dev_err_probe() can be used to simplify the existing code. Also it means
we get rid of the following warning which is seen whenever the PMAC
(Ethernet controller which connects to GSWIP's CPU port) has not been
probed yet:
gswip 1e108000.switch: dsa switch register failed: -517
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-5-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some dev_err are missing the terminating \n. Let's add that.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240611135434.3180973-4-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the CPU port to gswip_xrx200_phylink_get_caps() and
gswip_xrx300_phylink_get_caps(). It connects through a SoC-internal bus,
so the only allowed phy-mode is PHY_INTERFACE_MODE_INTERNAL.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240611135434.3180973-3-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the lantiq,gswip bindings to YAML format.
Also add this new file to the MAINTAINERS file.
Furthermore, the CPU port has to specify a phy-mode and either a phy or
a fixed-link. Since GSWIP is connected using a SoC internal protocol
there's no PHY involved. Add phy-mode = "internal" and a fixed-link to
the example code to describe the communication between the PMAC
(Ethernet controller) and GSWIP switch.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240611135434.3180973-2-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko says:
====================
bpf: make trusted args nullable
Current verifier checks for the arg to be nullable after checking for
certain pointer types. It prevents programs to pass NULL to kfunc args
even if they are marked as nullable. This patchset adjusts verifier and
changes bpf crypto kfuncs to allow null for IV parameter which is
optional for some ciphers. Benchmark shows ~4% improvements when there
is no need to initialise 0-sized dynptr.
v3:
- add special selftest for nullable parameters
v2:
- adjust kdoc accordingly
====================
Link: https://lore.kernel.org/r/20240613211817.1551967-1-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add special test to be sure that only __nullable BTF params can be
replaced by NULL. This patch adds fake kfuncs in bpf_testmod to
properly test different params.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240613211817.1551967-6-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adjust selftests to use nullable option for state and IV arg.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240613211817.1551967-4-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some ciphers do not require state and IV buffer, but with current
implementation 0-sized dynptr is always needed. With adjustment to
verifier we can provide NULL instead of 0-sized dynptr. Make crypto
kfuncs ready for this.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240613211817.1551967-3-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some arguments to kfuncs might be NULL in some cases. But currently it's
not possible to pass NULL to any BTF structures because the check for
the suffix is located after all type checks. Move it to earlier place
to allow nullable args.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240613211817.1551967-2-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a driver for the GPU clock controller block found on the QCM2290 SoC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-rb1_gpu-v4-3-4bc0c19da4af@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/vfb.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/macmodes.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/goldfishfb.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/kyro/kyrofb.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/via/viafb.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/matrox/matroxfb_accel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/matrox/matroxfb_DAC1064.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/matrox/matroxfb_Ti3026.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The last user of the serial_console ASCII image was removed in v2.1.115.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Helge Deller <deller@gmx.de>
As gcc-4.1 is no longer supported, the logo data can be made const
again. Hence revert commit 15e3252464 ("fbdev: work around old
compiler bug").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Helge Deller <deller@gmx.de>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Let the power supply core register the attribute.
This ensures that the attribute is created before the device is
announced to userspace, avoiding a race condition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Let the power supply core register the attribute.
This ensures that the attribute is created before the device is
announced to userspace, avoid a race condition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
sysfs_emit validates assumptions made by sysfs and is the correct
mechanism to format data for sysfs.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The arrays are never modified, make them const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The arrays are never modified, make them const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The array is never modified, make it const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's easier to understand the nature of a data type when
it's written explicitly. With that, replace open coded
endianess conversion.
As a side effect it fixes the returned value of
intel_crc_pmic_update_aux() since ACPI PMIC core code
expects negative or zero and never uses positive one.
While at it, use macros from bits.h to reduce a room for mistake.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since we have a device pointer in the regmap, use it for
error messages.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's better to use sizeof() of a given buffer than spreading
a hard coded value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The comment that scsi_static_device_list would go away was added more than
18 years ago. Today, that list is still there and a large number of
additional entries have been added. This shows that this comment is
incorrect. Hence fix that comment.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240612171522.2677600-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The header file acpi/acpi_numa.h is included whether CONFIG_ACPI is
defined or not.
Include it only once before the #ifdef/#else/#endif preprocessor
directives and fix the following make includecheck warning:
acpi/acpi_numa.h is included more than once
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Expose the CPPC guaranteed performance as reported by the platform through
GuaranteedPerformanceRegister.
The current value is already read in cppc_get_perf_caps() and stored in
struct cppc_perf_caps (to be used by the intel_pstate driver), so only the
attribute itself needs to be defined.
Signed-off-by: Petr Tesařík <ptesarik@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To improve the readability of the code via replacing the magic number
"1" with ACCESS_COORDINATE_CPU when appropriate. No functionality
change.
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/acpi/acpi_tad.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/acpi/platform_profile.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI specification says that if no action was performed when
processing the _PUR object, _OST should still be evaluated, albeit
with a different status code.
Evaluate _OST even when evaluating _PUR fails, to signal the firmware
that no action was performed.
Compile-tested only.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This function wants to move a subset of a list from one element to the
tail into another list. It also needs to use the srcu synchronize
instead of the regular rcu version. Do this one element at a time
because that's the only to do it.
Fixes: be647e2c76 ("nvme: use srcu for iterating namespace list")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
If inc_block_group_ro systematically fails (e.g. due to ETXTBUSY from
swap) or btrfs_relocate_chunk systematically fails (from lack of
space), then this worker becomes an infinite loop.
At the very least, this strands the cleaner thread, but can also result
in hung tasks/RCU stalls on PREEMPT_NONE kernels and if the
reclaim_bgs_lock mutex is not contended.
I believe the best long term fix is to manage reclaim via work queue,
where we queue up a relocation on the triggering condition and re-queue
on failure. In the meantime, this is an easy fix to apply to avoid the
immediate pain.
Fixes: 7e27180994 ("btrfs: reinsert BGs failed to reclaim")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The IS_SRIOV macro returns true also when we are running as a PF
driver. Use correct IS_SRIOV_VF macro to skip force-wake management.
Fixes: 513ea833c2 ("drm/xe/vf: Ignore force-wake requests if VF")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240613120749.2032-1-michal.wajdeczko@intel.com
Add a connector debugfs entry to force retrain an active link. This can
be used to test both custom link parameters (previously forced via the
force_link_rate/lane_count entries) or link train failure scenarios
(previously forced via the force_link_training_failure entry). The entry
will autoreset after the link-retrain is complete.
v2: Add the entry from intel_dp_link_training.c (Jani)
v3: Lock connection_mutex only for the required intel_dp state. (Ville)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-21-imre.deak@intel.com
Add a connector debugfs entry to force a failure during the following
1-2 link training. The entry will auto-reset after the specified link
training events are complete.
v2: Add the entry from intel_dp_link_training.c (Jani)
v3: Lock connection_mutex only for the required intel_dp state. (Ville)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-20-imre.deak@intel.com
Add connector debugfs entries to get the maximum link rate and lane
count.
v2: Lock connection_mutex only for the required intel_dp state. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-19-imre.deak@intel.com
