We have transient failures with btrfs/301, specifically in the part
where we do
for i in $(seq 0 10); do
write 50m to file
rm -f file
done
Sometimes this will result in a transient quota error, and it's because
sometimes we start writeback on the file which results in a delayed
iput, and thus the rm doesn't actually clean the file up. When we're
flushing the quota space we need to run the delayed iputs to make sure
all the unlinks that we think have completed have actually completed.
This removes the small window where we could fail to find enough space
in our quota.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Allow userspace to change the guest-visible value of the register with
different way of handling:
- Since the RAS and MPAM is not writable in the ID_AA64PFR0_EL1
register, RAS_frac and MPAM_frac are also not writable in the
ID_AA64PFR1_EL1 register.
- The MTE is controlled by a separate UAPI (KVM_CAP_ARM_MTE) with an
internal flag (KVM_ARCH_FLAG_MTE_ENABLED).
So it's not writable.
- For those fields which KVM doesn't know how to handle, they are not
exposed to the guest (being disabled in the register read accessor),
those fields value will always be 0.
Those fields don't have a known behavior now, so don't advertise
them to the userspace. Thus still not writable.
Those fields include SME, RNDR_trap, NMI, GCS, THE, DF2, PFAR,
MTE_frac, MTEX.
- The BT, SSBS, CSV2_frac don't introduce any new registers which KVM
doesn't know how to handle, they can be written without ill effect.
So let them writable.
Besides, we don't do the crosscheck in KVM about the CSV2_frac even if
it depends on the value of CSV2, it should be made sure by the VMM
instead of KVM.
Signed-off-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240723072004.1470688-4-shahuang@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently KVM use cpus_have_final_cap() to check if FEAT_SSBS is
advertised to the guest. But if FEAT_SSBS is writable and isn't
advertised to the guest, this is wrong.
Update it to use kvm_has_feat() to check if FEAT_SSBS is advertised
to the guest, thus the KVM can do the right thing if FEAT_SSBS isn't
advertised to the guest.
Signed-off-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240723072004.1470688-3-shahuang@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
For some of the fields in the ID_AA64PFR1_EL1 register, KVM doesn't know
how to handle them right now. So explicitly disable them in the register
accessor, then those fields value will be masked to 0 even if on the
hardware the field value is 1. This is safe because from a UAPI point of
view that read_sanitised_ftr_reg() doesn't yet return a nonzero value
for any of those fields.
This will benifit the migration if the host and VM have different values
when restoring a VM.
Those fields include RNDR_trap, NMI, MTE_frac, GCS, THE, MTEX, DF2, PFAR.
Signed-off-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240723072004.1470688-2-shahuang@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In Rust 1.56.0 [1], rustdoc introduced the "jump to definition"
feature [2], i.e. the unstable flag `--generate-link-to-definition`.
It adds links to the source view of the documentation.
For instance, in the source view of `rust/kernel/sync.rs`, for this code:
impl Default for LockClassKey {
fn default() -> Self {
Self::new()
}
}
It will add three hyperlinks:
- `Default` points to the rendered "Trait `core::default::Default`"
page (not the source view, since it goes to another crate, though
this may change).
- `LockClassKey` points to the `pub struct LockClassKey(...);` line
in the same page, highlighting the line number.
- `Self::new()` points to the `pub const fn new() -> Self { ... }`
associated function, highlighting its line numbers (i.e. for the
full function).
This makes the source view more useful and a bit closer to the experience
in e.g. the Elixir Cross Referencer [3].
I have provisionally enabled it for rust.docs.kernel.org [4] -- one can
take a look at the source view there for an example of how it looks like.
Thus enable it.
Cc: Guillaume Gomez <guillaume1.gomez@gmail.com>
Link: https://github.com/rust-lang/rust/pull/84176 [1]
Link: https://github.com/rust-lang/rust/issues/89095 [2]
Link: https://elixir.bootlin.com [3]
Link: https://rust.docs.kernel.org [4]
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240818141249.387166-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Clean the "Rust" main page by introducing a 'Code documentation" section
to separate it from the rest of the text above.
In addition, introduce the "Rust code documentation" term, which may be
clearer than referring to a potentially unknown tool.
Furthermore, for the HTML case, homogenize both `rustdoc` and
non-`rustdoc` cases and use the term introduced above instead.
Then, always generate the pregenerated version part, since now there
is a section that is always generated and thus makes sense to do so.
Finally, finish the new section with a link to more details about the
Rust code documentation.
The intention is that:
- The non-HTML case mentions the code documentation too, making it
more prominent for readers of non-HTML docs.
- Both HTML cases read more naturally.
- The pregenerated version is always mentioned, since it is likely
useful for readers of non-HTML docs.
Link: https://lore.kernel.org/r/20240818141200.386899-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The Rust code documentation (i.e. `rustdoc`-generated docs) is now
available at:
https://rust.docs.kernel.org
Thus document it and remove the `TODO` line.
The generation uses a particular kernel configuration, based on x86_64,
which may get tweaked over time. Older tags, and how they are generated,
may also change in the future. We may consider freezing them at some
point, but for the moment, the content should not be considered immutable.
Thanks Konstantin for the support setting it up!
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Acked-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240818141200.386899-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Running the ltp test cve-2015-3290 concurrently reports the following
warnings.
perfevents: irq loop stuck!
WARNING: CPU: 31 PID: 32438 at arch/x86/events/intel/core.c:3174
intel_pmu_handle_irq+0x285/0x370
Call Trace:
<NMI>
? __warn+0xa4/0x220
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? report_bug+0x3e/0xa0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? irq_work_claim+0x1e/0x40
? intel_pmu_handle_irq+0x285/0x370
perf_event_nmi_handler+0x3d/0x60
nmi_handle+0x104/0x330
Thanks to Thomas Gleixner's analysis, the issue is caused by the low
initial period (1) of the frequency estimation algorithm, which triggers
the defects of the HW, specifically erratum HSW11 and HSW143. (For the
details, please refer https://lore.kernel.org/lkml/87plq9l5d2.ffs@tglx/)
The HSW11 requires a period larger than 100 for the INST_RETIRED.ALL
event, but the initial period in the freq mode is 1. The erratum is the
same as the BDM11, which has been supported in the kernel. A minimum
period of 128 is enforced as well on HSW.
HSW143 is regarding that the fixed counter 1 may overcount 32 with the
Hyper-Threading is enabled. However, based on the test, the hardware
has more issues than it tells. Besides the fixed counter 1, the message
'interrupt took too long' can be observed on any counter which was armed
with a period < 32 and two events expired in the same NMI. A minimum
period of 32 is enforced for the rest of the events.
The recommended workaround code of the HSW143 is not implemented.
Because it only addresses the issue for the fixed counter. It brings
extra overhead through extra MSR writing. No related overcounting issue
has been reported so far.
Fixes: 3a632cb229 ("perf/x86/intel: Add simple Haswell PMU support")
Reported-by: Li Huafei <lihuafei1@huawei.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240819183004.3132920-1-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20240729223328.327835-1-lihuafei1@huawei.com/
nr_iovs is capped at 1024, and mode only has a few low values. We can
safely make them u16, in preparation for adding a few more members.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Expose min_wait_usec in io_uring_getevents_arg, replacing the pad member
that is currently in there. The value is in usecs, which is explained in
the name as well.
Note that if min_wait_usec and a normal timeout is used in conjunction,
the normal timeout is still relative to the base time. For example, if
min_wait_usec is set to 100 and the normal timeout is 1000, the max
total time waited is still 1000. This also means that if the normal
timeout is shorter than min_wait_usec, then only the min_wait_usec will
take effect.
See previous commit for an explanation of how this works.
IORING_FEAT_MIN_TIMEOUT is added as a feature flag for this, as
applications doing submit_and_wait_timeout() style operations will
generally not see the -EINVAL from the wait side as they return the
number of IOs submitted. Only if no IOs are submitted will the -EINVAL
bubble back up to the application.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Waiting for events with io_uring has two knobs that can be set:
1) The number of events to wake for
2) The timeout associated with the event
Waiting will abort when either of those conditions are met, as expected.
This adds support for a third event, which is associated with the number
of events to wait for. Applications generally like to handle batches of
completions, and right now they'd set a number of events to wait for and
the timeout for that. If no events have been received but the timeout
triggers, control is returned to the application and it can wait again.
However, if the application doesn't have anything to do until events are
reaped, then it's possible to make this waiting more efficient.
For example, the application may have a latency time of 50 usecs and
wanting to handle a batch of 8 requests at the time. If it uses 50 usecs
as the timeout, then it'll be doing 20K context switches per second even
if nothing is happening.
This introduces the notion of min batch wait time. If the min batch wait
time expires, then we'll return to userspace if we have any events at all.
If none are available, the general wait time is applied. Any request
arriving after the min batch wait time will cause waiting to stop and
return control to the application.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for expanding how we handle waits, move the actual
schedule and schedule_timeout() handling into a helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than need to pass in 2 or 3 separate arguments, add a struct
to encapsulate the timeout and sigset_t parts of waiting. In preparation
for adding another argument for waiting.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new registration opcode IORING_REGISTER_CLOCK, which allows the
user to select which clock id it wants to use with CQ waiting timeouts.
It only allows a subset of all posix clocks and currently supports
CLOCK_MONOTONIC and CLOCK_BOOTTIME.
Suggested-by: Lewis Baker <lewissbaker@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/98f2bc8a3c36cdf8f0e6a275245e81e903459703.1723039801.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In addition to current relative timeouts for the waiting loop, where the
timespec argument specifies the maximum time it can wait for, add
support for the absolute mode, with the value carrying a CLOCK_MONOTONIC
absolute time until which we should return control back to the user.
Suggested-by: Lewis Baker <lewissbaker@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4d5b74d67ada882590b2e42aa3aa7117bbf6b55f.1723039801.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove io_napi_adjust_timeout() and move the adjustments out of the
common path into __io_napi_busy_loop(). Now the limit it's calculated
based on struct io_wait_queue::timeout, for which we query current time
another time. The overhead shouldn't be a problem, it's a polling path,
however that can be optimised later by additionally saving the delta
time value in io_cqring_wait().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/88e14686e245b3b42ff90a3c4d70895d48676206.1723039801.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We could just move these two and save some space, but in preparation
for adding another flag, turn them into flags first.
This saves 8 bytes in struct io_buffer_list, making it exactly half
a cacheline on 64-bit archs now rather than 40 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just like what is being done on the recv side, if we only map a single
segment, then use ITER_UBUF for mapping it. That's more efficient than
using an ITER_IOVEC.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->buf_list is assigned higher up and is safe to use as we remain
within a locked region, as is the 'bl' variable itself from which it
was assigned. To improve readability, use 'bl' directly rather than
get it from the io_kiocb, if we need to increment the head directly
in the buffer selection path. This makes it readily apparent that
it's the same io_buffer_list being used.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
reverse the order of the element evaluation in an if statement.
for many users that are not using iopoll, the iopoll_list will always
evaluate to false after having made a memory access whereas to_submit is
very likely already loaded in a register.
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/052ca60b5c49e7439e4b8bd33bfab4a09d36d3d6.1722374371.git.olivier@trillion01.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for checking and coalescing multi-hugepage-backed fixed
buffers. The coalescing optimizes both time and space consumption caused
by mapping and storing multi-hugepage fixed buffers.
A coalescable multi-hugepage buffer should fully cover its folios
(except potentially the first and last one), and these folios should
have the same size. These requirements are for easier processing later,
also we need same size'd chunks in io_import_fixed for fast iov_iter
adjust.
Signed-off-by: Chenliang Li <cliang01.li@samsung.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20240731090133.4106-3-cliang01.li@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Store the folio shift and folio mask into imu struct and use it in
iov_iter adjust, as we will have non PAGE_SIZE'd chunks if a
multi-hugepage buffer get coalesced.
Signed-off-by: Chenliang Li <cliang01.li@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20240731090133.4106-2-cliang01.li@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SS is initialized to NULL during boot time and not explicitly set to
__KERNEL_DS.
With FRED enabled, if a kernel event is delivered before a CPU goes to
user level for the first time, its SS is NULL thus NULL is pushed into
the SS field of the FRED stack frame. But before ERETS is executed,
the CPU may context switch to another task and go to user level. Then
when the CPU comes back to kernel mode, SS is changed to __KERNEL_DS.
Later when ERETS is executed to return from the kernel event handler,
a #GP fault is generated because SS doesn't match the SS saved in the
FRED stack frame.
Initialize SS to __KERNEL_DS when enabling FRED to prevent that.
Note, IRET doesn't check if SS matches the SS saved in its stack frame,
thus IDT doesn't have this problem. For IDT it doesn't matter whether
SS is set to __KERNEL_DS or not, because it's set to NULL upon interrupt
or exception delivery and __KERNEL_DS upon SYSCALL. Thus it's pointless
to initialize SS for IDT.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240816104316.2276968-1-xin@zytor.com
144d:c1cc requires the same workaround to enable the speaker amp
as other Samsung models with the ALC298 codec.
Signed-off-by: YOUNGJIN JOO <neoelec@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240825092515.28728-1-neoelec@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
dma-direct.h is introduced in commit d4b6f1562a ("LoongArch: Add
Non-Uniform Memory Access (NUMA) support"). In commit c78c43fe7d
("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA"),
ARCH_HAS_PHYS_TO_DMA was deselected and the coresponding phys_to_dma()/
dma_to_phys() functions were removed. However, the unused dma-direct.h
was left behind, which is removed by this patch.
Cc: <stable@vger.kernel.org>
Fixes: c78c43fe7d ("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add new PCI IDs for Device 18h and Function 4 to enable the amd_atl driver
on those systems.
Signed-off-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/all/20240819123041.915734-1-richard.gong@amd.com
init_per_cpu_var() returns a pointer in the percpu address space while
rip_rel_ptr() expects a pointer in the generic address space.
When strict address space checks are enabled, GCC's named address space
checks fail:
asm.h:124:63: error: passing argument 1 of 'rip_rel_ptr' from
pointer to non-enclosed address space
Add a explicit cast to remove address space of the returned pointer.
Fixes: 11e36b0f7c ("x86/boot/64: Load the final kernel GDT during early boot directly, remove startup_gdt[]")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240819083334.148536-1-ubizjak@gmail.com
The cifs filesystem doesn't quite emulate FALLOC_FL_PUNCH_HOLE correctly
(note that due to lack of protocol support, it can't actually implement it
directly). Whilst it will (partially) invalidate dirty folios in the
pagecache, it doesn't write them back first, and so the EOF marker on the
server may be lower than inode->i_size.
This presents a problem, however, as if the punched hole invalidates the
tail of the locally cached dirty data, writeback won't know it needs to
move the EOF over to account for the hole punch (which isn't supposed to
move the EOF). We could just write zeroes over the punched out region of
the pagecache and write that back - but this is supposed to be a
deallocatory operation.
Fix this by manually moving the EOF over on the server after the operation
if the hole punched would corrupt it.
Note that the FSCTL_SET_ZERO_DATA RPC and the setting of the EOF should
probably be compounded to stop a third party interfering (or, at least,
massively reduce the chance).
This was reproducible occasionally by using fsx with the following script:
truncate 0x0 0x375e2 0x0
punch_hole 0x2f6d3 0x6ab5 0x375e2
truncate 0x0 0x3a71f 0x375e2
mapread 0xee05 0xcf12 0x3a71f
write 0x2078e 0x5604 0x3a71f
write 0x3ebdf 0x1421 0x3a71f *
punch_hole 0x379d0 0x8630 0x40000 *
mapread 0x2aaa2 0x85b 0x40000
fallocate 0x1b401 0x9ada 0x40000
read 0x15f2 0x7d32 0x40000
read 0x32f37 0x7a3b 0x40000 *
The second "write" should extend the EOF to 0x40000, and the "punch_hole"
should operate inside of that - but that depends on whether the VM gets in
and writes back the data first. If it doesn't, the file ends up 0x3a71f in
size, not 0x40000.
Fixes: 31742c5a33 ("enable fallocate punch hole ("fallocate -p") for SMB3")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>
rqst.rq_iter needs to be truncated otherwise we'll
also send the bytes into the stream socket...
This is the logic behind rqst.rq_npages = 0, which was removed in
"cifs: Change the I/O paths to use an iterator rather than a page list"
(d08089f649).
Cc: stable@vger.kernel.org
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This happens when called from SMB2_read() while using rdma
and reaching the rdma_readwrite_threshold.
Cc: stable@vger.kernel.org
Fixes: a6559cc1d3 ("cifs: split out smb3_use_rdma_offload() helper")
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add a method for `ARef` that is analogous to `Arc::into_raw`. It is the
inverse operation of `ARef::from_raw`, and allows you to convert the
`ARef` back into a raw pointer while retaining ownership of the
refcount.
This new function will be used by [1] for converting the type in an
`ARef` using `ARef::from_raw(ARef::into_raw(me).cast())`. Alice has
also needed the same function for other use-cases in the past, but [1]
is the first to go upstream.
This was implemented independently by Kartik and Alice. The two versions
were merged by Alice, so all mistakes are Alice's.
Link: https://lore.kernel.org/r/20240801-vma-v3-1-db6c1c0afda9@google.com [1]
Link: https://github.com/Rust-for-Linux/linux/issues/1044
Signed-off-by: Kartik Prajapati <kartikprajapati987@gmail.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
[ Reworded to correct the author reference and changed tag to Link
since it is not a bug. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Use links to docs.kernel.org instead of www.kernel.org/doc/html/latest
in the code documentation. The links are shorter and cleaner.
Link: https://github.com/Rust-for-Linux/linux/issues/1101
Signed-off-by: Michael Vetter <jubalh@iodoru.org>
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When SGX is not supported by the BIOS, the kernel log contains the error
'SGX disabled by BIOS', which can be confusing since there might not be an
SGX-related option in the BIOS settings.
For the kernel it's difficult to distinguish between the BIOS not
supporting SGX and the BIOS supporting SGX but having it disabled.
Therefore, update the error message to 'SGX disabled or unsupported by
BIOS' to make it easier for those reading kernel logs to understand what's
happening.
Reported-by: Bo Wu <wubo@uniontech.com>
Co-developed-by: Zelong Xiang <xiangzelong@uniontech.com>
Signed-off-by: Zelong Xiang <xiangzelong@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/F8D977CB368423F3+20240825104653.1294624-1-wangyuli@uniontech.com
Closes: https://github.com/linuxdeepin/developer-center/issues/10032
The current assembly around swap_pages() in the relocate_kernel() takes
some time to follow because the use of registers can be easily lost when
the line of assembly goes long. Add a couple of comments to clarify the
code around swap_pages() to improve readability.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/8b52b0b8513a34b2a02fb4abb05c6700c2821475.1724573384.git.kai.huang@intel.com
When relocate_kernel() gets called, %rdi holds 'indirection_page' and
%rsi holds 'page_list'. And %rdi always holds 'indirection_page' when
swap_pages() is called.
Therefore the comment of the first line code of swap_pages()
movq %rdi, %rcx /* Put the page_list in %rcx */
.. isn't correct because it actually moves the 'indirection_page' to
the %rcx. Fix it.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/adafdfb1421c88efce04420fc9a996c0e2ca1b34.1724573384.git.kai.huang@intel.com
Building the SGX code with W=1 generates below warning:
arch/x86/kernel/cpu/sgx/main.c:741: warning: Function parameter or
struct member 'low' not described in 'sgx_calc_section_metric'
arch/x86/kernel/cpu/sgx/main.c:741: warning: Function parameter or
struct member 'high' not described in 'sgx_calc_section_metric'
...
The function sgx_calc_section_metric() is a simple helper which is only
used in sgx/main.c. There's no need to use kernel-doc style comment for
it.
Downgrade to a normal comment.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240825080649.145250-1-kai.huang@intel.com
The area at the 0x0FFFD9 physical location in the PC memory space is
regular memory, traditionally ROM BIOS and more recently a copy of BIOS
code and data in RAM, write-protected.
Therefore use memremap() to get access to it rather than ioremap(),
avoiding issues in virtualization scenarios and complementing changes such
as commit f7750a7956 ("x86, mpparse, x86/acpi, x86/PCI, x86/dmi, SFI: Use
memremap() for RAM mappings") or commit 5997efb967 ("x86/boot: Use
memremap() to map the MPF and MPC data").
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/alpine.DEB.2.21.2408242025210.30766@angie.orcam.me.uk
Closes: https://lore.kernel.org/r/20240822095122.736522-1-kirill.shutemov@linux.intel.com
mtrr_bp_restore() has been removed in commit 0b9a6a8bed ("x86/mtrr: Add a
stop_machine() handler calling only cache_cpu_init()"), but the declaration
was left behind. Remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240824120234.2516830-1-cuigaosheng1@huawei.com
After a recent LLVM change that deduces __cold on functions that only call
cold code (such as __init functions), there is a section mismatch warning
from percpu_setup_exception_stacks(), which got moved to .text.unlikely. as
a result of that optimization:
WARNING: modpost: vmlinux: section mismatch in reference:
percpu_setup_exception_stacks+0x3a (section: .text.unlikely.) ->
cea_map_percpu_pages (section: .init.text)
Drop the inline keyword, which does not guarantee inlining, and replace it
with __init, as percpu_setup_exception_stacks() is only called from __init
code, which clears up the warning.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240822-x86-percpu_setup_exception_stacks-init-v1-1-57c5921b8209@kernel.org
There can be multiple role switch devices running on a platform. Given
that lockdep is not capable of differentiating between locks of
different instances, false positive warnings for circular locking are
reported. To prevent this, register unique lockdep key for each of the
individual instances.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20240822223717.253433-1-amitsd@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240822130113.164644-5-liaochen4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240822130113.164644-4-liaochen4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240822130113.164644-3-liaochen4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240822130113.164644-2-liaochen4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
