'inline' keyword is only a recommendation for compiler. If it decides to
not inline find_bit nodemask functions, the whole small_const_nbits()
machinery doesn't work.
This is how a standard GCC 11.3.0 does for my x86_64 build now. This patch
replaces 'inline' directive with unconditional '__always_inline' to make
sure that there's always a chance for compile-time optimization. It doesn't
change size of kernel image, according to bloat-o-meter.
[[ Brian: split out from:
Subject: [PATCH 1/3] bitmap: switch from inline to __always_inline
https://lore.kernel.org/all/20221027043810.350460-2-yury.norov@gmail.com/
But rewritten, as there were too many conflicts. ]]
Co-developed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
resolve some reported issues. Included in here are:
- thunderbolt driver fixes for reported problems
- typec driver fixes
- xhci fixes
- new device id for ljca usb driver
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIVPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykXZQCgtIX9QomJztpybexiFP70JJrGksMAn3SHFdHG
Fp1XVUssS8asP7H0M2iE
=m7n6
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
resolve some reported issues. Included in here are:
- thunderbolt driver fixes for reported problems
- typec driver fixes
- xhci fixes
- new device id for ljca usb driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
usb: typec: ucsi: Fix the return value of ucsi_run_command()
usb: xhci: fix duplicate stall handling in handle_tx_event()
usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
thunderbolt: Mark XDomain as unplugged when router is removed
thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmbB6dwACgkQxWXV+ddt
WDu/Eg/9EXEoSPqRYxsRa2vLQjSbBbBCBDW1G75F5oUsvRKtfNhZ+w02JAqubirF
wdBNaXoGQ9zJq/E0JtHHDqv9M6FV+g3aO0xM+ntmp9cZdFBVXRkrB3TlewMesKfI
lXZW5kn35q6aeNi2MaJjk2G5Pr0MYjGGRezBuloc7TcIlgVijjLBlcnKEz263C1/
rXvENxowxPA20LiWviA4ZjlqlRQLBrgxqpSXLGg7mZs93XdbtPa2ZvzS7ffuZTI+
PUCYGEwI4E2Dpv+mswFb21SUdUPPmAycubERJvABqnZxCWupkevgvv+6MeWC5A2p
7OjoTmINRDDsNWYSvyHQ04U+0XkPmHCBKEkAuy0ZIajHJU4G6rpeDySX04/Cwzht
mJZ37FzMGZ9LjEpL1uoPifWKcH0nUW9sWw4Tw9tgeuBG9RfI/BxZqRT9WLEkiXUI
7Bdq2Ir6fzv8IVKWkuqO6No+LDa//qF2ci0nWvCwbgdNquGFa9DmNmVDiKDqKW3R
RlP+6laXEPCfKSycTpp94gASVeEEcKNYYC0B/FCBLJmXVcCJQ41qsMn/fYUn8Yn3
vVdmAuGKThYjO4RNjqy4FgNVLdY9280OGazH0B9t3HhL+U+9JLN8fnhD5H4hEpR/
dDC1quKmo6WIKAem6O6r3GRnCj8lbLaXpmp+MpyEUI7M5FyjsAc=
=YBfJ
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A more fixes. We got reports that shrinker added in 6.10 still causes
latency spikes and the fixes don't handle all corner cases. Due to
summer holidays we're taking a shortcut to disable it for release
builds and will fix it in the near future.
- only enable extent map shrinker for DEBUG builds, temporary quick
fix to avoid latency spikes for regular builds
- update target inode's ctime on unlink, mandated by POSIX
- properly take lock to read/update block group's zoned variables
- add counted_by() annotations"
* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: only enable extent map shrinker for DEBUG builds
btrfs: zoned: properly take lock to read/update block group's zoned variables
btrfs: tree-checker: add dev extent item checks
btrfs: update target inode's ctime on unlink
btrfs: send: annotate struct name_cache_entry with __counted_by()
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f2582 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a test for the new functionality of userspace-driven timers and the
tool which allows us to count timer ticks in a certain time period. The
test:
1. Creates a userspace-driven timer with ioctl to /dev/snd/timer
2. Starts the `global-timer` application to count the ticks of the timer
from step 1.
3. Asynchronously triggers the timer multiple times with some interval
4. Compares the amount of caught ticks with the amount of trigger calls.
Since we can't include <alsa/asoundlib.h> and <sound/asound.h> in one
file due to overlapping declarations, I have to split the test into two
applications: one of them counts the amount of timer ticks in the
defined time period, and another one is the actual test which creates
the timer, triggers it periodically and starts the first app to count
the amount of ticks in a separate thread.
Besides from testing the functionality itself, the test represents a
sample application showing userspace-driven ALSA timers API.
Also, the timer test includes a test case which tries to create a timer
with invalid resolution (=0), and NULL as a timer info structure.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240813120701.171743-5-ivan.orlov0322@gmail.com
Implement two ioctl calls in order to support virtual userspace-driven
ALSA timers.
The first ioctl is SNDRV_TIMER_IOCTL_CREATE, which gets the
snd_timer_uinfo struct as a parameter and puts a file descriptor of a
virtual timer into the `fd` field of the snd_timer_unfo structure. It
also updates the `id` field of the snd_timer_uinfo struct, which
provides a unique identifier for the timer (basically, the subdevice
number which can be used when creating timer instances).
This patch also introduces a tiny id allocator for the userspace-driven
timers, which guarantees that we don't have more than 128 of them in the
system.
Another ioctl is SNDRV_TIMER_IOCTL_TRIGGER, which allows us to trigger
the virtual timer (and calls snd_timer_interrupt for the timer under
the hood), causing all of the timer instances binded to this timer to
execute their callbacks.
The maximum amount of ticks available for the timer is 1 for the sake of
simplicity of the userspace API. 'start', 'stop', 'open' and 'close'
callbacks for the userspace-driven timers are empty since we don't
really do any hardware initialization here.
Suggested-by: Axel Holzinger <aholzinger@gmx.de>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240813120701.171743-4-ivan.orlov0322@gmail.com
Add the documentation which describes the new userspace-driven timers
API introduced in this patch series. The documentation contains:
- Description of userspace-driven ALSA timers, what they are for
- Description of the timers API
- Example of how the timers can be created and triggered
- How the timers can be used as a timer sources for snd-aloop module
Suggested-by: Axel Holzinger <aholzinger@gmx.de>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240813120701.171743-3-ivan.orlov0322@gmail.com
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from spi_device_id table.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://patch.msgid.link/20240815091312.757139-1-liuyuntao12@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The existing code enables the Cadence IP interrupts after the bus
reset sequence. The problem with this sequence is that it might be
pre-empted, giving SoundWire devices time to sync and report as
ATTACHED before the interrupts are enabled. In that case, the Cadence
IP will not detect a state change and will not throw an interrupt to
proceed with the enumeration of a Device0.
In our overnight stress tests, we observed that a slight
sub-millisecond delay in enabling interrupts after the reset was
correlated with detection failures. This problem is more prevalent on
the LunarLake silicon, likely due to SOC integration changes, but it
was observed on earlier generations as well.
This patch reverts the sequence, with the interrupts enabled before
performing the bus reset. This removes the race condition and makes
sure the Cadence IP is able to detect the presence of a Device0 in all
cases.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240805115003.88035-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SoundWire peripheral enumeration is entirely based on interrupts,
more specifically sticky bits tracking state changes.
This patch adds a defensive programming check on the actual status
reported in PING frames. If for some reason an interrupt was lost or
delayed, the delayed work would detect a peripheral change of status
after the bus starts.
The 100ms defined for the delay is not completely arbitrary, if a
Peripheral didn't join the bus within that delay then probably the
hardware link is broken, and conversely if the detection didn't happen
because of software issues the 100ms is still acceptable in terms of
user experience.
The overhead of the one-shot workqueue is minimal, and the mutual
exclusion ensures that the interrupt and delayed work cannot update
the status concurrently.
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240805114921.88007-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
the others pertain to post-6.10 issues.
As usual with these merges, singletons and doubletons all over the place,
no identifiable-by-me theme. Please see the lovingly curated changelogs
to get the skinny.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZsFf8wAKCRDdBJ7gKXxA
jvEUAP97y/sqKD8rQNc0R8fRGSPNPamwyok8RHwohb0JEHovlAD9HsQ9Ad57EpqR
wBexMxJRFc7Dt73Tu6IkLQ1iNGqABAc=
=8KNp
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. All except one are for MM. 10 of these are cc:stable and
the others pertain to post-6.10 issues.
As usual with these merges, singletons and doubletons all over the
place, no identifiable-by-me theme. Please see the lovingly curated
changelogs to get the skinny"
* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/migrate: fix deadlock in migrate_pages_batch() on large folios
alloc_tag: mark pages reserved during CMA activation as not tagged
alloc_tag: introduce clear_page_tag_ref() helper function
crash: fix riscv64 crash memory reserve dead loop
selftests: memfd_secret: don't build memfd_secret test on unsupported arches
mm: fix endless reclaim on machines with unaccepted memory
selftests/mm: compaction_test: fix off by one in check_compaction()
mm/numa: no task_numa_fault() call if PMD is changed
mm/numa: no task_numa_fault() call if PTE is changed
mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
mm: don't account memmap per-node
mm: add system wide stats items category
mm: don't account memmap on failure
mm/hugetlb: fix hugetlb vs. core-mm PT locking
mseal: fix is_madv_discard()
- Fix crashes on 85xx with some configs since the recent hugepd rework.
- Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some platforms.
- Don't enable offline cores when changing SMT modes, to match existing
userspace behaviour.
Thanks to: Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal Jan
K.A, Shrikanth Hegde, Thomas Gleixner, Tyrel Datwyler.
-----BEGIN PGP SIGNATURE-----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=sZ+f
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes on 85xx with some configs since the recent hugepd rework.
- Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
platforms.
- Don't enable offline cores when changing SMT modes, to match existing
userspace behaviour.
Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.
* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/topology: Check if a core is online
cpu/SMT: Enable SMT only if a core is online
powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
powerpc/mm: Fix size of allocated PGDIR
soc: fsl: qbman: remove unused struct 'cgr_comp'
Those counters were used to keep track of the numbers VMs in fault mode
and in non-fault mode, to determine if the whole device was in fault mode
or not. This is no longer needed so remove those variables and their
usages.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-12-francois.dugast@intel.com
With this restriction, all VMs on the device must be faulting VMs if there
is already one faulting VM, in which case the device is considered in
fault mode. This prevents for example an application from running 3D jobs
for the compositor while submitting a SVM compute job on the same device.
Now that mutual exclusion of faulting LR jobs and dma fence jobs is
ensured on the hw engine group, remove this restriction to allow running
faulting and non-faulting VMs on the same device.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-11-francois.dugast@intel.com
If the job about to be submitted is a dma-fence job, update the current
execution mode of the hw engine group. This triggers an immediate suspend
of the exec queues running faulting long-running jobs.
If the job about to be submitted is a long-running job, kick a new worker
used to resume the exec queues running faulting long-running jobs once
the dma-fence jobs have completed.
v2: Kick the resume worker from exec IOCTL, switch to unordered workqueue,
destroy it after use (Matt Brost)
v3: Do not resume if no exec queue was suspended (Matt Brost)
v4: Squash commits (Matt Brost)
v5: Do not kick the worker when xe_vm_in_preempt_fence_mode (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-10-francois.dugast@intel.com
Provide a way to safely transition execution modes of the hw engine group
ahead of the actual execution. When necessary, either wait for running
jobs to complete or preempt them, thus ensuring mutual exclusion between
execution modes.
Unlike a mutex, the rw_semaphore used in this context allows multiple
submissions in the same mode.
v2: Use lockdep_assert_held_write, add annotations (Matt Brost)
v3: Fix kernel doc, remove redundant code (Matt Brost)
v4: Now that xe_hw_engine_group_suspend_faulting_lr_jobs can fail,
propagate the error to the caller (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-9-francois.dugast@intel.com
This is a required feature for faulting long running jobs not to be
submitted while dma fence jobs are running on the hw engine group.
v2: Switch to lockdep_assert_held_write in worker, get a proper reference
for the last fence (Matt Brost)
v3: Directly call dma_fence_put with the fence ref (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-8-francois.dugast@intel.com
Ensure we can safely take a ref of the exec queue's last fence from the
context of resuming jobs from the hw engine group. The locking requirements
differ from the general case, hence the introduction of this new function.
v2: Add kernel doc, rework the code to prevent code duplication
v3: Fix kernel doc, remove now unnecessary lockdep variants (Matt Brost)
v4: Remove new put function (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-7-francois.dugast@intel.com
This code section is the same as the body of
xe_exec_queue_last_fence_put_unlocked() so call the function instead and
remove duplicated code to make maintenance easier.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-6-francois.dugast@intel.com
This is a required feature for dma fence jobs to preempt faulting long
running jobs in order to ensure mutual exclusion on a given hw engine
group.
v2: Pipeline calls to suspend(q) and suspend_wait(q) to improve
efficiency, switch to lockdep_assert_held_write (Matt Brost)
v3: Return error on suspend_wait failure to propagate on the call stack
up to IOCTL (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-5-francois.dugast@intel.com
Add helpers to safely add and delete the exec queues attached to a hw
engine group, and make use them at the time of creation and destruction of
the exec queues. Keeping track of them is required to control the
execution mode of the hw engine group.
v2: Improve error handling and robustness, suspend exec queues created in
fault mode if group in dma-fence mode, init queue link (Matt Brost)
v3: Delete queue from hw engine group when it is destroyed by the user,
also clean up at the time of closing the file in case the user did
not destroy the queue
v4: Use correct list when checking if empty, do not add the queue if VM
is in xe_vm_in_preempt_fence_mode (Matt Brost)
v5: Remove unrelated newline, add checks and asserts for group, unwind on
suspend failure (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-4-francois.dugast@intel.com
Rely on wait_event_interruptible_timeout() to put the process to sleep
with TASK_INTERRUPTIBLE. It allows using this function in interruptible
context.
v2: Propagate error on wait_event_interruptible_timeout (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-3-francois.dugast@intel.com
A xe_hw_engine_group is a group of hw engines. Two hw engines belong to
the same xe_hw_engine_group if one hw engine cannot make progress while
the other is stuck on a page fault.
Typically, hw engines of the same group share some resources such as EUs,
but this really depends on the hardware configuration of the platforms.
The simple engines partitioning proposed here might be too conservative
but is intended to work for existing platforms. It can be optimized later
if more sets of independent engines are identified.
The hw engine groups are intended to be used in the context of faulting
long-running jobs submissions.
v2: Move to own files, improve error handling (Matt Brost)
v3: Fix build issue reported by CI, improve commit message (Matt Roper)
v4: Fix kernel doc
v5: Add switch case for XE_ENGINE_CLASS_OTHER
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-2-francois.dugast@intel.com
I2C core needs to fix a fix from rc3 by replacing IS_ENABLED() with
IS_REACHABLE().
For host drivers, there are two fixes in this update:
Tegra I2C Controller: Addresses a potential double-locking issue
during probe. ACPI devices are not IRQ-safe when invoking runtime
suspend and resume functions, so the irq_safe flag should not be
set.
Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
of the runtime_resume() function, which was missed in the
previous release.
-----BEGIN PGP SIGNATURE-----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=xSb+
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C core fix replacing IS_ENABLED() with IS_REACHABLE()
For host drivers, there are two fixes:
- Tegra I2C Controller: Addresses a potential double-locking issue
during probe. ACPI devices are not IRQ-safe when invoking runtime
suspend and resume functions, so the irq_safe flag should not be
set.
- Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
of the runtime_resume() function, which was missed in the previous
release"
* tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Do not mark ACPI devices as irq safe
i2c: Use IS_REACHABLE() for substituting empty ACPI functions
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
User binds map to engines with can fault, faults depend on user binds
completion, thus we can deadlock. Avoid this by using reserved copy
engine for user binds on faulting devices.
While we are here, normalize bind queue creation with a helper.
v2:
- Pass in extensions to bind queue creation (CI)
v3:
- s/resevered/reserved (Lucas)
- Fix NULL hwe check (Jonathan)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816034033.53837-1-matthew.brost@intel.com
Two bitmasks in 'struct sdw_slave_prop' - 'source_ports' and
'sink_ports' - define which ports to program in
sdw_program_slave_port_params(). The masks are used to get the
appropriate data port properties ('struct sdw_get_slave_dpn_prop') from
an array.
Bitmasks can be non-continuous or can start from index different than 0,
thus when looking for matching port property for given port, we must
iterate over mask bits, not from 0 up to number of ports.
This fixes allocation and programming slave ports, when a source or sink
masks start from further index.
Fixes: f8101c74aa ("soundwire: Add Master and Slave port programming")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240729140157.326450-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Two small fixes to the mpi3mr driver. One to avoid oversize
allocations in tracing and the other to fix an uninitialized spinlock
in the user to driver feature request code (used to trigger dumps and
the like).
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZsBQwyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisheu1AQCI/XZH
BpmXjjiQXGXTS7f2M6qzL0u3atQe3mN4+KIIbgEA+7WlNAiPa6rw2wjcXhOfQNs8
BHhU85KzlrzVuQY/b18=
=YODS
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes to the mpi3mr driver. One to avoid oversize
allocations in tracing and the other to fix an uninitialized spinlock
in the user to driver feature request code (used to trigger dumps and
the like)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpi3mr: Avoid MAX_PAGE_ORDER WARNING for buffer allocations
scsi: mpi3mr: Add missing spin_lock_init() for mrioc->trigger_lock
* Check for presence of only 'attr' feature before scrubbing an inode's
attribute fork.
* Restore the behaviour of setting AIL thread to TASK_INTERRUPTIBLE for
long (i.e. 50ms) sleep durations to prevent high load averages.
* Do not allow users to change the realtime flag of a file unless the
datadev and rtdev both support fsdax access modes.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZr1wqwAKCRAH7y4RirJu
9MYxAQCgHoAK8rqxb4obrrGmqVcHJdnHDYqSFRqbbvytRHybZgEA2hfaNbNpuQYT
JOV5pGOUJf1LiSc5D6MBepg2BAFRNwo=
=7Ibh
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Check for presence of only 'attr' feature before scrubbing an inode's
attribute fork.
- Restore the behaviour of setting AIL thread to TASK_INTERRUPTIBLE for
long (i.e. 50ms) sleep durations to prevent high load averages.
- Do not allow users to change the realtime flag of a file unless the
datadev and rtdev both support fsdax access modes.
* tag 'xfs-6.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: conditionally allow FS_XFLAG_REALTIME changes if S_DAX is set
xfs: revert AIL TASK_KILLABLE threshold
xfs: attr forks require attr, not attr2
- New on disk format version, bcachefs_metadata_version_disk_accounting_inum
This adds one more disk accounting counter, which counts disk usage and
number of extents per inode number. This lets us track fragmentation,
for implementing defragmentation later, and it also counts disk usage
per inode in all snapshots, which will be a useful thing to expose to
users.
- One performance issue we've observed is threads spinning when they
should be waiting for dirty keys in the key cache to be flushed by
journal reclaim, so we now have hysteresis for the waiting thread, as
well as improving the tracepoint and a new time_stat, for tracking time
blocked waiting on key cache flushing.
And, various assorted smaller fixes.
-----BEGIN PGP SIGNATURE-----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=BPGT
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-08-16' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent OverstreetL
- New on disk format version, bcachefs_metadata_version_disk_accounting_inum
This adds one more disk accounting counter, which counts disk usage
and number of extents per inode number. This lets us track
fragmentation, for implementing defragmentation later, and it also
counts disk usage per inode in all snapshots, which will be a useful
thing to expose to users.
- One performance issue we've observed is threads spinning when they
should be waiting for dirty keys in the key cache to be flushed by
journal reclaim, so we now have hysteresis for the waiting thread, as
well as improving the tracepoint and a new time_stat, for tracking
time blocked waiting on key cache flushing.
... and various assorted smaller fixes.
* tag 'bcachefs-2024-08-16' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix locking in __bch2_trans_mark_dev_sb()
bcachefs: fix incorrect i_state usage
bcachefs: avoid overflowing LRU_TIME_BITS for cached data lru
bcachefs: Fix forgetting to pass trans to fsck_err()
bcachefs: Increase size of cuckoo hash table on too many rehashes
bcachefs: bcachefs_metadata_version_disk_accounting_inum
bcachefs: Kill __bch2_accounting_mem_mod()
bcachefs: Make bkey_fsck_err() a wrapper around fsck_err()
bcachefs: Fix warning in __bch2_fsck_err() for trans not passed in
bcachefs: Add a time_stat for blocked on key cache flush
bcachefs: Improve trans_blocked_journal_reclaim tracepoint
bcachefs: Add hysteresis to waiting on btree key cache flush
lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
bcachefs: Convert for_each_btree_node() to lockrestart_do()
bcachefs: Add missing downgrade table entry
bcachefs: disk accounting: ignore unknown types
bcachefs: bch2_accounting_invalid() fixup
bcachefs: Fix bch2_trigger_alloc when upgrading from old versions
bcachefs: delete faulty fastpath in bch2_btree_path_traverse_cached()
There are a number of calibbias and calibbias_available attributes that
are being used by various drivers that have not been documented yet.
This adds attributes found by searching the code for:
BIT(IIO_CHAN_INFO_CALIBSCALE)
A couple of not quite alphabetical order attributes were moved while
touching this.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240815-iio-abi-calib-audit-v1-4-536b2fea8620@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds additional calibscale attributes to the ABI documentation for
instances found in drivers by searching the code for:
BIT(IIO_CHAN_INFO_CALIBSCALE)
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240815-iio-abi-calib-audit-v1-3-536b2fea8620@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are a number of light sensor drivers that have various
calibscale_available attributes. Up to now, these were missing from
the documentation.
Kernel version 4.8 is used since the first use appears to be in
commit eb869ade30 ("iio: Add tcs3472 color light sensor driver").
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240815-iio-abi-calib-audit-v1-1-536b2fea8620@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
counts_per_uvi depends on the current value of gain and resolution.
Hence, we cannot use the hardcoded value 96.
The `counts_per_uvi` function gives the count based on the current gain
and resolution (integration time).
Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com>
Link: https://patch.msgid.link/20240814113135.14575-3-abhashkumarjha123@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add new ALS channel and allow reading lux and scale values.
Also provide gain and resolution configuration for ALS channel.
Add automatic mode switching between the UVS and ALS channel
based on which channel is being accessed.
The default mode in which the sensor start is ALS mode.
Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com>
Link: https://patch.msgid.link/20240814113135.14575-2-abhashkumarjha123@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Update the ad4695 documentation to say that buffered reads are
supported. Since there are 4 possible modes of reading conversion data,
it is useful to know which one is actually being used, namely the
advanced sequencer mode.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240813-iio-adc-ad4695-buffered-read-v2-2-9bb19fc1924b@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This implements buffered reads for the ad4695 driver using the typical
triggered buffer implementation, including adding a soft timestamp
channel.
The chip has 4 different modes for doing conversions. The driver is
using the advanced sequencer mode since that is the only mode that
allows individual configuration of all aspects each channel (e.g.
bipolar config currently and oversampling to be added in the future).
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240813-iio-adc-ad4695-buffered-read-v2-1-9bb19fc1924b@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If we're returning because "reg >= HX9023S_CH_NUM" then set the error code
to -ENIVAL instead of success.
Fixes: 60df548277 ("iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/49b5a9bc-e5ca-43a7-a665-313eb06fbe27@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current code is always iterating over two fields in the
noa1305_int_time_available array. Fix iteration limit, which
has to be halved to avoid out of bounds access in case the
value that is being looked up is not in the array.
Fixes: 025f23cfeb ("iio: light: noa1305: Make integration time configurable")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20240814191946.81386-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for ENS210/ENS210A/ENS211/ENS212/ENS213A/ENS215.
The ENS21x is a family of temperature and relative humidity sensors with
accuracies tailored to the needs of specific applications.
Signed-off-by: Joshua Felmeden <jfelmeden@thegoodpenguin.co.uk>
Link: https://patch.msgid.link/20240805-ens21x-v6-2-5bb576ef26a6@thegoodpenguin.co.uk
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add device tree documentation for ENS210 family of temperature and
humidity sensors
Signed-off-by: Joshua Felmeden <jfelmeden@thegoodpenguin.co.uk>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240805-ens21x-v6-1-5bb576ef26a6@thegoodpenguin.co.uk
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Interrupt status read seems to be broken on some old MPU-6050 like
chips. Fix by reverting to previous driver behavior bypassing interrupt
status read. This is working because these chips are not supporting
WoM and data ready is the only interrupt source.
Fixes: 5537f653d9 ("iio: imu: inv_mpu6050: add new interrupt handler for WoM events")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # LG P880
Link: https://patch.msgid.link/20240814143735.327302-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Models AD4114/5/6 have .higher_gpio_bits = true. This is not correct as
the only models that have the GPIO bits to a higher position are AD4111/2.
Fix by removing the higher_gpio_bits = true from the AD4114/5/6 models.
Fixes: 13d12e3ad1 ("iio: adc: ad7173: Add support for AD411x devices")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://patch.msgid.link/20240809134909.26829-1-dumitru.ceclan@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When intel_gt_release_all() was removed from the code in commit
e899505533 ("drm/i915: do not clean GT table on error path"), its
declaration in the header file remained. Remove it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813140618.387553-1-luciano.coelho@intel.com
A commit 404957c1e207 ("firewire: ohci: use guard macro to serialize
accesses to phy registers") refactored initiated_reset() helper function,
while the error path was changed wrongly.
This commit fixes the bug.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 80f3401dfeb2 ("firewire: ohci: use guard macro to serialize accesses to phy registers")
Link: https://lore.kernel.org/r/20240817091128.180303-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In the absence of an explicit cgroup slice configureation, make mixed
slice length work with cgroups by propagating the min_slice up the
hierarchy.
This ensures the cgroup entity gets timely service to service its
entities that have this timing constraint set on them.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105030.948188417@infradead.org
