Add core MFD driver for the Board Controller found on some Congatec SMARC
module. This Board Controller provides functions like watchdog, GPIO, and
I2C busses.
This commit adds support only for the conga-SA7 module.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-1-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Added colon in kernel-doc comment to fix the warning.
./include/drm/drm_drv.h:372: warning: Incorrect use of kernel-doc format: * @fbdev_probe
./include/drm/drm_drv.h:435: warning: Function parameter or struct member 'fbdev_probe' not described in 'drm_driver'
Signed-off-by: R Sundar <prosunofficial@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003023806.17537-1-prosunofficial@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
All callers treat 0 and 1 returned by expand_files() in the same way
now since the call in alloc_fd() had been made conditional. Just make
it return 0 on success and be done with it...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
->close_on_exec[] state is maintained only for opened descriptors;
as the result, anything that marks a descriptor opened has to
set its cloexec state explicitly.
As the result, all calls of __set_open_fd() are followed by
__set_close_on_exec(); might as well fold it into __set_open_fd()
so that cloexec state is defined as soon as the descriptor is
marked opened.
[braino fix folded]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Using the device-managed version allows to simplify clean-up in probe()
error path.
Additionally, this device-managed ensures proper cleanup, which helps to
resolve memory errors, page faults, btrfs going read-only, and btrfs
disk corruption.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Tested-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Tested-by: Richard <hobbes1069@gmail.com>
Tested-by: Skyler <skpu@pm.me>
Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Closes: https://lore.kernel.org/all/3b129b1f-8636-456a-80b4-0f6cce0eef63@hixontech.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219331
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There is a problem with simultaneous audio output to headphones and
speakers, and when headphones are turned off, the speakers also turn
off and do not turn them on.
However, it was found that if you boot linux immediately after windows,
there are no such problems. When comparing alsa-info, the only difference
is the different configuration of Node 0x1d:
working conf. (windows): Pin-ctls: 0x80: HP
not working (linux): Pin-ctls: 0xc0: OUT HP
This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the
described problem.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241009134248.662175-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
backlight_register_notifier and backlight_unregister_notifier have
been unused since commit 6cb634d0dc ("ACPI: video: Remove code to
unregister acpi_video backlight when a native backlight registers")
With those not being called, it means that the backlight_notifier
list is always empty.
Remove the functions, the list itself and the enum used in the
notifications.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20240919232758.639925-1-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
Commit 156a5bb89c ("leds: Move led_init_default_state_get() to the
global header") moved the only element leds-gpio required from the local
leds.h to its global counterpart. Drop the inclusion of the local leds.h
as it is no longer used.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_unused_leds_h-v1-5-46fbf41ed4ae@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Commit 156a5bb89c ("leds: Move led_init_default_state_get() to the
global header") moved the only element leds-gpio required from the local
leds.h to its global counterpart. Drop the inclusion of the local leds.h
as it is no longer used.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_unused_leds_h-v1-3-46fbf41ed4ae@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
A user reported that commit aa3998dbeb ("ata: libata-scsi: Disable scsi
device manage_system_start_stop") introduced a spin down + immediate spin
up of the disk both when entering and when resuming from hibernation.
This behavior was not there before, and causes an increased latency both
when entering and when resuming from hibernation.
Hibernation is done by three consecutive PM events, in the following order:
1) PM_EVENT_FREEZE
2) PM_EVENT_THAW
3) PM_EVENT_HIBERNATE
Commit aa3998dbeb ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") modified ata_eh_handle_port_suspend() to call
ata_dev_power_set_standby() (which spins down the disk), for both event
PM_EVENT_FREEZE and event PM_EVENT_HIBERNATE.
Documentation/driver-api/pm/devices.rst, section "Entering Hibernation",
explicitly mentions that PM_EVENT_FREEZE does not have to be put the device
in a low-power state, and actually recommends not doing so. Thus, let's not
spin down the disk on PM_EVENT_FREEZE. (The disk will instead be spun down
during the subsequent PM_EVENT_HIBERNATE event.)
This way, PM_EVENT_FREEZE will behave as it did before commit aa3998dbeb
("ata: libata-scsi: Disable scsi device manage_system_start_stop"), while
PM_EVENT_HIBERNATE will continue to spin down the disk.
This will avoid the superfluous spin down + spin up when entering and
resuming from hibernation, while still making sure that the disk is spun
down before actually entering hibernation.
Cc: stable@vger.kernel.org # v6.6+
Fixes: aa3998dbeb ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241008135843.1266244-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
After switching to the scoped variant, there is no longer need for a
jump to 'fwnode_release', as an immediate return is possible. Given that
the loop is called in the probe function, and it already uses
dev_err_probe(), the common "dev_err() + return" has been updated as
well.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-18-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error path.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-17-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error path.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-16-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
The error handling after 'err_put_child' has been moved to the only goto
that jumps to it (second device_for_each_child_node()), and the call to
fwnode_handle_put() has been removed accordingly.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-15-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
After switching to the scoped variant, there is no longer need for a
jump to 'err_child_out', as an immediate return is possible.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-14-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
After switching to the scoped variant, there is no longer need for a
jump to 'err', as an immediate return is possible.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-13-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error path.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-12-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
After switching to the scoped variant, there is no longer need for a
jump to 'err_node_out', as an immediate return is possible.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-11-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
After switching to the scoped variant, there is no longer need for a
jump to 'child_out', as an immediate return is possible.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-10-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
After switching to the scoped variant, there is no longer need for a
jump to 'child_out', as an immediate return is possible.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-9-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
After switching to the scoped variant, there is no longer need for a
jump to 'child_out', as an immediate return is possible.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-8-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-7-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
After switching to the scoped variant, there is no longer need for a
jump to 'err_child_out', as an immediate return is possible.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-6-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-5-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-4-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-3-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-2-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The device_for_each_child_node() macro requires explicit calls to
fwnode_handle_put() upon early exits to avoid memory leaks, and in
this case the error paths are handled after jumping to
'out_flash_realease', which misses that required call to
to decrement the refcount of the child node.
A more elegant and robust solution is using the scoped variant of the
loop, which automatically handles such early exits.
Fix the child node refcounting in the error paths by using
device_for_each_child_node_scoped().
Cc: stable@vger.kernel.org
Fixes: 679f865206 ("leds: Add mt6360 driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-1-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The manufacturing access to the PCH/SoC SPI device is traditionally
performed via userspace driver accessing registers via /dev/mem but due
to security concerns /dev/mem access is being much restricted, hence the
reason for utilizing dedicated Intel PCH/SoC SPI controller driver,
which is already implemented in the Linux kernel.
Intel PCH/SoC SPI controller protects the flash storage via two
mechanisms one is the via region protection registers and second via
BIOS lock. The BIOS locks only the BIOS regions usually 0 and/or 6.
The device always boots with BIOS lock set, but during manufacturing the
BIOS lock has to be lifted in order to enable the write access. This can
be done by passing "writeable=1" in the command line when the driver is
loaded. This "locked" state is exposed through new sysfs attributes
(intel_spi_locked, intel_spi_bios_locked).
Second, also the region protection status is exposed via sysfs attribute
(intel_spi_protected) as the manufacturing will need the both files in
order to validate that the device is properly sealed.
Includes code written by Tamar Mashiah.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20241009062244.2436793-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DT bindings documentation for the Everest-semi ES8323 codec.
Everest-semi ES8323 codec is a low-power mono audio codec with I2S
audio interface and I2C control.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/414f829342a7b0f9d02a291eb9fd355cbef50005.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The boot mapped ring buffer has its buffer mapped at a fixed location
found at boot up. It is not dynamic. It cannot grow or be expanded when
new CPUs come online.
Do not hook fixed memory mapped ring buffers to the CPU hotplug callback,
otherwise it can cause a crash when it tries to add the buffer to the
memory that is already fully occupied.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241008143242.25e20801@gandalf.local.home
Fixes: be68d63a13 ("ring-buffer: Add ring_buffer_alloc_range()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When using mutex_acquire_nest() with a nest_lock, lockdep refcounts the
number of acquired lockdep_maps of mutexes of the same class, and also
keeps a pointer to the first acquired lockdep_map of a class. That pointer
is then used for various comparison-, printing- and checking purposes,
but there is no mechanism to actively ensure that lockdep_map stays in
memory. Instead, a warning is printed if the lockdep_map is freed and
there are still held locks of the same lock class, even if the lockdep_map
itself has been released.
In the context of WW/WD transactions that means that if a user unlocks
and frees a ww_mutex from within an ongoing ww transaction, and that
mutex happens to be the first ww_mutex grabbed in the transaction,
such a warning is printed and there might be a risk of a UAF.
Note that this is only problem when lockdep is enabled and affects only
dereferences of struct lockdep_map.
Adjust to this by adding a fake lockdep_map to the acquired context and
make sure it is the first acquired lockdep map of the associated
ww_mutex class. Then hold it for the duration of the WW/WD transaction.
This has the side effect that trying to lock a ww mutex *without* a
ww_acquire_context but where a such context has been acquire, we'd see
a lockdep splat. The test-ww_mutex.c selftest attempts to do that, so
modify that particular test to not acquire a ww_acquire_context if it
is not going to be used.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241009092031.6356-1-thomas.hellstrom@linux.intel.com
Convert th1520_pinctrl_dt_node_to_map() to use a scoped iterator with
for_each_available_child_of_node_scoped(). As a result, there is no need
to call of_node_put() anymore. The put_child label has been renamed to
free_map which is now a more accurate description.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20241008-th1520-pinctrl-fixes-v3-3-5b60db446a49@tenstorrent.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Yisen Zhuang has left the company in September.
Jian Shen will be responsible for maintaining the
hns3/hns driver's code in the future,
so add Jian Shen to the hns3/hns driver's matainer list.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for the temperature sensor being available from
RTL8125B. Register information was taken from r8125 vendor driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
