kfence_shutdown_cache() is called under slab_mutex when the cache is
destroyed synchronously, and outside slab_mutex during the delayed
destruction of SLAB_TYPESAFE_BY_RCU caches.
It seems it should always be safe to call it outside of slab_mutex so we
can just move the call to kmem_cache_release(), which is called outside.
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
kmem_cache_destroy() includes removing the associated sysfs and debugfs
directories, and the cache from the list of caches that appears in
/proc/slabinfo. Currently this might not happen immediately when:
- the cache is SLAB_TYPESAFE_BY_RCU and the cleanup is delayed,
including the directores removal
- __kmem_cache_shutdown() fails due to outstanding objects - the
directories remain indefinitely
When a cache is recreated with the same name, such as due to module
unload followed by a load, the directories will fail to be recreated for
the new instance of the cache due to the old directories being present.
The cache will also appear twice in /proc/slabinfo.
While we want to convert the SLAB_TYPESAFE_BY_RCU cleanup to be
synchronous again, the second point remains. So let's fix this first and
have the directories and slabinfo removed immediately in
kmem_cache_destroy() and regardless of __kmem_cache_shutdown() success.
This should not make debugging harder if __kmem_cache_shutdown() fails,
because a detailed report of outstanding objects is printed into dmesg
already due to the failure.
Also simplify kmem_cache_release() sysfs handling by using
__is_defined(SLAB_SUPPORTS_SYSFS).
Note the resulting code in kmem_cache_destroy() is a bit ugly but will
be further simplified - this is in order to make small bisectable steps.
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
There's only one caller of shutdown_cache() so move the code into it.
Preparatory patch for further changes, no functional change.
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmbK2B8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGFwkH/10QpUgzIfbFKbF+
5hwcvaqS5myxWwJ4PjN0eR1qGE6RzVO0Tb24+TVql+7pxu+iWm1kYgC3+/T5xJsP
ECAszdmPWSco1xaHrh2y3PyCJjaBiqFbIxdjPp7odjDpG9qarbcty8YpWs44u/gd
RDXzHUuScEShBhEt0ZhvE1pIDL8jJ8JL3yqOMZ+XaDxtJbjaHw4GHp8efxlBWc8N
jZKIVJi22q5NWG5T0tGtPWwzCm0ewA/JNMTEvE9leoSoAgO85NZ0ivxMC76q/tbj
BrYk5KnzfhJs4b/n/KtIwWaLTgLyXKGqHMaMq8sbXtp410aUdgnRJO2cl3fI+1vc
vxQfAfk=
=RemI
-----END PGP SIGNATURE-----
Merge v6.11-rc5 into drm-next
amdgpu pr conconflicts due to patches cherry-picked to -fixes, I might
as well catch up with a backmerge and handle them all. Plus both misc
and intel maintainers asked for a backmerge anyway.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When introducing the ability for drivers to indicate the minimum number
of buffers they require an application to allocate, commit 6662edcd32
("media: videobuf2: Add min_reqbufs_allocation field to vb2_queue
structure") also introduced a global minimum of 2 buffers. It turns out
this breaks the Renesas R-Car VSP test suite, where a test that
allocates a single buffer fails when two buffers are used.
One may consider debatable whether test suite failures without failures
in production use cases should be considered as a regression, but
operation with a single buffer is a valid use case. While full frame
rate can't be maintained, memory-to-memory devices can still be used
with a decent efficiency, and requiring applications to allocate
multiple buffers for single-shot use cases with capture devices would
just waste memory.
For those reasons, fix the regression by dropping the global minimum of
buffers. Individual drivers can still set their own minimum.
Fixes: 6662edcd32 ("media: videobuf2: Add min_reqbufs_allocation field to vb2_queue structure")
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20240825232449.25905-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Kunkun Jiang reports that for a workload involving the simultaneous startup
of a large number of VMs (for a total of about 200 vcpus), a lot of CPU
time gets spent on spinning on the tmp_mask_lock that exists as a static
raw spinlock in irq_do_set_affinity(). This lock protects a global cpumask
(tmp_mask) that is used as a temporary variable to compute the resulting
affinity.
While this is triggered by KVM issuing a irq_set_affinity() call each time
a vcpu is about to execute, it is obvious that having a single global
resource is not very scalable.
Since a cpumask can be a fairly large structure on systems with a high core
count, a stack allocation is not really appropriate. Instead, turn the
global cpumask into a per-CPU variable, removing the need for locking
altogether as the code is executed with preemption and interrupts disabled.
[ tglx: Moved the per CPU variable declaration outside of the function ]
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kunkun Jiang <jiangkunkun@huawei.com>
Link: https://lore.kernel.org/all/20240826080618.3886694-1-maz@kernel.org
Link: https://lore.kernel.org/all/a7fc58e4-64c2-77fc-c1dc-f5eb78dbbb01@huawei.com
With recent work to the doorbell workaround code a small hole was
introduced that could cause a tx_timeout. This happens if the rx
dbell_deadline goes beyond the netdev watchdog timeout set by the driver
(i.e. 2 seconds). Fix this by changing the netdev watchdog timeout to 5
seconds and reduce the max rx dbell_deadline to 4 seconds.
The test that can reproduce the issue being fixed is a multi-queue send
test via pktgen with the "burst" setting to 1. This causes the queue's
doorbell to be rung on every packet sent to the driver, which may result
in the device missing doorbells due to the high doorbell rate.
Cc: stable@vger.kernel.org
Fixes: 4ded136c78 ("ionic: add work item for missed-doorbell check")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240822192557.9089-1-brett.creeley@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
UAPI Changes:
- Limit the number of relocations to INT_MAX (Tvrtko)
Only impact should be synthetic tests.
Driver Changes:
- Fix for #11396: GPU Hang and rcs0 reset on Cherrytrail platform
- Fix Virtual Memory mapping boundaries calculation (Andi)
- Fix for #11255: Long hangs in buddy allocator with DG2/A380 without
Resizable BAR since 6.9 (David)
- Mark the GT as dead when mmio is unreliable (Chris, Andi)
- Workaround additions / fixes for MTL, ARL and DG2 (John H, Nitin)
- Enable partial memory mapping of GPU virtual memory (Andi, Chris)
- Prevent NULL deref on intel_memory_regions_hw_probe (Jonathan, Dan)
- Avoid UAF on intel_engines_release (Krzysztof)
- Don't update PWR_CLK_STATE starting Gen12 (Umesh)
- Code and dmesg cleanups (Andi, Jesus, Luca)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZshcfSqgfnl8Mh4P@jlahtine-mobl.ger.corp.intel.com
ARL and MTL share a single GSC firmware blob. However, ARL requires a
newer version of it.
So add differentiate of the PCI ids for ARL from MTL and create ARL as
a sub-platform of MTL. That way, all the existing workarounds and such
still treat ARL as MTL exactly as before. However, now the GSC code
can check for ARL and do an extra version check on the firmware before
committing to it.
Also, the version extraction code has various ways of failing but the
return code was being ignore and so the firmware load would attempt to
continue anyway. Fix that by propagating the return code to the next
level out.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: 213c43676b ("drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake")
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802031051.3816392-1-John.C.Harrison@Intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 67733d7a71)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Fixes: f6f4a0862b ("drm/i915/vlv_dsi: Add DMI quirk for backlight control issues on Lenovo Yoga Tab 3 (v2)")
Cc: stable@vger.kernel.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823075055.17198-1-hdegoede@redhat.com
(cherry picked from commit a4dbe45c4c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Currently, cper_print_pcie() only logs Uncorrectable Error Status, Mask
and Severity registers along with the TLP header.
If a correctable error is received immediately preceding or following an
Uncorrectable Fatal Error, its information is lost since Correctable
Error Status and Mask registers are not logged.
As such, to avoid skipping any possible error information, Correctable
Error Status and Mask registers should also be logged.
Additionally, ensure that AER information is also available through
cper_print_pcie() for Correctable and Uncorrectable Non-Fatal Errors.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Since commit cf8e865810 ("arch: Remove Itanium (IA-64) architecture"),
this is not used anymore.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Driver reads existing current value from two 8-bit registers, but then
compares only one of them with the new 16-bit value. clang W=1 is also
not happy:
twl4030_charger.c:243:16: error: variable 'cur_reg' set but not used [-Werror,-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705113113.42851-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705113113.42851-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The SC27XX fuel gauge supports a low voltage alarm IRQ, which is used
for more accurate battery capacity measurements with lower voltages.
This was unfortunately never documented in bindings, do so now.
The only in-tree user (sc2731.dtsi) has had interrupts specified
since its initial fuel-gauge submission and the current kernel
driver returns an error when no interrupt is specified, so also
add it to the required list.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/Zr3SAHlq5A78QvrW@standask-GA-A55M-S2HP
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from platform_device_id table.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240819040831.2801543-1-ruanjinjie@huawei.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Boris Sukholitko says:
====================
tc: adjust network header after 2nd vlan push
<tldr>
skb network header of the single-tagged vlan packet continues to point the
vlan payload (e.g. IP) after second vlan tag is pushed by tc act_vlan. This
causes problem at the dissector which expects double-tagged packet network
header to point to the inner vlan.
The fix is to adjust network header in tcf_act_vlan.c but requires
refactoring of skb_vlan_push function.
</tldr>
Consider the following shell script snippet configuring TC rules on the
veth interface:
ip link add veth0 type veth peer veth1
ip link set veth0 up
ip link set veth1 up
tc qdisc add dev veth0 clsact
tc filter add dev veth0 ingress pref 10 chain 0 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action goto chain 5
tc filter add dev veth0 ingress pref 20 chain 0 flower \
num_of_vlans 1 action vlan push id 100 \
protocol 0x8100 action goto chain 5
tc filter add dev veth0 ingress pref 30 chain 5 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action simple sdata "success"
Sending double-tagged vlan packet with the IP payload inside:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 64 ..........."...d
0010 81 00 00 14 08 00 45 04 00 26 04 d2 00 00 7f 11 ......E..&......
0020 18 ef 0a 00 00 01 14 00 00 02 00 00 00 00 00 12 ................
0030 e1 c7 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 10, goto rule 30 in chain 5 and correctly emit "success" to
the dmesg.
OTOH, sending single-tagged vlan packet:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 14 ..........."....
0010 08 00 45 04 00 2a 04 d2 00 00 7f 11 18 eb 0a 00 ..E..*..........
0020 00 01 14 00 00 02 00 00 00 00 00 16 e1 bf 00 00 ................
0030 00 00 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 20, will push the second vlan tag but will *not* match
rule 30. IOW, the match at rule 30 fails if the second vlan was freshly
pushed by the kernel.
Lets look at __skb_flow_dissect working on the double-tagged vlan packet.
Here is the relevant code from around net/core/flow_dissector.c:1277
copy-pasted here for convenience:
if (dissector_vlan == FLOW_DISSECTOR_KEY_MAX &&
skb && skb_vlan_tag_present(skb)) {
proto = skb->protocol;
} else {
vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
data, hlen, &_vlan);
if (!vlan) {
fdret = FLOW_DISSECT_RET_OUT_BAD;
break;
}
proto = vlan->h_vlan_encapsulated_proto;
nhoff += sizeof(*vlan);
}
The "else" clause above gets the protocol of the encapsulated packet from
the skb data at the network header location. printk debugging has showed
that in the good double-tagged packet case proto is
htons(0x800 == ETH_P_IP) as expected. However in the single-tagged packet
case proto is garbage leading to the failure to match tc filter 30.
proto is being set from the skb header pointed by nhoff parameter which is
defined at the beginning of __skb_flow_dissect
(net/core/flow_dissector.c:1055 in the current version):
nhoff = skb_network_offset(skb);
Therefore the culprit seems to be that the skb network offset is different
between double-tagged packet received from the interface and single-tagged
packet having its vlan tag pushed by TC.
Lets look at the interesting points of the lifetime of the single/double
tagged packets as they traverse our packet flow.
Both of them will start at __netif_receive_skb_core where the first vlan
tag will be stripped:
if (eth_type_vlan(skb->protocol)) {
skb = skb_vlan_untag(skb);
if (unlikely(!skb))
goto out;
}
At this stage in double-tagged case skb->data points to the second vlan tag
while in single-tagged case skb->data points to the network (eg. IP)
header.
Looking at TC vlan push action (net/sched/act_vlan.c) we have the following
code at tcf_vlan_act (interesting points are in square brackets):
if (skb_at_tc_ingress(skb))
[1] skb_push_rcsum(skb, skb->mac_len);
....
case TCA_VLAN_ACT_PUSH:
err = skb_vlan_push(skb, p->tcfv_push_proto, p->tcfv_push_vid |
(p->tcfv_push_prio << VLAN_PRIO_SHIFT),
0);
if (err)
goto drop;
break;
....
out:
if (skb_at_tc_ingress(skb))
[3] skb_pull_rcsum(skb, skb->mac_len);
And skb_vlan_push (net/core/skbuff.c:6204) function does:
err = __vlan_insert_tag(skb, skb->vlan_proto,
skb_vlan_tag_get(skb));
if (err)
return err;
skb->protocol = skb->vlan_proto;
[2] skb->mac_len += VLAN_HLEN;
in the case of pushing the second tag. Lets look at what happens with
skb->data of the single-tagged packet at each of the above points:
1. As a result of the skb_push_rcsum, skb->data is moved back to the start
of the packet.
2. First VLAN tag is moved from the skb into packet buffer, skb->mac_len is
incremented, skb->data still points to the start of the packet.
3. As a result of the skb_pull_rcsum, skb->data is moved forward by the
modified skb->mac_len, thus pointing to the network header again.
Then __skb_flow_dissect will get confused by having double-tagged vlan
packet with the skb->data at the network header.
The solution for the bug is to preserve "skb->data at second vlan header"
semantics in the skb_vlan_push function. We do this by manipulating
skb->network_header rather than skb->mac_len. skb_vlan_push callers are
updated to do skb_reset_mac_len.
More about the patch series:
* patch 1 fixes skb_vlan_push and the callers
* patch 2 adds ingress tc_actions test
* patch 3 adds egress tc_actions test
====================
Link: https://patch.msgid.link/20240822103510.468293-1-boris.sukholitko@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new test checking the correctness of inner vlan flushing to the skb
data when outer vlan tag is added through act_vlan on egress.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new test checking the correctness of inner vlan flushing to the skb
data when outer vlan tag is added through act_vlan on ingress.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
<tldr>
skb network header of the single-tagged vlan packet continues to point the
vlan payload (e.g. IP) after second vlan tag is pushed by tc act_vlan. This
causes problem at the dissector which expects double-tagged packet network
header to point to the inner vlan.
The fix is to adjust network header in tcf_act_vlan.c but requires
refactoring of skb_vlan_push function.
</tldr>
Consider the following shell script snippet configuring TC rules on the
veth interface:
ip link add veth0 type veth peer veth1
ip link set veth0 up
ip link set veth1 up
tc qdisc add dev veth0 clsact
tc filter add dev veth0 ingress pref 10 chain 0 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action goto chain 5
tc filter add dev veth0 ingress pref 20 chain 0 flower \
num_of_vlans 1 action vlan push id 100 \
protocol 0x8100 action goto chain 5
tc filter add dev veth0 ingress pref 30 chain 5 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action simple sdata "success"
Sending double-tagged vlan packet with the IP payload inside:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 64 ..........."...d
0010 81 00 00 14 08 00 45 04 00 26 04 d2 00 00 7f 11 ......E..&......
0020 18 ef 0a 00 00 01 14 00 00 02 00 00 00 00 00 12 ................
0030 e1 c7 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 10, goto rule 30 in chain 5 and correctly emit "success" to
the dmesg.
OTOH, sending single-tagged vlan packet:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 14 ..........."....
0010 08 00 45 04 00 2a 04 d2 00 00 7f 11 18 eb 0a 00 ..E..*..........
0020 00 01 14 00 00 02 00 00 00 00 00 16 e1 bf 00 00 ................
0030 00 00 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 20, will push the second vlan tag but will *not* match
rule 30. IOW, the match at rule 30 fails if the second vlan was freshly
pushed by the kernel.
Lets look at __skb_flow_dissect working on the double-tagged vlan packet.
Here is the relevant code from around net/core/flow_dissector.c:1277
copy-pasted here for convenience:
if (dissector_vlan == FLOW_DISSECTOR_KEY_MAX &&
skb && skb_vlan_tag_present(skb)) {
proto = skb->protocol;
} else {
vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
data, hlen, &_vlan);
if (!vlan) {
fdret = FLOW_DISSECT_RET_OUT_BAD;
break;
}
proto = vlan->h_vlan_encapsulated_proto;
nhoff += sizeof(*vlan);
}
The "else" clause above gets the protocol of the encapsulated packet from
the skb data at the network header location. printk debugging has showed
that in the good double-tagged packet case proto is
htons(0x800 == ETH_P_IP) as expected. However in the single-tagged packet
case proto is garbage leading to the failure to match tc filter 30.
proto is being set from the skb header pointed by nhoff parameter which is
defined at the beginning of __skb_flow_dissect
(net/core/flow_dissector.c:1055 in the current version):
nhoff = skb_network_offset(skb);
Therefore the culprit seems to be that the skb network offset is different
between double-tagged packet received from the interface and single-tagged
packet having its vlan tag pushed by TC.
Lets look at the interesting points of the lifetime of the single/double
tagged packets as they traverse our packet flow.
Both of them will start at __netif_receive_skb_core where the first vlan
tag will be stripped:
if (eth_type_vlan(skb->protocol)) {
skb = skb_vlan_untag(skb);
if (unlikely(!skb))
goto out;
}
At this stage in double-tagged case skb->data points to the second vlan tag
while in single-tagged case skb->data points to the network (eg. IP)
header.
Looking at TC vlan push action (net/sched/act_vlan.c) we have the following
code at tcf_vlan_act (interesting points are in square brackets):
if (skb_at_tc_ingress(skb))
[1] skb_push_rcsum(skb, skb->mac_len);
....
case TCA_VLAN_ACT_PUSH:
err = skb_vlan_push(skb, p->tcfv_push_proto, p->tcfv_push_vid |
(p->tcfv_push_prio << VLAN_PRIO_SHIFT),
0);
if (err)
goto drop;
break;
....
out:
if (skb_at_tc_ingress(skb))
[3] skb_pull_rcsum(skb, skb->mac_len);
And skb_vlan_push (net/core/skbuff.c:6204) function does:
err = __vlan_insert_tag(skb, skb->vlan_proto,
skb_vlan_tag_get(skb));
if (err)
return err;
skb->protocol = skb->vlan_proto;
[2] skb->mac_len += VLAN_HLEN;
in the case of pushing the second tag. Lets look at what happens with
skb->data of the single-tagged packet at each of the above points:
1. As a result of the skb_push_rcsum, skb->data is moved back to the start
of the packet.
2. First VLAN tag is moved from the skb into packet buffer, skb->mac_len is
incremented, skb->data still points to the start of the packet.
3. As a result of the skb_pull_rcsum, skb->data is moved forward by the
modified skb->mac_len, thus pointing to the network header again.
Then __skb_flow_dissect will get confused by having double-tagged vlan
packet with the skb->data at the network header.
The solution for the bug is to preserve "skb->data at second vlan header"
semantics in the skb_vlan_push function. We do this by manipulating
skb->network_header rather than skb->mac_len. skb_vlan_push callers are
updated to do skb_reset_mac_len.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The existing docs here are a bit vague. This reformats and rewords it,
and is based upon the wording originally used by the dell-laptop driver
battery documentation and also sysfs-class-power-wilco.
The wording for "Long Life" and "Bypass" remain the same, because I'm
unfamiliar with hardware that use them.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240820041942.30ed42f3@5400
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In packet offload mode, append Security Association (SA) information
to each packet, replicating the crypto offload implementation.
The XFRM_XMIT flag is set to enable packet to be returned immediately
from the validate_xmit_xfrm function, thus aligning with the existing
code path for packet offload mode.
This SA info helps HW offload match packets to their correct security
policies. The XFRM interface ID is included, which is crucial in setups
with multiple XFRM interfaces where source/destination addresses alone
can't pinpoint the right policy.
Signed-off-by: wangfe <wangfe@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently, struct snp_guest_msg includes a message header (96 bytes) and
a payload (4000 bytes). There is an implicit assumption here that the
SNP message header will always be 96 bytes, and with that assumption the
payload array size has been set to 4000 bytes - a magic number. If any
new member is added to the SNP message header, the SNP guest message
will span more than a page.
Instead of using a magic number for the payload, declare struct
snp_guest_msg in a way that payload plus the message header do not
exceed a page.
[ bp: Massage. ]
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240731150811.156771-5-nikunj@amd.com
User-visible abbreviations should be in capitals, ensure messages are
readable and clear.
No functional change.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240731150811.156771-4-nikunj@amd.com
dma_fence_chain_free() can handle NULL input, there is no need for NULL
check by caller.
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820090230.3258128-3-himal.prasad.ghimiray@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
dma_fence_put() and dma_fence_chain_free() can handle NULL input,
there is no need for NULL check by caller.
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820090230.3258128-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
drm_sched_job_add_dependency() drops references even in case of error,
no need for caller to call dma_fence_put.
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820090230.3258128-1-himal.prasad.ghimiray@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Add Netprisma LCUR57 and FCUN69 hardware revision:
LCUR57:
02:00.0 Unassigned class [ff00]: Device 203e:1000
Subsystem: Device 203e:1000
FCUN69:
02:00.0 Unassigned class [ff00]: Device 203e:1001
Subsystem: Device 203e:1001
Both of these modules create IP interfaces through MBIM.
And these modules can be checked for successful recognition through the
following command:
$ mmcli -L
/org/freedesktop/ModemManager1/Modem/0 [NetPrisma] LCUR57-WWD
$ mmcli -L
/org/freedesktop/ModemManager1/Modem/0 [NetPrisma] FCUN69-WWD
Signed-off-by: Mank Wang <mank.wang@netprisma.us>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/PH7PR22MB30386647BE2D813B502226CF81942@PH7PR22MB3038.namprd22.prod.outlook.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Let the kmemdup_array() take care about multiplication
and possible overflows.
Using kmemdup_array() is more appropriate and makes the code
easier to audit.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20240827072115.42680-1-shenlichuan@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Let the kememdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/20240822074743.1366561-1-yujiaoliang@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We forgot to release the ROC reason for ESR prevention when the remain
on channel expires.
Add this.
Fixes: a1efeb8230 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.8f8765f359cc.I16fcd6198072d422ff36dce68070aafaf011f4c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mvm_tx_skb_sta() and iwl_mvm_tx_mpdu() verify that the mvmvsta
pointer is not NULL.
It retrieves this pointer using iwl_mvm_sta_from_mac80211, which is
dereferencing the ieee80211_sta pointer.
If sta is NULL, iwl_mvm_sta_from_mac80211 will dereference a NULL
pointer.
Fix this by checking the sta pointer before retrieving the mvmsta
from it. If sta is not NULL, then mvmsta isn't either.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20240825191257.880921ce23b7.I340052d70ab6d3410724ce955eb00da10e08188f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers need to purge TX SKB when stopping. Using skb_queue_purge() can't
report TX status to mac80211, causing ieee80211_free_ack_frame() warns
"Have pending ack frames!". Export ieee80211_purge_tx_queue() for drivers
to not have to reimplement it.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240822014255.10211-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Change type of parameter @reason to enum rfkill_hard_block_reasons
for API rfkill_set_hw_state_reason() according to its comments, and
all kernel callers have invoked the API with enum type actually.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://patch.msgid.link/20240811-rfkill_fix-v2-1-9050760336f4@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Lenovo Yoga Tab 3 Pro YT3-X90 has a non functional "BCM4752" ACPI
device, which uses GPIO resources which are actually necessary / used
for the sound (codec, speaker amplifier) on the Lenovo Yoga Tab 3 Pro.
If the rfkill-gpio driver loads before the sound drivers do the sound
drivers fail to load because the GPIOs are already claimed.
Add a DMI based deny list with the Lenovo Yoga Tab 3 Pro on there and
make rfkill_gpio_probe() exit with -ENODEV for devices on the DMI based
deny list.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240825131916.6388-1-hdegoede@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This shouldn't happen at all, since in station mode all MMPDUs
go through the TXQ for the STA, and not this function. There
may or may not be a race in mac80211 through which this might
happen for some frames while a station is being added, but in
that case we can also just drop the frame and pretend the STA
didn't exist yet.
Also, the code is simply wrong since it uses deflink, and it's
not easy to fix it since the mvmvif->ap_sta pointer cannot be
used without the mutex, and perhaps the right link might not
even be known.
Just drop the frame at that point instead of trying to fix it
up.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.45ad105dc7fe.I6d45c82e5758395d9afb8854057ded03c7dc81d7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This used to extract the timeout from the debug TLV
(FW_DBG_TRIGGER_TXQ_TIMERS), which is not in use.
Cleanup iwl_mvm_get_wd_timeout to not consider the debug TLV.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240808232017.7a6944bc2e38.I532b4b5487c6be9203ff4db9742d7cc5b148d502@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We used to have the opmode configuring it to the trans according to the
debug tlv value (FW_DBG_TRIGGER_TXQ_TIMERS).
But this debug is not used, so trans can just have the default value
hardcoded.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.87af3f063025.I2222981ead13f6a917f2d4b116c5b94200dc9e51@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When processing a MCC update notification from the firmware, if
the firmware indicates that the regulatory configuration didn't
change, abort the flow and do not notify higher layers.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.60dd273d00e0.I985b3bc61ca4a6cac7c1d1365b5c0afba04f3031@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If both links are missing 5 beacons, we need to exit EMLSR, if only one
link misses beacons, we need to wait until 11 beacons are missed.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.b7785943a4fe.I70a459c5e7db85f398d5795ba83bb15f65d6bf9d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use the same handler for both types and just convert the old version to
the new. Drop the unused fields from the old one and fake the new
fields.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.a64ffc998569.I7d181052b1a69c331d07263f20c1e00cbc0bc891@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Note that the new API does not have the same notification ID as the
previous notification: the new notification belongs to the group 0x3.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.4ea52360b32e.Ibc25dcabd8aeadda906549482a6c77bc42fb55bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A new version is coming up. Rename the current struct to include the
current version.
s/iwl_missed_beacons_notif/iwl_missed_beacons_notif_v4
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.b5c3a83a05ef.I698611582b5ca8395f42a535c51f7230307e2c6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
