In preparation for allowing system call enter/exit instrumentation to
handle page faults, make sure that perf can handle this change by
explicitly disabling preemption within the perf system call tracepoint
probes to respect the current expectations within perf ring buffer code.
This change does not yet allow perf to take page faults per se within
its probe, but allows its existing probes to adapt to the upcoming
change.
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Link: https://lore.kernel.org/20241009010718.2050182-4-mathieu.desnoyers@efficios.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In preparation for allowing system call enter/exit instrumentation to
handle page faults, make sure that ftrace can handle this change by
explicitly disabling preemption within the ftrace system call tracepoint
probes to respect the current expectations within ftrace ring buffer
code.
This change does not yet allow ftrace to take page faults per se within
its probe, but allows its existing probes to adapt to the upcoming
change.
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Link: https://lore.kernel.org/20241009010718.2050182-3-mathieu.desnoyers@efficios.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In preparation for allowing system call tracepoints to handle page
faults, introduce TRACE_EVENT_SYSCALL to declare the sys_enter/sys_exit
tracepoints.
Move the common code between __DECLARE_TRACE and __DECLARE_TRACE_SYSCALL
into __DECLARE_TRACE_COMMON.
This change is not meant to alter the generated code, and only prepares
the following modifications.
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Link: https://lore.kernel.org/20241009010718.2050182-2-mathieu.desnoyers@efficios.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Like how we already do when the allocator seems to be stuck, check if
we're waiting too long for a journal reservation and print some debug
info.
This is specifically to track down
https://github.com/koverstreet/bcachefs/issues/656
which is showing up in userspace where we don't have sysfs/debugfs to
get the journal debug info.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a closure version of wait_event_timeout(), with the same semantics.
The closure version is useful because unlike wait_event(), it allows
blocking code to run in the conditional expression.
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch adds a bounds check to the bch2_opt_to_text function to prevent
NULL pointer dereferences when accessing the opt->choices array. This
ensures that the index used is within valid bounds before dereferencing.
The new version enhances the readability.
Reported-and-tested-by: syzbot+37186860aa7812b331d5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=37186860aa7812b331d5
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We will get this if we wake up first:
Kernel panic - not syncing: btree_node_write_done leaked btree_trans
since there are still transactions waiting for cycle detectors after
BTREE_NODE_write_in_flight is cleared.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Fix failure to validate that accounting replicas entries point to
valid devices: this wasn't a real bug since they'd be cleaned up by
GC, but is still something we should know about
- Fix failure to validate that dev_data_type entries point to valid
devices: this does fix a real bug, since bch2_accounting_read() would
then try to copy the counters to that device and pop an inconsistent
error when the device didn't exist
- Remove accounting entries that are zeroed or invalid: if we're not
validating them we need to get rid of them: they might not exist in
the superblock, so we need the to trigger the superblock mark path
when they're readded.
This fixes the replication.ktest rereplicate test, which was failing
with "superblock not marked for replicas..."
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
fsck can now correctly check if inodes in interior snapshot nodes are
open/in use.
- Tweak the vfs inode rhashtable so that the subvolume ID isn't hashed,
meaning inums in different subvolumes will hash to the same slot. Note
that this is a hack, and will cause problems if anyone ever has the
same file in many different snapshots open all at the same time.
- Then check if any of those subvolumes is a descendent of the snapshot
ID being checked
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There's an inherent race in taking a snapshot while an unlinked file is
open, and then reattaching it in the child snapshot.
In the interior snapshot node the file will appear unlinked, as though
it should be deleted - it's not referenced by anything in that snapshot
- but we can't delete it, because the file data is referenced by the
child snapshot.
This was being handled incorrectly with
propagate_key_to_snapshot_leaves() - but that doesn't resolve the
fundamental inconsistency of "this file looks like it should be deleted
according to normal rules, but - ".
To fix this, we need to fix the rule for when an inode is deleted. The
previous rule, ignoring snapshots (there was no well-defined rule
for with snapshots) was:
Unlinked, non open files are deleted, either at recovery time or
during online fsck
The new rule is:
Unlinked, non open files, that do not exist in child snapshots, are
deleted.
To make this work transactionally, we add a new inode flag,
BCH_INODE_has_child_snapshot; it overrides BCH_INODE_unlinked when
considering whether to delete an inode, or put it on the deleted list.
For transactional consistency, clearing it handled by the inode trigger:
when deleting an inode we check if there are parent inodes which can now
have the BCH_INODE_has_child_snapshot flag cleared.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Made a minor edit in the comments for 'struct zswap_entry' to delete the
description of the 'value' member that was deleted in commit 20a5532ffa
("mm: remove code to handle same filled pages").
Link: https://lkml.kernel.org/r/20241002194213.30041-1-kanchana.p.sridhar@intel.com
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Fixes: 20a5532ffa ("mm: remove code to handle same filled pages")
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Usama Arif <usamaarif642@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Wajdi Feghali <wajdi.k.feghali@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This
is the case for example on some arm64 configurations, where marking 4k
PTEs in the direct map not present can only be done if the direct map is
set up at 4k granularity in the first place (as ARM's break-before-make
semantics do not easily allow breaking apart large/gigantic pages).
More precisely, on arm64 systems with !can_set_direct_map(),
set_direct_map_invalid_noflush() is a no-op, however it returns success
(0) instead of an error. This means that memfd_secret will seemingly
"work" (e.g. syscall succeeds, you can mmap the fd and fault in pages),
but it does not actually achieve its goal of removing its memory from the
direct map.
Note that with this patch, memfd_secret() will start erroring on systems
where can_set_direct_map() returns false (arm64 with
CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and
CONFIG_KFENCE=n), but that still seems better than the current silent
failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most
arm64 systems actually have a working memfd_secret() and aren't be
affected.
From going through the iterations of the original memfd_secret patch
series, it seems that disabling the syscall in these scenarios was the
intended behavior [1] (preferred over having
set_direct_map_invalid_noflush return an error as that would result in
SIGBUSes at page-fault time), however the check for it got dropped between
v16 [2] and v17 [3], when secretmem moved away from CMA allocations.
[1]: https://lore.kernel.org/lkml/20201124164930.GK8537@kernel.org/
[2]: https://lore.kernel.org/lkml/20210121122723.3446-11-rppt@kernel.org/#t
[3]: https://lore.kernel.org/lkml/20201125092208.12544-10-rppt@kernel.org/
Link: https://lkml.kernel.org/r/20241001080056.784735-1-roypat@amazon.co.uk
Fixes: 1507f51255 ("mm: introduce memfd_secret system call to create "secret" memory areas")
Signed-off-by: Patrick Roy <roypat@amazon.co.uk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We should only check for pmd_special() after we made sure that we have a
present PMD. For example, if we have a migration PMD, pmd_special() might
indicate that we have a special PMD although we really don't.
This fixes confusing migration entries as PFN mappings, and not doing what
we are supposed to do in the "is_swap_pmd()" case further down in the
function -- including messing up COW, page table handling and accounting.
Link: https://lkml.kernel.org/r/20240926154234.2247217-1-david@redhat.com
Fixes: bc02afbd4d ("mm/fork: accept huge pfnmap entries")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: syzbot+bf2c35fa302ebe3c7471@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/66f15c8d.050a0220.c23dd.000f.GAE@google.com/
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In resource_test_insert_resource(), the pointer is used in error message
after kfree(). This is user-after-free. To fix this, we need to call
kunit_add_action_or_reset() to schedule memory freeing after usage. But
kunit_add_action_or_reset() itself may fail and free the memory. So, its
return value should be checked and abort the test for failure. Then, we
found that other usage of kunit_add_action_or_reset() in
resource_test_region_intersects() needs to be fixed too. We fix all these
user-after-free bugs in this patch.
Link: https://lkml.kernel.org/r/20240930070611.353338-1-ying.huang@intel.com
Fixes: 99185c10d5 ("resource, kunit: add test case for region_intersects()")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Kees Bakker <kees@ijzerbout.nl>
Closes: https://lore.kernel.org/lkml/87ldzaotcg.fsf@yhuang6-desk2.ccr.corp.intel.com/
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When /proc/kcore is read an attempt to read the first two pages results in
HW-specific page swap on s390 and another (so called prefix) pages are
accessed instead. That leads to a wrong read.
Allow architecture-specific translation of memory addresses using
kc_xlate_dev_mem_ptr() and kc_unxlate_dev_mem_ptr() callbacks similarily
to /dev/mem xlate_dev_mem_ptr() and unxlate_dev_mem_ptr() callbacks. That
way an architecture can deal with specific physical memory ranges.
Re-use the existing /dev/mem callback implementation on s390, which
handles the described prefix pages swapping correctly.
For other architectures the default callback is basically NOP. It is
expected the condition (vaddr == __va(__pa(vaddr))) always holds true for
KCORE_RAM memory type.
Link: https://lkml.kernel.org/r/20240930122119.1651546-1-agordeev@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The hmm2 double_map test was failing due to an incorrect buffer->mirror
size. The buffer->mirror size was 6, while buffer->ptr size was 6 *
PAGE_SIZE. The test failed because the kernel's copy_to_user function was
attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the
size of buffer->mirror was incorrect, copy_to_user failed.
This patch corrects the buffer->mirror size to 6 * PAGE_SIZE.
Test Result without this patch
==============================
# RUN hmm2.hmm2_device_private.double_map ...
# hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0)
# double_map: Test terminated by assertion
# FAIL hmm2.hmm2_device_private.double_map
not ok 53 hmm2.hmm2_device_private.double_map
Test Result with this patch
===========================
# RUN hmm2.hmm2_device_private.double_map ...
# OK hmm2.hmm2_device_private.double_map
ok 53 hmm2.hmm2_device_private.double_map
Link: https://lkml.kernel.org/r/20240927050752.51066-1-donettom@linux.ibm.com
Fixes: fee9f6d1b8 ("mm/hmm/test: add selftests for HMM")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise,
vmf->address not aligned to fault_size will be aligned to the next
alignment, that can result in memory failure getting the wrong address.
It's a subtle situation that only can be observed in
page_mapped_in_vma() after the page is page fault handled by
dev_dax_huge_fault. Generally, there is little chance to perform
page_mapped_in_vma in dev-dax's page unless in specific error injection
to the dax device to trigger an MCE - memory-failure. In that case,
page_mapped_in_vma() will be triggered to determine which task is
accessing the failure address and kill that task in the end.
We used self-developed dax device (which is 2M aligned mapping) , to
perform error injection to random address. It turned out that error
injected to non-2M-aligned address was causing endless MCE until panic.
Because page_mapped_in_vma() kept resulting wrong address and the task
accessing the failure address was never killed properly:
[ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.049006] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.448042] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.792026] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.162502] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.461116] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.764730] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.042128] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.464293] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.818090] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3787.085297] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
It took us several weeks to pinpoint this problem, but we eventually
used bpftrace to trace the page fault and mce address and successfully
identified the issue.
Joao added:
; Likely we never reproduce in production because we always pin
: device-dax regions in the region align they provide (Qemu does
: similarly with prealloc in hugetlb/file backed memory). I think this
: bug requires that we touch *unpinned* device-dax regions unaligned to
: the device-dax selected alignment (page size i.e. 4K/2M/1G)
Link: https://lkml.kernel.org/r/23c02a03e8d666fef11bbe13e85c69c8b4ca0624.1727421694.git.llfl@linux.alibaba.com
Fixes: b9b5777f09 ("device-dax: use ALIGN() for determining pgoff")
Signed-off-by: Kun(llfl) <llfl@linux.alibaba.com>
Tested-by: JianXiong Zhao <zhaojianxiong.zjx@alibaba-inc.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Calling into kthread unparking unconditionally is mostly harmless when
the kthread is already unparked. The wake up is then simply ignored
because the target is not in TASK_PARKED state.
However if the kthread is per CPU, the wake up is preceded by a call
to kthread_bind() which expects the task to be inactive and in
TASK_PARKED state, which obviously isn't the case if it is unparked.
As a result, calling kthread_stop() on an unparked per-cpu kthread
triggers such a warning:
WARNING: CPU: 0 PID: 11 at kernel/kthread.c:525 __kthread_bind_mask kernel/kthread.c:525
<TASK>
kthread_stop+0x17a/0x630 kernel/kthread.c:707
destroy_workqueue+0x136/0xc40 kernel/workqueue.c:5810
wg_destruct+0x1e2/0x2e0 drivers/net/wireguard/device.c:257
netdev_run_todo+0xe1a/0x1000 net/core/dev.c:10693
default_device_exit_batch+0xa14/0xa90 net/core/dev.c:11769
ops_exit_list net/core/net_namespace.c:178 [inline]
cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:640
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd70 kernel/workqueue.c:3393
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Fix this with skipping unecessary unparking while stopping a kthread.
Link: https://lkml.kernel.org/r/20240913214634.12557-1-frederic@kernel.org
Fixes: 5c25b5ff89 ("workqueue: Tag bound workers with KTHREAD_IS_PER_CPU")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: syzbot+943d34fa3cf2191e3068@syzkaller.appspotmail.com
Tested-by: syzbot+943d34fa3cf2191e3068@syzkaller.appspotmail.com
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commit eab0af905b.
There is no existing user of those flags. PF_MEMALLOC_NOWARN is dangerous
because a nested allocation context can use GFP_NOFAIL which could cause
unexpected failure. Such a code would be hard to maintain because it
could be deeper in the call chain.
PF_MEMALLOC_NORECLAIM has been added even when it was pointed out [1] that
such a allocation contex is inherently unsafe if the context doesn't fully
control all allocations called from this context.
While PF_MEMALLOC_NOWARN is not dangerous the way PF_MEMALLOC_NORECLAIM is
it doesn't have any user and as Matthew has pointed out we are running out
of those flags so better reclaim it without any real users.
[1] https://lore.kernel.org/all/ZcM0xtlKbAOFjv5n@tiehlicka/
Link: https://lkml.kernel.org/r/20240926172940.167084-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "remove PF_MEMALLOC_NORECLAIM" v3.
This patch (of 2):
bch2_new_inode relies on PF_MEMALLOC_NORECLAIM to try to allocate a new
inode to achieve GFP_NOWAIT semantic while holding locks. If this
allocation fails it will drop locks and use GFP_NOFS allocation context.
We would like to drop PF_MEMALLOC_NORECLAIM because it is really
dangerous to use if the caller doesn't control the full call chain with
this flag set. E.g. if any of the function down the chain needed
GFP_NOFAIL request the PF_MEMALLOC_NORECLAIM would override this and
cause unexpected failure.
While this is not the case in this particular case using the scoped gfp
semantic is not really needed bacause we can easily pus the allocation
context down the chain without too much clutter.
[akpm@linux-foundation.org: fix kerneldoc warnings]
Link: https://lkml.kernel.org/r/20240926172940.167084-1-mhocko@kernel.org
Link: https://lkml.kernel.org/r/20240926172940.167084-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz> # For vfs changes
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Disabling preemption in the GRU driver is unnecessary, and clashes with
sleeping locks in several code paths. Remove preempt_disable and
preempt_enable from the GRU driver.
Signed-off-by: Dimitri Sivanich <sivanich@hpe.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After the delegation is returned to the NFS server remove it
from the server's delegations list to reduce the time it takes
to scan this list.
Network trace captured while running the below script shows the
time taken to service the CB_RECALL increases gradually due to
the overhead of traversing the delegation list in
nfs_delegation_find_inode_server.
The NFS server in this test is a Solaris server which issues
CB_RECALL when receiving the all-zero stateid in the SETATTR.
mount=/mnt/data
for i in $(seq 1 20)
do
echo $i
mkdir $mount/testtarfile$i
time tar -C $mount/testtarfile$i -xf 5000_files.tar
done
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
* Patch to handle code-points with the Ignorable property as regular
character instead of treating them as an empty string. (Me)
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS3XO7QfvpFoONBhH1OwQgI3t8RJgUCZwbNtQAKCRBOwQgI3t8R
JrlrAP4yCrZCp4YPlXO6oQGfS9RIeYpmcMzGmp1IAeqlzpB5qwD/YS53kiAzF4qV
+eD2fl/O4qNhZcWqBZKSH4shZBbXJAg=
=XCsY
-----END PGP SIGNATURE-----
Merge tag 'unicode-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode fix from Gabriel Krisman Bertazi:
- Handle code-points with the Ignorable property as regular character
instead of treating them as an empty string (me)
* tag 'unicode-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: Don't special case ignorable code points
Add workaround (wa) 15016589081 which applies to Xe2_v3_LPG_MD.
Xe2_v3_LPG_MD is a Lunar Lake platform with GFX version: 20.04.
This wa is type: permanent, and hence is applicable on all steppings.
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009065542.283151-1-aradhya.bhatia@intel.com
add_perf_probe_events has been unused since 2015's commit
b02137cc65 ("perf probe: Move print logic into cmd_probe()")
which confusingly now uses perf_add_probe_events.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240929010659.430208-1-linux@treblig.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
We don't need to handle them separately. Instead, just let them
decompose/casefold to themselves.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
The sched_ext selftests is missing proper cross-compilation support, a
proper target entry, and out-of-tree build support.
When building the kselftest suite, e.g.:
make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \
TARGETS=sched_ext SKIP_TARGETS="" O=/output/foo \
-C tools/testing/selftests install
or:
make ARCH=arm64 LLVM=1 TARGETS=sched_ext SKIP_TARGETS="" \
O=/output/foo -C tools/testing/selftests install
The expectation is that the sched_ext is included, cross-built, the
correct toolchain is picked up, and placed into /output/foo.
In contrast to the BPF selftests, the sched_ext suite does not use
bpftool at test run-time, so it is sufficient to build bpftool for the
build host only.
Add ARCH, CROSS_COMPILE, OUTPUT, and TARGETS support to the sched_ext
selftest. Also, remove some variables that were unused by the
Makefile.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: David Vernet <void@manifault.com>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Added definitions for some pins which were missing from the
S32G2 SIUL2 pinctrl driver. These pins are used by the JTAG,
PFE and LLCE hardware modules.
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
Link: https://lore.kernel.org/20241002135920.3647322-2-andrei.stefanescu@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Bspec asks us to disable some compression trick on JSL. While the
bspec description is pretty vague it looks like this is some extra
trick for 10bpc+ CCS which presumably the ICL derived display engine
doesn't support.
Note that we aren't currently exposing 10bpc CCS scanout support,
but once that gets added this presumably becomes an issue.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918144445.5716-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
The arm64 uprobes code is broken for big-endian kernels as it doesn't
convert the in-memory instruction encoding (which is always
little-endian) into the kernel's native endianness before analyzing and
simulating instructions. This may result in a few distinct problems:
* The kernel may may erroneously reject probing an instruction which can
safely be probed.
* The kernel may erroneously erroneously permit stepping an
instruction out-of-line when that instruction cannot be stepped
out-of-line safely.
* The kernel may erroneously simulate instruction incorrectly dur to
interpretting the byte-swapped encoding.
The endianness mismatch isn't caught by the compiler or sparse because:
* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so
the compiler and sparse have no idea these contain a little-endian
32-bit value. The core uprobes code populates these with a memcpy()
which similarly does not handle endianness.
* While the uprobe_opcode_t type is an alias for __le32, both
arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[]
to the similarly-named probe_opcode_t, which is an alias for u32.
Hence there is no endianness conversion warning.
Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and
adding the appropriate __le32_to_cpu() conversions prior to consuming
the instruction encoding. The core uprobes copies these fields as opaque
ranges of bytes, and so is unaffected by this change.
At the same time, remove MAX_UINSN_BYTES and consistently use
AARCH64_INSN_SIZE for clarity.
Tested with the following:
| #include <stdio.h>
| #include <stdbool.h>
|
| #define noinline __attribute__((noinline))
|
| static noinline void *adrp_self(void)
| {
| void *addr;
|
| asm volatile(
| " adrp %x0, adrp_self\n"
| " add %x0, %x0, :lo12:adrp_self\n"
| : "=r" (addr));
| }
|
|
| int main(int argc, char *argv)
| {
| void *ptr = adrp_self();
| bool equal = (ptr == adrp_self);
|
| printf("adrp_self => %p\n"
| "adrp_self() => %p\n"
| "%s\n",
| adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL");
|
| return 0;
| }
.... where the adrp_self() function was compiled to:
| 00000000004007e0 <adrp_self>:
| 4007e0: 90000000 adrp x0, 400000 <__ehdr_start>
| 4007e4: 911f8000 add x0, x0, #0x7e0
| 4007e8: d65f03c0 ret
Before this patch, the ADRP is not recognized, and is assumed to be
steppable, resulting in corruption of the result:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0xffffffffff7e0
| NOT EQUAL
After this patch, the ADRP is correctly recognized and simulated:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| #
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
Fixes: 9842ceae9f ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The simulate_ldr_literal() code always loads a 64-bit quantity, and when
simulating a 32-bit load into a 'W' register, it discards the most
significant 32 bits. For big-endian kernels this means that the relevant
bits are discarded, and the value returned is the the subsequent 32 bits
in memory (i.e. the value at addr + 4).
Additionally, simulate_ldr_literal() and simulate_ldrsw_literal() use a
plain C load, which the compiler may tear or elide (e.g. if the target
is the zero register). Today this doesn't happen to matter, but it may
matter in future if trampoline code uses a LDR (literal) or LDRSW
(literal).
Update simulate_ldr_literal() and simulate_ldrsw_literal() to use an
appropriately-sized READ_ONCE() to perform the access, which avoids
these problems.
Fixes: 39a67d49ba ("arm64: kprobes instruction simulation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The simulate_ldr_literal() and simulate_ldrsw_literal() functions are
unsafe to use for uprobes. Both functions were originally written for
use with kprobes, and access memory with plain C accesses. When uprobes
was added, these were reused unmodified even though they cannot safely
access user memory.
There are three key problems:
1) The plain C accesses do not have corresponding extable entries, and
thus if they encounter a fault the kernel will treat these as
unintentional accesses to user memory, resulting in a BUG() which
will kill the kernel thread, and likely lead to further issues (e.g.
lockup or panic()).
2) The plain C accesses are subject to HW PAN and SW PAN, and so when
either is in use, any attempt to simulate an access to user memory
will fault. Thus neither simulate_ldr_literal() nor
simulate_ldrsw_literal() can do anything useful when simulating a
user instruction on any system with HW PAN or SW PAN.
3) The plain C accesses are privileged, as they run in kernel context,
and in practice can access a small range of kernel virtual addresses.
The instructions they simulate have a range of +/-1MiB, and since the
simulated instructions must itself be a user instructions in the
TTBR0 address range, these can address the final 1MiB of the TTBR1
acddress range by wrapping downwards from an address in the first
1MiB of the TTBR0 address range.
In contemporary kernels the last 8MiB of TTBR1 address range is
reserved, and accesses to this will always fault, meaning this is no
worse than (1).
Historically, it was theoretically possible for the linear map or
vmemmap to spill into the final 8MiB of the TTBR1 address range, but
in practice this is extremely unlikely to occur as this would
require either:
* Having enough physical memory to fill the entire linear map all the
way to the final 1MiB of the TTBR1 address range.
* Getting unlucky with KASLR randomization of the linear map such
that the populated region happens to overlap with the last 1MiB of
the TTBR address range.
... and in either case if we were to spill into the final page there
would be larger problems as the final page would alias with error
pointers.
Practically speaking, (1) and (2) are the big issues. Given there have
been no reports of problems since the broken code was introduced, it
appears that no-one is relying on probing these instructions with
uprobes.
Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW
(literal), limiting the use of simulate_ldr_literal() and
simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR
(literal) and LDRSW (literal) will be rejected as
arm_probe_decode_insn() will return INSN_REJECTED. In future we can
consider introducing working uprobes support for these instructions, but
this will require more significant work.
Fixes: 9842ceae9f ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add i2c support for the Congatec Board Controller.
The Board Controller has two i2c busses, a General Purpose bus and a Power
Management bus.
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-3-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add gpio support for the Congatec Board Controller.
This Board Controller has 14 GPIO pins.
The driver is probed by the Congatec Board Controller MFD driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-2-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
