Align with the datasheet by adding regulator-5v which
supplies each node from the regulator using phandle to
regulator-5v through pvin[1-4]-supply and lvin-supply.
Co-developed-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240812135231.43744-8-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Align with the datasheet by adding regulator-5v which
supplies each node from the regulator using phandle to
regulator-5v through pvin[1-4]-supply and lvin-supply.
Co-developed-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240812135231.43744-7-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Align with the datasheet by adding regulator-5v which
supplies each node from the regulator using phandle to
regulator-5v through pvin[1-4]-supply and lvin-supply.
Co-developed-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240812135231.43744-6-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Align with the datasheet by adding regulator-5v which
supplies each node from the regulator using phandle to
regulator-5v through pvin[1-4]-supply and lvin-supply.
Co-developed-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240812135231.43744-5-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Align with the datasheet by adding regulator-5v which supplies
each node from the regulator using phandle to regulator-5v
through pvin[1-4]-supply and lvin-supply.
Co-developed-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240812135231.43744-4-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The old quirk combination sometimes cause a laggy keyboard after boot. With
the new quirk the initial issue of an unresponsive keyboard after s3 resume
is also fixed, but it doesn't have the negative side effect of the
sometimes laggy keyboard.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104183118.779778-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On s3 resume the i8042 driver tries to restore the controller to a known
state by reinitializing things, however this can confuse the controller
with different effects. Mostly occasionally unresponsive keyboards after
resume.
These issues do not rise on s0ix resume as here the controller is assumed
to preserved its state from before suspend.
This patch adds a quirk for devices where the reinitialization on s3 resume
is not needed and might be harmful as described above. It does this by
using the s0ix resume code path at selected locations.
This new quirk goes beyond what the preexisting reset=never quirk does,
which only skips some reinitialization steps.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104183118.779778-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We are checking cp_irq_count from the wrong hdcp structure which
ends up giving timed out errors. We only increment the cp_irq_count
of the primary connector's hdcp structure but here in case of
multidisplay setup we end up checking the secondary connector's hdcp
structure, which will not have its cp_irq_count incremented. This leads
to a timed out at CP_IRQ error even though a CP_IRQ was raised. Extract
it from the correct intel_hdcp structure.
--v2
-Explain why it was the wrong hdcp structure [Jani]
Fixes: 8c9e4f68b8 ("drm/i915/hdcp: Use per-device debugs")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809114127.3940699-2-suraj.kandpal@intel.com
(cherry picked from commit dd92590263)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The csr_fun defines a count parameter which defines the total number
CSRs emulated in KVM starting from the base. This value should be
equal to total number of counters possible for trap/emulation (32).
Fixes: a9ac6c3752 ("RISC-V: KVM: Implement trap & emulate for hpmcounters")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240816-kvm_pmu_fixes-v1-2-cdfce386dd93@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, KVM traps & emulates PMU counter access only if SBI PMU
is available as the guest can only configure/read PMU counters via
SBI only. However, if SBI PMU is not enabled in the host, the
guest will fallback to the legacy PMU which will try to access
cycle/instret and result in an illegal instruction trap which
is not desired.
KVM can allow dummy emulation of cycle/instret only for the guest
if SBI PMU is not enabled in the host. The dummy emulation will
still return zero as we don't to expose the host counter values
from a guest using legacy PMU.
Fixes: a9ac6c3752 ("RISC-V: KVM: Implement trap & emulate for hpmcounters")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240816-kvm_pmu_fixes-v1-1-cdfce386dd93@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
With the latest Linux-6.11-rc3, the below NULL pointer crash is observed
when SBI PMU snapshot is enabled for the guest and the guest is forcefully
powered-off.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000508
Oops [#1]
Modules linked in: kvm
CPU: 0 UID: 0 PID: 61 Comm: term-poll Not tainted 6.11.0-rc3-00018-g44d7178dd77a #3
Hardware name: riscv-virtio,qemu (DT)
epc : __kvm_write_guest_page+0x94/0xa6 [kvm]
ra : __kvm_write_guest_page+0x54/0xa6 [kvm]
epc : ffffffff01590e98 ra : ffffffff01590e58 sp : ffff8f80001f39b0
gp : ffffffff81512a60 tp : ffffaf80024872c0 t0 : ffffaf800247e000
t1 : 00000000000007e0 t2 : 0000000000000000 s0 : ffff8f80001f39f0
s1 : 00007fff89ac4000 a0 : ffffffff015dd7e8 a1 : 0000000000000086
a2 : 0000000000000000 a3 : ffffaf8000000000 a4 : ffffaf80024882c0
a5 : 0000000000000000 a6 : ffffaf800328d780 a7 : 00000000000001cc
s2 : ffffaf800197bd00 s3 : 00000000000828c4 s4 : ffffaf800248c000
s5 : ffffaf800247d000 s6 : 0000000000001000 s7 : 0000000000001000
s8 : 0000000000000000 s9 : 00007fff861fd500 s10: 0000000000000001
s11: 0000000000800000 t3 : 00000000000004d3 t4 : 00000000000004d3
t5 : ffffffff814126e0 t6 : ffffffff81412700
status: 0000000200000120 badaddr: 0000000000000508 cause: 000000000000000d
[<ffffffff01590e98>] __kvm_write_guest_page+0x94/0xa6 [kvm]
[<ffffffff015943a6>] kvm_vcpu_write_guest+0x56/0x90 [kvm]
[<ffffffff015a175c>] kvm_pmu_clear_snapshot_area+0x42/0x7e [kvm]
[<ffffffff015a1972>] kvm_riscv_vcpu_pmu_deinit.part.0+0xe0/0x14e [kvm]
[<ffffffff015a2ad0>] kvm_riscv_vcpu_pmu_deinit+0x1a/0x24 [kvm]
[<ffffffff0159b344>] kvm_arch_vcpu_destroy+0x28/0x4c [kvm]
[<ffffffff0158e420>] kvm_destroy_vcpus+0x5a/0xda [kvm]
[<ffffffff0159930c>] kvm_arch_destroy_vm+0x14/0x28 [kvm]
[<ffffffff01593260>] kvm_destroy_vm+0x168/0x2a0 [kvm]
[<ffffffff015933d4>] kvm_put_kvm+0x3c/0x58 [kvm]
[<ffffffff01593412>] kvm_vm_release+0x22/0x2e [kvm]
Clearly, the kvm_vcpu_write_guest() function is crashing because it is
being called from kvm_pmu_clear_snapshot_area() upon guest tear down.
To address the above issue, simplify the kvm_pmu_clear_snapshot_area() to
not zero-out PMU snapshot area from kvm_pmu_clear_snapshot_area() because
the guest is anyway being tore down.
The kvm_pmu_clear_snapshot_area() is also called when guest changes
PMU snapshot area of a VCPU but even in this case the previous PMU
snaphsot area must not be zeroed-out because the guest might have
reclaimed the pervious PMU snapshot area for some other purpose.
Fixes: c2f41ddbcd ("RISC-V: KVM: Implement SBI PMU Snapshot feature")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20240815170907.2792229-1-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
- Use i_size instead of i_size_read() due to immutable fses;
- Get rid of an unneeded goto since erofs_fill_dentries() also works;
- Remove unnecessary lines.
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240801112622.2164029-1-hongzhen@linux.alibaba.com
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
When forwarding SBI calls to userspace ensure sbiret.error is
initialized to SBI_ERR_NOT_SUPPORTED first, in case userspace
neglects to set it to anything. If userspace neglects it then we
can't be sure it did anything else either, so we just report it
didn't do or try anything. Just init sbiret.value to zero, which is
the preferred value to return when nothing special is specified.
KVM was already initializing both sbiret.error and sbiret.value, but
the values used appear to come from a copy+paste of the __sbi_ecall()
implementation, i.e. a0 and a1, which don't apply prior to the call
being executed, nor at all when forwarding to userspace.
Fixes: dea8ee31a0 ("RISC-V: KVM: Add SBI v0.1 support")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240807154943.150540-2-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Replace the deprecated one-element arrays with flexible-array members
in the structs filesystem_attribute_info and filesystem_device_info.
There are no binary differences after this conversion.
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are a couple of spelling mistakes in the documentation. This patch
fixes them.
Signed-off-by: Victor Timofei <victor@vtimothy.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If there is ->PreviousSessionId field in the session setup request,
The session of the previous connection should be destroyed.
During this, if the smb2 operation requests in the previous session are
being processed, a racy issue could happen with ksmbd_destroy_file_table().
This patch sets conn->status to KSMBD_SESS_NEED_RECONNECT to block
incoming operations and waits until on-going operations are complete
(i.e. idle) before desctorying the previous session.
Fixes: c8efcc7861 ("ksmbd: add support for durable handles v1/v2")
Cc: stable@vger.kernel.org # v6.6+
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-25040
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
rsp buffer is allocated larger than spnego_blob from
smb2_allocate_rsp_buf().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Mandatory locking is enforced for cached reads, which violates
default posix semantics, and also it is enforced inconsistently.
This affected recent versions of libreoffice, and can be
demonstrated by opening a file twice from the same client,
locking it from handle one and trying to read from it from
handle two (which fails, returning EACCES).
There is already a mount option "forcemandatorylock"
(which defaults to off), so with this change only when the user
intentionally specifies "forcemandatorylock" on mount will we
break posix semantics on read to a locked range (ie we will
only fail in this case, if the user mounts with
"forcemandatorylock").
An earlier patch fixed the write path.
Fixes: 85160e03a7 ("CIFS: Implement caching mechanism for mandatory brlocks")
Cc: stable@vger.kernel.org
Cc: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reported-by: abartlet@samba.org
Reported-by: Kevin Ottens <kevin.ottens@enioka.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now that we should be `objtool`-warning free, enable `objtool` for
Rust too.
Before this patch series, we were already getting warnings under e.g. IBT
builds, since those would see Rust code via `vmlinux.o`.
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240725183325.122827-7-ojeda@kernel.org
[ Solved trivial conflict. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust functions may be `noreturn` (i.e. diverging) by returning the
"never" type, `!`, e.g.
fn f() -> ! {
loop {}
}
Thus list the known `noreturn` functions to avoid such warnings.
Without this, `objtool` would complain if enabled for Rust, e.g.:
rust/core.o: warning: objtool:
_R...9panic_fmt() falls through to next function _R...18panic_nounwind_fmt()
rust/alloc.o: warning: objtool:
.text: unexpected end of section
In order to do so, we cannot match symbols' names exactly, for two
reasons:
- Rust mangling scheme [1] contains disambiguators [2] which we
cannot predict (e.g. they may vary depending on the compiler version).
One possibility to solve this would be to parse v0 and ignore/zero
those before comparison.
- Some of the diverging functions come from `core`, i.e. the Rust
standard library, which may change with each compiler version
since they are implementation details (e.g. `panic_internals`).
Thus, to workaround both issues, only part of the symbols are matched,
instead of using the `NORETURN` macro in `noreturns.h`.
Ideally, just like for the C side, we should have a better solution. For
instance, the compiler could give us the list via something like:
$ rustc --emit=noreturns ...
[ Kees agrees this should be automated and Peter says:
So it would be fairly simple to make objtool consume a magic section
emitted by the compiler.. I think we've asked the compiler folks
for that at some point even, but I don't have clear recollections.
We will ask upstream Rust about it. And if they agree, then perhaps
we can get Clang/GCC to implement something similar too -- for this
sort of thing we can take advantage of the shorter cycles of `rustc`
as well as their unstable features concept to experiment.
Gary proposed using DWARF (though it would need to be available), and
wrote a proof of concept script using the `object` and `gimli` crates:
https://gist.github.com/nbdd0121/449692570622c2f46a29ad9f47c3379a
- Miguel ]
Link: https://rust-lang.github.io/rfcs/2603-rust-symbol-name-mangling-v0.html [1]
Link: https://doc.rust-lang.org/rustc/symbol-mangling/v0.html#disambiguator [2]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240725183325.122827-6-ojeda@kernel.org
[ Added `len_mismatch_fail` symbol for new `kernel` crate code merged
since then as well as 3 more `core::panicking` symbols that appear
in `RUST_DEBUG_ASSERTIONS=y` builds. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Support `MITIGATION_SLS` by enabling the target features that Clang does.
Without this, `objtool` would complain if enabled for Rust, e.g.:
rust/core.o: warning: objtool:
_R...next_up+0x44: missing int3 after ret
These should be eventually enabled via `-Ctarget-feature` when `rustc`
starts recognizing them (or via a new dedicated flag) [1].
Link: https://github.com/rust-lang/rust/issues/116851 [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240725183325.122827-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The Rust compiler added support for `-Zfunction-return=thunk-extern` [1]
in 1.76.0 [2], i.e. the equivalent of `-mfunction-return=thunk-extern`.
Thus add support for `MITIGATION_RETHUNK`.
Without this, `objtool` would warn if enabled for Rust and already warns
under IBT builds, e.g.:
samples/rust/rust_print.o: warning: objtool:
_R...init+0xa5c: 'naked' return found in RETHUNK build
Link: https://github.com/rust-lang/rust/issues/116853 [1]
Link: https://github.com/rust-lang/rust/pull/116892 [2]
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://github.com/Rust-for-Linux/linux/issues/945
Link: https://lore.kernel.org/r/20240725183325.122827-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Support `MITIGATION_RETPOLINE` by enabling the target features that
Clang does.
The existing target feature being enabled was a leftover from
our old `rust` branch, and it is not enough: the target feature
`retpoline-external-thunk` only implies `retpoline-indirect-calls`, but
not `retpoline-indirect-branches` (see LLVM's `X86.td`), unlike Clang's
flag of the same name `-mretpoline-external-thunk` which does imply both
(see Clang's `lib/Driver/ToolChains/Arch/X86.cpp`).
Without this, `objtool` would complain if enabled for Rust, e.g.:
rust/core.o: warning: objtool:
_R...escape_default+0x13: indirect jump found in RETPOLINE build
In addition, change the comment to note that LLVM is the one disabling
jump tables when retpoline is enabled, thus we do not need to use
`-Zno-jump-tables` for Rust here -- see commit c58f2166ab39 ("Introduce
the "retpoline" x86 mitigation technique ...") [1]:
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In
many cases, the compiler can simply use directed conditional
branches and a small search tree. LLVM already has support for
lowering switches in this way and the first step of this patch is
to disable jump-table lowering of switches and introduce a pass to
rewrite explicit indirectbr sequences into a switch over integers.
As well as a live example at [2].
These should be eventually enabled via `-Ctarget-feature` when `rustc`
starts recognizing them (or via a new dedicated flag) [3].
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: c58f2166ab [1]
Link: https://godbolt.org/z/G4YPr58qG [2]
Link: https://github.com/rust-lang/rust/issues/116852 [3]
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/945
Link: https://lore.kernel.org/r/20240725183325.122827-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the equivalent of the `___ADDRESSABLE()` annotation in the
`module_{init,exit}` macros to the Rust `module!` macro.
Without this, `objtool` would complain if enabled for Rust (under IBT
builds), e.g.:
samples/rust/rust_print.o: warning: objtool: cleanup_module(): not an indirect call target
samples/rust/rust_print.o: warning: objtool: init_module(): not an indirect call target
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240725183325.122827-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This patch splits up the rust helpers C file. When rebasing patch sets on
upstream linux, merge conflicts in helpers.c is common and time consuming
[1]. Thus, split the file so that each kernel component can live in a
separate file.
This patch lists helper files explicitly and thus conflicts in the file
list is still likely. However, they should be more simple to resolve than
the conflicts usually seen in helpers.c.
[ Removed `README.md` and undeleted the original comment since now,
in v3 of the series, we have a `helpers.c` again; which also allows
us to keep the "Sorted alphabetically" line and makes the diff easier.
In addition, updated the Documentation/ mentions of the file, reworded
title and removed blank lines at the end of `page.c`. - Miguel ]
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/288089-General/topic/Splitting.20up.20helpers.2Ec/near/426694012 [1]
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240815103016.2771842-1-nmi@metaspace.dk
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When enabling Rust in the kernel, we only need to block on the
RANDSTRUCT feature and GCC plugin. The rest of the GCC plugins
are reasonably safe to enable.
[ Originally (years ago) we only had this restriction, but we ended up
restricting also the rest of the GCC plugins 1) to be on the safe side,
2) since compiler plugin support could be going away in the kernel and
3) since mixed builds are best effort so far; so I asked Neal about
his experience enabling the other plugins -- Neal says:
When I originally wrote this patch two years ago to get things
working, Fedora used all the GCC plugins, so I was trying to get GCC +
Rust to work while minimizing the delta on build differences. This was
the combination that worked. We've been carrying this patch in the
Asahi tree for a year now. And while Fedora does not currently have
GCC plugins enabled because it caused issues with some third-party
modules (I think it was the NVIDIA driver, but I'm not sure), it was
around long enough for me to know with some confidence that it was
fine this way.
- Miguel ]
Signed-off-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20240731125615.3368813-1-neal@gompa.dev
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
For the new Rust support for 32-bit arm [1], Clippy warns:
error: useless conversion to the same type: `i32`
--> rust/kernel/error.rs:139:36
|
139 | unsafe { bindings::ERR_PTR(self.0.into()) as *mut _ }
| ^^^^^^^^^^^^^ help: consider removing `.into()`: `self.0`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_conversion
= note: `-D clippy::useless-conversion` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::useless_conversion)]`
The `self.0.into()` converts an `c_int` into `ERR_PTR`'s parameter
which is a `c_long`. Thus, both types are `i32` in 32-bit. Therefore,
allow it for those architectures.
Link: https://lore.kernel.org/rust-for-linux/2dbd1491-149d-443c-9802-75786a6a3b73@gmail.com/ [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: https://lore.kernel.org/r/20240730155702.1110144-1-ojeda@kernel.org
[ Fixed typo in tag. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There are no guarantees for the pointer returned by `into_foreign`.
This is simply because there is no safety documentation stating any
guarantees. Therefore dereferencing and all other operations for that
pointer are not allowed in a general context (i.e. when the concrete
type implementing the trait is not known).
This might be confusing, therefore add normal documentation to state
that there are no guarantees given for the pointer.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240730182251.1466684-1-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
We already implement ForeignOwnable for Box<T>, but it may be useful to
store pinned data in a ForeignOwnable container. This patch makes that
possible.
This will be used together with upcoming miscdev abstractions, which
Binder will use when binderfs is disabled.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240730-foreign-ownable-pin-box-v1-1-b1d70cdae541@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
For pinned and unpinned initialization of structs, a trait named
`InPlaceInit` exists for uniform access. `Arc` did not implement
`InPlaceInit` yet, although the functions already existed. The main
reason for that, was that the trait itself returned a `Pin<Self>`. The
`Arc` implementation of the kernel is already implicitly pinned.
To enable `Arc` to implement `InPlaceInit` and to have uniform access,
for in-place and pinned in-place initialization, an associated type is
introduced for `InPlaceInit`. The new implementation of `InPlaceInit`
for `Arc` sets `Arc` as the associated type. Older implementations use
an explicit `Pin<T>` as the associated type. The implemented methods for
`Arc` are mostly moved from a direct implementation on `Arc`. There
should be no user impact. The implementation for `ListArc` is omitted,
because it is not merged yet.
Link: https://github.com/Rust-for-Linux/linux/issues/1079
Signed-off-by: Alex Mantel <alexmantel93@mailbox.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240727042442.682109-1-alexmantel93@mailbox.org
[ Removed "Rusts" (Benno). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Override default maximum RX timeout with the value picked from the
devicetree, when provided.
Suggested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Message-Id: <20240730144707.1647025-4-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
System Controller Management Interface(SCMI) firmwares might have different
designs depending on the platform: the maximum receive channel timeout
value might vary depending on the specific underlying hardware and firmware
design choices.
Introduce the general property max-rx-timeout-ms property to describe the
transport needs of a specific platform design.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
[Cristian: reworded commit message, s/mailbox/transport in description]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Message-Id: <20240730144707.1647025-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The descriptor structure scmi_desc contains a variety of fields related to
the transport functionalities and it is defined by the transport drivers
themselves; such elements, though, serve varied purposes and have different
lifetime.
In particular, while there are some of those elements that provide a
description of transport features that are supposed to be immutable, on
the other side there are present also some other characteristics that are
instead supposed to be configurable on a per-platform base since they
represent configuration features tied to the specific hardware/firmware
system.
The immutable fields are already qualified as const on the their own; get
rid of the structure-level const qualifier which is not needed, so as to
enable possible runtime customization of the mutable configuration
features.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Message-Id: <20240730144707.1647025-2-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240816151407.155034-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Here are 2 driver fixes for regressions from 6.11-rc1 due to the driver
core change making a structure in a driver core callback const. These
were missed by all testing EXCEPT for what Bart happened to be running,
so I appreciate the fixes provided here for some odd/not-often-used
driver subsystems that nothing else happened to catch.
Both of these fixes have been in linux-next all week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIWNA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylHBgCdGDGhaQp4W/dLejZBeMtuGLILTcoAnRm7/Aj8
U/uR4ukttCXjfvjlalxi
=t+bl
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for regressions from 6.11-rc1 due to the
driver core change making a structure in a driver core callback const.
These were missed by all testing EXCEPT for what Bart happened to be
running, so I appreciate the fixes provided here for some
odd/not-often-used driver subsystems that nothing else happened to
catch.
Both of these fixes have been in linux-next all week with no reported
issues"
* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mips: sgi-ip22: Fix the build
ARM: riscpc: ecard: Fix the build
Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are "obviously correct" so will be safe :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIT4A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymYQACfeV6tIMHlHSVS9VSbiXHJAovjvFEAoLQvuvBS
0dN1Q4iYF+5Sy4JWAZb/
=ztLK
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc fixes from Greg KH:
"Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are 'obviously correct' so will be safe :)"
* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
char: xillybus: Check USB endpoints when probing device
char: xillybus: Refine workqueue handling
Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
char: xillybus: Don't destroy workqueue from work item running on it
Here are some small tty and serial driver fixes for 6.11-rc4 to resolve
some reported problems. Included in here are:
- conmakehash.c userspace build issues
- fsl_lpuart driver fix
- 8250_omap revert for reported regression
- atmel_serial rts flag fix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIUhw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymHUACdHhcerkgnsJxwy4pUTbH1mjCsQ40AniqUkc/l
5bShqqmhDP1Y5zh7D5w5
=rdx/
-----END PGP SIGNATURE-----
Merge tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.11-rc4 to
resolve some reported problems. Included in here are:
- conmakehash.c userspace build issues
- fsl_lpuart driver fix
- 8250_omap revert for reported regression
- atmel_serial rts flag fix
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
tty: atmel_serial: use the correct RTS flag.
tty: vt: conmakehash: remove non-portable code printing comment header
tty: serial: fsl_lpuart: mark last busy before uart_add_one_port
'inline' keyword is only a recommendation for compiler. If it decides to
not inline nodemask functions, the whole small_const_nbits() machinery
doesn't work.
This is how a standard GCC 11.3.0 does for my x86_64 build now. This patch
replaces 'inline' directive with unconditional '__always_inline' to make
sure that there's always a chance for compile-time optimization. It doesn't
change size of kernel image, according to bloat-o-meter.
[[ Brian: split out from:
Subject: [PATCH 1/3] bitmap: switch from inline to __always_inline
https://lore.kernel.org/all/20221027043810.350460-2-yury.norov@gmail.com/
But rewritten, as there were too many conflicts. ]]
Co-developed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
On recent (v6.6+) builds with Clang (based on Clang 18.0.0) and certain
configurations [0], I'm finding that (lack of) inlining decisions may
lead to section mismatch warnings like the following:
WARNING: modpost: vmlinux.o: section mismatch in reference:
cpumask_andnot (section: .text) ->
cpuhp_bringup_cpus_parallel.tmp_mask (section: .init.data) ERROR:
modpost: Section mismatches detected.
or more confusingly:
WARNING: modpost: vmlinux: section mismatch in reference:
cpumask_andnot+0x5f (section: .text) -> efi_systab_phys (section:
.init.data)
The first warning makes a little sense, because
cpuhp_bringup_cpus_parallel() (an __init function) calls
cpumask_andnot() on tmp_mask (an __initdata symbol). If the compiler
doesn't inline cpumask_andnot(), this may appear like a mismatch.
The second warning makes less sense, but might be because efi_systab_phys
and cpuhp_bringup_cpus_parallel.tmp_mask are laid out near each other,
and the latter isn't a proper C symbol definition.
In any case, it seems a reasonable solution to suggest more strongly to
the compiler that these cpumask macros *must* be inlined, as 'inline' is
just a recommendation.
This change has been previously proposed in the past as:
Subject: [PATCH 1/3] bitmap: switch from inline to __always_inline
https://lore.kernel.org/all/20221027043810.350460-2-yury.norov@gmail.com/
But the change has been split up, to separately justify the cpumask
changes (which drive my work) and the bitmap/const optimizations (that
Yury separately proposed for other reasons). This ends up as somewhere
between a "rebase" and "rewrite" -- I had to rewrite most of the patch.
According to bloat-o-meter, vmlinux decreases minimally in size (-0.00%
to -0.01%, depending on the version of GCC or Clang and .config in
question) with this series of changes:
gcc 13.2.0, x86_64_defconfig
-3005 bytes, Before=21944501, After=21941496, chg -0.01%
clang 16.0.6, x86_64_defconfig
-105 bytes, Before=22571692, After=22571587, chg -0.00%
gcc 9.5.0, x86_64_defconfig
-1771 bytes, Before=21557598, After=21555827, chg -0.01%
clang 18.0_pre516547 (ChromiumOS toolchain), x86_64_defconfig
-191 bytes, Before=22615339, After=22615148, chg -0.00%
clang 18.0_pre516547 (ChromiumOS toolchain), based on ChromiumOS config + gcov
-979 bytes, Before=76294783, After=76293804, chg -0.00%
[0] CONFIG_HOTPLUG_PARALLEL=y ('select'ed for x86 as of [1]) and
CONFIG_GCOV_PROFILE_ALL.
[1] commit 0c7ffa32db ("x86/smpboot/64: Implement
arch_cpuhp_init_parallel_bringup() and enable it")
Co-developed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
'inline' keyword is only a recommendation for compiler. If it decides to
not inline bitmap functions, the whole small_const_nbits() machinery
doesn't work.
This is how a standard GCC 11.3.0 does for my x86_64 build now. This patch
replaces 'inline' directive with unconditional '__always_inline' to make
sure that there's always a chance for compile-time optimization. It doesn't
change size of kernel image, according to bloat-o-meter.
[[ Brian: split out from:
Subject: [PATCH 1/3] bitmap: switch from inline to __always_inline
https://lore.kernel.org/all/20221027043810.350460-2-yury.norov@gmail.com/
But rewritten, as there were too many conflicts. ]]
Co-developed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
