Replace fastops with C based stubs. There are a bunch of problems with
the current fastop infrastructure, most all related to their special
calling convention, which bypasses the normal C-ABI.
There are two immediate problems with this at present:
- it relies on RET preserving EFLAGS; whereas C-ABI does not.
- it circumvents compiler based control-flow-integrity checking
because its all asm magic.
The first is a problem for some mitigations where the
x86_indirect_return_thunk needs to include non-trivial work that
clobbers EFLAGS (eg. the Skylake call depth tracking thing).
The second is a problem because it presents a 'naked' indirect call on
kCFI builds, making it a prime target for control flow hijacking.
Additionally, given that a large chunk of virtual machine performance
relies on absolutely avoiding vmexit these days, this emulation stuff
just isn't that critical for performance anymore.
As such, replace the fastop calls with normal C functions using the
'execute' member.
As noted by Paolo: this code was performance critical for pre-Westmere
(2010) and only when running big real mode code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lkml.kernel.org/r/20250714103439.773781574@infradead.org
Current test_cc() uses the fastop infrastructure to test flags using
SETcc instructions. However, int3_emulate_jcc() already fully
implements the flags->CC mapping, use that.
Removes a pile of gnarly asm.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lkml.kernel.org/r/20250714103439.637049932@infradead.org
Use min_t() to reduce the code in fsl_lpspi_setup_transfer() and
improve its readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250815082118.586422-2-rongqianfeng@vivo.com
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge all of Documentation/devicetree/bindings/trigger-source/* as a
single entry.
In the previous merge cycle, there was a merge conflict between the IIO
and SPI trees and we ended up with the current state, but the intention
was to have a single entry for all trigger-source bindings.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250815-spi-offload-trigger-followup-v1-1-8ec5413a8383@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace calls of 'devm_kzalloc(dev, count * sizeof([type]), flags)'
with 'devm_kcalloc(dev, count, sizeof([type]), flags)' in
setup_feedback_loop() for safer memory allocation with built-in
overflow protection.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250817142327.174531-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Word 'component' is commonly used in ASoC when referring to any
component, regardless if it is a platform-type or codec-type component.
Reword all avs_xxx_platform_register() to match the scheme present in
ASoC's core. In case of avs_soc_component_register(), the name is
simplified.
Summary:
- avs_xxx_platform_register() -> avs_register_xxx_component()
- avs_soc_component_register() -> avs_register_component()
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250818104126.526442-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By sharing 'name' directly, tearing down components may lead to
use-after-free errors. Duplicate the name to avoid that.
At the same time, update the order of operations - since commit
cee28113db ("ASoC: dmaengine_pcm: Allow passing component name via
config") the framework does not override component->name if set before
invoking the initializer.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250818104126.526442-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'probe' machine board is not a typical one, it serves debug purpose
only and does not expect any kind of topology. The topology descriptor
pointer (acomp->tplg) is the only reason an avs-driver component would
utilize the pcm.c helpers and be described by a 'struct
avs_soc_component' instance rather than 'struct snd_soc_component' one.
Cut the line linking probes.c with pcm.h to avoid confusing readers.
And with that link gone, constify the component-driver again.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250818104126.526442-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make it clear what is part of debug functionality and what is not by
separating debug symbols away from the common header file.
Apart from changing avs_probe_platform_register() to return -ENOTSUPP
when CONFIG_DEBUG_FS is disabled, status quo is achieved.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250818104126.526442-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This part might not be needed for resubmission as it was already
accepted on the previous submission of this patch, but since the whole
series was not accepted due to that I had retained and expanded the
initialization in the probe routine I'm not sure if I should submit
it again.
Signed-off-by: Shimrra Shai <shimrrashai@gmail.com>
Link: https://patch.msgid.link/20250815042023.115485-4-shimrrashai@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove initialization of the DAC and mixer enablement bits from the
es8323_probe routine. This really should be handled by the DAPM
subsystem.
Signed-off-by: Shimrra Shai <shimrrashai@gmail.com>
Link: https://patch.msgid.link/20250815042023.115485-2-shimrrashai@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With module test, there is error dump:
------------[ cut here ]------------
notifier callback pca9450_i2c_restart_handler already registered
WARNING: kernel/notifier.c:23 at notifier_chain_register+0x5c/0x88,
CPU#0: kworker/u16:3/50
Call trace:
notifier_chain_register+0x5c/0x88 (P)
atomic_notifier_chain_register+0x30/0x58
register_restart_handler+0x1c/0x28
pca9450_i2c_probe+0x418/0x538
i2c_device_probe+0x220/0x3d0
really_probe+0x114/0x410
__driver_probe_device+0xa0/0x150
driver_probe_device+0x40/0x114
__device_attach_driver+0xd4/0x12c
So use devm_register_sys_off_handler to let kernel handle the resource
free to avoid kernel dump.
Fixes: 6157e62b07 ("regulator: pca9450: Add restart handler")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250815-pca9450-v1-1-7748e362dc97@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use ARRAY_SIZE() macro while calculating size of an array to improve
code readability and reduce potential sizing errors.
Implement this suggestion given by spatch tool by running
coccinelle script - scripts/coccinelle/misc/array_size.cocci
Follow ARRAY_SIZE() macro usage pattern in ublk.c introduced by,
commit ec12009318 ("selftests: ublk: fix ublk_find_tgt()")
wherever appropriate to maintain consistency.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/aKGihYui6/Pcijbk@bhairav-test.ee.iitb.ac.in
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 9d23967b18 ("ovl: simplify an error path in
ovl_copy_up_workdir()") introduced the helper ovl_cleanup_unlocked(),
which is later used in several following patches to re-acquire the parent
inode lock and unlink a dentry that was earlier found using lookup.
This helper was eventually renamed to ovl_cleanup().
The helper ovl_parent_lock() is used to re-acquire the parent inode lock.
After acquiring the parent inode lock, the helper verifies that the
dentry has not since been moved to another parent, but it failed to
verify that the dentry wasn't unlinked from the parent.
This means that now every call to ovl_cleanup() could potentially
race with another thread, unlinking the dentry to be cleaned up
underneath overlayfs and trigger a vfs assertion.
Reported-by: syzbot+ec9fab8b7f0386b98a17@syzkaller.appspotmail.com
Tested-by: syzbot+ec9fab8b7f0386b98a17@syzkaller.appspotmail.com
Fixes: 9d23967b18 ("ovl: simplify an error path in ovl_copy_up_workdir()")
Suggested-by: NeilBrown <neil@brown.name>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
ovl_create_temp() treats "workdir" as a parent in which it creates an
object so it should use I_MUTEX_PARENT.
Prior to the commit identified below the lock was taken by the caller
which sometimes used I_MUTEX_PARENT and sometimes used I_MUTEX_NORMAL.
The use of I_MUTEX_NORMAL was incorrect but unfortunately copied into
ovl_create_temp().
Note to backporters: This patch only applies after the last Fixes given
below (post v6.16). To fix the bug in v6.7 and later the
inode_lock() call in ovl_copy_up_workdir() needs to nest using
I_MUTEX_PARENT.
Link: https://lore.kernel.org/all/67a72070.050a0220.3d72c.0022.GAE@google.com/
Cc: stable@vger.kernel.org
Reported-by: syzbot+7836a68852a10ec3d790@syzkaller.appspotmail.com
Tested-by: syzbot+7836a68852a10ec3d790@syzkaller.appspotmail.com
Fixes: c63e56a4a6 ("ovl: do not open/llseek lower file with upper sb_writers held")
Fixes: d2c995581c ("ovl: Call ovl_create_temp() without lock held.")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Add driver for the Qualcomm interconnect buses found in glymur
based platforms. The topology consists of several NoCs that are
controlled by a remote processor that collects the aggregated
bandwidth for each master-slave pairs.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250814-glymur-icc-v2-3-596cca6b6015@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Update the MAX_PORTS value to 4 to program four QoS ports
available on the Glymur SoC's interconnect master node.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250814-glymur-icc-v2-2-596cca6b6015@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The "p" pointer is void so sizeof(*p) is 1. The intent was to check
sizeof(*cs_desc), which is 3, instead.
Fixes: ecfd41166b ("ALSA: usb-audio: Validate UAC3 cluster segment descriptors")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aKL5kftC1qGt6lpv@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since
923f3a2b48 ("x86/resctrl: Query LLC monitoring properties once during boot")
resctrl_cpu_detect() has been moved from common CPU initialization code to
the vendor-specific BSP init helper, while Hygon didn't put that call in their
code.
This triggers a division by zero fault during early booting stage on our
machines with X86_FEATURE_CQM* supported, where get_rdt_mon_resources() tries
to calculate mon_l3_config with uninitialized boot_cpu_data.x86_cache_occ_scale.
Add the missing resctrl_cpu_detect() in the Hygon BSP init helper.
[ bp: Massage commit message. ]
Fixes: 923f3a2b48 ("x86/resctrl: Query LLC monitoring properties once during boot")
Signed-off-by: Tianxiang Peng <txpeng@tencent.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Hui Li <caelli@tencent.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/20250623093153.3016937-1-txpeng@tencent.com
The existing memstick core patch: commit 62c59a8786 ("memstick: Skip
allocating card when removing host") sets host->removing in
memstick_remove_host(),but still exists a critical time window where
memstick_check can run after host->eject is set but before removing is set.
In the rtsx_usb_ms driver, the problematic sequence is:
rtsx_usb_ms_drv_remove: memstick_check:
host->eject = true
cancel_work_sync(handle_req) if(!host->removing)
... memstick_alloc_card()
memstick_set_rw_addr()
memstick_new_req()
rtsx_usb_ms_request()
if(!host->eject)
skip schedule_work
wait_for_completion()
memstick_remove_host: [blocks indefinitely]
host->removing = true
flush_workqueue()
[block]
1. rtsx_usb_ms_drv_remove sets host->eject = true
2. cancel_work_sync(&host->handle_req) runs
3. memstick_check work may be executed here <-- danger window
4. memstick_remove_host sets removing = 1
During this window (step 3), memstick_check calls memstick_alloc_card,
which may indefinitely waiting for mrq_complete completion that will
never occur because rtsx_usb_ms_request sees eject=true and skips
scheduling work, memstick_set_rw_addr waits forever for completion.
This causes a deadlock when memstick_remove_host tries to flush_workqueue,
waiting for memstick_check to complete, while memstick_check is blocked
waiting for mrq_complete completion.
Fix this by setting removing=true at the start of rtsx_usb_ms_drv_remove,
before any work cancellation. This ensures memstick_check will see the
removing flag immediately and exit early, avoiding the deadlock.
Fixes: 62c59a8786 ("memstick: Skip allocating card when removing host")
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250804013604.1311218-1-lijiayi@kylinos.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The MODULE_LICENSE() macro is intended for drivers that can be built as
loadable modules. The binder driver is always built-in, using this macro
here is unnecessary and potentially confusing. Remove it.
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250817135034.3692902-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During SD suspend/resume without a full card rescan (when using
non-removable SD cards for rootfs), the SD card initialization may fail
after resume. This occurs because, after a host controller reset, the
card detect logic may take time to stabilize due to debounce logic.
Without waiting for stabilization, the host may attempt powering up the
card prematurely, leading to command timeouts during resume flow.
Add sdhci_arasan_set_power_and_bus_voltage() to wait for the card detect
stable bit before power up the card. Since the stabilization time
is not fixed, a maximum timeout of one second is used to ensure
sufficient wait time for the card detect signal to stabilize.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250730060543.1735971-1-sai.krishna.potthuri@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Due to a flaw in the hardware design, the GL9763e replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9763e
PCI config. Therefore, the replay timer timeout must be masked.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Fixes: 1ae1d2d6e5 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250731065752.450231-4-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In preparation to fix replay timer timeout, add
sdhci_gli_mask_replay_timer_timeout() function
to simplify some of the code, allowing it to be re-used.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Fixes: 1ae1d2d6e5 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250731065752.450231-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Even though it is referenced by mmc/mmc-controller.yaml it still raises
the warning:
esdhc@1560000 (fsl,ls1021a-esdhc): Unevaluated properties are not allowed ('bus-width' was unexpected)
Adding an explicit reference fixes this.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250725060152.262094-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Per the SD Host Controller Simplified Specification v4.20 §3.2.3, change
the SD card clock parameters only after first disabling the external card
clock. Doing this fixes a spurious clock pulse on Baytrail and Apollo Lake
SD controllers which otherwise breaks voltage switching with a specific
Swissbit SD card. This change is limited to Intel host controllers to
avoid an issue reported on ARM64 devices.
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: Erick Shepherd <erick.shepherd@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250724185354.815888-1-erick.shepherd@ni.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
With some new devices adding into the driver, dvc_tlv and amp_vol_tlv will
cause confusion for customers on which devices they support.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250816042741.1659-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 3-channel flash module in PMI8998 has several registers different
than the others, such as: torch_clamp. Add different register fields
for it.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250729-fix-torch-clamp-issue-v2-2-9b83816437a3@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
There is a register to clamp the flash current per LED channel when
safety timer is disabled. It needs to be updated according to the
maximum torch LED current setting to ensure the torch current won't
be clamped unexpectedly.
Fixes: 96a2e242a5 ("leds: flash: Add driver to support flash LED module in QCOM PMICs")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250729-fix-torch-clamp-issue-v2-1-9b83816437a3@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Coverity noticed that assigning value -EINVAL to 'ret' in the if
statement is useless because 'ret' is overwritten a few lines later.
However, after inspect the code, this warning reveals that we need to
return -EINVAL instead of the variable assignment. So, fix it.
Coverity-id: 1646104
Fixes: aebb5fc9a0 ("leds: max77705: Add LEDs support")
Signed-off-by: Len Bao <len.bao@gmx.us>
Link: https://lore.kernel.org/r/20250727075649.34496-1-len.bao@gmx.us
Signed-off-by: Lee Jones <lee@kernel.org>
Also add an additional and optional control register for setting the
output PWM frequency to 22kHz. The default is 3kHz and this option puts
the operational frequency outside of the audible range.
Signed-off-by: Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>
Link: https://lore.kernel.org/r/20250723-leds-is31fl3236a-v6-3-210328058625@thegoodpenguin.co.uk
Signed-off-by: Lee Jones <lee@kernel.org>
Add clock id for PCLK and PLL. These clock id will be used for
operation of CSI driver. PCLK is AXI2APB clock used for register
access. PLL clock is main clock source for CAM_CSI block.
Signed-off-by: Inbaraj E <inbaraj.e@samsung.com>
Link: https://lore.kernel.org/r/20250814140943.22531-3-inbaraj.e@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CAM_CSI block has ACLK, PCLK and PLL clocks. PCLK id is already
assigned. To use PCLK and PLL clock in driver add id macro for CAM_CSI_PLL
and CAM_CSI_PCLK.
Signed-off-by: Inbaraj E <inbaraj.e@samsung.com>
Link: https://lore.kernel.org/r/20250814140943.22531-2-inbaraj.e@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Thierry Reding <treding@nvidia.com> (tegra-vde/h264.c)
Acked-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> (alvium-csi2.c)
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com> (iris_hfi_queue.c)
Reviewed-by: Sean Young <sean@mess.org>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> (imx219.c)
Acked-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Typically HDMI to MIPI CSI-2 bridges have a pin to signal image data is
being received. On the host side this is wired to a GPIO for polling or
interrupts. This includes the Lontium HDMI to MIPI CSI-2 bridges
lt6911uxe and lt6911uxc.
The GPIO "hpd" is used already by other HDMI to CSI-2 bridges, use it
here as well.
Signed-off-by: Dongcheng Yan <dongcheng.yan@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 20244cbafb ("media: i2c: change lt6911uxe irq_gpio name to "hpd"")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
