Drop parentheses where not needed and add them where it makes sense in
register constant definitions.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-6-kabel@kernel.org
Change spaces to tabs in register constants definitions.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-4-kabel@kernel.org
There is one occurrence of suffix _MSK in register constants, others
have _MASK instead. Change the one to _MASK for consistency.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-3-kabel@kernel.org
Some register constants have the _OFFS suffix and some do not. Drop it
to be more consistent.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-2-kabel@kernel.org
The place for link training is in the encoder's atomic_enable
helper. Remove all related tests from other helper ASTDP functions;
especially ast_astdp_is_connected(), which tests HPD status.
DP link training is controlled by the firmware. A status flag reports
success or failure. The process can be fragile on Aspeed hardware. Moving
the test from connector detection to the atomic_enable allows for several
retries and a longer timeout.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-5-tzimmermann@suse.de
The overall control flow of the driver ensures that it never reads
EDID or sets display state on unconnected outputs. Therefore remove
all tests for Hot Plug Detection from these helpers. Also rename
the register constants.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-4-tzimmermann@suse.de
Test for running ASTDP firmware during probe. Do not bother testing
this later. We cannot do much anyway if the firmware fails. Do not
initialize the ASTDP conenctor if the test fails during device probing.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Shixiong Ou <oushixiong@kylinos.cn>
Tested-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-3-tzimmermann@suse.de
In 782f8906f8 the freeing of kfence objects was moved from deep
inside do_slab_free to the wrapper functions outside. This is a nice
change, but unfortunately it missed one spot in __kmem_cache_free_bulk.
This results in a crash like this:
BUG skbuff_head_cache (Tainted: G S B E ): Padding overwritten. 0xffff88907fea0f00-0xffff88907fea0fff @offset=3840
slab_err (mm/slub.c:1129)
free_to_partial_list (mm/slub.c:? mm/slub.c:4036)
slab_pad_check (mm/slub.c:864 mm/slub.c:1290)
check_slab (mm/slub.c:?)
free_to_partial_list (mm/slub.c:3171 mm/slub.c:4036)
kmem_cache_alloc_bulk (mm/slub.c:? mm/slub.c:4495 mm/slub.c:4586 mm/slub.c:4635)
napi_build_skb (net/core/skbuff.c:348 net/core/skbuff.c:527 net/core/skbuff.c:549)
All the other callers to do_slab_free appear to be ok.
Add a kfence_free check in __kmem_cache_free_bulk to avoid the crash.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 782f8906f8 ("mm/slub: free KFENCE objects in slab_free_hook()")
Cc: stable@kernel.org
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Currently the Jacuzzi dtsi file redeclares the full DSI endpoint tree
from the DSI controller just to replace the remote endpoint. This is
not necessary since the local endpoint already has a label that can be
referenced. This will also confusion when the inherited layout is
changed.
Replace the redeclared DSI endpoint tree with a label reference.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240625095705.3474713-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
AS SDP should be computed when VRR timing generator is also enabled.
Correct the compute condition to compute params of Adaptive sync SDP
when VRR timing genrator is enabled along with sink support indication.
--v2:
Modify if condition (Jani).
Fixes: b2013783c4 ("drm/i915/display: Cache adpative sync caps to use it later")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
(added prefix drm in subject)
Link: https://patchwork.freedesktop.org/patch/msgid/20240730040941.396862-1-mitulkumar.ajitkumar.golani@intel.com
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the L1TF CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-5-leitao@debian.org
Commit 970c3a6b7a ("mfd: cros_ec: Register keyboard backlight
subdevice") introduced support for detecting keyboard backlight
fuctionality through communication with the ChromeOS EC. This means that
the DT node is no longer used. Remove the unneeded node.
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240722-cros-backlight-dt-probe-v2-1-d77cdf7018ec@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
GPIOs 34 and 35 on MT8195 are of type MTK_PULL_PU_PD_RSEL_TYPE, meaning
not only can they be configured as pull-up or pull-down, but the pull
resistance can also be configured.
The current bias setting however doesn't specify a resistance value,
resulting on the following errors:
mt8195-pinctrl 10005000.pinctrl: Not support rsel value 1 Ohm for pin = 34 (GPIO34)
mt8195-pinctrl 10005000.pinctrl: Not support rsel value 1 Ohm for pin = 35 (GPIO35)
Specify the pull resistance for those GPIOs to fix the errors.
Fixes: 5bf7dabe40 ("arm64: dts: mediatek: cherry: Document gpios and add default pin config")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240531-tomato-rsel-gpio34-35-fix-v1-1-64ab2545f182@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add support for the ADC on MT6357/8/9 and keep it default enabled
as this IP is always present on those PMICs.
Users may use different IIO channels depending on board-specific
routing.
Link: https://lore.kernel.org/r/20240604123008.327424-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The speedbin eFuse reads a value 'x' from 0 to 7 and, in order to
make that compatible with opp-supported-hw, it gets post processed
as BIT(x).
Change all of the 0x30 supported-hw to 0x20 to avoid getting
duplicate OPPs for speedbin 4, and also change all of the 0x8 to
0xcf because speedbins different from 4 and 5 do support 900MHz,
950MHz, 1000MHz with the higher voltage of 850mV, 900mV, 950mV
respectively.
Fixes: f38ea593ad ("arm64: dts: mediatek: mt8186: Wire up GPU voltage/frequency scaling")
Link: https://lore.kernel.org/r/20240725072243.173104-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
All of mutex_mod and mutex_table_mod contain an array of bit
numbers, which can go from 0 to 63, it is hence not needed to
use an unsigned 32-bits integer to store that: change them to
unsigned 8-bits instead.
As for the mutex_sof table since this directly contains the values
to write to the DISP_MUTEXn_CTL register, which has only bits [13:0]
(so this register is effectively 14 bits long), change that to use
unsigned 16-bits.
The type of mutex_{mod,sof}_reg was also changed to 16 bits, as
the maximum value that those will ever have is 0x800, because it
calculates as 0x30 + (0x20 * n) where n's maximum value is 63.
This reduces module size and brings no functional changes.
Before:
text data bss dec hex filename
9929 512 0 10441 28c9 mtk-mutex.o
After:
text data bss dec hex filename
7425 512 0 7937 1f01 mtk-mutex.o
Link: https://lore.kernel.org/r/20240729122538.989855-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Use devm_clk_bulk_get_all_enable() to simplify the code and to make sure
that clk_disable_unprepare() is called if the driver is unloaded.
Fixes: 55924157da ("soc: mediatek: pwrap: add support for sys & tmr clocks")
Fixes: 1f022d84bd ("soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5b1114c538dd5230728592855f89942aec8ef83b.1720331018.git.christophe.jaillet@wanadoo.fr
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
These arrays are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
45528 8532 16 54076 d33c drivers/soc/mediatek/mtk-pmic-wrap.o
After:
=====
text data bss dec hex filename
52664 1384 16 54064 d330 drivers/soc/mediatek/mtk-pmic-wrap.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/f1fea00fbaa0fea298bf67732e019f9cc5c407ab.1720331018.git.christophe.jaillet@wanadoo.fr
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
'struct pmic_wrapper_type' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
45336 8724 16 54076 d33c drivers/soc/mediatek/mtk-pmic-wrap.o
After:
=====
text data bss dec hex filename
45528 8532 16 54076 d33c drivers/soc/mediatek/mtk-pmic-wrap.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/5b4b60c5dfd6d8fe893b05cfc96c0e2d67705463.1720331018.git.christophe.jaillet@wanadoo.fr
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the MMIO Stale data CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-4-leitao@debian.org
The default PLL2/3/4/6 multiplier and divider configurations are no
longer used after the conversion to fixed or variable fractional PLL
clock types.
Note that the default configurations are still documented in the
comments above the individual rcar_gen4_cpg_pll_config instances.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/d13526a86066992d6afdf9bee7c1a18da72f914f.1721648548.git.geert+renesas@glider.be
Currently, all PLLs are modelled as fixed divider clocks, based on the
state of the mode pins. However, the boot loader stack may have changed
the actual PLL configuration from the default, leading to incorrect
clock frequencies.
Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, PLL4,
and PLL6 as variable fractional PLLs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/3beac7c44534ed153ce7cea5c31f4b0bb7b16ab0.1721648548.git.geert+renesas@glider.be
Currently, all PLLs but PLL2 are modelled as fixed divider clocks, based
on the state of the mode pins. However, the boot loader stack may have
changed the actual PLL configuration from the default, leading to
incorrect clock frequencies.
Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, PLL4,
and PLL6 as variable fractional PLLs.
Reformat nearby lines to retain a consistent layout.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/b98523ed08de7386944c5ae860eae107dc28be3e.1721648548.git.geert+renesas@glider.be
Currently, all PLLs are modelled as fixed divider clocks, based on the
state of the mode pins. However, the boot loader stack may have changed
the actual PLL configuration from the default, leading to incorrect
clock frequencies.
Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, and
PLL6 as variable fractional PLLs. Note that the R-Car Gen4 clock driver
does not support variable 9.24 PLLs yet, so the driver will downgrade
them to fixed fractional PLLs, too.
Reformat nearby lines to retain a consistent layout.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/8544571f507e00ed6fc61617d27c9e19de5e9d11.1721648548.git.geert+renesas@glider.be
The custom clock driver that models the PLL clocks on R-Car Gen4
supports only fractional 8.25 PLLs, as used on R-Car V4H/V4M.
R-Car S4-8 uses integer and fractional multiplication fields that are
one bit larger resp. smaller, and a slightly different formula.
Extend the existing support to fractional 9.24 PLL, and introduce new
clock types and helper macros to describe these PLLs.
Note that there is no use case for variable fractional 9.24 PLLs yet, as
the Cortex-A55 cores on R-Car S4-8 do not support High Performance mode.
Hence the PLL is always modeled as a fixed PLL, regardless of the
description,
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/5684eda1260435c8eceabc274e0b18cb280a6341.1721648548.git.geert+renesas@glider.be
The custom clock driver that models PLL clocks on R-Car Gen4 supports
variable clocks, while PLL1 uses a similar control register layout, but
is read-only.
Extend the existing support to fixed clocks and PLL1, and introduce a
new clock type and helper macro to describe a fixed PLL.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/841fbb63d472c357b3ce291a5991db3b847f96d8.1721648548.git.geert+renesas@glider.be
The custom clock driver that models PLL clocks on R-Car Gen4 supports
PLL2 on R-Car V4H/V4M only, while PLL3, PLL4, and PLL6 use the same
control register layout.
Extend the existing support to PLL3, PLL4, and PLL6, and introduce a new
clock type and helper macro to describe these PLLs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/84ead759782560ec5643711e6bdd787a751053ce.1721648548.git.geert+renesas@glider.be
R-Car Gen4 PLLs support fractional multiplication, which can improve
accuracy when configuring a specific frequency.
Add support for fractional multiplication to the custom clock driver
for PLLs, which is currently used only for PLL2 on R-Car V4H.
While at it, add the missing blank line after the function.
Note that Fractional Multiplication is not enabled by the driver,
but used only if the boot loaded enabled it before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/1a58ebef6f54460f49fb81ba9bbf288164de2646.1721648548.git.geert+renesas@glider.be
Improve readability by using the FIELD_GET() helper instead of
open-coding the same operation, and by adding field definitions to get
rid of hardcoded values.
While at it, move register definitions that are only used inside the
rcar-gen4-cpg.c source file out of the rcar-gen4-cpg.h header file.
Add a "CPG_" prefix to SD0CKCR1. Add comments where appropriate.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/fb19ad829738f02effa340fa04c178a162d41202.1721648548.git.geert+renesas@glider.be
The custom clock driver that models the PLL clocks on R-Car Gen4 assumes
the integer and fractional[*] multiplication field sizes as used on
R-Car V4H and V4M, representing a fractional 8.25 number.
Rename the related definitions, functions, and structures to clarify
this, and to prepare for the advent of support for the different field
sizes on R-Car S4-8.
[*] The fractional part is not yet supported.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/2ce9f9c75bfb6312129d416672f9691bbd11c0e7.1721648548.git.geert+renesas@glider.be
Simplify the `rzg2l-cpg` driver by removing explicit passing of `clks` and
`base` parameters in various clock registration functions. These values
are now accessed directly from the `priv` structure.
While at it, drop masking of parent clocks with 0xffff as nothing is ever
stored in the high bits.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240715103555.507767-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
We are using devres APIs for divider, mux and pll5 clocks so for
consistency use the devres APIs for module, fixed factor and PLL clocks.
While at it switched to clk_hw_register() instead of clk_register()
as this has been marked as deprecated interface.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240715103555.507767-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
r8a779h0_core_clks[], r8a779h0_mod_clks[], and cpg_pll_configs[] are
only used during initialization. Hence make them __initconst, so they
will be freed later.
Fixes: f077cab34d ("clk: renesas: cpg-mssr: Add support for R-Car V4M")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/35bbcfb914ddb377fa77e3425e4e7e232c7c2cf9.1720794214.git.geert+renesas@glider.be
Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the TAA CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-3-leitao@debian.org
