On RK3588 with LPDDR4X memory, the cycle count as returned by
perf stat -a -e rockchip_ddr/cycles/ sleep 1
consistently reads half as much as what the actual DDR frequency is at.
For a LPDDR4X module running at 2112MHz, I get more like 1056059916
cycles per second, which is almost bang-on half what it should be. No,
I'm not mixing up megatransfers and megahertz.
Consulting the downstream driver, this appears to be because the RK3588
hardware specifically (and RK3528 as well, for future reference) needs a
multiplier of 2 to get to the correct frequency with everything but
LPDDR5.
The RK3588's actual memory bandwidth measurements in MB/s are correct
however, as confirmed with stress-ng --stream. This makes me think the
access counters are not affected in the same way. This tracks with the
vendor kernel not multiplying the access counts either.
Solve this by adding a new member to the dfi struct, which each SoC can
set to whatever they want, but defaults to 1 if left unset by the SoC
init functions. The event_get_count op can then use this multiplier if
the cycle count is requested.
The cycle multiplier is not used in rockchip_dfi_get_event because the
vendor driver doesn't use it there either, and we don't do other actual
bandwidth unit conversion stuff in there anyway.
Fixes: 481d97ba61 ("PM / devfreq: rockchip-dfi: add support for RK3588")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20250530-rk3588-dfi-improvements-v1-1-6e077c243a95@collabora.com/
The struct_mutex will be removed from the DRM subsystem, as it was a
legacy BKL that was only used by i915 driver. After review, it was
concluded that its usage was no longer necessary
This patch updates various comments in the i915/gem and i915/gt
codebase to either remove or clarify references to struct_mutex, in
order to prevent future misunderstandings.
* i915_gem_execbuffer.c: Replace reference to struct_mutex with
vm->mutex, as noted in the eb_reserve() function, which states that
vm->mutex handles deadlocks.
* i915_gem_object.c: Change struct_mutex by
drm_i915_gem_object->vma.lock. i915_gem_object_unbind() in i915_gem.c
states that this lock is who actually protects the unbind.
* i915_gem_shrinker.c: The correct lock is actually i915->mm.obj, as
already documented in its declaration.
* i915_gem_wait.c: The existing comment already mentioned that
struct_mutex was no longer necessary. Updated to refer to a generic
global lock instead.
* intel_reset_types.h: Cleaned up the comment text. Updated to refer to
a generic global lock instead.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-6-luiz.mello@estudante.ufscar.br
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove the use of struct_mutex from intel_guc_log.c and replace it with
a dedicated lock, guc_lock, defined within the intel_guc_log struct.
The struct_mutex was previously used to protect concurrent access and
modification of intel_guc_log->level in intel_guc_log_set_level().
However, it was suggested that the lock should reside within the
intel_guc_log struct itself.
Initialize the new guc_lock in intel_guc_log_init_early(), alongside the
existing relay.lock. The lock is initialized using drmm_mutex_init(),
which also ensures it is properly destroyed when the driver is unloaded.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-5-luiz.mello@estudante.ufscar.br
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The intel_guc_log->relay.lock is currently initialized in
intel_guc_log_init_early(), but it lacks a corresponding destructor,
which can lead to a memory leak.
This patch replaces the use of mutex_init() with drmm_mutex_init(),
which ensures the lock is properly destroyed when the driver is
unloaded.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-4-luiz.mello@estudante.ufscar.br
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
IT6263 supports HDMI vendor specific infoframe. The infoframe header
and payload are configurable via NULL packet registers. The infoframe
is enabled and disabled via PKT_NULL_CTRL register. Add the HDMI vendor
specific infoframe support.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-it6263-vendor-specific-infoframe-v2-1-3f2ebd9135ad@nxp.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Instead of writing the first byte of the infoframe (and hoping that the
rest is default / zeroes), hook Audio InfoFrame support into the
write_infoframe / clear_infoframes callbacks and use
drm_atomic_helper_connector_hdmi_update_audio_infoframe() to write the
frame.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250903-adv7511-audio-infoframe-v1-2-05b24459b9a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Instead of disabling and then reenabling AVI infoframe, use the
recommended way of updating it on the fly: latch current values using
the ADV7511_REG_INFOFRAME_UPDATE register.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250903-adv7511-audio-infoframe-v1-1-05b24459b9a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Remove struct_mutex from ivb_parity_work() function.
The ivb_parity_work runs in a workqueue so it cannot race with itself.
Also, it is not protecting anything with the other remaining usage of
struct_mutex.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-3-luiz.mello@estudante.ufscar.br
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Move legacy BKL struct_mutex from drm_device to drm_i915_private, which
is the last remaining user.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-2-luiz.mello@estudante.ufscar.br
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Logging messages that show some type of "out of memory" error are generally
unnecessary as there is a generic message and a stack dump done by the
memory subsystem. These messages generally increase kernel size without
much added value[1].
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value
instead.
[1]: https://lore.kernel.org/lkml/1402419340.30479.18.camel@joe-AO725/
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/670017/
Link: https://lore.kernel.org/r/20250820131300.499727-1-liaoyuanhong@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Change 'ret' from unsigned long to int, as storing negative error codes
in an unsigned long makes it never equal to -ETIMEDOUT, causing logical
errors.
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/671100/
Link: https://lore.kernel.org/r/20250826092047.224341-1-rongqianfeng@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
During bringup of a new GPU support, it is convenient to have knob to
quickly disable GPU, but keep the display support. This helps to
fallback to 'kms_swrast' in case of bootup issues due to GPU. Add a
modparam to support this.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672262/
Link: https://lore.kernel.org/r/20250902-assorted-sept-1-v1-3-f3ec9baed513@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Hardware Programming Guide for DSI PHY says that PLL_SHUTDOWNB and
DIGTOP_PWRDN_B have to be asserted for any PLL register access.
Whenever dsi_pll_7nm_vco_recalc_rate() or dsi_pll_7nm_vco_set_rate()
were called on unprepared PLL, driver read values of zero leading to all
sort of further troubles, like failing to set pixel and byte clock
rates.
Asserting the PLL shutdown bit is done by dsi_pll_enable_pll_bias() (and
corresponding dsi_pll_disable_pll_bias()) which are called through the
code, including from PLL .prepare() and .unprepare() callbacks.
The .set_rate() and .recalc_rate() can be called almost anytime from
external users including times when PLL is or is not prepared, thus
driver should not interfere with the prepare status.
Implement simple reference counting for the PLL bias, so
set_rate/recalc_rate will not change the status of prepared PLL.
Issue of reading 0 in .recalc_rate() did not show up on existing
devices, but only after re-ordering the code for SM8750.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673416/
Link: https://lore.kernel.org/r/20250908094950.72877-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The vivid driver supports the <Vendor Command With ID> message,
but if the Vendor ID of the received message didn't match the Vendor ID
of the CEC Adapter, then it ignores it (good) and returns 0 (bad).
It should return -ENOMSG to indicate that other followers should be
asked to handle it. Return code 0 means that the driver handled it,
which is wrong in this case.
As a result, userspace followers never get the chance to process such a
message.
Refactor the code a bit to have the function return -ENOMSG at the end,
drop the default case, and ensure that the message handlers return 0.
That way 0 is only returned if the message is actually handled in the
vivid_received() function.
Fixes: 812765cd69 ("media: vivid: add <Vendor Command With ID> support")
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Media endpoints are not devices, and there is no valid or sane usecase,
when an endpoint on the ISP side is an unavailable device.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
For sake of simplicity it makes sense to register all CAMSS subdevices
from its async notifier, this will cover all possible use cases, even
if there is no connected sensors to the CAMSS ISP.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
There is no potential for a custom .link_entities callback, remove it
by replacing with a common camss_link_entities().
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: amended for qcm2290, qcs8300, sa8775p]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vfe in qcs8300 is version 690, it is same as vfe used in
lemans(sa8775p). vfe gen3 have support for vfe 690.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The CSID in qcs8300 is version 690, it is same as csid used in
lemans(sa8775p). csid gen3 have support for csid 690.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
QCS8300 uses the same CSIPHY hardware version (v1.3.0) as
SA8775P. The only difference between the two platforms is
the number of CSIPHY instances: SA8775P has four, while
QCS8300 has three.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add CAMSS_8300 enum, QCS8300 compatible and qcs8300 camss driver
private data, the private data just include some basic information
for now, later changes will enumerate with csiphy, tpg, csid and
vfe resources.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add the compatible string "qcom,qcs8300-camss" to support the
Camera Subsystem (CAMSS) on the Qualcomm QCS8300 platform.
The QCS8300 platform provides:
- 2 x VFE (version 690), each with 3 RDI
- 5 x VFE Lite (version 690), each with 6 RDI
- 2 x CSID (version 690)
- 5 x CSID Lite (version 690)
- 3 x CSIPHY (version 690)
- 3 x TPG
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for VFE 690 found on lemans(SA8775P). This is
different from vfe 780 w.r.t few register offsets. It
supports two full and five lite VFE.
Co-developed-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Co-developed-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for CSID 690 found on lemans(sa8775p) soc, This
is different from csid 780 w.r.t few register offsets and
bit-fields.
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for CSIPHY (v1.3.0) found on lemans(sa8775p). This
implementation is based on the titan 690 implementation.
Co-developed-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add CAMSS_8775P enum, compatible and lemans(sa8775p) camss driver
private data, the private data just include some basic information
now, later changes will enumerate with csiphy, tpg, csid and vfe
resources.
Co-developed-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add the compatible string "qcom,sa8775p-camss" to support the
Camera Subsystem (CAMSS) on the Qualcomm lemans platform.
The Lemans(SA8775P) platform provides:
- 2 x VFE (version 690), each with 3 RDI
- 5 x VFE Lite (version 690), each with 6 RDI
- 2 x CSID (version 690)
- 5 x CSID Lite (version 690)
- 4 x CSIPHY (version 690)
- 3 x TPG
Lemans is the first Qualcomm SoC to introduce a CSIPHY-based
Test Pattern Generator (TPG).
Co-developed-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Rename the file camss-vfe-780.c to camss-vfe-gen3.c to enable
reuse of VFE logic across multiple SoCs.
The lemans(sa8775p) SoC includes VFE 690, which is very similar
to VFE 780, with only minor differences in register bitfields.
Rename prepares the codebase for supporting additional SoCs
without duplicating VFE logic.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Rename the file camss-csid-780.c to camss-csid-gen3.c to enable
reuse of CSID logic across multiple SoCs.
The lemans(sa8775p) SoC includes CSID 690, which is functionally very
similar to CSID 780, with only minor differences in register
bitfields. This rename prepares the codebase for supporting
additional SoCs without duplicating CSID logic.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The camera subsystem for QCM2290 which is based on Spectra 340.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
This is the CSI PHY version found in QCS2290/QCM2290 SoCs.
The table is extracted from downstream camera driver.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for CSID found in QCM2290, it's a simplified gen-2 version.
- There is no Test Pattern Generator (moved outside CSID)
- There is no subsampling (moved to CAMIF module)
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for TFE (Thin Front End) found in QCM2290.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: made tfe_line_iface_map and tfe_subgroup_line map static]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add bindings for qcom,qcm2290-camss in order to support the camera
subsystem found in the Qualcomm Robotics RB1 Platform (QRB2210).
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bod: reordered patch title to dt-bindings: media]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When we succeed loading the firmware, we don't want to hold on to the
firmware pointer anymore, since it won't be freed anywhere else. The same
applies for the mapped memory. Unmapping the memory is particularly
important since the memory will be protected after the Iris firmware is
started, so we need to make sure there will be no accidental access to this
region (even if just a speculative one from the CPU).
Almost the same firmware loading code also exists in venus/firmware.c,
there it is implemented correctly.
Fix this by dropping the early "return ret" and move the call of
qcom_scm_pas_auth_and_reset() out of iris_load_fw_to_memory(). We should
unmap the memory before bringing the firmware out of reset.
Cc: stable@vger.kernel.org
Fixes: d19b163356 ("media: iris: implement video firmware load/unload")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for SM8750 Iris codec with major differences against
previous generation SM8650:
1. New clocks and new resets, thus new power up and power down
sequences,
2. New WRAPPER_IRIS_VCODEC_VPU_WRAPPER_SPARE_0 register programmed
during boot-up
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Current devices use same power up sequence, but starting with Qualcomm
SM8750 (VPU v3.5) the sequence will grow quite a bit, so allow
customizing it. No functional change so far for existing devices.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Driver implements different callbacks for the power off controller
(.power_off_controller):
- iris_vpu_power_off_controller,
- iris_vpu33_power_off_controller,
The generic wrapper for handling power off - iris_vpu_power_off() -
calls them via 'iris_platform_data->vpu_ops', so shall the cleanup code
in iris_vpu_power_on().
This makes also sense if looking at caller of iris_vpu_power_on(), which
unwinds also with the wrapper calling respective platfortm code (unwinds
with iris_vpu_power_off()).
Otherwise power off sequence on the newer VPU3.3 in error path is not
complete.
Fixes: c69df5de4a ("media: platform: qcom/iris: add power_off_controller to vpu_ops")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add the missing write to AON_WRAPPER_MVP_NOC_LPI_CONTROL before
reading the LPI status register. Introduce a handshake loop to ensure
MNoC enters low power mode reliably during VPU3 hardware power-off with
timeout handling.
Fixes: 02083a1e00 ("media: platform: qcom/iris: add support for vpu33")
Cc: stable@vger.kernel.org
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Qualcomm SoC Iris video codec is an evolution of previous Venus and
it comes with its own Iris Linux drivers. These new drivers were
accepted under condition they actually improve state of afairs, instead
of duplicating old, legacy solutions.
Unfortunately binding still references common parts of Venus without
actual need and benefit. For example Iris does not use fake
"video-firmware" device node (fake because there is no actual device
underlying it and it was added only to work around some Linux issues
with IOMMU mappings).
Stop referencing venus-common schema in the new Qualcomm Iris bindings
and move all necessary properties, except unused "video-firmware" (no
driver usage, no DTS).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
[bod: Changed title order to dt-bindings: media]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add binding for Qualcom SM8750 Iris video codec, which comes with
significantly different powering up sequence than previous SM8650, thus
different clocks and resets. For consistency keep existing clock and
clock-names naming, so the list shares common part.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bod: re-ordered patch title to dt-bindings: media]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
