignore a short HPD on eDP if the device is suspended accordingly,
instead of checking the panel power state via the PPS registers for the
same purpose. The latter involves runtime resuming the device
unnecessarily, in a frequent scenario where the panel generates a
spurious short HPD after disabling the panel power and the device is
runtime suspended.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009194358.1321200-2-imre.deak@intel.com
KASAN reported following issue:
BUG: KASAN: stack-out-of-bounds in tb_retimer_scan+0xffe/0x1550 [thunderbolt]
Read of size 4 at addr ffff88810111fc1c by task kworker/u56:0/11
CPU: 0 UID: 0 PID: 11 Comm: kworker/u56:0 Tainted: G U 6.11.0+ #1387
Tainted: [U]=USER
Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt]
Call Trace:
<TASK>
dump_stack_lvl+0x6c/0x90
print_report+0xd1/0x630
kasan_report+0xdb/0x110
__asan_report_load4_noabort+0x14/0x20
tb_retimer_scan+0xffe/0x1550 [thunderbolt]
tb_scan_port+0xa6f/0x2060 [thunderbolt]
tb_handle_hotplug+0x17b1/0x3080 [thunderbolt]
process_one_work+0x626/0x1100
worker_thread+0x6c8/0xfa0
kthread+0x2c8/0x3a0
ret_from_fork+0x3a/0x80
ret_from_fork_asm+0x1a/0x30
This happens because the loop variable still gets incremented by one so
max becomes 3 instead of 2, and this makes the second loop read past the
the array declared on the stack.
Fix this by assigning to max directly in the loop body.
Fixes: ff6ab055e0 ("thunderbolt: Add receiver lane margining support for retimers")
CC: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Introduce sysfs attributes to the intel-ish-ipc driver to expose the base
and project firmware versions for ISH devices that load firmware from the
host.
The build tool embeds these versions into the ISH global manifest within
the firmware binary during the firmware build process. The driver, upon
loading the firmware, extracts this version information from the manifest
and makes it accessible via sysfs. The base version corresponds to the
firmware version provided in Intel's Firmware Development Kit (FDK), while
the project version reflects the vendor-customized firmware derived from
the FDK.
These attributes provide userspace tools and applications with the
ability to easily query the firmware versions, which is essential for
firmware validation and troubleshooting.
Example usages:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/firmware/base_version
5.8.0.7716
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/firmware/project_version
5.8.0.12472
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The HDaudio mlink support makes it more logical to couple interrupt
enabling/disabling with power-up/down sequences.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20241007121241.30914-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the eml_lock is already taken, we need an unlocked version.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241007121241.30914-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Irq handler need to be executed as fast as possible, so
the log in irq handler is better to use dev_dbg which needs
to be enabled when debugging.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/1728622433-2873-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the HiHope boards, we have a single port with a single endpoint defined
as below:
....
rsnd_port: port {
rsnd_endpoint: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint>;
frame-master = <&rsnd_endpoint>;
playback = <&ssi2>;
};
};
....
With commit 547b02f74e ("ASoC: rsnd: enable multi Component support for
Audio Graph Card/Card2"), support for multiple ports was added. This caused
probe failures on HiHope boards, as the endpoint could not be retrieved due
to incorrect device node pointers being used.
This patch fixes the issue by updating the `rsnd_dai_of_node()` and
`rsnd_dai_probe()` functions to use the correct device node pointers based
on the port names ('port' or 'ports'). It ensures that the endpoint is
properly parsed for both single and multi-port configurations, restoring
compatibility with HiHope boards.
Fixes: 547b02f74e ("ASoC: rsnd: enable multi Component support for Audio Graph Card/Card2")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241010141432.716868-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable slot_found is being initialized to zero and inside
a for-loop is being checked if it's reached MAX_NUM_CH, however,
this is currently impossible since slot_found is never changed.
In a previous loop a similar coding pattern is used and slot_found
is being incremented. It appears the increment of slot_found is
missing from the loop, so fix the code by adding in the increment.
Fixes: 6a8e1d46f0 ("ASoC: max98388: add amplifier driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20241010182032.776280-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a driver for the Corsair Void family of headsets, supporting:
- Battery reporting (power_supply)
- Sidetone setting support
- Physical microphone location reporting
- Headset and receiver firmware version reporting
- Built-in alert triggering
- USB wireless_status
Tested with a Void Pro Wireless, Void Elite Wireless and a Void Elite Wired
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Apply Hardware Architecture Specification compatible delays
for main island power delivery for 50xx and above.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004162505.1695605-3-maciej.falkowski@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Add support for the 5th generation of Intel NPU that
is going to be present in PTL_P (Panther Lake) CPUs.
NPU5 code reuses almost all of previous driver code.
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004162505.1695605-2-maciej.falkowski@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Do not restrict range for preemption buffers allocation just to the end
of user and shave ranges, use them whole instead to avoid situation
where end of range might be already allocated causing preemption buffers
allocation to fail.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-27-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Allow to proceed with job command queue creation even if preemption
buffers failed to be allocated, print warning that preemption on such
command queue will be disabled.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-26-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Warn in ivpu_file_priv_put() checks a pointer that is previously
accessed. Warn in ivpu_ipc_fini() can be triggered even in valid cases
where IPC is disabled upon closing the device.
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-25-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Move diagnostic functions to common error handling within ivpu_boot()
function to ensure diagnostics are gathered even in cases where NPU
fails after successful boot (DCT and HWS init failures).
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-24-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Refactor IPC send and receive functions to allow correct
handling of operations that should not trigger a recovery process.
Expose ivpu_send_receive_internal(), which is now utilized by the D0i3
entry, DCT initialization, and HWS initialization functions.
These functions have been modified to return error codes gracefully,
rather than initiating recovery.
The updated functions are invoked within ivpu_probe() and ivpu_resume(),
ensuring that any errors encountered during these stages result in a proper
teardown or shutdown sequence. The previous approach of triggering recovery
within these functions could lead to a race condition, potentially causing
undefined behavior and kernel crashes due to null pointer dereferences.
Fixes: 45e45362e0 ("accel/ivpu: Introduce ivpu_ipc_send_receive_active()")
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-23-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
The current reset_engine implementation unconditionally resets
all engines. Improve implementation to reset only the engine
requested by the user space to allow more granular testing.
Also use DEFINE_DEBUGFS_ATTRIBUTE() to simplify implementation.
Same changes applied to resume_engine debugfs file for consistency.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-22-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
With recent Simics model update CLOCK_RESOURCE_OWN_ACK signal
was implemented as part of VPU STATUS register and workaround
is no longer needed.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-21-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Add new test_mode BIT(9) that forces firmware to
enable turbo burst mode.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-20-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Save last used ID and use it to limit the possible values
for the ID. This should decrease the rate at which the IDs
are reused, which will make debugging easier.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-19-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Change debug message to error level in case of receiving
non-successful result of JSM message.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-18-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Add one jiffy to ensure wait function never times out before
intended timeout value, which could happen if absolute timeout value
is less than (1s / CONFIG_HZ) in the future.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-16-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Make the dvfs_mode read-write to allow checking current mode.
Simplify the dvfs_mode implementation with the DEFINE_DEBUGFS_ATTRIBUTE.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-15-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Previously Simics was not providing workpoint for configurations
with 0 tiles enabled, that had to be worked around in the KMD.
This got fixed in Simics and workaround is no longer needed.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-14-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Hardcoded driver date is useless, so use kernel version as a driver date
to make identifying .ko file easier. Also allow to pass DRIVER_DATE
on build time to allow versioning the driver in case it is built out
of the tree.
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-13-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
With recent Simics update DVFS flows using cdyn were fixed
and it is possible to enable D0i3/D3 entry flows on autosuspend.
Set autosuspend timeout to 100 ms by default on Simics.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-11-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Follow HW documentation recommendation of 500 ns delay between setting
AON_PWR_ISLAND_TRICKLE_EN and AON_PWR_ISLAND_EN registers during power
island enabling. Previously this was only done correctly for VPU 4+.
VPU 3.7 had the delay added after power island disable where it is not
needed.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-10-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Send JSM state dump message at the beginning of TDR handler. This allows
FW to collect debug info in the FW log before the state of the NPU is
lost allowing to analyze the cause of a TDR.
Wait a predefined timeout (10 ms) so the FW has a chance to write debug
logs. We cannot wait for JSM response at this point because IRQs are
already disabled before TDR handler is invoked.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-9-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Use coredump (if available) to collect FW logs in case of a FW crash.
This makes dmesg more readable and allows to collect more log data.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-8-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
- Fix empty log detection that couldn't work without read_wrap_count
- Start printing wrapped log from correct position (log_start)
- Properly handle logs that are wrapped multiple times in reference
to reader position
- Don't add a newline when log buffer is wrapped
- Always add a newline after printing a log buffer in case log does
not end with one
Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-6-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Add ivpu_fw_log_reset() that resets the read_index of all FW logs
on cold boot so logs are properly read.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-4-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
This commit bumps:
- Boot API from 3.24.0 to 3.26.3
- JSM API from 3.16.0 to 3.25.0
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Co-developed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-2-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
The variable declaration in this function predates the merge of the
nrext64 (aka 64-bit extent counters) feature, which means that the
variable declaration type is insufficient to avoid an integer overflow.
Fix that by redeclaring the variable to be xfs_extnum_t.
Coverity-id: 1630958
Fixes: 8f71bede8e ("xfs: repair inode fork block mapping data structures")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In the function es8323_i2c_probe(), devm_kzalloc() could
possibly return NULL pointer, so IS_ERR() is wrong check
in this place, thus fix it.
Fixes: b97391a604 ("ASoC: codecs: Add support for ES8323")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241011073115.2384-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix a "cast to pointer from integer of different size" build error
due to IS_ERROR_VALUE() used with something which is not a pointer.
- Fix an unused data build warning.
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQQQ/+b4s5DeF6zCYyNoqS/rAbjdeAUCZv4m/xwcY2hyaXN0b3Bo
ZS5sZXJveUBjc2dyb3VwLmV1AAoJEGipL+sBuN14EhQBAM18WZPM03Lmf7FEy+qX
ZCLd3DPRF2jXu8TfL83zwS3oAQC6fyYxtq0U2Wbo66TTtmjWfTXMgbK8AebDa92J
4hugDg==
=1fza
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=s55C
-----END PGP SIGNATURE-----
Merge tag 'soc_fsl-6.12-3' of https://github.com/chleroy/linux into arm/fixes
FSL SOC fixes for v6.12:
- Fix a "cast to pointer from integer of different size" build error
due to IS_ERROR_VALUE() used with something which is not a pointer.
- Fix an unused data build warning.
* tag 'soc_fsl-6.12-3' of https://github.com/chleroy/linux:
soc: fsl: cpm1: qmc: Fix unused data compilation warning
soc: fsl: cpm1: qmc: Do not use IS_ERR_VALUE() on error pointers
Link: https://lore.kernel.org/r/c954bdb0-0c16-491a-8662-37e58f07208f@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patches for SoCs are expected to be picked up by SoC submaintainers.
The main SoC maintainers should be addressed only in few cases.
Rewrite the section about maintainer handling to document above
expectation.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Will Deacon <will@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Conor Dooley <conor@kernel.org>
Cc: Heiko Stübner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240925095635.30452-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ep93xx_dma.c: In function 'ep93xx_dma_of_probe':
ep93xx_dma.c:1409:74: warning: '%u' directive output may be truncated
writing between 1 and 8 bytes into a region
of size 2 [-Wformat-truncation=]
snprintf(dma_clk_name, sizeof(dma_clk_name), "m2p%u", i);
^~
Fixes: d7333f9d33 ("dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409172024.pU8U5beA-lkp@intel.com/
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/2bf9c37aad8f085839f9c63104f7275742f51945.camel@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
