Add the PCIe module clock, which is used by the PCIe module on the
Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240704061720.1444755-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Matthieu Baerts says:
====================
mptcp: fix inconsistent backup usage
In all the MPTCP backup related tests, the backup flag was set on one
side, and the expected behaviour is to have both sides respecting this
decision. That's also the "natural" way, and what the users seem to
expect.
On the scheduler side, only the 'backup' field was checked, which is
supposed to be set only if the other peer flagged a subflow as backup.
But in various places, this flag was also set when the local host
flagged the subflow as backup, certainly to have the expected behaviour
mentioned above.
Patch 1 modifies the packet scheduler to check if the backup flag has
been set on both directions, not to change its behaviour after having
applied the following patches. That's what the default packet scheduler
should have done since the beginning in v5.7.
Patch 2 fixes the backup flag being mirrored on the MPJ+SYN+ACK by
accident since its introduction in v5.7. Instead, the received and sent
backup flags are properly distinguished in requests.
Patch 3 stops setting the received backup flag as well when sending an
MP_PRIO, something that was done since the MP_PRIO support in v5.12.
Patch 4 adds related and missing MIB counters to be able to easily check
if MP_JOIN are sent with a backup flag. Certainly because these counters
were not there, the behaviour that is fixed by patches here was not
properly verified.
Patch 5 validates the previous patch by extending the MPTCP Join
selftest.
Patch 6 fixes the backup support in signal endpoints: if a signal
endpoint had the backup flag, it was not set in the MPJ+SYN+ACK as
expected. It was only set for ongoing connections, but not future ones
as expected, since the introduction of the backup flag in endpoints in
v5.10.
Patch 7 validates the previous patch by extending the MPTCP Join
selftest as well.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
---
Matthieu Baerts (NGI0) (7):
mptcp: sched: check both directions for backup
mptcp: distinguish rcv vs sent backup flag in requests
mptcp: pm: only set request_bkup flag when sending MP_PRIO
mptcp: mib: count MPJ with backup flag
selftests: mptcp: join: validate backup in MPJ
mptcp: pm: fix backup support in signal endpoints
selftests: mptcp: join: check backup support in signal endp
include/trace/events/mptcp.h | 2 +-
net/mptcp/mib.c | 2 +
net/mptcp/mib.h | 2 +
net/mptcp/options.c | 2 +-
net/mptcp/pm.c | 12 +++++
net/mptcp/pm_netlink.c | 19 ++++++-
net/mptcp/pm_userspace.c | 18 +++++++
net/mptcp/protocol.c | 10 ++--
net/mptcp/protocol.h | 4 ++
net/mptcp/subflow.c | 10 ++++
tools/testing/selftests/net/mptcp/mptcp_join.sh | 72 ++++++++++++++++++++-----
11 files changed, 132 insertions(+), 21 deletions(-)
====================
Link: https://patch.msgid.link/20240727-upstream-net-20240727-mptcp-backup-signal-v1-0-f50b31604cf1@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before the previous commit, 'signal' endpoints with the 'backup' flag
were ignored when sending the MP_JOIN.
The MPTCP Join selftest has then been modified to validate this case:
the "single address, backup" test, is now validating the MP_JOIN with a
backup flag as it is what we expect it to do with such name. The
previous version has been kept, but renamed to "single address, switch
to backup" to avoid confusions.
The "single address with port, backup" test is also now validating the
MPJ with a backup flag, which makes more sense than checking the switch
to backup with an MP_PRIO.
The "mpc backup both sides" test is now validating that the backup flag
is also set in MP_JOIN from and to the addresses used in the initial
subflow, using the special ID 0.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There was a support for signal endpoints, but only when the endpoint's
flag was changed during a connection. If an endpoint with the signal and
backup was already present, the MP_JOIN reply was not containing the
backup flag as expected.
That's confusing to have this inconsistent behaviour. On the other hand,
the infrastructure to set the backup flag in the SYN + ACK + MP_JOIN was
already there, it was just never set before. Now when requesting the
local ID from the path-manager, the backup status is also requested.
Note that when the userspace PM is used, the backup flag can be set if
the local address was already used before with a backup flag, e.g. if
the address was announced with the 'backup' flag, or a subflow was
created with the 'backup' flag.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/507
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A peer can notify the other one that a subflow has to be treated as
"backup" by two different ways: either by sending a dedicated MP_PRIO
notification, or by setting the backup flag in the MP_JOIN handshake.
The selftests were previously monitoring the former, but not the latter.
This is what is now done here by looking at these new MIB counters when
validating the 'backup' cases:
MPTcpExtMPJoinSynBackupRx
MPTcpExtMPJoinSynAckBackupRx
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it will help to validate a new fix for an issue introduced by this
commit ID.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Without such counters, it is difficult to easily debug issues with MPJ
not having the backup flags on production servers.
This is not strictly a fix, but it eases to validate the following
patches without requiring to take packet traces, to query ongoing
connections with Netlink with admin permissions, or to guess by looking
at the behaviour of the packet scheduler. Also, the modification is self
contained, isolated, well controlled, and the increments are done just
after others, there from the beginning. It looks then safe, and helpful
to backport this.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'backup' flag from mptcp_subflow_context structure is supposed to be
set only when the other peer flagged a subflow as backup, not the
opposite.
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When sending an MP_JOIN + SYN + ACK, it is possible to mark the subflow
as 'backup' by setting the flag with the same name. Before this patch,
the backup was set if the other peer set it in its MP_JOIN + SYN
request.
It is not correct: the backup flag should be set in the MPJ+SYN+ACK only
if the host asks for it, and not mirroring what was done by the other
peer. It is then required to have a dedicated bit for each direction,
similar to what is done in the subflow context.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'mptcp_subflow_context' structure has two items related to the
backup flags:
- 'backup': the subflow has been marked as backup by the other peer
- 'request_bkup': the backup flag has been set by the host
Before this patch, the scheduler was only looking at the 'backup' flag.
That can make sense in some cases, but it looks like that's not what we
wanted for the general use, because either the path-manager was setting
both of them when sending an MP_PRIO, or the receiver was duplicating
the 'backup' flag in the subflow request.
Note that the use of these two flags in the path-manager are going to be
fixed in the next commits, but this change here is needed not to modify
the behaviour.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add device nodes for the PWM timers on the Renesas R-Car V4M (R8A779H0)
SoC.
Signed-off-by: Khanh Le <khanh.le.xr@renesas.com>
[wsa: rebased, dropped TPU part to be upstreamed seperately]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240725194906.14644-11-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the MDS CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-2-leitao@debian.org
Power up the ASTDP connector for connection status detection if the
connector is not active. Keep it powered if a display is attached.
This fixes a bug where the connector does not come back after
disconnecting the display. The encoder's atomic_disable turns off
power on the physical connector. Further HPD reads will fail,
thus preventing the driver from detecting re-connected displays.
For connectors that are actively used, only test the HPD flag without
touching power.
Fixes: f81bb0ac78 ("drm/ast: report connection status on Display Port.")
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.6+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-2-tzimmermann@suse.de
sev_config currently has debug, ghcbs_initialized, and use_cas fields.
However, __reserved count has not been updated. Fix this.
Fixes: 34ff659017 ("x86/sev: Use kernel provided SVSM Calling Areas")
Signed-off-by: Pavan Kumar Paluri <papaluri@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240729180808.366587-1-papaluri@amd.com
Initialize equiv_id in order to shut up:
arch/x86/kernel/cpu/microcode/amd.c:714:6: warning: variable 'equiv_id' is \
used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (x86_family(bsp_cpuid_1_eax) < 0x17) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
because clang doesn't do interprocedural analysis for warnings to see
that this variable won't be used uninitialized.
Fixes: 94838d230a ("x86/microcode/AMD: Use the family,model,stepping encoded in the patch ID")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407291815.gJBST0P3-lkp@intel.com/
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Rename the Rockchip RK3399 SoC dtsi files and, consequently, adjust their
contents and the contents of the affected board dts(i) files appropriately,
to "encapsulate" the different CPU and GPU OPPs for each of the supported
RK3399 SoC variants into the respective SoC variant dtsi files.
Moving the OPPs to the SoC variant dtsi files, instead of requiring the
board dts(i) files to include both the SoC variant dtsi file and the right
OPP variant dtsi file, reduces the possibility for mismatched inclusion and
improves the overall hierarchical representation of data.
These changes follow the approach used for the Rockchip RK3588 SoC variants,
which was introduced and described further in commit def88eb4d8 ("arm64:
dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs"). Please
see that commit for a more detailed explanation.
No functional changes are introduced, which was validated by decompiling and
comparing all affected dtb files before and after these changes. In more
detail, all decompiled dtb files remain exactly the same, except the files
list below, which results from all of them stemming from the same base board
dtsi file (rk3399-rock-pi-4.dtsi), while all of them include one of the three
different RK3399 SoC variant dtsi files by themselves:
- rk3399-rock-4se.dtb
- rk3399-rock-pi-4a.dtb
- rk3399-rock-pi-4a-plus.dtb
- rk3399-rock-pi-4b.dtb
- rk3399-rock-pi-4b-plus.dtb
- rk3399-rock-pi-4c.dtb
When compared with the decompiled original dtb files, these dtb files have
some of their blocks shuffled around a bit and some of their phandles have
different values, as a result of the changes to the order in which the
building blocks from the parent dtsi files are included into them, but they
still effectively remain the same as the originals.
The only exception to the "include only a SoC variant dtsi" is found in
rk3399-evb.dts, which includes rk3399-base.dtsi instead of rk3399.dtsi.
This is intentional, because this board dts file doesn't enable the TSADC,
so including rk3399.dtsi would enable the SoC to go into higher OPPs with
no thermal throttling in place. Let's hope that people interested in this
board will fix this in the future.
As a side note, due to the nature of introduced changes, this commit is best
viewed using the --break-rewrites option for git-log(1).
Related-to: def88eb4d8 ("arm64: dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/9417b5c5b64f9aceea64530a85a536169a3e7466.1721532747.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
It fixes the following checkpatch.pl error
"ERROR: that open brace { should be on the previous line" and avoids the
warning "WARNING: braces {} are not necessary for single statement blocks".
Signed-off-by: Sai Sree Kartheek Adivi <sskartheekadivi@gmail.com>
Link: https://lore.kernel.org/r/20240730065901.35254-1-sskartheekadivi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch diagnostic "ERROR: that open brace { should be on the
previous line" in rtw_security.h:173
Signed-off-by: Guilherme Puida Moreira <guilherme@puida.xyz>
Link: https://lore.kernel.org/r/20240730064812.1979-1-guilherme@puida.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes the following checkpatch.pl warnings:
WARNING: function definition argument 'int' should also have an identifier name
+ void (*call)(int, int, void *);
WARNING: function definition argument 'int' should also have an identifier name
+ void (*call)(int, int, void *);
WARNING: function definition argument 'void *' should also have an identifier name
+ void (*call)(int, int, void *);
Signed-off-by: Agathe Porte <gagath@debian.org>
Link: https://lore.kernel.org/r/20240730062843.64977-1-gagath@debian.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adhere to Linux Kernal coding style.
Reported by checkpatch
CHECK: Alignment should match open parenthesis
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Link: https://lore.kernel.org/r/20240729130213.48941-2-griffin@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adhere to Linux kernel coding style.
Reported by checkpatch:
CHECK: Alignment should match open parenthesis
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Link: https://lore.kernel.org/r/20240729130213.48941-1-griffin@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch makes three error messages in the driver easier to read by
capitalizing the first letters properly.
For example, "channel already linked" becomes "Channel already linked", and
"expect" becomes "expected", as you would typically
find in an error message.
This patch improves user experience by making the errors clearer.
Signed-off-by: Steven Davis <goldside000@outlook.com>
Link: https://lore.kernel.org/r/SJ2P223MB1026E786B28986901BC1C126F7A92@SJ2P223MB1026.NAMP223.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the two supplies for the pmu-io-domains that are defined in the
vendor devicetree for the TS433.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-15-heiko@sntech.de
The TS433 doesn't provide display output, but the gpu nevertheless can be
used for compute tasks for example.
So there is no reason not to enable it.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-14-heiko@sntech.de
Fill in the missing pieces for RK809 pmic used on the TS433.
The regulator setup comes from the vendor-devicetree, so without proper
schematics its accuracy is somewhat unclear, but it looks really similar
to all the other rk3568 boards, so follows the reference design it seems.
The one caveat is related to vcc3v3_sd. This regulator needs to stay on.
When turned off because of no users, access to both PCIe controllers
will stall. Maybe this rail does supply the 100MHz refclk generation
or so.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-13-heiko@sntech.de
The TS433 seems to use a silergy,syr827 regulator for the cpu supply.
At least that is the compatible used in the vendor devicetree, though
it could very well also be another fan53555 clone.
Define the needed regulator node and hook up the cpu-supply to the
cpu cores.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-12-heiko@sntech.de
The TS433 has 3 buttons, power and copy in the front as well as a reset
pinhole button on the back. The power-button is connected to the embedded
controller while the other two buttons are just gpio connected.
Add the gpio-keys definition for the two buttons we can handle right now.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-11-heiko@sntech.de
Add the 4 gpio-controlled LEDs to the Qnap-TS433.
They are meant for individual disk activitivy, but I haven't found a
way for how to connect them to their individual sata slot yet.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-9-heiko@sntech.de
Add the aliases for the internal network interface as well as the emmc
on the board and make sure the dedicated RTC is always the first one.
The TS433 actually has two rtc devices. One coming from the rk809 pmic
without added functionality and also a dedicated RTC from Mycrocrystal
that is battery backed to keep the time.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-8-heiko@sntech.de
The TS433 has 4 bays. The last two are accessed via a pci-connected
sata controller, while the first two are accessed via the rk3568's
sata controllers. Enable these two now.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-7-heiko@sntech.de
As most Rockchip boards do, the TS433 also uses uart2 for its serial
output. Set the correct chosen entry for it.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-6-heiko@sntech.de
Enable usb controllers and phys and add regulator infrastructure for the
usb ports on the TS433.
Of course there are no schematics available for the device, so the
regulator information comes from the vendor-devicetree with unknown
accuracy.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-5-heiko@sntech.de
Uart0 is connected to an MCU on the board that handles system control
like the fan-speed. So far no driver for it is available though.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-4-heiko@sntech.de
The TS433 uses both pcie controllers for sata and the 2nd network
interface. Set the needed data-lanes in the pcie3 phy and enable
the second pcie controller, as well as remove the bifurcation comment.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-3-heiko@sntech.de
The original patch added two columns in the flat-table of Luma-Only
Image Formats, without updating hints to latex: above it. This results
in wrong column count in the output of Sphinx's latex builder.
Fix it.
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Closes: https://lore.kernel.org/linux-media/bdbc27ba-5098-49fb-aabf-753c81361cc7@gmail.com/
Fixes: adb1d4655e ("media: v4l: Add V4L2-PIX-FMT-Y14P format")
Cc: stable@vger.kernel.org # for v6.10
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Intel IPU6 PCI driver need register its devices on auxiliary
bus, so it needs to select the AUXILIARY_BUS in Kconfig.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407161833.7BEFXejx-lkp@intel.com/
Fixes: c70281cc83 ("media: intel/ipu6: add Kconfig and Makefile")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Cc: stable@vger.kernel.org # for v6.10
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Commit 4670c8c3fb ("media: ipu-bridge: Fix Kconfig dependencies") changed
how IPU_BRIDGE dependencies are handled for all drivers, but the IPU6
variant was added the old way, which causes build time warnings when I2C is
turned off:
WARNING: unmet direct dependencies detected for IPU_BRIDGE
Depends on [n]: MEDIA_SUPPORT [=m] && PCI [=y] && MEDIA_PCI_SUPPORT [=y] && (ACPI [=y] || COMPILE_TEST [=y]) && I2C [=n]
Selected by [m]:
- VIDEO_INTEL_IPU6 [=m] && MEDIA_SUPPORT [=m] && PCI [=y] && MEDIA_PCI_SUPPORT [=y] && (ACPI [=y] || COMPILE_TEST [=y]) && VIDEO_DEV [=m] && X86 [=y] && X86_64 [=y] && HAS_DMA [=y]
To make it consistent with the other IPU drivers as well as avoid this
warning, change the 'select' into 'depends on'.
Fixes: c70281cc83 ("media: intel/ipu6: add Kconfig and Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Sakari Ailus: Alternatively depend on !IPU_BRIDGE.]
Cc: stable@vger.kernel.org # for v6.10
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The code path for kcontrol accesses have often nested locks of both
card's controls_rwsem and power_ref, and applies in that order.
However, what could take much longer is the latter, power_ref; it
waits for the power state of the device, and it pretty much depends on
the user's action.
This patch swaps the locking order of those locks to a more natural
way, namely, power_ref -> controls_rwsem, in order to shorten the time
of possible nested locks. For consistency, power_ref is taken always
in the top-level caller side (that is, *_user() functions and the
ioctl handler itself).
Link: https://patch.msgid.link/20240729160659.4516-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
