Both bareudp_xmit_skb() and bareudp6_xmit_skb() read their skb's inner
IP header to get its ECN value (with ip_tunnel_ecn_encap()). Therefore
we need to ensure that the inner IP header is part of the skb's linear
data.
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/267328222f0a11519c6de04c640a4f87a38ea9ed.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bareudp reads the inner IP header to get the ECN value. Therefore, it
needs to ensure that it's part of the skb's linear data.
This is similar to the vxlan and geneve fixes for that same problem:
* commit f778941913 ("vxlan: Pull inner IP header in vxlan_rcv().")
* commit 1ca1ba465e ("geneve: make sure to pull inner header in
geneve_rx()")
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/5205940067c40218a70fbb888080466b2fc288db.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZuH9UQAKCRDbK58LschI
g0/zAP99WOcCBp1M/jSTUOba230+eiol7l5RirDEA6wu7TqY2QEAuvMG0KfCCpTI
I0WqStrK1QMbhwKPodJC1k+17jArKgw=
=jfMU
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-09-11
We've added 12 non-merge commits during the last 16 day(s) which contain
a total of 20 files changed, 228 insertions(+), 30 deletions(-).
There's a minor merge conflict in drivers/net/netkit.c:
00d066a4d4 ("netdev_features: convert NETIF_F_LLTX to dev->lltx")
d966087948 ("netkit: Disable netpoll support")
The main changes are:
1) Enable bpf_dynptr_from_skb for tp_btf such that this can be used
to easily parse skbs in BPF programs attached to tracepoints,
from Philo Lu.
2) Add a cond_resched() point in BPF's sock_hash_free() as there have
been several syzbot soft lockup reports recently, from Eric Dumazet.
3) Fix xsk_buff_can_alloc() to account for queue_empty_descs which
got noticed when zero copy ice driver started to use it,
from Maciej Fijalkowski.
4) Move the xdp:xdp_cpumap_kthread tracepoint before cpumap pushes skbs
up via netif_receive_skb_list() to better measure latencies,
from Daniel Xu.
5) Follow-up to disable netpoll support from netkit, from Daniel Borkmann.
6) Improve xsk selftests to not assume a fixed MAX_SKB_FRAGS of 17 but
instead gather the actual value via /proc/sys/net/core/max_skb_frags,
also from Maciej Fijalkowski.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
sock_map: Add a cond_resched() in sock_hash_free()
selftests/bpf: Expand skb dynptr selftests for tp_btf
bpf: Allow bpf_dynptr_from_skb() for tp_btf
tcp: Use skb__nullable in trace_tcp_send_reset
selftests/bpf: Add test for __nullable suffix in tp_btf
bpf: Support __nullable argument suffix for tp_btf
bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcv
selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knob
xsk: Bump xsk_queue::queue_empty_descs in xp_can_alloc()
tcp_bpf: Remove an unused parameter for bpf_tcp_ingress()
bpf, sockmap: Correct spelling skmsg.c
netkit: Disable netpoll support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://patch.msgid.link/20240911211525.13834-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a LIBBPF_API function to retrieve the token_fd from a bpf_object.
Without this accessor, if user needs a token FD they have to get it
manually via bpf_token_create, even though a token might have been
already created by bpf_object__load.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240913001858.3345583-1-ihor.solodrai@pm.me
Willem de Bruijn says:
====================
selftests/net: packetdrill: netns and two imports
From: Willem de Bruijn <willemb@google.com>
1/3: run in nets, as discussed, and add missing CONFIGs
2/3: import tcp/zerocopy
3/3: import tcp/slow_start
====================
Link: https://patch.msgid.link/20240912005317.1253001-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Same import process as previous tests.
Also add CONFIG_NET_SCH_FQ to config, as one test uses that.
Same test process as previous tests. Both with and without debug mode.
Recording the steps once:
make mrproper
vng --build \
--config tools/testing/selftests/net/packetdrill/config \
--config kernel/configs/debug.config
vng -v --run . --user root --cpus 4 -- \
make -C tools/testing/selftests TARGETS=net/packetdrill run_tests
Link: https://github.com/linux-netdev/nipa/wiki/How-to-run-netdev-selftests-CI-style#how-to-build
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240912005317.1253001-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Same as initial tests, import verbatim from
github.com/google/packetdrill, aside from:
- update `source ./defaults.sh` path to adjust for flat dir
- add SPDX headers
- remove author statements if any
- drop blank lines at EOF (new)
Also import set_sysctls.py, which many scripts depend on to set
sysctls and then restore them later. This is no longer strictly needed
for namespacified sysctl. But not all sysctls are namespacified, and
doesn't hurt if they are.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240912005317.1253001-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Keep file reference through the entire thing, don't bother with grabbing
struct path reference and while we are at it, don't confuse the hell out
of readers by random mix of path.dentry->d_sb and path.mnt->mnt_sb uses -
these two are equal, so just put one of those into a local variable and
use that.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
There is no reason why struct path pointer shouldn't be const-qualified
when being passed into bpf_token_create() LSM hook. Add that const.
Acked-by: Paul Moore <paul@paul-moore.com> (LSM/SELinux)
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
amdgpu:
- Avoid races between set_drr() functions and dc_state_destruct()
- Fix regerssion related to zpos
- Fix regression related to overlay cursor
- SMU 14.x updates
- JPEG fixes
- Silence an UBSAN warning
amdkfd:
- Fetch cacheline size from IP discovery
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZuHMpgAKCRC93/aFa7yZ
2Kl/AP4vMdYnJTzPr9jB92B9KMltpHdb04VRCiE4WdojXDSSiAEA+US1YwgH0v1O
ATgtwgy0c9gVTOII6mVWjUS71D12LgE=
=k1hP
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-fixes-6.11-2024-09-11' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.11-2024-09-11:
amdgpu:
- Avoid races between set_drr() functions and dc_state_destruct()
- Fix regerssion related to zpos
- Fix regression related to overlay cursor
- SMU 14.x updates
- JPEG fixes
- Silence an UBSAN warning
amdkfd:
- Fetch cacheline size from IP discovery
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911170528.838655-1-alexander.deucher@amd.com
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.5
This patch set contains bug fixes related to HBA state clean ups, FCP
discovery on older adapters, kref imbalances, log message improvements,
and support for a new diagnostic loopback testing mode.
The patches were cut against Martin's 6.12/scsi-queue tree.
Link: https://lore.kernel.org/r/20240912232447.45607-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The VMID feature adds an extra application services header to each frame.
As such, the loopback test path is updated to accommodate the extra
application header.
Changes include filling in APPID and WQES bit fields for XMIT_SEQUENCE64
commands, a special loopback source APPID for verifying received loopback
data matches what is sent, and increasing ELS WQ size to accommodate the
APPID field in loopback test mode.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Revise certain log messages marked as KERN_ERR LOG_TRACE_EVENT to
KERN_WARNING and use the lpfc_vlog_msg() macro to still log the event. The
benefit is that events of interest are still logged and the entire trace
buffer is not dumped with extraneous logging information when using default
lpfc_log_verbose driver parameter settings.
Also, delete the keyword "fail" from such log messages as they aren't
really causes for concern. The log messages are more for warnings to a SAN
admin about SAN activity.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Deleting an NPIV instance requires all fabric ndlps to be released before
an NPIV's resources can be torn down. Failure to release fabric ndlps
beforehand opens kref imbalance race conditions. Fix by forcing the DA_ID
to complete synchronously with usage of wait_queue.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With a FLOGI outstanding and loss of physical link connection to the fabric
for the duration of dev_loss_tmo, there is a fabric ndlp kref imbalance
that decrements the kref and sets the NLP_IN_RECOV_POST_DEV_LOSS flag at
the same time.
The issue is that when the FLOGI completion routine executes, the fabric
ndlp could already be freed because of the final kref put from the
dev_loss_tmo handler. Fix by early returning before the ndlp kref put if
the ndlp is deemed a candidate for NLP_IN_RECOV_POST_DEV_LOSS in the FLOGI
completion routine.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
An older generation of HBAs are failing FCP discovery due to usage of an
outdated field in FCP command WQEs.
Fix by checking the SLI Interface Type register for applicable support of
32 Byte CDB commands, and restore a setting for a WQE path using normal 16
byte CDBs.
Fixes: af20bb73ac ("scsi: lpfc: Add support for 32 byte CDBs")
Cc: stable@vger.kernel.org # v6.10+
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It's possible for the driver to send a CMF_SYNC_WQE to nonresponsive
firmware during reset of the adapter. The phba link_state conditional
check is currently a strict == LPFC_LINK_DOWN, which does not cover
initialization states before reaching the LPFC_LINK_UP state.
Update the phba->link_state conditional to < LPFC_LINK_UP so that all
initialization states are covered before allowing sending CMF_SYNC_WQE.
Update taking of the hbalock to be during this link_state check as well.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During HBA stress testing, a spam of received PLOGIs exposes a resource
recovery bug causing leakage of lpfc_sqlq entries from the global
phba->sli4_hba.lpfc_els_sgl_list.
The issue is in lpfc_els_flush_cmd(), where the driver attempts to recover
outstanding ELS sgls when walking the txcmplq. Only CMD_ELS_REQUEST64_CRs
and CMD_GEN_REQUEST64_CRs are added to the abort and cancel lists. A check
for CMD_XMIT_ELS_RSP64_WQE is missing in order to recover LS_ACC usages of
the phba->sli4_hba.lpfc_els_sgl_list too.
Fix by adding CMD_XMIT_ELS_RSP64_WQE as part of the txcmplq walk when
adding WQEs to the abort and cancel list in lpfc_els_flush_cmd(). Also,
update naming convention from CRs to WQEs.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During controller transitioning to READY state, if the controller is found
in transient states ("becoming ready" or "reset requested"), driver waits
for 510 secs even if the controller transitions out of these states
early. This causes an unnecessary delay of 510 secs in the overall firmware
initialization sequence.
Poll the controller state periodically (every 100 milliseconds) while
waiting for the controller to come out of the mentioned transient
states. Once the controller transits out of the transient states, come out
of the wait loop.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240905102753.105310-5-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make driver use the timestamp update interval value provided by firmware in
the driver page 1. If firmware fails to provide non-zero value, then the
driver will fall back to the driver defined macro.
Signed-off-by: Prayas Patel <prayas.patel@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240905102753.105310-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When enabling the IOC request and polling for controller ready status, poll
for controller fault and reset history bit. If the controller is faulted
or the reset history bit is set, retry the initialization a maximum of
three times (2 retries) or if the cumulative time taken for all retries
exceeds 510 seconds.
Signed-off-by: Prayas Patel <prayas.patel@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240905102753.105310-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
David Arinzon says:
====================
ENA driver metrics changes
This patchset contains an introduction of new metrics
available to ENA users.
====================
Link: https://patch.msgid.link/20240909084704.13856-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ENA currently supports the following customer metrics:
- `bw_in_allowance_exceeded`
- `bw_out_allowance_exceeded`
- `conntrack_allowance_exceeded`
- `linklocal_allowance_exceeded`
- `pps_allowance_exceeded`
This patch adds a new metric named:
`conntrack_allowance_available`.
Information about these metrics is available in [1].
In addition, the interface between the driver and the
device has been upgraded to allow more flexibility and
expendability to additional metrics in the future.
[1]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-network-performance-ena.html#network-performance-metrics
Signed-off-by: Ron Beider <rbeider@amazon.com>
Signed-off-by: Shahar Itzko <itzko@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20240909084704.13856-3-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ENA Express metrics, called `ena_srd` are exposed to
customers via `ethtool`.
The metrics allow customers to check the configuration
(mode), tx/rx counters as well as resource utilization.
The documentation is also updated to provide a general
explanation about ENA Express as well as links for further
information about metrics and configurations.
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20240909084704.13856-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ff the device returns page 0xb1 with length 8 (happens with qemu v2.x, for
example), sd_read_block_characteristics() may attempt an out-of-bounds
memory access when accessing the zoned field at offset 8.
Fixes: 7fb019c46e ("scsi: sd: Switch to using scsi_device VPD pages")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20240912134308.282824-1-mwilck@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
blk_mq_pci_map_queues() maps all queues but right after this, we overwrite
these mappings by calling blk_mq_map_queues(). Just use one helper but not
both.
Fixes: 42f22fe36d ("scsi: pm8001: Expose hardware queues for pm80xx")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20240912-do-not-overwrite-pci-mapping-v1-1-85724b6cec49@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects. Although
that is not the case here, it is seems best to use ';' unless ',' is
intended.
Found by inspection. No functional change intended. Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20240905023521.1642862-1-nichen@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During system resume, sd_start_stop_device() submits a START STOP UNIT
command to the SCSI device that is being resumed. That command is not
retried in case of a unit attention and hence may fail. An example:
[16575.983359] sd 0:0:0:3: [sdd] Starting disk
[16575.983693] sd 0:0:0:3: [sdd] Start/Stop Unit failed: Result: hostbyte=0x00 driverbyte=DRIVER_OK
[16575.983712] sd 0:0:0:3: [sdd] Sense Key : 0x6
[16575.983730] sd 0:0:0:3: [sdd] ASC=0x29 ASCQ=0x0
[16575.983738] sd 0:0:0:3: PM: dpm_run_callback(): scsi_bus_resume+0x0/0xa0 returns -5
[16575.983783] sd 0:0:0:3: PM: failed to resume async: error -5
Make the SCSI core retry the START STOP UNIT command if the device reports
that it has been powered on or that it has been reset.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240904210304.2947789-1-bvanassche@acm.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 0c52310f26 ("hrtimer: Ignore slack time for RT tasks in
schedule_hrtimeout_range()") effectivelly shortens a sleep in a polling
function in the driver. That is causing a performance regression as the
new value of just 2us is too low, in certain tests the perf drop is ~30%.
Fix this by adjusting the sleep to 20us (close to the previous value).
Reported-by: Jan Jurca <jjurca@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20240903144729.37218-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 8db8f6ce55 ("scsi: ufs: qcom: Add missing interconnect bandwidth
values for Gear 5") updated the ufs_qcom_bw_table for Gear 5. However, it
missed updating the cfg_bw value for the max mode.
Hence update the cfg_bw value for the max mode for UFS 4.x devices.
Fixes: 8db8f6ce55 ("scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5")
Cc: stable@vger.kernel.org
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Link: https://lore.kernel.org/r/20240903063709.4335-1-quic_mapa@quicinc.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a extraneous space after a newline in an ioc_info message.
Remove it and join to split literal strings into one.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902172708.369741-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a extraneous space after a newline in two lpfc_printf_log()
messages. Remove the space.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902150042.311157-1-colin.i.king@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the calculation of packet signatures by adding the offset into a page
in the read or write data payload when hashing the pages from it.
Fixes: 39bc58203f ("cifs: Add a function to Hash the contents of an iterator")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a extraneous space after a newline in a pm8001_dbg message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902141537.308914-1-colin.i.king@gmail.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a extraneous space after a newline in a dev_printk message,
remove it. Also fix non-tabbed indentation of the statement.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902141202.308632-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Using the real macro is usually more intuitive and readable when the
original file is guaranteed to contain the minmax.h header file and compile
correctly.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Link: https://lore.kernel.org/r/20240902013303.909316-1-yanzhen@vivo.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Usage of .dev_ddp_cleanup() in libcxgbi was removed by commit 5999299f1c
("cxgb3i,cxgb4i,libcxgbi: remove iSCSI DDP support") on 2016-07.
.csk_rx_pdu_ready() and debugfs_root have apparently never been used since
introduction by commit 9ba682f01e ("[SCSI] libcxgbi: common library for
cxgb3i and cxgb4i")
Remove the now unused function pointer from struct cxgbi_device.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/58f77f690d85e2c653447e3e3fc4f8d3c3ce8563.1725223504.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are some scenarios that can occur, such as performing an upgrade of
the virtual I/O server, where the supported max transfer of the backing
device for an ibmvfc HBA can change. If the max transfer of the backing
device decreases, this can cause issues with previously discovered
LUNs. This patch accomplishes two things. First, it changes the default
ibmvfc max transfer value to 1MB. This is generally supported by all
backing devices, which should mitigate this issue out of the box. Secondly,
it adds a module parameter, enabling a user to increase the max transfer
value to values that are larger than 1MB, as long as they have configured
these larger values on the virtual I/O server as well.
[mkp: fix checkpatch warnings]
Signed-off-by: Brian King <brking@linux.ibm.com>
Link: https://lore.kernel.org/r/20240903134708.139645-2-brking@linux.ibm.com
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
