Like other print functions, make disasm_line__write() return the number
of printed characters. It'll be used to skip unnecessary operations
when the screen is full.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250816031635.25318-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The width is updated after each part is printed. It can skip the output
processing if the total printed size is bigger than the width.
No function changes intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250816031635.25318-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be used for data type display later.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250816031635.25318-5-namhyung@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Get rid of the internal function and convert function arguments into
local variables if they are used more than once.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250816031635.25318-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The start field is to control whether the output shows full address or
offset from the function start. But actually it can be changed
dynamically in annotation__toggle_full_addr(). The informaiton should
be available through struct annotation. Let's use it directly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250816031635.25318-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are three different but similar functions for annotation on TUI.
Rename it to __hist_entry__tui_annotate() and make sure it passes 'he'.
It's not used for now but it'll be needed for later use.
Also remove map_symbol__tui_annotate() which was a simple wrapper.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250816031635.25318-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change the 'ret' variable from unsigned int to int to store negative error
codes or zero returned by regmap_field_read() and regmap_read(), and change
'-1' to 'negative errno' in the comments.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250828150702.193288-1-rongqianfeng@vivo.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The pkey ioctl PKEY_CLR2SECK2 describes in the pkey.h header file
the parameter 'keygenflags' which is forwarded to the handler
functions which actually deal with the clear key to secure key
operation. The ep11 handler module function ep11_clr2keyblob()
function receives this parameter but does not forward it to the
underlying function ep11_unwrapkey() on invocation. So in the end
the user of this ioctl could not forward additional key generation
flags to the ep11 implementation and thus was unable to modify the
key generation process in any way. So now call ep11_unwrapkey()
with the real keygenflags instead of 0 and thus the user of this
ioctl can for example via keygenflags provide valid combinations
of XCP_BLOB_* flags.
Suggested-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Introduce a common boot_panic() helper macro, and use it to
get rid of three more or less identical implementations.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
There are two distinct callers of snp_cpuid(): the MSR protocol and the GHCB
page based interface.
The snp_cpuid() logic does not care about the distinction, which only matters
at a lower level. But the fact that it supports both interfaces means that the
GHCB page based logic is pulled into the early startup code where PA to VA
conversions are problematic, given that it runs from the 1:1 mapping of memory.
So keep snp_cpuid() itself in the startup code, but factor out the hypervisor
calls via a callback, so that the GHCB page handling can be moved out.
Code refactoring only - no functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/20250828102202.1849035-25-ardb+git@google.com
Deny all sampling event by the CPUMF counter facility device driver
and return -ENOENT. This return value is used to try other PMUs.
Up to now events for type PERF_TYPE_HARDWARE were not tested for
sampling and returned later on -EOPNOTSUPP. This ends the search
for alternative PMUs. Change that behavior and try other PMUs
instead.
Fixes: 613a41b0d1 ("s390/cpum_cf: Reject request for sampling in event initialization")
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Each PAI PMU device driver returns -EINVAL when an event is out of
its accepted range. This return value aborts the search for an
alternative PMU device driver to handle this event.
Change the return value to -ENOENT. This return value is used to
try other PMUs instead. This makes the PMUs more robust when
the sequence of PMU device driver initialization changes (at boot time)
or by using modules.
Fixes: 39d62336f5 ("s390/pai: add support for cryptography counters")
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The fwnode.h is not supposed to be used by the drivers as it
has the definitions for the core parts for different device
property provider implementations. Drop it.
Note, that fwnode API for drivers is provided in property.h
which is included here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20250826132734.278226-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct kernel-doc formatting issues in the UAPI definitions for
madvise and VMA query interfaces to resolve docutils warnings during
documentation build.
Fixes: 418807860e ("drm/xe/uapi: Add UAPI for querying VMA count and memory attributes")
Fixes: 231bb0ee7a ("drm/xe/uapi: Add madvise interface")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250828071516.3838110-1-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Change the 'ret' variable from unsigned int to int to store negative error
codes or zero returned by regmap_field_write().
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Message-ID: <20250828075406.386208-4-rongqianfeng@vivo.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the 'ret' variable from unsigned int to int to store negative error
codes or zero returned by regmap_update_bits().
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Message-ID: <20250828075406.386208-3-rongqianfeng@vivo.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the 'ret' variable from u32 to int to store negative error codes
directly or returned by other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Message-ID: <20250828075406.386208-2-rongqianfeng@vivo.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Message-ID: <20250828122737.43488-1-liaoyuanhong@vivo.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new command line option --no_ublk_fixed_fd that excludes the ublk
control device (/dev/ublkcN) from io_uring's registered files array.
When this option is used, only backing files are registered starting
from index 1, while the ublk control device is accessed using its raw
file descriptor.
Add ublk_get_registered_fd() helper function that returns the appropriate
file descriptor for use with io_uring operations.
Key optimizations implemented:
- Cache UBLKS_Q_NO_UBLK_FIXED_FD flag in ublk_queue.flags to avoid
reading dev->no_ublk_fixed_fd in fast path
- Cache ublk char device fd in ublk_queue.ublk_fd for fast access
- Update ublk_get_registered_fd() to use ublk_queue * parameter
- Update io_uring_prep_buf_register/unregister() to use ublk_queue *
- Replace ublk_device * access with ublk_queue * access in fast paths
Also pass --no_ublk_fixed_fd to test_stress_04.sh for covering
plain ublk char device mode.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250827121602.2619736-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When running test_stress_04.sh, the following warning is triggered:
WARNING: CPU: 1 PID: 135 at drivers/block/ublk_drv.c:1933 ublk_ch_release+0x423/0x4b0 [ublk_drv]
This happens when the daemon is abruptly killed:
- some references may still be held, because registering IO buffer
doesn't grab ublk char device reference
OR
- io->task_registered_buffers won't be cleared because io buffer is
released from non-daemon context
For zero-copy and auto buffer register modes, I/O reference crosses
syscalls, so IO reference may not be dropped naturally when ublk server is
killed abruptly. However, when releasing io_uring context, it is guaranteed
that the reference is dropped finally, see io_sqe_buffers_unregister() from
io_ring_ctx_free().
Fix this by adding ublk_drain_io_references() that:
- Waits for active I/O references dropped in async way by scheduling
work function, for avoiding ublk dev and io_uring file's release
dependency
- Reinitializes io->ref and io->task_registered_buffers to clean state
This ensures the reference count state is clean when ublk_queue_reinit()
is called, preventing the warning and potential use-after-free.
Fixes: 1f6540e2aa ("ublk: zc register/unregister bvec")
Fixes: 1ceeedb597 ("ublk: optimize UBLK_IO_UNREGISTER_IO_BUF on daemon task")
Fixes: 8a8fe42d76 ("ublk: optimize UBLK_IO_REGISTER_IO_BUF on daemon task")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250827121602.2619736-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To allow initialization of nvm during early probe for future usecases,
use root tile instead of root gt to access mmios, as gt is not
yet initialized at early probe.
v2: fix commit message (Lucas)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250825103537.2551837-1-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
`FromBytes::from_bytes` comes with a few practical limitations:
- It requires the bytes slice to have the same alignment as the returned
type, which might not be guaranteed in the case of a byte stream,
- It returns a reference, requiring the returned type to implement
`Clone` if one wants to keep the value for longer than the lifetime of
the slice.
To overcome these when needed, add a `from_bytes_copy` with a default
implementation in the trait. `from_bytes_copy` returns an owned value
that is populated using an unaligned read, removing the lifetime
constraint and making it usable even on non-aligned byte slices.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250826-nova_firmware-v2-1-93566252fe3a@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Alexander Duyck says:
====================
fbnic: Synchronize address handling with BMC
The fbnic driver needs to communicate with the BMC if it is operating on
the RMII-based transport (RBT) of the same port the host is on. To enable
this we need to add rules that will route BMC traffic to the RBT/BMC and
the BMC and firmware need to configure rules on the RBT side of the
interface to route traffic from the BMC to the host instead of the MAC.
To enable that this patch set addresses two issues. First it will cause the
TCAM to be reconfigured in the event that the BMC was not previously
present when the driver was loaded, but the FW sends a notification that
the FW capabilities have changed and a BMC w/ various MAC addresses is now
present. Second it adds support for sending a message to the firmware so
that if the host adds additional MAC addresses the FW can be made aware and
route traffic for those addresses from the RBT to the host instead of the
MAC.
====================
Link: https://patch.msgid.link/175623715978.2246365.7798520806218461199.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MACDA TCAM can only be accessed by one entity at a time and as such we
cannot have simultaneous reads from the firmware to probe for changes from
the host. As such we have to send a message indicating what the state of
the MACDA is to the firmware when we updated it so that the firmware can
sync up the TCAMs it owns to route BMC packets to the host.
To support that we are adding a new message that is invoked when we write
the MACDA that will notify the firmware of updates from the host and allow
it to sync up the TCAM configuration to match the one on the host side.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/175623750782.2246365.9178255870985916357.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The BMC itself can decide to abandon a link and move onto another link in
the event of things such as a link flap. As a result the driver may load
with the BMC not present, and then needs to update things to support the
BMC being present while the link is up and the NIC is passing traffic.
To support this we add support to the watchdog to reinitialize the RPC to
support adding the BMC unicast, multicast, and multicast promiscuous
filters while the link is up and the NIC owns the link.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/175623750101.2246365.8518307324797058580.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To make the __fbnic_set_rx_mode and __fbnic_clear_rx_mode calls usable by
more points in the code we can make to that they expect a fbnic_dev pointer
instead of a netdev pointer.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/175623749436.2246365.6068665520216196789.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order for us to support the BMC possibly connecting, disconnecting, and
then reconnecting we need to be able to support entities outside of just
the NIC setting up promiscuous mode as the BMC can use a multicast
promiscuous setup.
To support that we should move the promisc_sync code out of the netdev and
into the RPC section of the driver so that it is reachable from more paths.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/175623748769.2246365.2130394904175851458.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add driver extension for Synopsys DesignWare DPTX IP used
on Rockchip RK3588 SoC.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Dmitry Baryshkov <lumag@kernel.org>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250822063959.692098-4-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The DW DP TX Controller is compliant with the DisplayPort Specification
Version 1.4 with the following features:
* DisplayPort 1.4a
* Main Link: 1/2/4 lanes
* Main Link Support 1.62Gbps, 2.7Gbps, 5.4Gbps and 8.1Gbps
* AUX channel 1Mbps
* Single Stream Transport(SST)
* Multistream Transport (MST)
* Type-C support (alternate mode)
* HDCP 2.2, HDCP 1.3
* Supports up to 8/10 bits per color component
* Supports RBG, YCbCr4:4:4, YCbCr4:2:2, YCbCr4:2:0
* Pixel clock up to 594MHz
* I2S, SPDIF audio interface
Add library with common helpers to make it can be shared with
other SoC.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250822063959.692098-3-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The Rockchip RK3588 SoC integrates the Synopsys DesignWare DPTX
controller. And this DPTX controller need share a USBDP PHY with
the USB 3.0 OTG controller during operation.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250822063959.692098-2-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Piotr Kubik says:
====================
Add Si3474 PSE controller driver
From: Piotr Kubik <piotr.kubik@adtran.com>
These patch series provide support for Skyworks Si3474 I2C Power
Sourcing Equipment controller.
Based on the TPS23881 driver code.
Supported features of Si3474:
- get port status,
- get port power,
- get port voltage,
- enable/disable port power
Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
====================
Link: https://patch.msgid.link/6af537dc-8a52-4710-8a18-dcfbb911cf23@adtran.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a driver for the Skyworks Si3474 I2C Power Sourcing Equipment
controller.
Driver supports basic features of Si3474 IC:
- get port status,
- get port power,
- get port voltage,
- enable/disable port power.
Only 4p configurations are supported at this moment.
Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/9b72c8cd-c8d3-4053-9c80-671b9481d166@adtran.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the Si3474 I2C Power Sourcing Equipment controller device tree
bindings documentation.
Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/71a67c6f-6fce-49c7-96ec-554602dbd4f1@adtran.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Having setup time 0 violates tAR, tCLR of some chips, for instance
TOSHIBA TC58NVG2S3ETAI0 cannot be detected successfully (first ID byte
being read duplicated, i.e. 98 98 dc 90 15 76 14 03 instead of
98 dc 90 15 76 ...).
Atmel Application Notes postulated 1 cycle NRD_SETUP without explanation
[1], but it looks more appropriate to just calculate setup time properly.
[1] Link: https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/ApplicationNotes/ApplicationNotes/doc6255.pdf
Cc: stable@vger.kernel.org
Fixes: f9ce2eddf1 ("mtd: nand: atmel: Add ->setup_data_interface() hooks")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Tested-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
GD5F1GM9 supports a high-speed Continuous Read (CR) mode which allows
the entire memory array to be read out by a single read command
without re-issuing the 13h “Page Read to Cache” command for every page.
Datasheet summary
Feature register B0[3] (NR bit)
1 = Normal Read (default)
0 = Continuous Read (CR)
ECC status register 7Ch
Normal read: bits [3:0] → ECC status of last page
Continuous read: bits [7:4] → accumulated max bit-flips over the
whole sequential read operation.
Datasheet:
https://github.com/WT-886/DATASHEET/blob/main/GD5F1GM9-v1.0.pdf
Signed-off-by: Teng Wu <gigadevice2025@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In case OOB write is requested during a data write, ECC is currently
lost. Avoid this issue by only writing in the free spare area.
This issue has been seen with a YAFFS2 file system.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: stable@vger.kernel.org
Fixes: 2cd457f328 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Since commit ddaad4ad77 ("mtd: nand: qpic_common: prevent out of
bounds access of BAM arrays"), the {cmd,data}_sgl_nitems members in
the 'bam_transaction' structure are containing the number of elements
in the cmd/data scatter-gather lists.
Change the qcom_clear_bam_transaction() function to use these numbers
while reinitializing the sg lists instead of recomputing the number of
elements to make it less error prone.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
A bunch of definitions in the 'nand-qpic-common.h' header became
unused after the conversion of the 'qcom_nandc' and 'spi-qpic-snand'
drivers to use the FIELD_PREP() macro, so remove those.
No functional changes.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
If a ma35_nand_chip_init() call fails, then a reference to 'nand_np' still
needs to be released.
Use for_each_child_of_node_scoped() to fix the issue.
Fixes: 5abb5d414d ("mtd: rawnand: nuvoton: add new driver for the Nuvoton MA35 SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Intel Discrete Graphics non-volatile memory is only present on Intel
discrete graphics devices, and its auxiliary device is instantiated by
the Intel i915 and Xe2 DRM drivers. Hence add dependencies on DRM_I915
and DRM_XE, to prevent asking the user about this driver when
configuring a kernel without Intel graphics support.
Fixes: ceb5ab3cb6 ("mtd: add driver for intel graphics non-volatile memory device")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Use the direct I/O alignment reporting from ->getattr instead of
reimplementing it. This exposes the relaxation of the memory
alignment in the XFS_IOC_DIOINFO info and ensure the information will
stay in sync. Note that randholes.c in xfstests has a bug where it
incorrectly fails when the required memory alignment is smaller than the
pointer size. Round up the reported value as there is a fair chance that
this code got copied into various applications.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
XFS does't have file attributes manipulation ioctls for special
files. Changing or reading file attributes is rejected for them in
xfs_fileattr_*et().
In XFS, this is necessary to work for project quota directories.
When project is set up, xfs_quota opens and calls FS_IOC_SETFSXATTR on
every inode in the directory. However, special files are skipped due to
open() returning a special inode for them. So, they don't even get to
this check.
The recently added file_getattr/file_setattr will call xfs_fileattr_*et,
on special files. This patch allows reading/changing file attributes on
special files.
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
As there are now file_getattr() and file_setattr(), xfs_quota will
call them on special files. These new syscalls call ->fileattr_get/set.
Symlink inodes don't have callbacks to set file attributes. This
patch adds them. The attribute values combinations are checked in
fileattr_set_prepare().
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Special file inodes cannot have project ID set from userspace and
are skipped during initial project setup. Those inodes are left
project-less in the project directory. New inodes created after
project initialization do have an ID. Creating hard links or
renaming those project-less inodes then fails on different ID check.
In commit e23d7e82b7 ("xfs: allow cross-linking special files
without project quota"), we relaxed the project id checks to
allow hardlinking special files with differing project ids since the
projid cannot be changed. Apply the same workaround for renaming
operations.
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
As documented in the PinephonePro-Schematic-V1.0-20211127.pdf,
page 11, the SPI Flash's VCC pin is connected to VCC_1V8 power
source. This fixes the following warning:
spi-nor spi1.0: supply vcc not found, using dummy regulator
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ondřej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20250827143501.1646163-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
