The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transaction is initiated on one of 1394 OHCI
controller, however the existing tracepoints events has the lack of data
about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
We only use the mapping in a single context in a short and contained scope,
so kmap_local_page is sufficient and cheaper. This will also allow
skb_datagram_iter to be called from softirq context.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20240613113504.1079860-1-sagi@grimberg.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
mlxsw: Handle MTU values
Amit Cohen writes:
The driver uses two values for maximum MTU, but neither is accurate.
In addition, the value which is configured to hardware is not calculated
correctly. Handle these issues and expose accurate values for minimum
and maximum MTU per netdevice.
Add test cases to check that the exposed values are really supported.
Patch set overview:
Patches #1-#3 set the driver to use accurate values for MTU
Patch #4 aligns the driver to always use the same value for maximum MTU
Patch #5 adds a test
====================
Link: https://lore.kernel.org/r/cover.1718275854.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add cases to check minimum and maximum MTU which are exposed via
"ip -d link show". Test configuration and traffic. Use VLAN devices as
usually VLAN header (4 bytes) is not included in the MTU, and drivers
should configure hardware correctly to send maximum MTU payload size
in VLAN tagged packets.
$ ./min_max_mtu.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: Test maximum MTU configuration [ OK ]
TEST: Test traffic, packet size is maximum MTU [ OK ]
TEST: Test minimum MTU configuration [ OK ]
TEST: Test traffic, packet size is minimum MTU [ OK ]
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/89de8be8989db7a97f3b39e3c9da695673e78d2e.1718275854.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver uses two different values for maximum MTU, one is
stored in mlxsw_port->dev->max_mtu and the second is stored in
mlxsw_port->max_mtu. The second one is set to value which is queried from
firmware. This value was never tested, and unfortunately is not really
supported. That means that with the existing code, user can set MTU to
X, which is not really supported by firmware and which is bigger than
buffer size which is allocated in pci.
To make the driver consistent, use only mlxsw_port->dev->max_mtu for
maximum MTU value, for buffers headroom add Ethernet frame headers, which
are not included in mlxsw_port->dev->max_mtu. Remove mlxsw_port->max_mtu.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/89fa6f804386b918d337e736e14ac291bb947483.1718275854.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver uses ETH_MAX_MTU as maximum MTU of netdevices,
instead, use the accurate value which is supported by the driver.
Subtract Ethernet headers which are taken into account by hardware for
MTU checking, as described in the previous patch.
Set minimum MTU to ETH_MIN_MTU, as zero MTU is not really supported.
With this change:
a. The stack will do the MTU checking, so we can remove it from the driver.
b. User space will be able to query the actual MTU limits.
Before this patch:
$ ip -j -d link show dev swp1 | jq | grep mtu
"mtu": 1500,
"min_mtu": 0,
"max_mtu": 65535,
With this patch:
$ ip -j -d link show dev swp1 | jq | grep mtu
"mtu": 1500,
"min_mtu": 68,
"max_mtu": 10218,
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/be8232e38c196ecb607f82c5e000ea427ce22abb.1718275854.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ethernet frame consists of - Ethernet header, payload, FCS. The MTU value
which is used by user is the size of the payload, which means that when
user sets MTU to X, the total frame size will be larger due to the addition
of the Ethernet header and FCS.
Spectrum ASICs take into account Ethernet header and FCS as part of packet
size for MTU check. Adjust MTU value when user sets MTU, to configure the
MTU size which is required by hardware. The Tx header length which was used
by the driver is not relevant for such calculation, take into account
Ethernet header (with VLAN extension) and FCS.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/f3203c2477bb8ed18b1e79642fa3e3713e1e55bb.1718275854.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently mlxsw driver supports up to 10000 bytes for maximum MTU, this
value is not accurate, we can support up to 10K bytes. Change the value to
the maximum supported MTU by firmware.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/666f51681234aeef09d771833ccb6e94bd323c88.1718275854.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- A couple of fixes for regressions resulting from the uncoupling of
physical vs virtual kernel address spaces: fix the mapping of the
kernel image using large pages; enforce alignment checks on physical
addresses before creating large pages
- Update defconfigs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmZsyVMACgkQjYWKoQLX
FBiMBwf+Ly2mFUG3LQNPauvjhNkhH5NbkNafQTX9yzuDFn2fvQGUH+IruUosa3WI
egYWP3Z6W0nfpBGWcDleuWCcSUmUvmEiFFI4q30Ze0Q7IMm9VE14/PjSeplWwstV
pFwpZIqofvXFMbP7TYw4R6lwTe1MTtXLQSv53SMrIufeq0OnSWpWp/2dL2AC36fe
QuQCqHDuqbEvoV+3s35+xQ6OMoWcWSfG6gHgBPyQ6brkI39PlZwymdSJFanUUsl3
DCextvbUJEPSI2M5Dc0XrpOnahrN75Sh+w6FYMBcUxVMMNHdbvUXKDzQK3aPL4sQ
qNhzZJtlK545PpYEZ4TVDuU7zPQnzw==
=w9Pa
-----END PGP SIGNATURE-----
Merge tag 's390-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- A couple of fixes for regressions resulting from the uncoupling of
physical vs virtual kernel address spaces: fix the mapping of the
kernel image using large pages; enforce alignment checks on physical
addresses before creating large pages
- Update defconfigs
* tag 's390-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Restore mapping of kernel image using large pages
s390/mm: Allow large pages only for aligned physical addresses
s390: Update defconfigs
Unlike copy_from_user(), put_user() and get_user() return -EFAULT on
error. Use the error code directly instead of setting it.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/04a018e8-7433-4f67-8ddd-9357a0114f87@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: provide platform select_pcs method
This series adds a select_pcs() method to the stmmac platform data to
allow platforms that need to provide their own PCSes to do so, moving
the decision making into platform code.
This avoids questions such as "what should the priority of XPCS vs
some other platform PCS be?" and when we provide a PCS for the
internal PCS, how that interacts with both the XPCS and platform
provided PCS.
Note that if a platform implements the select_pcs() method, then the
return values are:
- a phylink_pcs pointer - the PCS to be used.
- NULL - no phylink_pcs to be used.
Otherwise (if not implemented or returns an error-pointer), then
allow the the stmmac internal PCS to be used if appropriate (once
that patch set is merged.)
Patch 1 introduces the new method.
Patch 2 converts Intel mGBE to use this to provide the XPCS and
removes the XPCS decision making from core code.
Patch 3 provides an implementation for rzn1 to return its PCS.
Patch 4 does the same for socfpga.
Patch 5 removes the core code returning priv->hw->phylink_pcs.
No functional change is anticipated. Once this has been merged, it
will be expected that platforms should populate all three PCS
methods or none of the PCS methods.
====================
Link: https://lore.kernel.org/r/ZmrLbdwv6ALoy+gs@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since all platform providers of PCS now populate the select_pcs()
method, there is no need for the common code to look at
priv->hw->phylink_pcs, so remove it.
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1sHhoh-00FetT-3S@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a .select_pcs() implementation which returns the phylink PCS
that was created in the .pcs_init() method.
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1sHhob-00FetN-Vp@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a .select_pcs() implementation which returns the phylink PCS
that was created in the .pcs_init() method.
Tested-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1sHhoW-00FetH-GD@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the code returning the XPCS into dwmac-intel, which is the only
user of XPCS. Fill in the select_pcs() implementation only when we are
going to setup the XPCS, thus when it should be present.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1sHhoR-00FetB-CP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow platform drivers to provide their logic to select an appropriate
PCS.
Tested-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1sHhoM-00Fesu-8E@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-06-11 (ice)
This series contains updates to ice driver only.
En-Wei Wu resolves IRQ collision during suspend.
Paul corrects 200Gbps speed being reported as unknown.
Wojciech adds retry mechanism when package download fails.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: implement AQ download pkg retry
ice: fix 200G link speed message log
ice: avoid IRQ collision to fix init failure on ACPI S3 resume
====================
Link: https://lore.kernel.org/r/20240613154514.1948785-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core:
- Werror Kconfig fix
panel:
- add orientation quirk for Aya Neo KUN
- fix runtime warning on panel/bridge release
nouveau:
- remove unused struct
- fix wq crash on cards with no display
amdgpu:
- fix bo release clear page warning
xe:
- update MAINTAINERS
- Use correct forcewake assertions.
- Assert that VRAM provisioning is only done on DGFX.
- Flush render caches before user-fence signalling on all engines.
- Move the disable_c6 call since it was sometimes never called.
exynos:
- fix regression with fallback mode
- fix EDID related memory leak
- remove redundant code
komeda:
- fix debugfs conditional compilations
- check pointer error value
renesas:
- atomic shutdown fix
mediatek:
- atomic shutdown fix
-----BEGIN PGP SIGNATURE-----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=ZzdU
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-06-15' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes. Seems a little quieter than usual, but still a bunch of
stuff across the board. Mostly xe, some exynos and nouveau fixes.
core:
- Werror Kconfig fix
panel:
- add orientation quirk for Aya Neo KUN
- fix runtime warning on panel/bridge release
nouveau:
- remove unused struct
- fix wq crash on cards with no display
amdgpu:
- fix bo release clear page warning
xe:
- update MAINTAINERS
- Use correct forcewake assertions
- Assert that VRAM provisioning is only done on DGFX
- Flush render caches before user-fence signalling on all engines
- Move the disable_c6 call since it was sometimes never called
exynos:
- fix regression with fallback mode
- fix EDID related memory leak
- remove redundant code
komeda:
- fix debugfs conditional compilations
- check pointer error value
renesas:
- atomic shutdown fix
mediatek:
- atomic shutdown fix"
* tag 'drm-fixes-2024-06-15' of https://gitlab.freedesktop.org/drm/kernel:
arm/komeda: Remove all CONFIG_DEBUG_FS conditional compilations
drm/xe: move disable_c6 call
drm/xe: flush engine buffers before signalling user fence on all engines
drm/xe/pf: Assert LMEM provisioning is done only on DGFX
drm/xe/xe_gt_idle: use GT forcewake domain assertion
drm/mediatek: Call drm_atomic_helper_shutdown() at shutdown time
drm: renesas: shmobile: Call drm_atomic_helper_shutdown() at shutdown time
drm/nouveau: remove unused struct 'init_exec'
drm/nouveau: don't attempt to schedule hpd_work on headless cards
drm/amdgpu: Fix the BO release clear memory warning
drm/bridge/panel: Fix runtime warning on panel bridge release
drm/komeda: check for error-valued pointer
drm: panel-orientation-quirks: Add quirk for Aya Neo KUN
drm/exynos/vidi: fix memory leak in .get_modes()
drm/exynos: dp: drop driver owner initialization
drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found
drm: have config DRM_WERROR depend on !WERROR
MAINTAINERS: Update Xe driver maintainers
MAINTAINERS: update Xe driver maintainers
Tariq Toukan says:
====================
mlx5 misc patches 2023-06-13
This patchset contains small code cleanups and enhancements from the
team to the mlx5 core and Eth drivers.
Series generated against:
commit 3ec8d7572a ("CDC-NCM: add support for Apple's private interface")
====================
Link: https://lore.kernel.org/r/20240613210036.1125203-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Calculate the pseudo-header checksum for both IPSec transport mode and
IPSec tunnel mode for mlx5 devices that do not implement a pure hardware
checksum offload for L4 checksum calculation. Introduce a capability bit
that identifies such mlx5 devices.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the tcp specific helpers to calculate the tcp pseudo header checksum
instead of the csum_*_magic ones.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code no longer treats only UDP tunnels, adjust the outdated comment.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently a ct entry is stored in both ct and ct-nat tables. ct
action is directed to the ct table, while ct nat action is directed
to the nat table. ct-nat entries perform the nat header rewrites,
if required. The current design assures that a ct action will match
in hardware even if the tuple has nat configured, it will just not
execute it. However, storing each connection in two tables increases
the system's memory consumption while reducing its insertion rate.
Offload a connection to either ct or the ct-nat table. Add a miss
fall-through rule from ct-nat table to the ct table allowing ct(nat)
action on non-natted connections.
ct action on natted connections, by default, will be handled by the
software miss path.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix long standing lockdep issue of using remap_pfn_range() from
the vfio-pci fault handler for mapping device MMIO. Commit
ba168b52bf ("mm: use rwsem assertion macros for mmap_lock") now
exposes this as a warning forcing this to be addressed.
remap_pfn_range() was used here to efficiently map the entire vma,
but it really never should have been used in the fault handler and
doesn't handle concurrency, which introduced complex locking. We
also needed to track vmas mapping the device memory in order to zap
those vmas when the memory is disabled resulting in a vma list.
Instead of all that mess, setup an address space on the device fd
such that we can use unmap_mapping_range() for zapping to avoid
the tracking overhead and use the standard vmf_insert_pfn() to
insert mappings on fault. For now we'll iterate the vma and
opportunistically try to insert mappings for the entire vma. This
aligns with typical use cases, but hopefully in the future we can
drop the iterative approach and make use of huge_fault instead,
once vmf_insert_pfn{pud,pmd}() learn to handle pfnmaps.
(Alex Williamson)
-----BEGIN PGP SIGNATURE-----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=bSXX
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.10-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
"Fix long standing lockdep issue of using remap_pfn_range() from the
vfio-pci fault handler for mapping device MMIO. Commit ba168b52bf
("mm: use rwsem assertion macros for mmap_lock") now exposes this as a
warning forcing this to be addressed.
remap_pfn_range() was used here to efficiently map the entire vma, but
it really never should have been used in the fault handler and doesn't
handle concurrency, which introduced complex locking. We also needed
to track vmas mapping the device memory in order to zap those vmas
when the memory is disabled resulting in a vma list.
Instead of all that mess, setup an address space on the device fd
such that we can use unmap_mapping_range() for zapping to avoid the
tracking overhead and use the standard vmf_insert_pfn() to insert
mappings on fault.
For now we'll iterate the vma and opportunistically try to insert
mappings for the entire vma. This aligns with typical use cases, but
hopefully in the future we can drop the iterative approach and make
use of huge_fault instead, once vmf_insert_pfn{pud,pmd}() learn to
handle pfnmaps"
* tag 'vfio-v6.10-rc4' of https://github.com/awilliam/linux-vfio:
vfio/pci: Insert full vma on mmap'd MMIO fault
vfio/pci: Use unmap_mapping_range()
vfio: Create vfio_fs_type with inode per device
The Realtek RTL8224 PHY is a 2.5Gbps capable PHY. It only uses the
clause 45 MDIO interface and can leverage the support that has already
been added for the other 822x PHYs.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20240611053415.2111723-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the runtime tests of hardened usercopy to standard KUnit tests.
Additionally disable usercopy_test_invalid() for systems with separate
address spaces (or no MMU) since it's not sensible to test for address
confusion there (e.g. m68k).
Co-developed-by: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Link: https://lore.kernel.org/r/20200721174654.72132-1-vitor@massaru.org
Tested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
For tests that need to allocate using vm_mmap() (e.g. usercopy and
execve), provide the interface to have the allocation tracked by KUnit
itself. This requires bringing up a placeholder userspace mm.
This combines my earlier attempt at this with Mark Rutland's version[1].
Normally alloc_mm() and arch_pick_mmap_layout() aren't exported for
modules, so export these only for KUnit testing.
Link: https://lore.kernel.org/lkml/20230321122514.1743889-2-mark.rutland@arm.com/ [1]
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 12c2d0a5b8 ("net: lan966x: add ethtool configuration and statistics")
added support for various standard stats. We should not clear the stats
which are not collected by the device. Core code uses a special
initializer to detect when device does not report given stat.
Acked-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240613003222.3327368-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-EINVAL will interrupt the dump. The correct error to return
if we have more data to dump is -EMSGSIZE.
Discovered by doing:
for i in `seq 80`; do ip link add type veth; done
./cli.py --dbg-small-recv 5300 --spec netdev.yaml --dump dev-get >> /dev/null
[...]
nl_len = 64 (48) nl_flags = 0x0 nl_type = 19
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
error: -22
Fixes: d3d854fd6a ("netdev-genl: create a simple family for netdev stuff")
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240613213044.3675745-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZmykPwAKCRDbK58LschI
g7LOAQDVPkJ9k50/xrWIBtgvkGq1jCrMlpwEh49QYO0xoqh1IgEA+6Xje9jCIsdp
AHz9WmZ6G0EpTuDgFq50K1NVZ7MgSQE=
=zKfv
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-14
We've added 8 non-merge commits during the last 2 day(s) which contain
a total of 9 files changed, 92 insertions(+), 11 deletions(-).
The main changes are:
1) Silence a syzkaller splat under CONFIG_DEBUG_NET=y in pskb_pull_reason()
triggered via __bpf_try_make_writable(), from Florian Westphal.
2) Fix removal of kfuncs during linking phase which then throws a kernel
build warning via resolve_btfids about unresolved symbols,
from Tony Ambardar.
3) Fix a UML x86_64 compilation failure from BPF as pcpu_hot symbol
is not available on User Mode Linux, from Maciej Żenczykowski.
4) Fix a register corruption in reg_set_min_max triggering an invariant
violation in BPF verifier, from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Harden __bpf_kfunc tag against linker kfunc removal
compiler_types.h: Define __retain for __attribute__((__retain__))
bpf: Avoid splat in pskb_pull_reason
bpf: fix UML x86_64 compile failure
selftests/bpf: Add test coverage for reg_set_min_max handling
bpf: Reduce stack consumption in check_stack_write_fixed_off
bpf: Fix reg_set_min_max corruption of fake_reg
MAINTAINERS: mailmap: Update Stanislav's email address
====================
Link: https://lore.kernel.org/r/20240614203223.26500-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Rust block layer API was using the old queue limit API, which was just
removed. Use the new API instead.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Fixes: 3253aba340 ("rust: block: introduce `kernel::block::mq` module")
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20240614235350.621121-1-nmi@metaspace.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Disconnecting an external display triggers a hypervisor reset on the
Lenovo ThinkPad X13s since 6.10-rc1 which enabled UCSI. Disable it again
until the regression has been fixed properly.
Fixes: 3f91a0bf4a ("soc: qcom: pmic_glink: reenable UCSI on sc8280xp")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240608114529.23060-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Helper xe_uc_fw_sanitize() was defined but never used. First fix
it by properly exiting also from the LOAD_FAIL state, then use it
in GuC and HuC sanitize code.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240613153424.2120-1-michal.wajdeczko@intel.com
We don't support changing CCS mode when running in SR-IOV mode yet.
When running as a PF driver just apply default ccs_mode=1 that VF
drivers will assume as already applied and fixed.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240614101415.2208-1-michal.wajdeczko@intel.com
drm-misc-fixes for v6.10-rc4:
- Kconfig fix for WERROR.
- Add panel quirk for Aya Neo KUN
- Small bugfixes in komeda, bridge/panel, amdgpu, nouveau.
- Remove unused nouveau struct.
- Call drm_atomic_helper_shutdown for shmobile and mediatek on shutdown.
- Remove DEBUGFS ifdefs from komeda.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/941c0552-3614-4af1-b04a-0a62c99fd7fb@linux.intel.com
Move it out of the xe_migrate compilation unit so it can be re-used in
other places.
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240614094433.775866-1-francois.dugast@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that the layout of the structures is compatible with 1.1 it is time
to probe the 1.1 version of the FF-A protocol inside the hypervisor. If
the TEE doesn't support it, it should return the minimum supported
version.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240613132035.1070360-5-sebastianene@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The FF-A spec 1.2 reserves the following ranges for identifying FF-A
calls:
0x84000060-0x840000FF: FF-A 32-bit calls
0xC4000060-0xC40000FF: FF-A 64-bit calls.
Use the range identification according to the spec and allow calls that
are currently out of the range(eg. FFA_MSG_SEND_DIRECT_REQ2) to be
identified correctly.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240613132035.1070360-4-sebastianene@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Handle the FFA_PARTITION_INFO_GET host call inside the pKVM hypervisor
and copy the response message back to the host buffers.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240613132035.1070360-3-sebastianene@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The pKVM hypervisor initializes with FF-A version 1.0. The spec requires
that no other FF-A calls to be issued before the version negotiation
phase is complete. Split the hypervisor proxy initialization code in two
parts so that we can move the later one after the host negotiates its
version.
Without trapping the call, the host drivers can negotiate a higher
version number with TEE which can result in a different memory layout
described during the memory sharing calls.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240613132035.1070360-2-sebastianene@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The Fine Grained Trap extension is pretty messy as it doesn't
consistently use the same polarity for all trap bits. A bunch
of them, added later in the life of the architecture, have a
*negative* priority.
So if these bits are disabled, they must be RES1 and not RES0.
But that's not what the code implements, making the traps for
these negative trap bits being always on instead of disabled.
Fix the relevant bits, and stick a brown paper bag on my head
for the rest of the day...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614125858.78361-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Callers can pass null in filter (i.e. from returned from the function
wbscl_get_filter_coeffs_16p) and a null check is added to ensure that is
not the case.
This fixes 4 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BIOS images may fail to load and null checks are added before they are
used.
This fixes 6 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
