Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.
The MFD component registers and initializes the device.
Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240620161745.2312359-4-jogletre@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
CS40L50 is a haptic driver with waveform memory,
integrated DSP, and closed-loop algorithms.
Add a YAML DT binding document for this device.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240620161745.2312359-3-jogletre@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
A write sequence is a sequence of register addresses
and values executed by some Cirrus DSPs following
certain power state transitions.
Add support for Cirrus drivers to update or add to a
write sequence present in firmware.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240620161745.2312359-2-jogletre@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
We got another report that CT1000BX500SSD1 does not work with LPM.
If you look in libata-core.c, we have six different Crucial devices that
are marked with ATA_HORKAGE_NOLPM. This model would have been the seventh.
(This quirk is used on Crucial models starting with both CT* and
Crucial_CT*)
It is obvious that this vendor does not have a great history of supporting
LPM properly, therefore, add the ATA_HORKAGE_NOLPM quirk for all Crucial
BX SSD1 models.
Fixes: 7627a0edef ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Alessandro Maggio <alex.tkd.alex@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240627105551.4159447-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Remove obsolete RTSM DCSCB support which was only ever implemented
on a software model which is neither available to download nor
maintained. It predates the very first bL cluster based platforms.
Other change include addition of the missing MODULE_DESCRIPTION
macro in vexpress config bus driver.
-----BEGIN PGP SIGNATURE-----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=VAfv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jv0e
-----END PGP SIGNATURE-----
Merge tag 'vexpress-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/arm
Arm Vexpress updates for v6.11
Remove obsolete RTSM DCSCB support which was only ever implemented
on a software model which is neither available to download nor
maintained. It predates the very first bL cluster based platforms.
Other change include addition of the missing MODULE_DESCRIPTION
macro in vexpress config bus driver.
* tag 'vexpress-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
dt-bindings: arm: Remove obsolete RTSM DCSCB binding
arm: vexpress: Remove obsolete RTSM DCSCB support
Link: https://lore.kernel.org/r/20240620093924.375244-4-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We cannot use CLONE_VFORK because we also need to wait for the timeout
signal.
Restore tests timeout by using the original fork() call in __run_test()
but also in __TEST_F_IMPL(). Also fix a race condition when waiting for
the test child process.
Because test metadata are shared between test processes, only the
parent process must set the test PID (child). Otherwise, t->pid may be
set to zero, leading to inconsistent error cases:
# RUN layout1.rule_on_mountpoint ...
# rule_on_mountpoint: Test ended in some other way [127]
# OK layout1.rule_on_mountpoint
ok 20 layout1.rule_on_mountpoint
As safeguards, initialize the "status" variable with a valid exit code,
and handle unknown test exits as errors.
The use of fork() introduces a new race condition in landlock/fs_test.c
which seems to be specific to hostfs bind mounts, but I haven't found
the root cause and it's difficult to trigger. I'll try to fix it with
another patch.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/r/9341d4db-5e21-418c-bf9e-9ae2da7877e1@sirena.org.uk
Fixes: a86f18903d ("selftests/harness: Fix interleaved scheduling leading to race conditions")
Fixes: 24cf65a622 ("selftests/harness: Share _metadata between forked processes")
Link: https://lore.kernel.org/r/20240621180605.834676-1-mic@digikod.net
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
A full memory barrier is necessary at the end of the expedited grace
period to order:
1) The grace period completion (pictured by the GP sequence
number) with all preceding accesses. This pairs with rcu_seq_end()
performed by the concurrent kworker.
2) The grace period completion and subsequent post-GP update side
accesses. Pairs again against rcu_seq_end().
This full barrier is already provided by the final sync_exp_work_done()
test, making the subsequent explicit one redundant. Remove it and
improve comments.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
RCU stall printout fetches the EQS state of a CPU with a preceding full
memory barrier. However there is nothing to order this read against at
this debugging stage. It is inherently racy when performed remotely.
Do a plain read instead.
This was the last user of rcu_dynticks_snap().
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
When the boot CPU initializes the per-CPU data on behalf of all possible
CPUs, a sanity check is performed on each of them to make sure none is
initialized in an extended quiescent state.
This check involves a full memory barrier which is useless at this early
boot stage.
Do a plain access instead.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
When the grace period kthread checks the extended quiescent state
counter of a CPU, full ordering is necessary to ensure that either:
* If the GP kthread observes the remote target in an extended quiescent
state, then that target must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it exits that extended quiescent state.
or:
* If the GP kthread observes the remote target NOT in an extended
quiescent state, then the target further entering in an extended
quiescent state must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it enters that extended quiescent state.
This ordering is enforced through a full memory barrier placed right
before taking the first EQS snapshot. However this is superfluous
because the snapshot is taken while holding the target's rnp lock which
provides the necessary ordering through its chain of
smp_mb__after_unlock_lock().
Remove the needless explicit barrier before the snapshot and put a
comment about the implicit barrier newly relied upon here.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When the grace period kthread checks the extended quiescent state
counter of a CPU, full ordering is necessary to ensure that either:
* If the GP kthread observes the remote target in an extended quiescent
state, then that target must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it exits that extended quiescent state.
or:
* If the GP kthread observes the remote target NOT in an extended
quiescent state, then the target further entering in an extended
quiescent state must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it enters that extended quiescent state.
This ordering is enforced through a full memory barrier placed right
before taking the first EQS snapshot. However this is superfluous
because the snapshot is taken while holding the target's rnp lock which
provides the necessary ordering through its chain of
smp_mb__after_unlock_lock().
Remove the needless explicit barrier before the snapshot and put a
comment about the implicit barrier newly relied upon here.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When the grace period kthread checks the extended quiescent state
counter of a CPU, full ordering is necessary to ensure that either:
* If the GP kthread observes the remote target in an extended quiescent
state, then that target must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it exits that extended quiescent state. Also the GP kthread must
observe all accesses performed by the target prior it entering in
EQS.
or:
* If the GP kthread observes the remote target NOT in an extended
quiescent state, then the target further entering in an extended
quiescent state must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it enters that extended quiescent state. Also the GP kthread later
observing that EQS must also observe all accesses performed by the
target prior it entering in EQS.
This ordering is explicitly performed both on the first EQS snapshot
and on the second one as well through the combination of a preceding
full barrier followed by an acquire read. However the second snapshot's
full memory barrier is redundant and not needed to enforce the above
guarantees:
GP kthread Remote target
---- -----
// Access prior GP
WRITE_ONCE(A, 1)
// first snapshot
smp_mb()
x = smp_load_acquire(EQS)
// Access prior GP
WRITE_ONCE(B, 1)
// EQS enter
// implied full barrier by atomic_add_return()
atomic_add_return(RCU_DYNTICKS_IDX, EQS)
// implied full barrier by atomic_add_return()
READ_ONCE(A)
// second snapshot
y = smp_load_acquire(EQS)
z = READ_ONCE(B)
If the GP kthread above fails to observe the remote target in EQS
(x not in EQS), the remote target will observe A == 1 after further
entering in EQS. Then the second snapshot taken by the GP kthread only
need to be an acquire read in order to observe z == 1.
Therefore remove the needless full memory barrier on second snapshot.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In cloud environments it can be useful to *only* enable the vmexit
mitigation and leave syscalls vulnerable. Add that as an option.
This is similar to the old spectre_bhi=auto option which was removed
with the following commit:
36d4fe147c ("x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto")
with the main difference being that this has a more descriptive name and
is disabled by default.
Mitigation switch requested by Maksim Davydov <davydov-max@yandex-team.ru>.
[ bp: Massage. ]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/2cbad706a6d5e1da2829e5e123d8d5c80330148c.1719381528.git.jpoimboe@kernel.org
Duplicating the documentation of all the Spectre kernel cmdline options
in two separate files is unwieldy and error-prone. Instead just add a
reference to kernel-parameters.txt from spectre.rst.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Link: https://lore.kernel.org/r/450b5f4ffe891a8cc9736ec52b0c6f225bab3f4b.1719381528.git.jpoimboe@kernel.org
The direct-call syscall dispatch function doesn't know that the exit()
and exit_group() syscall handlers don't return, so the call sites aren't
optimized accordingly.
Fix that by marking the exit syscall declarations __noreturn.
Fixes the following warnings:
vmlinux.o: warning: objtool: x64_sys_call+0x2804: __x64_sys_exit() is missing a __noreturn annotation
vmlinux.o: warning: objtool: ia32_sys_call+0x29b6: __ia32_sys_exit_group() is missing a __noreturn annotation
Fixes: 1e3ad78334 ("x86/syscall: Don't force use of indirect calls for system calls")
Closes: https://lkml.kernel.org/lkml/6dba9b32-db2c-4e6d-9500-7a08852f17a3@paulmck-laptop
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/5d8882bc077d8eadcc7fd1740b56dfb781f12288.1719381528.git.jpoimboe@kernel.org
drm_edid_to_sad() might return an error or just zero. If that is the
case, we must not free the SADs because there was no allocation in
the first place.
Fixes: dab12fa8d2 ("drm/mediatek/dp: fix memory leak on ->get_edid callback audio detection")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20240604083337.1879188-1-mwalle@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/raw3270.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/con3270.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/fs3270.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-s390-drivers-s390-char-v1-1-d1cd23ff6476@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/block/dcssblk.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-s390-drivers-s390-block-dcssblk-v1-1-d9d19703abcb@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/s390/mm/cmm.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-s390-arch-s390-mm-v1-1-a360eed8c7c3@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/s390/lib/test_kprobes_s390.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/s390/lib/test_unwind.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/s390/lib/test_modules.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-s390-arch-s390-lib-v1-1-d7424b943973@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/s390/crypto/crc32-vx_s390.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-s390-arch-s390-crypto-v1-1-7120d406e7c7@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
On i.MX8MP, there are 3 interrupts, the third interrupt is
SPDIF wakeup interrupt from PHY
Add ref: dai-common.yaml for #sound-dai-cells is needed and
XCVR is a DAI device.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/1719481981-4069-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
clk_prepare_enable() may fail, so we should better check its return
value and propagate it in the case of error.
Fixes: 62a7fc32a6 ("ASoC: max98088: Add master clock handling")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20240628080534.843815-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The dummy DAI should allow any (reasonable) rates possible.
Make the rate continuous for dummy and set range from 5512Hz to 768kHz
The change is mostly cosmetic as dummy is skipped when setting
the hwparams.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20240628120130.2015665-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the Xylanta SAINT3 product family.
Cc: Andy Jackson <andy@xylanta.com>
Cc: Ken Aitchison <ken@xylanta.com>
Tested-by: Andy Jackson <andy@xylanta.com>
Link: https://lore.kernel.org/all/20240625140353.769373-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Josef Bacik <josef@toxicpanda.com> says:
Currently if you want to get mount options for a mount and you're using
statmount(), you still have to open /proc/mounts to parse the mount options.
statmount() does have the ability to store an arbitrary string however,
additionally the way we do that is with a seq_file, which is also how we use
->show_options for the individual file systems.
Extent statmount() to have a flag for fetching the mount options of a mount.
This allows users to not have to parse /proc mount for anything related to a
mount. I've extended the existing statmount() test to validate this feature
works as expected. As you can tell from the ridiculous amount of silly string
parsing, this is a huge win for users and climate change as we will no longer
have to waste several cycles parsing strings anymore.
Josef Bacik (4):
fs: rename show_mnt_opts -> show_vfsmnt_opts
fs: add a helper to show all the options for a mount
fs: export mount options via statmount()
sefltests: extend the statmount test for mount options
fs/internal.h | 5 +
fs/namespace.c | 7 +
fs/proc_namespace.c | 29 ++--
include/uapi/linux/mount.h | 3 +-
.../filesystems/statmount/statmount_test.c | 131 +++++++++++++++++-
5 files changed, 164 insertions(+), 11 deletions(-)
Link: https://lore.kernel.org/r/cover.1719257716.git.josef@toxicpanda.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
statmount() can export arbitrary strings, so utilize the __spare1 slot
for a mnt_opts string pointer, and then support asking for and setting
the mount options during statmount(). This calls into the helper for
showing mount options, which already uses a seq_file, so fits in nicely
with our existing mechanism for exporting strings via statmount().
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/3aa6bf8bd5d0a21df9ebd63813af8ab532c18276.1719257716.git.josef@toxicpanda.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[brauner: only call sb->s_op->show_options()]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Josef Bacik <josef@toxicpanda.com> says:
Currently the only way to iterate over mount entries in mount namespaces that
aren't your own is to trawl through /proc in order to find /proc/$PID/mountinfo
for the mount namespace that you want. This is hugely inefficient, so extend
both statmount() and listmount() to allow specifying a mount namespace id in
order to get to mounts in other mount namespaces.
There are a few components to this
1. Having a global index of the mount namespace based on the ->seq value in the
mount namespace. This gives us a unique identifier that isn't re-used.
2. Support looking up mount namespaces based on that unique identifier, and
validating the user has permission to access the given mount namespace.
3. Provide a new ioctl() on nsfs in order to extract the unique identifier we
can use for statmount() and listmount().
The code is relatively straightforward, and there is a selftest provided to
validate everything works properly.
This is based on vfs.all as of last week, so must be applied onto a tree that
has Christians error handling rework in this area. If you wish you can pull the
tree directly here
https://github.com/josefbacik/linux/tree/listmount.combined
Christian and I collaborated on this series, which is why there's patches from
both of us in this series.
Christian Brauner (4):
fs: relax permissions for listmount()
fs: relax permissions for statmount()
fs: Allow listmount() in foreign mount namespace
fs: Allow statmount() in foreign mount namespace
Josef Bacik (4):
fs: keep an index of current mount namespaces
fs: export the mount ns id via statmount
fs: add an ioctl to get the mnt ns id from nsfs
selftests: add a test for the foreign mnt ns extensions
fs/mount.h | 2 +
fs/namespace.c | 240 ++++++++++--
fs/nsfs.c | 14 +
include/uapi/linux/mount.h | 6 +-
include/uapi/linux/nsfs.h | 2 +
.../selftests/filesystems/statmount/Makefile | 2 +-
.../filesystems/statmount/statmount.h | 46 +++
.../filesystems/statmount/statmount_test.c | 53 +--
.../filesystems/statmount/statmount_test_ns.c | 360 ++++++++++++++++++
9 files changed, 659 insertions(+), 66 deletions(-)
create mode 100644 tools/testing/selftests/filesystems/statmount/statmount.h
create mode 100644 tools/testing/selftests/filesystems/statmount/statmount_test_ns.c
Link: https://lore.kernel.org/r/cover.1719243756.git.josef@toxicpanda.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
cur_cpu_spec->cpu_name is appended to ppc_hw_desc before cur_cpu_spec
has taken on its final value. This is illustrated on pseries by
comparing the CPU name as reported at boot ("POWER8E (raw)") to the
contents of /proc/cpuinfo ("POWER8 (architected)"):
$ dmesg | grep Hardware
Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 \
of:IBM,FW860.50 (SV860_146) hv:phyp pSeries
$ grep -m 1 ^cpu /proc/cpuinfo
cpu : POWER8 (architected), altivec supported
Some 44x models would appear to be affected as well; see
identical_pvr_fixup().
This results in incorrect CPU information in stack dumps --
ppc_hw_desc is an input to dump_stack_set_arch_desc().
Delay gathering the CPU name until after all potential calls to
identify_cpu().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: bd649d40e0 ("powerpc: Add PVR & CPU name to hardware description")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240603-fix-cpu-hwdesc-v1-1-945f2850fcaa@linux.ibm.com
Smatch warns:
arch/powerpc/kernel/rtas.c:1932 __do_sys_rtas() warn: potential
spectre issue 'args.args' [r] (local cap)
The 'nargs' and 'nret' locals come directly from a user-supplied
buffer and are used as indexes into a small stack-based array and as
inputs to copy_to_user() after they are subject to bounds checks.
Use array_index_nospec() after the bounds checks to clamp these values
for speculative execution.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240530-sys_rtas-nargs-nret-v1-1-129acddd4d89@linux.ibm.com
Replace 4xx usage with 44x, and replace 4xx_SOC with 44x.
Also, as pointed out by Christophe, if 44x || BOOKE can be simplified to
just test BOOKE, because 44x always selects BOOKE.
Retain the CONFIG_4xx symbol, as there are drivers that use it to mean
4xx || 44x, those will need updating before CONFIG_4xx can be removed.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240628121201.130802-6-mpe@ellerman.id.au
Now that 40x platforms have gone, remove support
for 40x in the core of powerpc arch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240628121201.130802-4-mpe@ellerman.id.au
40x platforms have been orphaned for many years.
Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240628121201.130802-1-mpe@ellerman.id.au
mtk_find_possible_crtcs() assumes that the main path will always have
the CRTC with id 0, the ext id 1 and the third id 2. This is only true
if the paths are all available. But paths are optional (see also
comment in mtk_drm_kms_init()), e.g. the main path might not be enabled
or available at all. Then the CRTC IDs will shift one up, e.g. ext will
be 0 and the third path will be 1.
To fix that, dynamically calculate the IDs by the presence of the paths.
While at it, make the return code a signed one and return -ENODEV if no
path is found and handle the error in the callers.
Fixes: 5aa8e76476 ("drm/mediatek: dpi/dsi: Change the getting possible_crtc way")
Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240606092122.2026313-1-mwalle@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240624132433.1244750-2-u.kleine-koenig@baylibre.com
kexec on pseries disables AIL (reloc_on_exc), required for scv
instruction support, before other CPUs have been shut down. This means
they can execute scv instructions after AIL is disabled, which causes an
interrupt at an unexpected entry location that crashes the kernel.
Change the kexec sequence to disable AIL after other CPUs have been
brought down.
As a refresher, the real-mode scv interrupt vector is 0x17000, and the
fixed-location head code probably couldn't easily deal with implementing
such high addresses so it was just decided not to support that interrupt
at all.
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Closes: https://lore.kernel.org/3b4b2943-49ad-4619-b195-bc416f1d1409@linux.ibm.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Link: https://msgid.link/20240625134047.298759-1-npiggin@gmail.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
