VRAM+TT bos that are evicted from VRAM to TT may remain in
TT also after a revalidation following eviction or suspend.
This manifests itself as applications becoming sluggish
after buffer objects get evicted or after a resume from
suspend or hibernation.
If the bo supports placement in both VRAM and TT, and
we are on DGFX, mark the TT placement as fallback. This means
that it is tried only after VRAM + eviction.
This flaw has probably been present since the xe module was
upstreamed but use a Fixes: commit below where backporting is
likely to be simple. For earlier versions we need to open-
code the fallback algorithm in the driver.
v2:
- Remove check for dgfx. (Matthew Auld)
- Update the xe_dma_buf kunit test for the new strategy (CI)
- Allow dma-buf to pin in current placement (CI)
- Make xe_bo_validate() for pinned bos a NOP.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5995
Fixes: a78a8da51b ("drm/ttm: replace busy placement with flags v6")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250904160715.2613-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit cb3d7b3b46)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is a user controlled configfs attribute, we should not
modify that outside the configfs attr.store() implementation.
Fixes: bc417e54e2 ("drm/xe: Enable configfs support for survivability mode")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250904103521.7130-1-michal.wajdeczko@intel.com
(cherry picked from commit 079a5c83db)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We currently report an L3 bank mask as part of the GT topology on both
GTs (primary and media) because a copy of the L3 bank fuse register
exists on both GTs (e.g., $gsi_offset + 0x9130 on Xe3). After recent
discussions it's come to light that the only known userspace software
that uses this part of the uapi (the compute UMD and Mesa) only uses the
value reported for the primary GT; the value reported for the media GT
is ignored by both projects, and the media UMDs don't have any use for
L3 information today. Since we always strive to have our uapi match the
specific needs of userspace and not include additional unused baggage,
let's officially drop L3 bank reporting on the media GT going forward
and only keep it around for the primary GT where it actually gets used.
This change will only apply to future platforms (Xe3 and later); even
though it would probably be safe to remove it from Xe1/Xe2 as well, we
don't want to take any chances with changing existing ABI.
Note that we'd already disabled reading/reporting of the L3 bank for the
media GT on PTL in commit 9ab440a9d0 ("drm/xe/ptl: L3bank mask is not
available on the media GT") because it was discovered that the copy of
the fuse registers on the media GT were just reporting a bogus ~0 value
rather than an accurate mask. So this is just extending that PTL
behavior forward to WCL and other future platforms. Note that we're
also free to reinstate this part of the uapi in the future if/when some
new userspace consumer emerges that _does_ have a use for media-specific
L3 bank masks.
Cc: Fei Yang <fei.yang@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250905215614.796247-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Update the GPU OPP table with new opp levels along with the
speedbin configurations.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://lore.kernel.org/r/20250701-x1e-speedbin-b4-v2-3-a8a7e06d39fb@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If request_irq() in i40e_vsi_request_irq_msix() fails in an iteration
later than the first, the error path wants to free the IRQs requested
so far. However, it uses the wrong dev_id argument for free_irq(), so
it does not free the IRQs correctly and instead triggers the warning:
Trying to free already-free IRQ 173
WARNING: CPU: 25 PID: 1091 at kernel/irq/manage.c:1829 __free_irq+0x192/0x2c0
Modules linked in: i40e(+) [...]
CPU: 25 UID: 0 PID: 1091 Comm: NetworkManager Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy)
Hardware name: [...]
RIP: 0010:__free_irq+0x192/0x2c0
[...]
Call Trace:
<TASK>
free_irq+0x32/0x70
i40e_vsi_request_irq_msix.cold+0x63/0x8b [i40e]
i40e_vsi_request_irq+0x79/0x80 [i40e]
i40e_vsi_open+0x21f/0x2f0 [i40e]
i40e_open+0x63/0x130 [i40e]
__dev_open+0xfc/0x210
__dev_change_flags+0x1fc/0x240
netif_change_flags+0x27/0x70
do_setlink.isra.0+0x341/0xc70
rtnl_newlink+0x468/0x860
rtnetlink_rcv_msg+0x375/0x450
netlink_rcv_skb+0x5c/0x110
netlink_unicast+0x288/0x3c0
netlink_sendmsg+0x20d/0x430
____sys_sendmsg+0x3a2/0x3d0
___sys_sendmsg+0x99/0xe0
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x82/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
---[ end trace 0000000000000000 ]---
Use the same dev_id for free_irq() as for request_irq().
I tested this with inserting code to fail intentionally.
Fixes: 493fb30011 ("i40e: Move q_vectors from pointer to array to array of pointers")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The igb driver incorrectly skips the link test when the network
interface is admin down (if_running == false), causing the test to
always report PASS regardless of the actual physical link state.
This behavior is inconsistent with other drivers (e.g. i40e, ice, ixgbe,
etc.) which correctly test the physical link state regardless of admin
state.
Remove the if_running check to ensure link test always reflects the
physical link state.
Fixes: 8d420a1b3e ("igb: correct link test not being run when link is down")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The igb driver currently causes a NULL pointer dereference when executing
the ethtool loopback test. This occurs because there is no associated
q_vector for the test ring when it is set up, as interrupts are typically
not added to the test rings.
Since commit 5ef44b3cb4 removed the napi_id assignment in
__xdp_rxq_info_reg(), there is no longer a need to pass a napi_id to it.
Therefore, simply use 0 as the last parameter.
Fixes: 2c6196013f ("igb: Add AF_XDP zero-copy Rx support")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Tianyu Xu <tianyxu@cisco.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We can now safely provide a block device when extracting user pages for
driver and user passthrough commands. Set the bdev so the caller doesn't
have to do that later. This has an additional benefit of being able to
extract P2P pages in the passthrough path.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only need to consider data and metadata dma mapping types separately.
The request and bio integrity payload have enough flag bits to
internally track the mapping type for each. Use these so the caller
doesn't need to track them, and provide separete request and integrity
helpers to the common code. This will make it easier to scale new
mappings, like the proposed MMIO attribute, without burdening the caller
to track such things.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the extraction flags to allow p2p pages for the metadata buffer if
the block device allows it. Similar to data payloads, ensure the bio
does not use merging if we see a p2p page.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current mem limit check leaks some GTT memory (reserved_for_pt
reserved_for_ras + adev->vram_pin_size) for small APUs.
Since carveout VRAM is tunable on APUs, there are three case
regarding the carveout VRAM size relative to GTT:
1. 0 < carveout < gtt
apu_prefer_gtt = true, is_app_apu = false
2. carveout > gtt / 2
apu_prefer_gtt = false, is_app_apu = false
3. 0 = carveout
apu_prefer_gtt = true, is_app_apu = true
It doesn't make sense to check below limitation in case 1
(default case, small carveout) because the values in the below
expression are mixed with carveout and gtt.
adev->kfd.vram_used[xcp_id] + vram_needed >
vram_size - reserved_for_pt - reserved_for_ras -
atomic64_read(&adev->vram_pin_size)
gtt: kfd.vram_used, vram_needed, vram_size
carveout: reserved_for_pt, reserved_for_ras, adev->vram_pin_size
In case 1, vram allocation will go to gtt domain, skip vram check
since ttm_mem_limit check already cover this allocation.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fa7c99f04f)
When creating p2p links, KFD needs to check XGMI link
with two conditions, hive_id and is_sharing_enabled,
but it is missing to check is_sharing_enabled, so add
it to fix the error.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 36cc7d1317)
Fixes a bug where unbinding of the GPU would leave the oem i2c adapter
registered resulting in a null pointer dereference when applications try
to access the invalid device.
Fixes: 3d5470c973 ("drm/amd/display/dm: add support for OEM i2c bus")
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 89923fb7ea)
Cc: stable@vger.kernel.org
No more callers.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're checking length and addresses against the same alignment value, so
use the more simple iterator check.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No more callers.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer checks all the segments for validity later, so no need
for an early check. Just reduce it to a simple position and total length
check, and defer the more invasive segment checks to the block layer.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer checks all the segments for validity later, so no need
for an early check. Just reduce it to a simple position and total length
check, and defer the more invasive segment checks to the block layer.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of ensuring each vector is block size aligned while constructing
the bio, just ensure the entire size is aligned after it's built. This
makes getting bio pages more flexible to accepting device valid io
vectors that would otherwise get rejected by alignment checks.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer tries to align bio vectors to the block device's logical
block size. Some cases don't have a block device, or we may need to
align to something larger, which we can't derive it from the queue
limits. Have the caller specify what they want, or allow any length
alignment if nothing was specified. Since the most common use case
relies on the block device's limits, a helper function is provided.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're already iterating every segment, so check these for a valid IO
lengths at the same time. Individual segment lengths will not be checked
on passthrough commands. The read/write command segments must be sized
to the dma alignment.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[Why]
dm_prepare_suspend() was added in commit 50e0bae34f
("drm/amd/display: Add and use new dm_prepare_suspend() callback")
to allow display to turn off earlier in the suspend sequence.
This caused a regression that HDMI audio sometimes didn't work
properly after resume unless audio was playing during suspend.
[How]
Drop dm_prepare_suspend() callback. All code in it will still run
during dm_suspend(). Also drop unnecessary dm_complete() callback.
dm_complete() was used for failed prepare and also for any case
of successful resume. The code in it already runs in dm_resume().
This change will introduce more time that the display is turned on
during suspend sequence. The compositor can turn it off sooner if
desired.
Cc: Harry Wentland <harry.wentland@amd.com>
Reported-by: Przemysław Kopa <prz.kopa@gmail.com>
Closes: https://lore.kernel.org/amd-gfx/1cea0d56-7739-4ad9-bf8e-c9330faea2bb@kernel.org/T/#m383d9c08397043a271b36c32b64bb80e524e4b0f
Reported-by: Kalvin <hikaph+oss@gmail.com>
Closes: https://github.com/alsa-project/alsa-lib/issues/465
Closes: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4809
Fixes: 50e0bae34f ("drm/amd/display: Add and use new dm_prepare_suspend() callback")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2fd653b9bb)
Cc: stable@vger.kernel.org
[why]
The current PG & RCG programming in driver has some gaps and incorrect
sequences.
[how]
Added delays after ungating clocks to allow ramp up, increased polling
to allow more time for power up, and removed the incorrect sequences.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1bde5584e2)
Cc: stable@vger.kernel.org
The loop in bench_sockmap_prog_destroy() has two issues:
1. Using 'sizeof(ctx.fds)' as the loop bound results in the number of
bytes, not the number of file descriptors, causing the loop to iterate
far more times than intended.
2. The condition 'ctx.fds[0] > 0' incorrectly checks only the first fd for
all iterations, potentially leaving file descriptors unclosed. Change
it to 'ctx.fds[i] > 0' to check each fd properly.
These fixes ensure correct cleanup of all file descriptors when the
benchmark exits.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250909124721.191555-1-jiayuan.chen@linux.dev
Closes: https://lore.kernel.org/bpf/aLqfWuRR9R_KTe5e@stanley.mountain/
Tariq Toukan says:
====================
mlx5-next updates 2025-09-09
The following pull-request contains a common mlx5 update.
* tag 'mlx5-rs-fec-ifc' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add RS FEC histogram infrastructure
====================
Link: https://patch.msgid.link/1757413460-539097-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In active_engines, if intel_context_create fails, we need to go
backwards through all the created contexts to free/put them. However,
the way this is currently performed skips the first created context, as
if count == 1, then --count returns 0 and exits the while-loop
prematurely without performing the intel_context_put on context 0.
Fix this by post-decrementing count in the while-loop, rather than
pre-decrementing it. This change makes the prior guard against count
underflowing unnecessary, as the while-loop exits when count == 0.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Krzysztof Karas <krzysztof.karas@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250904193041.12888-2-jonathan.cavitt@intel.com
The PMK8550 RTC is always enabled in its DTSI file since
commit a791fc1996 ("arm64: dts: qcom: pmk8550: always enable RTC PMIC
device"), so drop redundant status=okay in SM8650 boards.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908085331.56478-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add new device support for the Samsung Galaxy S20 phone
What works (common dtsi):
- SimpleFB
- Pstore/ramoops
- GPIO keys
- UFS
- USB
Signed-off-by: Eric Gonçalves <ghatto404@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250905190931.27481-4-ghatto404@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add binding for the Samsung Galaxy S20 board, codenamed X1Q,
which is based on the Qualcomm Snapdragon 865 SoC.
Signed-off-by: Eric Gonçalves <ghatto404@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250905190931.27481-3-ghatto404@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move common parts of the device tree to a separate dtsi in preparation for
adding other Samsung devices from the S20, Tab S7 or Note 20 families,
creating sm8250-samsung-common.dtsi. Also add support for UFS, USB and
GPIO keys.
Signed-off-by: Eric Gonçalves <ghatto404@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250905190931.27481-2-ghatto404@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In addition of checking if we are running on the BATTLEMAGE,
we should also check for not being a VF driver, as VFs can't
access necessary registers, and doing so leads to:
| .. [drm] GT0: VF is trying to read an inaccessible register 0x35b004+0x0
| RIP: 0010:xe_gt_sriov_vf_read32+0x5e2/0x8a0 [xe]
| Call Trace:
| xe_mmio_read32+0x110/0x280 [xe]
| read_residency_counter+0x42/0xd0 [xe]
| dgfx_pkg_residencies_show+0x115/0x190 [xe]
| .. [drm] Package G2 counter failed to read, ret -19
or
| .. [drm] GT0: VF is trying to read an inaccessible register 0x35b004+0x0
| RIP: 0010:xe_gt_sriov_vf_read32+0x5e2/0x8a0 [xe]
| Call Trace:
| xe_mmio_read32+0x110/0x280 [xe]
| read_residency_counter+0x42/0xd0 [xe]
| dgfx_pcie_link_residencies_show+0xe7/0x160 [xe]
| .. [drm] PCIE LINK L0 RESIDENCY counter failed to read, ret -19
Similarly, there is no point to expose inject_csc_hw_error on VFs,
as HW errors support is already disabled for VFs.
Bspec: 53221
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Soham Purkait <soham.purkait@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250905173625.8398-1-michal.wajdeczko@intel.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch adds a new WQ_PERCPU flag to explicitly request the use of
the per-CPU behavior. Both flags coexist for one release cycle to allow
callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
queue_work() / queue_delayed_work() / mod_delayed_work() will now use the
new unbound wq: whether the user still use the old wq a warn will be
printed along with a wq redirect to the new one.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
queue_work() / queue_delayed_work() / mod_delayed_work() will now use the
new unbound wq: whether the user still use the old wq a warn will be
printed along with a wq redirect to the new one.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace kmalloc() followed by copy_from_user() with memdup_user() to
improve and simplify raw_cmd_copyin().
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the sound card node with tested playback over max98357a
I2S speakers amplifier and I2S mic.
Introduce HS (High-Speed) MI2S pin control support.
The I2S max98357a speaker amplifier is connected via HS0 and I2S
microphones utilize the HS2 interface.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250822131902.1848802-3-mohammad.rafi.shaik@oss.qualcomm.com
[bjorn: Sorted nodes]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the Samsung ATNA40YK20 eDP panel to the device tree for the
Snapdragon T14s OLED model.
Signed-off-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250814-wip-obbardc-qcom-t14s-oled-panel-v7-1-89966ae886a3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the venus node to allow the video codec to start working properly
by setting its status to "okay".
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Renjiang Han <quic_renjiang@quicinc.com>
Link: https://lore.kernel.org/r/20250826-enable-venus-for-sm6150-v9-2-486d167639a1@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the venus node to the devicetree for the sm6150 platform to enable
video functionality. The sm6150 platform currently lacks video
functionality due to the absence of the venus node. Fallback to sc7180 due
to the same video core.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Renjiang Han <quic_renjiang@quicinc.com>
Link: https://lore.kernel.org/r/20250826-enable-venus-for-sm6150-v9-1-486d167639a1@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It comes soldered onboard, just like on the QCP.
Unfortunately, the rfkill pin is triggered by default, so a workaround
is needed to convince the Linux driver to enable the hw, after which it
works just fine.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250909-topic-romulus_wifi_pci-v2-1-3dc495d5559f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This patch completes the removal of struct_mutex from the driver.
Remove the related TODO item, as the transition away from struct_mutex
is now complete.
Also clean up references to struct_mutex in i915.rst to avoid outdated
documentation.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-10-luiz.mello@estudante.ufscar.br
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The struct_mutex field in drm_i915_private is no longer used anywhere in
the driver. This patch removes it completely to clean up unused code and
avoid confusion.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-9-luiz.mello@estudante.ufscar.br
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The struct_mutex will be removed from the DRM subsystem, as it was a
legacy BKL that was only used by i915 driver. After review, it was
concluded that its usage was no longer necessary
This patch updates various comments in the i915 codebase to
either remove or clarify references to struct_mutex, in order to
prevent future misunderstandings.
* i915_drv.h: Removed the statement that stolen_lock is the inner lock
when overlaps with struct_mutex, since struct_mutex is no longer used
in the driver.
* i915_gem.c: Removed parentheses suggesting usage of struct_mutex, which
which is no longer used.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-8-luiz.mello@estudante.ufscar.br
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The struct_mutex will be removed from the DRM subsystem, as it was a
legacy BKL that was only used by i915 driver. After review, it was
concluded that its usage was no longer necessary
This patch update a comment about struct_mutex in i915/display, in order
to prevent future misunderstandings.
* intel_fbc.c: Removed the statement that intel_fbc->lock is the inner
lock when overlapping with struct_mutex, since struct_mutex is no
longer used anywhere in the driver.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-7-luiz.mello@estudante.ufscar.br
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250909-constify-dispcc-glymur-desc-fix-v1-1-6cb59730863f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Rockchip RK3588 SoC can also support LPDDR5 memory. This type of
memory needs some special case handling in the rockchip-dfi driver.
Add support for it in rockchip-dfi, as well as the needed GRF register
definitions.
This has been tested as returning both the right cycle count and
bandwidth on a LPDDR5 board where the CKR bit is 1. I couldn't test
whether the values are correct on a system where CKR is 0, as I'm not
savvy enough with the Rockchip tooling to know whether this can be set
in the DDR init blob.
Downstream has some special case handling for a hardware version where
not just the control bits differ, but also the register. Since I don't
know whether that hardware version is in any production silicon, it's
left unimplemented for now, with an error message urging users to report
if they have such a system.
There is a slight change of behaviour for non-LPDDR5 systems: instead of
writing 0 as the control flags to the control register and pretending
everything is alright if the memory type is unknown, we now explicitly
return an error.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://patchwork.kernel.org/project/linux-pm/patch/20250530-rk3588-dfi-improvements-v1-2-6e077c243a95@collabora.com/
