Introduce add/remove config perf ops for OA. OA configurations consist of a
set of event/counter select register address/value pairs. The add_config
perf op validates and stores such configurations and also exposes them in
the metrics sysfs. These configurations will be programmed to OA unit HW
when an OA stream using a configuration is opened. The OA stream can also
switch to other stored configurations.
v2: Start config id's from 1 and other minor review comments (Umesh)
v3: Add 32 bit build
v4: Add kernel doc for non-static functions (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-6-ashutosh.dixit@intel.com
Initialize OA unit data struct's for each gt during device probe. Also
assign OA units for hardware engines.
v2: Remove XE_OA_UNIT_OAG/XE_OA_UNIT_OAM_SAMEDIA_0 enum (Umesh)
Change mtl_oa_base to 0x13000 (Umesh)
v3: Switch to drmm_ functions and other cleanups (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-5-ashutosh.dixit@intel.com
Add and initialize supported OA data formats for various platforms
(including Xe2). User can request OA data in any supported format.
Bspec: 52198, 60942, 61101
v2: Start 'xe_oa_format_name' enum from 0 (Umesh)
Fix error rewind with OA (Umesh)
v3: Use graphics versions rather than absolute platform names
v4: Add missing kernel doc for struct memebers and enum and other minor
changes (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-4-ashutosh.dixit@intel.com
Normally only superuser/root can access perf counter data. However,
superuser can set perf_stream_paranoid sysctl to 0 to allow non-privileged
users to also access perf data. perf_stream_paranoid is introduced at the
perf layer to allow different perf stream types to share this access
mechanism.
v2: Add kernel doc for non-static functions (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-3-ashutosh.dixit@intel.com
In Xe, the plan is to support multiple types of perf counter streams (OA is
only one type of these streams). Rather than introduce NxM ioctls for
these (N perf streams with M ioctl's per perf stream), we decide to
multiplex these (N different stream types and the M ops for each of these
stream types) through a single PERF ioctl. This multiplexing is the purpose
of the PERF layer.
In addition to PERF DRM ioctl's, another set of ioctl's on the PERF fd are
defined. These are expected to be common to different PERF stream types and
therefore defined at the PERF layer itself.
v2: Add param_size to 'struct drm_xe_perf_param' (Umesh)
v3: Rename 'enum drm_xe_perf_ops' to
'enum drm_xe_perf_ioctls' (Guy Zadicario)
Add DRM_ prefix to ioctl names to indicate uapi names
v4: Add 'enum drm_xe_perf_op' previously missed out (Guy Zadicario)
v5: Squash the ops and PERF layer patches into a single patch (Umesh)
Remove param_size from struct 'drm_xe_perf_param' (Umesh)
v6: Add DRM_XE_PERF_IOCTL_STATUS
v7: Add DRM_XE_PERF_IOCTL_INFO
v8: Fix Copyright years, fix DRM_XE_PERF_TYPE_MAX, move '#include
"xe_perf.h"' to xe_perf.c, add kernel doc (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Guy Zadicario <gzadicario@habana.ai>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-2-ashutosh.dixit@intel.com
A temporary fixup was made in commit 24d0d98af1 ("drm/xe/xe2lpm: Fixup
Wa_14020756599") due to limitations in the RTP infra. Now that RTP has
support for OR condition that change can be removed. RTP now also
supports checking any GT, so use that instead of the more specific
xe_rtp_match_when_media2000() used in that commit.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618050044.324454-6-lucas.demarchi@intel.com
One surprising factor of GRAPHICS_VERSION()/MEDIA_VERSION() matching for
people adding new WAs is that it implicitly checks that the
graphics/media IP under check is of that specific type and not that the
device contains a media/graphics IP of that version. Add a new
*_ANY_GT() variant that can be used in that case.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618050044.324454-5-lucas.demarchi@intel.com
Some workarounds started to depend on different set of conditions where
the action should be applied if any of them match. See e.g.
commit 24d0d98af1 ("drm/xe/xe2lpm: Fixup Wa_14020756599"). Add
XE_RTP_MATCH_OR that allows to implement a logical OR for the rules.
Normal precedence applies:
r1, r2, OR, r3
means
(r1 AND r2) OR r3
The check is shortcut as soon as a set of conditions match.
v2: Do not match on empty number of rules-other-than-OR evaluated
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618050044.324454-4-lucas.demarchi@intel.com
Having at most 4 rules per entry is already reaching the maximum.
Expand it to 6 to allow for more room. With the addition of OR
condition for rules, this will very soon not be sufficient.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618050044.324454-3-lucas.demarchi@intel.com
If none of the rules match, there should be 0 entries in the sr xarray,
so none of them should have a register matching.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618050044.324454-2-lucas.demarchi@intel.com
Enhance cpupower build process description with the information on
building and installing the utility to the user defined directories
as well as with the information on the way of running the utility from
the custom defined installation directory.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make "cpupower" building process more user friendly by adding 'help'
target to the main makefile. This target describes various build
and cleaning options available to the user.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Replace a dead reference link to a turbo boost technology description with
a reference to a root page of the technology on the Intel site, and add
another one, describing power management technology, which includes short
description of the turbo boost.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Dell SKU 0C64 has a single rt1318 amplifier.
The prefix name of control still needs to be set rt1318-1 corresponding to UCM config.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240612075740.1678082-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Linus Walleij pointed out that a new comer might be confused about the
difference between set_bit() and __set_bit(). Add a comment explaining
the difference.
Link: https://lore.kernel.org/all/CACRpkdZFPG_YLici-BmYfk9HZ36f4WavCN3JNotkk8cPgCODCg@mail.gmail.com/
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/find_bit_benchmark.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/cpumask_kunit.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/test_bitmap.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Now that assign_bit() is a thin macro wrapper around set_bit() and
clear_bit(), we can use it in cpumask API and drop duplicating
implementations of set_cpu_xxx() helpers with no additional overhead.
Bloat-o-meter reports almost 2k less of generated code for allyesconfig,
mostly in kernel/cpu.c:
add/remove: 2/4 grow/shrink: 3/4 up/down: 498/-2228 (-1730)
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
This commit adds the get_completed_synchronize_srcu() and the
same_state_synchronize_srcu() functions. The first returns a cookie
that is always interpreted as corresponding to an expired grace period.
The second does an equality comparison of a pair of cookies.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Now that we have polled SRCU grace periods, a grace period can be
started by start_poll_synchronize_srcu() as well as call_srcu(),
synchronize_srcu(), and synchronize_srcu_expedited(). This commit
therefore calls out this new start_poll_synchronize_srcu() possibility
in the comment on the WARN_ON().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds NUM_ACTIVE_SRCU_POLL_OLDSTATE, which gives the maximum
number of distinct return values from get_state_synchronize_rcu()
that can, at a given point in time, correspond to not-completed SRCU
grace periods.
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Closes: https://lore.kernel.org/all/irycqy4sinjdgm2hkyix2bffunpcmuwgeufsx6nlljvqme3wiu@ify3zdnrmzph/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Interrupts are enabled in srcu_gp_end(), so this commit switches from
spin_lock_irqsave_rcu_node() and spin_unlock_irqrestore_rcu_node()
to spin_lock_irq_rcu_node() and spin_unlock_irq_rcu_node().
Link: https://lore.kernel.org/all/febb13ab-a4bb-48b4-8e97-7e9f7749e6da@moroto.mountain/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Interrupts are enabled in rcu_gp_init(), so this commit switches from
local_irq_save() and local_irq_restore() to local_irq_disable() and
local_irq_enable().
Link: https://lore.kernel.org/all/febb13ab-a4bb-48b4-8e97-7e9f7749e6da@moroto.mountain/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the synchronize_rcu() common case, we will have less than
SR_MAX_USERS_WAKE_FROM_GP number of users per GP. Waking up the kworker
is pointless just to free the last injected wait head since at that point,
all the users have already been awakened.
Introduce a new counter to track this and prevent the wakeup in the
common case.
[ paulmck: Remove atomic_dec_return_release in cannot-happen state. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add an abstraction around the kernels firmware API to request firmware
images. The abstraction provides functions to access the firmware's size
and backing buffer.
The firmware is released once the abstraction instance is dropped.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240618154841.6716-3-dakr@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an (always) reference-counted abstraction for a generic C `struct
device`. This abstraction encapsulates existing `struct device` instances
and manages its reference count.
Subsystems may use this abstraction as a base to abstract subsystem
specific device instances based on a generic `struct device`, such as
`struct pci_dev`.
Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://lore.kernel.org/r/20240618154841.6716-2-dakr@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark a vCPU as preempted/ready if-and-only-if it's scheduled out while
running. i.e. Do not mark a vCPU preempted/ready if it's scheduled out
during a non-KVM_RUN ioctl() or when userspace is doing KVM_RUN with
immediate_exit.
Commit 54aa83c901 ("KVM: x86: do not set st->preempted when going back
to user space") stopped marking a vCPU as preempted when returning to
userspace, but if userspace then invokes a KVM vCPU ioctl() that gets
preempted, the vCPU will be marked preempted/ready. This is arguably
incorrect behavior since the vCPU was not actually preempted while the
guest was running, it was preempted while doing something on behalf of
userspace.
Marking a vCPU preempted iff its running also avoids KVM dirtying guest
memory after userspace has paused vCPUs, e.g. for live migration, which
allows userspace to collect the final dirty bitmap before or in parallel
with saving vCPU state, without having to worry about saving vCPU state
triggering writes to guest memory.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240503181734.1467938-4-dmatlack@google.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Ensure that any new KVM code that references immediate_exit gets extra
scrutiny by renaming it to immediate_exit__unsafe in kernel code.
All fields in struct kvm_run are subject to TOCTOU races since they are
mapped into userspace, which may be malicious or buggy. To protect KVM,
introduces a new macro that appends __unsafe to select field names in
struct kvm_run, hinting to developers and reviewers that accessing such
fields must be done carefully.
Apply the new macro to immediate_exit, since userspace can make
immediate_exit inconsistent with vcpu->wants_to_run, i.e. accessing
immediate_exit directly could lead to unexpected bugs in the future.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240503181734.1467938-3-dmatlack@google.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Introduce vcpu->wants_to_run to indicate when a vCPU is in its core run
loop, i.e. when the vCPU is running the KVM_RUN ioctl and immediate_exit
was not set.
Replace all references to vcpu->run->immediate_exit with
!vcpu->wants_to_run to avoid TOCTOU races with userspace. For example, a
malicious userspace could invoked KVM_RUN with immediate_exit=true and
then after KVM reads it to set wants_to_run=false, flip it to false.
This would result in the vCPU running in KVM_RUN with
wants_to_run=false. This wouldn't cause any real bugs today but is a
dangerous landmine.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240503181734.1467938-2-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The KVM_SET_BOOT_CPU_ID ioctl missed to reject invalid vCPU IDs. Verify
this no longer works and gets rejected with an appropriate error code.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-6-minipli@grsecurity.net
[sean: add test for MAX_VCPU_ID+1, always do negative test]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor accessing the SDCA extension properties to make it easier to
access multiple properties to assist with future features. Return the
node itself and allow the caller to read the actual properties.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240611132556.1557075-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The KVM_CREATE_VCPU ioctl ABI had an implicit integer truncation bug,
allowing 2^32 aliases for a vCPU ID by setting the upper 32 bits of a 64
bit ioctl() argument.
It also allowed excluding a once set boot CPU ID.
Verify this no longer works and gets rejected with an error.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-5-minipli@grsecurity.net
[sean: tweak assert message+comment for 63:32!=0 testcase]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Hardcoding the number of CPUs at compile time does improve code
generation, but if you get it wrong the result will be confusion.
We already limited this earlier to only "experts" (see commit
fe5759d5bf "cpumask: limit visibility of FORCE_NR_CPUS"), but with
distro kernel configs often having EXPERT enabled, that turns out to not
be much of a limit.
To quote the philosophers at Disney: "Everyone can be an expert. And
when everyone's an expert, no one will be".
There's a runtime warning if you then set nr_cpus to anything but the
forced number, but apparently that can be ignored too [1] and by then
it's pretty much too late anyway.
If we had some real way to limit this to "embedded only", maybe it would
be worth it, but let's see if anybody even notices that the option is
gone. We need to simplify kernel configuration anyway.
Link: https://lore.kernel.org/all/20240618105036.208a8860@rorschach.local.home/ [1]
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul McKenney <paulmck@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the BSP vCPU ID was already set, ensure it doesn't get excluded when
limiting vCPU IDs via KVM_CAP_MAX_VCPU_ID.
[mks: provide commit message, code by Sean]
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-4-minipli@grsecurity.net
Signed-off-by: Sean Christopherson <seanjc@google.com>
Do not accept IDs which are definitely invalid by limit checking the
passed value against KVM_MAX_VCPU_IDS and 'max_vcpu_ids' if it was
already set.
This ensures invalid values, especially on 64-bit systems, don't go
unnoticed and lead to a valid id by chance when truncated by the final
assignment.
Fixes: 73880c80aa ("KVM: Break dependency between vcpu index in vcpus array and vcpu_id.")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-3-minipli@grsecurity.net
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
If, on a 64 bit system, a vCPU ID is provided that has the upper 32 bits
set to a non-zero value, it may get accepted if the truncated to 32 bits
integer value is below KVM_MAX_VCPU_IDS and 'max_vcpus'. This feels very
wrong and triggered the reporting logic of PaX's SIZE_OVERFLOW plugin.
Instead of silently truncating and accepting such values, pass the full
value to kvm_vm_ioctl_create_vcpu() and make the existing limit checks
return an error.
Even if this is a userland ABI breaking change, no sane userland could
have ever relied on that behaviour.
Reported-by: PaX's SIZE_OVERFLOW plugin running on grsecurity's syzkaller
Fixes: 6aa8b732ca ("[PATCH] kvm: userspace interface")
Cc: Emese Revfy <re.emese@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-2-minipli@grsecurity.net
[sean: tweak comment about INT_MAX assertion]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Bail from outer address space loop, not just the inner memslot loop, when
a "null" handler is encountered by __kvm_handle_hva_range(), which is the
intended behavior. On x86, which has multiple address spaces thanks to
SMM emulation, breaking from just the memslot loop results in undefined
behavior due to assigning the non-existent return value from kvm_null_fn()
to a bool.
In practice, the bug is benign as kvm_mmu_notifier_invalidate_range_end()
is the only caller that passes handler=kvm_null_fn, and it doesn't set
flush_on_ret, i.e. assigning garbage to r.ret is ultimately ignored. And
for most configuration the compiler elides the entire sequence, i.e. there
is no undefined behavior at runtime.
------------[ cut here ]------------
UBSAN: invalid-load in arch/x86/kvm/../../../virt/kvm/kvm_main.c:655:10
load of value 160 is not a valid value for type '_Bool'
CPU: 370 PID: 8246 Comm: CPU 0/KVM Not tainted 6.8.2-amdsos-build58-ubuntu-22.04+ #1
Hardware name: AMD Corporation Sh54p/Sh54p, BIOS WPC4429N 04/25/2024
Call Trace:
<TASK>
dump_stack_lvl+0x48/0x60
ubsan_epilogue+0x5/0x30
__ubsan_handle_load_invalid_value+0x79/0x80
kvm_mmu_notifier_invalidate_range_end.cold+0x18/0x4f [kvm]
__mmu_notifier_invalidate_range_end+0x63/0xe0
__split_huge_pmd+0x367/0xfc0
do_huge_pmd_wp_page+0x1cc/0x380
__handle_mm_fault+0x8ee/0xe50
handle_mm_fault+0xe4/0x4a0
__get_user_pages+0x190/0x840
get_user_pages_unlocked+0xe0/0x590
hva_to_pfn+0x114/0x550 [kvm]
kvm_faultin_pfn+0xed/0x5b0 [kvm]
kvm_tdp_page_fault+0x123/0x170 [kvm]
kvm_mmu_page_fault+0x244/0xaa0 [kvm]
vcpu_enter_guest+0x592/0x1070 [kvm]
kvm_arch_vcpu_ioctl_run+0x145/0x8a0 [kvm]
kvm_vcpu_ioctl+0x288/0x6d0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x77/0x120
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK>
---[ end trace ]---
Fixes: 071064f14d ("KVM: Don't take mmu_lock for range invalidation unless necessary")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/b8723d39903b64c241c50f5513f804390c7b5eec.1718203311.git.babu.moger@amd.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Driver does not modify static wcd939x_sdw_ch_info array, so it can be
made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-21-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify few static data (MBHC reg fields, IRQ chip), so
make them const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-20-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
wcd934x_codec_parse_data() function is called only from probe(), so
printing errors on resource acquisition is discouraged, because it can
pollute dmesg in case of probe deferral. The actual deferral is here
unlikely, but still the code is a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-10-0d15885b2a06@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
