The 'cnt' is used to show how many pending frames are processed, and the
debug code has been removed, so removing 'cnt' is safe.
Otherwise, clang warns:
core/rtw_recv.c:2030:7: warning:
variable 'cnt' set but not used [-Wunused-but-set-variable]
2030 | int cnt = 0;
| ^
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240913002815.5149-4-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The efuseValue is to store value from register EFUSE_CTRL, and set control
bits including address and write bit. This is no need for RTL8723BS, so
the consumer has been removed. Thus, remove these unused codes are safe.
Otherwiese, clang warns:
rtw_efuse.c:285:6: warning:
variable 'efuseValue' set but not used [-Wunused-but-set-variable]
285 | u32 efuseValue;
| ^
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240913002815.5149-3-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The drvinfo_sz is a size of hardware generated data putting in front of
real RX data. The functions r8712_rxcmd_event_hdl() and recvbuf2recvframe()
have its own parsing code to get drvinfo_sz to access real RX data, so
removing this unused drvinfo_sz is safe.
Otherwise, clang report:
rtl8712_recv.c:139:6: warning:
variable 'drvinfo_sz' set but not used [-Wunused-but-set-variable]
139 | u16 drvinfo_sz;
| ^
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240913002815.5149-2-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is safer to put macro arguments in parentheses. This way, accidental
operator precedence issues can be avoided.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240911180149.14474-1-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change improves code readability and ensures consistent indentation.
Reported by `checkpatch.pl`:
WARNING: spaces should not be used before a tab for indentation.
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-9-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change enhances readability and conforms to the standard commenting
style in the kernel.
Reported by `checkpatch.pl`:
WARNING: trailing `*/` should be on a separate line.
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-8-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change improves code readability and maintains consistency with the
kernel's coding guidelines.
Reported by `checkpatch.pl`:
WARNING: please, no spaces at the start of a line
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-7-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change ensures consistent formatting of the struct declaration.
Improves code readability.
Reported by `checkpatch.pl`:
WARNING: please, no spaces at the start of a line
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-6-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change ensures that the code is properly indented and easy to follow.
Reported by `checkpatch.pl`:
WARNING: please, use tabs instead of spaces for indentation.
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-5-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This improves code readability by ensuring consistent formatting.
Reported by `checkpatch.pl`:
WARNING: switch blocks should be indented with a single tab.
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-4-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change ensures proper formatting for better readability and
maintainability.
Reported by `checkpatch.pl`:
WARNING: switch and case statements should be indented with tabs.
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-3-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change improves code readability and consistency with the rest of
the kernel codebase.
Reported by `checkpatch.pl`:
WARNING: open brace '{' following function definitions or control
statements should be on the next line.
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-2-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240912031731.2211698-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the FW crashes, L2 driver gets notified and it notifies
the RoCE driver. Currently driver doesn't re-initialize the
device. Add support for re-initialize the RoCE device.
RoCE device is removed and re-attached in the ulp_stop and
ulp_start respectively. The recovery logic expects the RoCE
driver to be registered with L2 driver while its being removed.
So the driver avoids unregistering with L2 driver in the
recovery path.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1726027710-2292-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Adding and removing device need to be handled from multiple contexts
when Firmware error recovery is supported. So group all the add and remove
operations to add_device and remove_device function.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1726027710-2292-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
While registering with the L2 for ULP operations, use the
aux device pointer as the handle. Aux device has
the data bnxt_re_en_dev_info, which is used to
store required information for the bnxt_re_suspend
and bnxt_re_resume functions.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1726027710-2292-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
rdev will be destroyed and recreated during the FW error
recovery scenarios. So to keep the state, if any, use an
en_info structure which gets created/freed based on auxiliary
device initialization/de-initialization.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1726027710-2292-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Extend the "rdma sys" command to display whether RDMA
monitoring is supported.
RDMA monitoring is not supported in mlx4 because it does
not use the ib_device_set_netdev() API, which sends the
RDMA events.
Example output for kernel where monitoring is supported:
$ rdma sys show
netns shared privileged-qkey off monitor on copy-on-fork on
Example output for kernel where monitoring is not supported:
$ rdma sys show
netns shared privileged-qkey off monitor off copy-on-fork on
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-8-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduce a new netlink command to allow rdma event monitoring.
The rdma events supported now are IB device
registration/unregistration and net device attachment/detachment.
Example output of rdma monitor and the commands which trigger
the events:
$ rdma monitor
$ rmmod mlx5_ib
[UNREGISTER] dev 1 rocep8s0f1
[UNREGISTER] dev 0 rocep8s0f0
$ modprobe mlx5_ib
[REGISTER] dev 2 mlx5_0
[NETDEV_ATTACH] dev 2 mlx5_0 port 1 netdev 4 eth2
[REGISTER] dev 3 mlx5_1
[NETDEV_ATTACH] dev 3 mlx5_1 port 1 netdev 5 eth3
$ devlink dev eswitch set pci/0000:08:00.0 mode switchdev
[UNREGISTER] dev 2 rocep8s0f0
[REGISTER] dev 4 mlx5_0
[NETDEV_ATTACH] dev 4 mlx5_0 port 30 netdev 4 eth2
$ echo 4 > /sys/class/net/eth2/device/sriov_numvfs
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 2 netdev 7 eth4
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 3 netdev 8 eth5
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 4 netdev 9 eth6
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 5 netdev 10 eth7
[REGISTER] dev 5 mlx5_0
[NETDEV_ATTACH] dev 5 mlx5_0 port 1 netdev 11 eth8
[REGISTER] dev 6 mlx5_0
[NETDEV_ATTACH] dev 6 mlx5_0 port 1 netdev 12 eth9
[REGISTER] dev 7 mlx5_0
[NETDEV_ATTACH] dev 7 mlx5_0 port 1 netdev 13 eth10
[REGISTER] dev 8 mlx5_0
[NETDEV_ATTACH] dev 8 mlx5_0 port 1 netdev 14 eth11
$ echo 0 > /sys/class/net/eth2/device/sriov_numvfs
[UNREGISTER] dev 5 rocep8s0f0v0
[UNREGISTER] dev 6 rocep8s0f0v1
[UNREGISTER] dev 7 rocep8s0f0v2
[UNREGISTER] dev 8 rocep8s0f0v3
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 2
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 3
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 4
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 5
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-7-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The IB layer provides a common interface to store and get net
devices associated to an IB device port (ib_device_set_netdev()
and ib_device_get_netdev()).
Previously, mlx5_ib stored and managed the associated net devices
internally.
Replace internal net device management in mlx5_ib with
ib_device_set_netdev() when attaching/detaching a net device and
ib_device_get_netdev() when retrieving the net device.
Export ib_device_get_netdev().
For mlx5 representors/PFs/VFs and lag creation we replace the netdev
assignments with the IB set/get netdev functions.
In active-backup mode lag the active slave net device is stored in the
lag itself. To assure the net device stored in a lag bond IB device is
the active slave we implement the following:
- mlx5_core: when modifying the slave of a bond we send the internal driver event
MLX5_DRIVER_EVENT_ACTIVE_BACKUP_LAG_CHANGE_LOWERSTATE.
- mlx5_ib: when catching the event call ib_device_set_netdev()
This patch also ensures the correct IB events are sent in switchdev lag.
While at it, when in multiport eswitch mode, only a single IB device is
created for all ports. The said IB device will receive all netdev events
of its VFs once loaded, thus to avoid overwriting the mapping of PF IB
device to PF netdev, ignore NETDEV_REGISTER events if the ib device has
already been mapped to a netdev.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-6-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The caller of ib_device_get_netdev() relies on its result to accurately
match a given netdev with the ib device associated netdev.
ib_device_get_netdev returns NULL when the IB device associated
netdev is unregistering, preventing the caller of matching netdevs properly.
Thus, remove this optimization and return the netdev even if
it is undergoing unregistration, allowing matching by the caller.
This change ensures proper netdev matching and reference count handling
by the caller of ib_device_get_netdev/ib_device_set_netdev API.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-5-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
phys_port_cnt of the IB device must be initialized before calling
ib_device_set_netdev().
Previously, phys_port_cnt was initialized in the mlx5_ib init function.
Remove this initialization to allow setting it separately, providing
the flexibility to call ib_device_set_netdev before registering the
IB device.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-4-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Report the upper device's state as the RDMA port state only in RoCE LAG or
switchdev LAG.
Fixes: 27f9e0ccb6 ("net/mlx5: Lag, Add single RDMA device in multiport mode")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-3-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Check if RoCE LAG is active before calling the LAG layer for netdev.
This clarifies if LAG is active. No behavior changes with this patch.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-2-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Consider also the query_vuid cap before enabling the data_direct
functionality.
This may prevent a syndrome from the FW in case the query_vuid command
is not supported. (e.g. migratable VF)
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Gal Shalom <galshalom@nvidia.com>
Link: https://patch.msgid.link/274c4f6f1ac0b1078243dd296695a49dbe58e7d1.1725907637.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When running over new FW that supports the new memory scheme ODP, set
the cap in the FW to signal the FW we are working in the new scheme.
In the memory scheme ODP the per_transport_service capabilities are RO
for the driver so we skip their setting.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-9-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
config dependency fix for stm, a syncobj leak fix, and two iommu fixes
for tegra and rockchip.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZuKq/QAKCRAnX84Zoj2+
djX/AX9yH6TTbCOGSJ2BF6No8RXE0kNOi/AaS0dr+WuUetXsMcjQ2g4ttbMVKh/o
RefF0n8BgN5BWitAA+rkqRWjCPxUPGb6kjPamPp/YEFTcEv/8nvnr344ZPEV6jXe
7dv+h319Dg==
=Qvnm
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2024-09-12' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
An off-by-one fix for the CMA DMA-buf heap, An init fix for nouveau, a
config dependency fix for stm, a syncobj leak fix, and two iommu fixes
for tegra and rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912-phenomenal-upbeat-grouse-a26781@houat
When CONFIG_SYSFS is not set, the kernel fails to compile:
net/core/page_pool_user.c:368:45: error: implicit declaration of function 'get_netdev_rx_queue_index' [-Werror=implicit-function-declaration]
368 | if (pool->slow.queue_idx == get_netdev_rx_queue_index(rxq)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
When CONFIG_SYSFS is not set, get_netdev_rx_queue_index() is not defined
as well.
Fix by removing the ifdef around get_netdev_rx_queue_index(). It is not
needed anymore after commit e817f85652 ("xdp: generic XDP handling of
xdp_rxq_info") removed most of the CONFIG_SYSFS ifdefs.
Fixes: 0f92140468 ("memory-provider: dmabuf devmem memory provider")
Cc: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20240913032824.2117095-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed says:
====================
Misc updates to mlx5 driver:
1) Fix HW steering ret value and align with kdoc
2) Flow steering cleanups and add support for no append at software level
3) Support for sync reset using hot reset
4) RX SW counter to cover no-split events in header/data split mode
5) Make affinity of SFs configurable
====================
Link: https://patch.msgid.link/20240911201757.1505453-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_free_rq previously cleaned resources in an order that was not the
reverse of the resource allocation order in mlx5e_alloc_rq.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When SHAMPO can't identify the protocol/header of a packet, it will
yield a packet that is not split - all the packet is in the data part.
Count this value in packets and bytes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-15-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new command status MLX5_CMD_STAT_NOT_READY to handle cases
where the firmware is not ready.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20240911201757.1505453-14-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SFs didn't allow to configure IRQ affinity for its vectors. Allow users
to configure the affinity of the SFs irqs.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20240911201757.1505453-13-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sync reset request is nacked by the driver when PCIe bridge connected to
mlx5 device has HotPlug interrupt enabled. However, when using reset
method of hot reset this check can be skipped as Hotplug is supported on
this reset method.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On device that supports sync reset for firmware activate using hot
reset, the driver queries the required reset method while handling the
sync reset request. If the required reset method is hot reset, the
driver will use pci_reset_bus() to reset the PCI link instead of the
link toggle.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New devices with new FW can support sync reset for firmware activate
using hot reset. Add capability for supporting it and add MFRL field to
query from FW which type of PCI reset method to use while handling sync
reset events.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-10-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Native capability for some steering engines lacks support for adding an
additional match with the same value to the same flow group. To accommodate
the NO APPEND flag in these scenarios, we include the new rule in the
existing flow table entry (fte) without immediate hardware commitment. When
a request is made to delete the corresponding hardware rule, we then commit
the pending rule to hardware.
Only one pending rule is supported because NO_APPEND is primarily used
during replacement operations. In this scenario, a rule is initially added.
When it needs replacement, the new rule is added with NO_APPEND set. Only
after the insertion of the new rule is the original rule deleted.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a dedicated structure to encapsulate flow context, actions,
destination count, and modification mask. This refactoring lays the
groundwork for forthcoming patches that will integrate the NO APPEND
software logic. Future modifications should focus solely on these
specific fields.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Counter is in struct fte, remove it.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Downstream patches will need this as we might not want to reset
it when a pending rule is connected to the FTE.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-6-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As preparation for HW Steering support, where the function
get_root_namespace() is needed to get root FDB, make it an API function
and rename it to mlx5_get_root_namespace().
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20240911201757.1505453-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As preparation for HW steering support in fs core level, move SW
steering helper function that can be reused by HW steering to fs_cmd.h.
The function mlx5_fs_cmd_is_fw_term_table() checks if a flow table is a
flow steering termination table and so should be handled by FW steering.
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-4-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixed all the '-ret' returns in error flow of functions to 'ret',
as the internal functions are already returning negative error values
(e.g. -EINVAL)
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changed all the functions comments to adhere with kernel-doc formatting.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jinjie Ruan says:
====================
net: Use IRQF_NO_AUTOEN flag in request_irq()
As commit cbe16f35be ("genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()")
said, reqeust_irq() and then disable_irq() is unsafe.
IRQF_NO_AUTOEN flag can be used by drivers to request_irq(). It prevents
the automatic enabling of the requested interrupt in the same safe way.
With that the usage can be simplified and corrected.
====================
Link: https://patch.msgid.link/20240911094445.1922476-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240911094445.1922476-4-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: bbb96dc7fa ("enetc: Factor out the traffic start/stop procedures")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240911094445.1922476-3-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240911094445.1922476-2-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault says:
====================
bareudp: Pull inner IP header on xmit/recv.
Bareudp accesses the inner IP header in its xmit and recv paths.
However it doesn't ensure that this header is part of skb->head.
Both vxlan and geneve have received fixes for similar problems
in the past. This series fixes bareudp using the same approach.
====================
Link: https://patch.msgid.link/cover.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
