This commit fixes several typographical errors in comments within
the driver/input directory. No functional changes are made.
Detected using codespell.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/20240926031457.3479350-1-yujiaoliang@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
For intel_wakeref_t, opaque is reasonable, but disguising the underlying
struct ref_tracker * as an unsigned long is not so great. Update the
typedef to remove one level of disguise.
Although the kernel coding style strongly discourages pointer typedefs,
it's a better alternative, and an incremental improvement on the status
quo. It provides much better type safety than an unsigned long could,
and prevents passing magic -1 instead of INTEL_WAKEREF_DEF. Moreover, it
provides a gradual path for replacing intel_wakeref_t with struct
ref_tracker * if desired.
As an extra safety measure, check for error pointers in
intel_ref_tracker_free() before passing them on to ref_tracker_free(),
to catch any mistakes with mock gt special wakeref value.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cca2b0631f816ad90461aa1bf4fe3f80c0e13464.1726680898.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use explicit casts to convert between intel_wakeref_t and unsigned long,
to not rely on intel_wakeref_t underlying type remaining unsigned long,
allowing us to change it as needed. (And yes, this is indeed preparation
for changing the typedef for intel_wakeref_t.)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9d2a2c2399e70f36e0d68d88136ac688f02988fe.1726680898.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a dedicated macro for the special mock gt wakeref value, with a cast
to intel_wakeref_t, instead of assuming you can assign or compare the
wakeref to -ENODEV directly.
Arguably the whole thing is a hack that should not exist, but at least
make it slightly less hacky.
Side note: If this value were to ever end up in
intel_ref_tracker_free(), it would wreak havoc.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1da887a6b4fe1ec45355571ea7b56d91fadf0af2.1726680898.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND is an int, defaulting to 250. When
the wakeref is non-zero, it's either -1 or a dynamically allocated
pointer, depending on CONFIG_DRM_I915_DEBUG_RUNTIME_PM. It's likely that
the code works by coincidence with the bitwise AND, but with
CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y, there's the off chance that the
condition evaluates to false, and intel_wakeref_auto() doesn't get
called. Switch to the intended logical AND.
v2: Use != to avoid clang -Wconstant-logical-operand (Nathan)
Fixes: ad74457a6b ("drm/i915/dgfx: Release mmap on rpm suspend")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org # v6.1+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> # v1
Link: https://patchwork.freedesktop.org/patch/msgid/643cc0a4d12f47fd8403d42581e83b1e9c4543c7.1726680898.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731123502.1145082-10-tzimmermann@suse.de
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731123502.1145082-9-tzimmermann@suse.de
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731123502.1145082-8-tzimmermann@suse.de
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731123502.1145082-7-tzimmermann@suse.de
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731123502.1145082-6-tzimmermann@suse.de
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731123502.1145082-5-tzimmermann@suse.de
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731123502.1145082-4-tzimmermann@suse.de
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731123502.1145082-3-tzimmermann@suse.de
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731123502.1145082-2-tzimmermann@suse.de
If the recv returns zero, or an error, then it doesn't matter if more
data has already been received for this buffer. A condition like that
should terminate the multishot receive. Rather than pass in the
collected return value, pass in whether to terminate or keep the recv
going separately.
Note that this isn't a bug right now, as the only way to get there is
via setting MSG_WAITALL with multishot receive. And if an application
does that, then -EINVAL is returned anyway. But it seems like an easy
bug to introduce, so let's make it a bit more explicit.
Link: https://github.com/axboe/liburing/issues/1246
Cc: stable@vger.kernel.org
Fixes: b3fdea6ecb ("io_uring: multishot recv")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to compute the number of pipes required.
This will depend on whether the joiner is required or is forced through
the debugfs. If no joiner is required the helper returns 1.
v2:
-Return 1 if no joiner is required. (Ville)
-Change the suffix from joined_pipes to num_pipes. (Ville)
-Use number of pipes while calculating joined_pipe masks and
max_dotclk. (Ville)
v3: Simplify and rename the helper to intel_dp_num_joined_pipes(). Ville
v4: Remove redundant 'fallthrough' statement. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926134322.3728021-5-ankit.k.nautiyal@intel.com
At the moment, the debugfs for joiner allows only to force enable/disable
pipe joiner for 2 pipes. Modify it to force join 'n' number of pipes,
where n is a valid pipe joiner configuration.
This will help in case of ultra joiner where 4 pipes are joined.
v2:
-Fix commit message to state that only valid joiner config can be
forced. (Suraj)
-Rename the identifiers to have INTEL_BIG/NONE_JOINER_PIPES. (Suraj)
v3:
-Avoid enum for joiner pipe counts, use bare numbers for better
readability. (Ville)
-Remove redundant prints from debugfs. (Ville)
v4: Return -EINVAL if joiner forced to an invalid value.
v5: Remove extra debug message. (Ville)
v6: Minor fix in switch case. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926134322.3728021-4-ankit.k.nautiyal@intel.com
Currently we support joiner only for DP encoder.
Do not create the debugfs for joiner if DP does not support the joiner.
This will also help avoiding cases where config has eDP MSO, with which
we do not support joiner.
v2: Check for intel_dp_has_joiner and avoid creating debugfs if not
supported. (Ville)
v3: Remove HAS_BIGJOINER check. (Ville)
v4: Reverse checks for connector type and intel_dp_has_joiner(). (Ville)
v5: Drop the local variable intel_dp and use intel_attached_dp() directly.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926134322.3728021-3-ankit.k.nautiyal@intel.com
Bigjoiner needs DSC, but DSC might be disabled on some platforms.
The platform check itself is not sufficient, so add a check for
DSC to reflect that.
v2: Modify the commit message to address the DSC fuse case.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926134322.3728021-2-ankit.k.nautiyal@intel.com
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://patch.msgid.link/20240930112121.95324-5-Julia.Lawall@inria.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The headset push button cannot work properly in case of the ALC257.
This patch reverted the previous commit to correct the side effect.
Fixes: ef9718b3d5 ("ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7")
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://patch.msgid.link/20240930105039.3473266-1-oder_chiou@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Khadas Edge2 uses the PCI-e Ampak AP6275P 2T2R Wi-Fi 6 module. The
pcie@0 node can be used as Bridge1, so the wifi@0 node is used as a
device under the Bridge1.
Co-developed-by: Muhammed Efe Cetin <efectn@protonmail.com>
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Link: https://lore.kernel.org/r/20240910-dts-v14-1-82b39bd91257@wesion.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the Mali GPU in the Turing RK1.
This patch also sets the external GPU voltage regulator in the RK806-1
to "always-on" because it is necessary for this regulator to be active
when enabling the GPU power domain or the kernel will fail with:
rockchip-pm-domain fd8d8000.power-management:power-controller: \
failed to set domain 'gpu', val=0
rockchip-pm-domain fd8d8000.power-management:power-controller: \
failed to get ack on domain 'gpu', val=0x1bffff
...followed by a panic when it attempts to access unavailable QoS
registers.
Since there is currently no `domain-supply` or similar to express this
dependency, the only way to ensure that the regulator is never off when
the GPU power domain is brought up is to ensure that the regulator is
never off.
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20240912025034.180233-6-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds thermal trip points and cooling maps to the Turing RK1
in order to enable automatic control of the external PWM fan. The fan is
not active below 45C, as the heatsink alone can generally keep the chip
in this temperature region at idle load. This cooling profile errs on
the side of quietness, since the RK1 is commonly deployed in a Turing
Pi 2 clusterboard alongside three others, with additional cooling
provided at the chassis level.
Helped-by: soxrok2212 <soxrok2212@gmail.com>
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20240912025034.180233-4-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The PCIe 3 PHY in the RK3588 requires a running external reference clock
for both external bus transfers and some internal PIPE operations.
Without this clock, the PCIe3 controller fails to initialize and ignores
DBI transactions indefinitely, which stalls the Linux boot process.
On most RK3588 boards, this is evidently not an issue. But on some "SoM"
designs (Turing RK1, Mixtile Core 3588E, ArmSoM AIM7, to name a few),
this clock is only provided when the CLKREQ# signal is asserted.
The PCIe 3 PHY generates the CLKREQ# signal when it knows it needs the
reference clock for proper operation. Unfortunately, the current DT for
Turing RK1 does not mux out these low-speed signals, resulting in broken
boots and potentially other issues.
This patch, following the previous one that split up the PCIe pinctrls,
resolves this problem for Turing RK1 by explicitly muxing all of the
signals needed for PCIe 2 and 3 support.
Cc: Jonathan Bennett <jbennett@incomsystems.biz>
Fixes: 2806a69f3f ("arm64: dts: rockchip: Add Turing RK1 SoM support")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20240912025034.180233-3-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently, the Turing RK1 board reboots when told to power off.
Resolve this by designating the RK806 as the system power controller, so
that the relevant driver can handle system shutdown requests.
Fixes: 2806a69f3f ("arm64: dts: rockchip: Add Turing RK1 SoM support")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20240912180148.205957-1-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This reverts commit 087913e0ba.
It turned out that the original code was correct since the rq can only
change when there is no armed job for an entity.
This change here broke the logic since we only incremented the counter
for the first job, so revert it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930131451.536150-1-christian.koenig@amd.com
Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240902122014.905237-1-liaochen4@huawei.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The SBDF of the target CXL 2.0 compliant root port is required to inject a CXL
protocol error as per ACPI 6.5. The SBDF given has to be in the
following format:
31 24 23 16 15 11 10 8 7 0
+-------------------------------------------------+
| segment | bus | device | function | reserved |
+-------------------------------------------------+
The SBDF calculated in cxl_dport_get_sbdf() doesn't account for
the reserved bits currently, causing the wrong SBDF to be used.
Fix said calculation to properly shift the SBDF.
Without this fix, error injection into CXL 2.0 root ports through the
CXL debugfs interface (<debugfs>/cxl) is broken. Injection
through the legacy interface (<debugfs>/apei/einj/) will still work
because the SBDF is manually provided by the user.
Fixes: 12fb28ea6b ("EINJ: Add CXL error type support")
Signed-off-by: Ben Cheatham <Benjamin.Cheatham@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Reviewed-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Link: https://patch.msgid.link/20240927163428.366557-1-Benjamin.Cheatham@amd.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
data->asserted will be NULL on JH7110 SoC since commit 82327b127d
("reset: starfive: Add StarFive JH7110 reset driver") was added. Add
the judgment condition to avoid errors when calling reset_control_status
on JH7110 SoC.
Fixes: 82327b127d ("reset: starfive: Add StarFive JH7110 reset driver")
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Acked-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20240925112442.1732416-1-changhuang.liang@starfivetech.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20240909061258.2246292-1-yanzhen@vivo.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On a few platforms such as TI's AM69 device, disable_irq() fails to keep
track of the interrupts that happen between disable_irq() and
enable_irq() and those interrupts are missed. Use the ->irq_unmask() and
->irq_mask() methods instead of ->irq_enable() and ->irq_disable() to
correctly keep track of edges when disable_irq is called.
This solves the issue of disable_irq() not working as expected on such
platforms.
Fixes: 23265442b0 ("ARM: davinci: irq_data conversion.")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Acked-by: Keerthy <j-keerthy@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240828133207.493961-1-parth105105@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since commit f79dc03fe6 ("kconfig: refactor choice value calculation"),
Kconfig for ARCH=powerpc may result in an infinite loop. This occurs
because there are two entries for POWERPC64_CPU in a choice block.
If the same symbol appears twice in a choice block, the ->choice_link
node is added twice to ->choice_members, resulting a corrupted linked
list.
A simple test case is:
choice
prompt "choice"
config A
bool "A"
config B
bool "B 1"
config B
bool "B 2"
endchoice
Running 'make defconfig' results in an infinite loop.
One solution is to replace the current two entries:
config POWERPC64_CPU
bool "Generic (POWER5 and PowerPC 970 and above)"
depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN
select PPC_64S_HASH_MMU
config POWERPC64_CPU
bool "Generic (POWER8 and above)"
depends on PPC_BOOK3S_64 && CPU_LITTLE_ENDIAN
select ARCH_HAS_FAST_MULTIPLIER
select PPC_64S_HASH_MMU
select PPC_HAS_LBARX_LHARX
with the following single entry:
config POWERPC64_CPU
bool "Generic 64 bit powerpc"
depends on PPC_BOOK3S_64
select ARCH_HAS_FAST_MULTIPLIER if CPU_LITTLE_ENDIAN
select PPC_64S_HASH_MMU
select PPC_HAS_LBARX_LHARX if CPU_LITTLE_ENDIAN
In my opinion, the latter looks cleaner, but PowerPC maintainers may
prefer to display different prompts depending on CPU_LITTLE_ENDIAN.
For now, this commit fixes the issue in Kconfig, restoring the original
behavior. I will reconsider whether such a use case is worth supporting.
Fixes: f79dc03fe6 ("kconfig: refactor choice value calculation")
Reported-by: Marco Bonelli <marco@mebeim.net>
Closes: https://lore.kernel.org/all/1763151587.3581913.1727224126288@privateemail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit aab94339cd ("of: Add support for linking device tree blobs
into vmlinux") introduced a mechanism to embed DTBs into vmlinux.
Initially, it was used for wrapping boot DTBs in arch/*/boot/dts/, but
it is now reused for more generic purposes, such as testing.
Built-in DTBs are discarded because KERNEL_DTB() is part of INIT_DATA,
as defined in include/asm-generic/vmlinux.lds.h.
This has not been an issue so far because OF unittests are triggered
during boot, as defined by late_initcall(of_unittest).
However, the recent clk KUnit test additions have caused problems
because KUnit can execute test suites after boot.
For example:
# echo > /sys/kernel/debug/kunit/clk_register_clk_parent_data_device/run
This command triggers a stack trace because built-in DTBs have already
been freed.
While it is possible to move such test suites from kunit_test_suites to
kunit_test_init_section_suites, it would be preferable to avoid usage
limitations.
This commit moves non-boot built-in DTBs to the .rodata section. Since
these generic DTBs are looked up by name, they do not need to be placed
in the special .dtb.init.rodata section.
Boot DTBs should remain in .dtb.init.rodata because the arch boot code
generally does not know the DT name, thus it uses the __dtb_start symbol
to locate it.
This separation also ensures that the __dtb_start symbol references the
boot DTB. Currently, the .dtb.init.rodata is a mixture of both boot and
non-boot DTBs. The __dtb_start symbol must be followed by the boot DTB,
but we currently rely on the link order (i.e., the order in Makefiles),
which is very fragile.
The implementation is kind of cheesy; the section is .dtb.init.rodata
when $(obj) starts with arch/$(SRCARCH)/boot/dts, and .rodata section
otherwise. This will be refactored later.
Fixes: 5c9dd72d83 ("of: Add a KUnit test for overlays and test managed APIs")
Fixes: 5776526beb ("clk: Add KUnit tests for clk fixed rate basic type")
Fixes: 274aff8711 ("clk: Add KUnit tests for clks registered with struct clk_parent_data")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Javier Carrasco <javier.carrasco.cruz@gmail.com> says:
This series fixes an error path where the reference of a child node is
not decremented upon early return. When at it, a trivial comma/semicolon
substitution I found by chance has been added to improve code clarity.
Link: https://lore.kernel.org/r/20240926-intel-pinctrl-platform-scoped-v1-0-5ee4c936eea3@gmail.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Substitute the comma with a semicolon in the `ncommunities` assignment
for better readability and consistency with common C coding style.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The device_for_each_child_node() loop requires calls to
fwnode_handle_put() upon early returns to decrement the refcount of
the child node and avoid leaking memory if that error path is triggered.
There is one early returns within that loop in
intel_platform_pinctrl_prepare_community(), but fwnode_handle_put() is
missing.
Instead of adding the missing call, the scoped version of the loop can
be used to simplify the code and avoid mistakes in the future if new
early returns are added, as the child node is only used for parsing, and
it is never assigned.
Cc: stable@vger.kernel.org
Fixes: c5860e4a27 ("pinctrl: intel: Add a generic Intel pin control platform driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for a call to fwnode_handle_put() in the error path.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Currently, there is no terminator entry for exynosautov920_cmu_of_match,
hence facing below KASAN warning,
BUG: KASAN: global-out-of-bounds in of_match_node+0x120/0x13c
Read of size 1 at addr ffffffe31cc9e628 by task swapper/0/1
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0+ #334
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x90/0xd0
print_report+0x1f4/0x5b4
kasan_report+0xc8/0x110
__asan_report_load1_noabort+0x20/0x2c
of_match_node+0x120/0x13c
of_match_device+0x70/0xb4
platform_match+0xa0/0x25c
__device_attach_driver+0x7c/0x2d4
bus_for_each_drv+0x100/0x188
__device_attach+0x174/0x364
device_initial_probe+0x14/0x20
bus_probe_device+0x128/0x158
device_add+0xb3c/0x10fc
of_device_add+0xdc/0x150
of_platform_device_create_pdata+0x120/0x20c
of_platform_bus_create+0x2bc/0x620
of_platform_populate+0x58/0x108
of_platform_default_populate_init+0x100/0x120
do_one_initcall+0x110/0x788
kernel_init_freeable+0x44c/0x61c
kernel_init+0x24/0x1e4
ret_from_fork+0x10/0x20
The buggy address belongs to the variable:
exynosautov920_cmu_of_match+0xc8/0x2c80
Add a dummy terminator entry at the end to assist of_match_node() in
traversing up to the terminator entry without accessing an
out-of-boundary index.
Fixes: 485e13fe2f ("clk: samsung: add top clock support for ExynosAuto v920 SoC")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240927102104.3268790-1-ruanjinjie@huawei.com
[krzk: drop trailing comma]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The existing `CondVar` abstraction is a wrapper around
`wait_queue_head`, but it does not support all use-cases of the C
`wait_queue_head` type. To be specific, a `CondVar` cannot be registered
with a `struct poll_table`. This limitation has the advantage that you
do not need to call `synchronize_rcu` when destroying a `CondVar`.
However, we need the ability to register a `poll_table` with a
`wait_queue_head` in Rust Binder. To enable this, introduce a type
called `PollCondVar`, which is like `CondVar` except that you can
register a `poll_table`. We also introduce `PollTable`, which is a safe
wrapper around `poll_table` that is intended to be used with
`PollCondVar`.
The destructor of `PollCondVar` unconditionally calls `synchronize_rcu`
to ensure that the removal of epoll waiters has fully completed before
the `wait_queue_head` is destroyed.
That said, `synchronize_rcu` is rather expensive and is not needed in
all cases: If we have never registered a `poll_table` with the
`wait_queue_head`, then we don't need to call `synchronize_rcu`. (And
this is a common case in Binder - not all processes use Binder with
epoll.) The current implementation does not account for this, but if we
find that it is necessary to improve this, a future patch could store a
boolean next to the `wait_queue_head` to keep track of whether a
`poll_table` has ever been registered.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915-alice-file-v10-8-88484f7a3dcf@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Adds a wrapper around `kuid_t` called `Kuid`. This allows us to define
various operations on kuids such as equality and current_euid. It also
lets us provide conversions from kuid into userspace values.
Rust Binder needs these operations because it needs to compare kuids for
equality, and it needs to tell userspace about the pid and uid of
incoming transactions.
To read kuids from a `struct task_struct`, you must currently use
various #defines that perform the appropriate field access under an RCU
read lock. Currently, we do not have a Rust wrapper for rcu_read_lock,
which means that for this patch, there are two ways forward:
1. Inline the methods into Rust code, and use __rcu_read_lock directly
rather than the rcu_read_lock wrapper. This gives up lockdep for
these usages of RCU.
2. Wrap the various #defines in helpers and call the helpers from Rust.
This patch uses the second option. One possible disadvantage of the
second option is the possible introduction of speculation gadgets, but
as discussed in [1], the risk appears to be acceptable.
Of course, once a wrapper for rcu_read_lock is available, it is
preferable to use that over either of the two above approaches.
Link: https://lore.kernel.org/all/202312080947.674CD2DC7@keescook/ [1]
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915-alice-file-v10-7-88484f7a3dcf@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Allow for the creation of a file descriptor in two steps: first, we
reserve a slot for it, then we commit or drop the reservation. The first
step may fail (e.g., the current process ran out of available slots),
but commit and drop never fail (and are mutually exclusive).
This is needed by Rust Binder when fds are sent from one process to
another. It has to be a two-step process to properly handle the case
where multiple fds are sent: The operation must fail or succeed
atomically, which we achieve by first reserving the fds we need, and
only installing the files once we have reserved enough fds to send the
files.
Fd reservations assume that the value of `current` does not change
between the call to get_unused_fd_flags and the call to fd_install (or
put_unused_fd). By not implementing the Send trait, this abstraction
ensures that the `FileDescriptorReservation` cannot be moved into a
different process.
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915-alice-file-v10-6-88484f7a3dcf@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add an abstraction for viewing the string representation of a security
context.
This is needed by Rust Binder because it has a feature where a process
can view the string representation of the security context for incoming
transactions. The process can use that to authenticate incoming
transactions, and since the feature is provided by the kernel, the
process can trust that the security context is legitimate.
This abstraction makes the following assumptions about the C side:
* When a call to `security_secid_to_secctx` is successful, it returns a
pointer and length. The pointer references a byte string and is valid
for reading for that many bytes.
* The string may be referenced until `security_release_secctx` is
called.
* If CONFIG_SECURITY is set, then the three methods mentioned in
rust/helpers are available without a helper. (That is, they are not a
#define or `static inline`.)
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915-alice-file-v10-5-88484f7a3dcf@google.com
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
