If an error occurs after a successful iommu_paging_domain_alloc() call, it
should be undone by a corresponding iommu_domain_free() call, as already
done in the remove function.
In order to fix the issue, move the corresponding call at the end of the
function, because it is safe to allocate 'empty_domain' later.
Fixes: ff8c5622f9 ("media: rkvdec: Restore iommu addresses on errors")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The iommu_paging_domain_alloc() function doesn't return NULL on error it
returns error pointers. Update the check and then set ->empty_domain to
NULL because the rest of the driver assumes it can be NULL.
Fixes: ff8c5622f9 ("media: rkvdec: Restore iommu addresses on errors")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Genpd OF providers must now be registered after genpd bus registration.
However, cpg_mstp_add_clk_domain() is only called from CLK_OF_DECLARE(),
which is too early. Hence on R-Car M1A, R-Car H1, and RZ/A1, the
CPG/MSTP Clock Domain fails to register, and any devices residing in
that clock domain fail to probe.
Fix this by splitting initialization into two steps:
- The first part keeps on registering the PM domain with genpd at
CLK_OF_DECLARE(),
- The second and new part moves the registration of the genpd OF
provider to a postcore_initcall().
See also commit c5ae5a0c61 ("pmdomain: renesas: rcar-sysc: Add
genpd OF provider at postcore_initcall").
Fixes: 18a3a510ec ("pmdomain: core: Add the genpd->dev to the genpd provider bus")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/81ef5f8d5d31374b7852b05453c52d2f735062a2.1755073087.git.geert+renesas@glider.be
Since the Sparrow Hawk has a smaller PCB than the White Hawk, it tends
to generate more heat. To prevent potential damage to the board, adjust
the temperature trip points.
Add four "passive" trip points which increasingly throttle the CPU to
prevent overheating. The first trip point at 68°C disables the 1.8 GHz
and 1.7 GHz modes and limits the CPU to 1.5 GHz frequency. The second
trip point at 72°C disables the 1.5 GHz mode and limits the CPU to 1.0
GHz frequency. The third trip point at 76°C uses thermal-idle to start
inserting idle cycles into the CPU instruction stream to cool the CPU
cores down. The fourth and last trip point at 80°C disables the 1.0 GHz
mode and limits the CPU to 500 MHz frequency.
In case the SoC heats up further, in case either of the thermal sensors
readings passes the 100°C, a thermal shutdown is triggered to prevent
any damage to the hardware.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/20250814233529.191874-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Currently, all RZ/G2 .dtsi files configure the CANFD core clocks to 40
MHz, which limits CAN-FD data transfer rates to 4 Mbps. However, all
RZ/G2 SoCs support CANFD clock rates up to 80 MHz.
Now the R-Car CAN-FD driver has gained support for Transceiver Delay
Compensation, increase all appropriate CANFD clock rates to the
documented maximum, to support data rates up to 8 Mbps.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/0dd1c17135707587e9e9d6d68b2eaa1921fbcb7a.1755090456.git.geert+renesas@glider.be
Currently, all R-Car Gen3 .dtsi files configure the CANFD core clocks to
40 MHz, which limits CAN-FD data transfer rates to 4 Mbps. However, all
R-Car Gen3 SoCs except for R-Car D3 support CANFD clock rates up to 80
MHz.
Now the R-Car CAN-FD driver has gained support for Transceiver Delay
Compensation, increase all appropriate CANFD clock rates to the
documented maximum, to support data rates up to 8 Mbps.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/d1ca3cd184193084b6de4332d47d0aee1923f6a6.1755090456.git.geert+renesas@glider.be
The BIOS can leave the AUX power well enabled on an output, even if this
isn't required (on platforms where the AUX power is only needed for an
AUX access). This was observed at least on PTL. To avoid the WARN which
would be triggered by this during the HW readout, convert the WARN to a
debug message.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-6-imre.deak@intel.com
(cherry picked from commit 6cb52cba47)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Use the cached max lane count value on LNL+, to account for scenarios
where this value is queried after the HW cleared the corresponding pin
assignment value in the TCSS_DDI_STATUS register after the sink got
disconnected.
For consistency, follow-up changes will use the cached max lane count
value on other platforms as well and will also cache the pin assignment
value in a similar way.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-5-imre.deak@intel.com
(cherry picked from commit afc4e84388)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
On LNL+ for a disconnected sink the pin assignment value gets cleared by
the HW/FW as soon as the sink gets disconnected, even if the PHY
ownership got acquired already by the BIOS/driver (and hence the PHY
itself is still connected and used by the display). During HW readout
this can result in detecting the PHY's max lane count as 0 - matching
the above cleared aka NONE pin assignment HW state. For a connected PHY
the driver in general (outside of intel_tc.c) expects the max lane count
value to be valid for the video mode enabled on the corresponding output
(1, 2 or 4). Ensure this by setting the max lane count to 4 in this
case. Note, that it doesn't matter if this lane count happened to be
more than the max lane count with which the PHY got connected and
enabled, since the only thing the driver can do with such an output -
where the DP-alt sink is disconnected - is to disable the output.
v2: Rebased on change reading out the pin configuration only if the PHY
is connected.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-4-imre.deak@intel.com
(cherry picked from commit 33cf70bc0f)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
The PHY's pin assignment value in the TCSS_DDI_STATUS register - as set
by the HW/FW based on the connected DP-alt sink's TypeC/PD pin
assignment negotiation - gets cleared by the HW/FW on LNL+ as soon as
the sink gets disconnected, even if the PHY ownership got acquired
already by the driver (and hence the PHY itself is still connected and
used by the display). This is similar to how the PHY Ready flag gets
cleared on LNL+ in the same register.
To be able to query the max lane count value on LNL+ - which is based on
the above pin assignment - at all times even after the sink gets
disconnected, the max lane count must be determined and cached during
the PHY's HW readout and connect sequences. Do that here, leaving the
actual use of the cached value to a follow-up change.
v2: Don't read out the pin configuration if the PHY is disconnected.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-3-imre.deak@intel.com
(cherry picked from commit 3e32438fc4)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
The TypeC PHY HW readout during driver loading and system resume
determines which TypeC mode the PHY is in (legacy/DP-alt/TBT-alt) and
whether the PHY is connected, based on the PHY's Owned and Ready flags.
For the PHY to be in DP-alt or legacy mode and for the PHY to be in the
connected state in these modes, both the Owned (set by the BIOS/driver)
and the Ready (set by the HW) flags should be set.
On ICL-MTL the HW kept the PHY's Ready flag set after the driver
connected the PHY by acquiring the PHY ownership (by setting the Owned
flag), until the driver disconnected the PHY by releasing the PHY
ownership (by clearing the Owned flag). On LNL+ this has changed, in
that the HW clears the Ready flag as soon as the sink gets disconnected,
even if the PHY ownership was acquired already and hence the PHY is
being used by the display.
When inheriting the HW state from BIOS for a PHY connected in DP-alt
mode on which the sink got disconnected - i.e. in a case where the sink
was connected while BIOS/GOP was running and so the sink got enabled
connecting the PHY, but the user disconnected the sink by the time the
driver loaded - the PHY Owned but not Ready state must be accounted for
on LNL+ according to the above. Do that by assuming on LNL+ that the PHY
is connected in DP-alt mode whenever the PHY Owned flag is set,
regardless of the PHY Ready flag.
This fixes a problem on LNL+, where the PHY TypeC mode / connected state
was detected incorrectly for a DP-alt sink, which got connected and then
disconnected by the user in the above way.
v2: Rename tc_phy_in_legacy_or_dp_alt_mode() to tc_phy_owned_by_display().
(Luca, Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
[Imre: Add one-liner function documentation for tc_phy_owned_by_display()]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-2-imre.deak@intel.com
(cherry picked from commit 89f4b196ee)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
When ksmbd_conn_releasing(opinfo->conn) returns true,the refcount was not
decremented properly, causing a refcount leak that prevents the count from
reaching zero and the memory from being released.
Cc: stable@vger.kernel.org
Signed-off-by: Ziyan Xu <ziyan@securitygossip.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Update the connection tracking logic to handle both IPv4 and IPv6
address families.
Cc: stable@vger.kernel.org
Fixes: e6bb919397 ("ksmbd: limit repeated connections from clients with the same IP")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can't call destroy_workqueue(smb_direct_wq); before stop_sessions()!
Otherwise already existing connections try to use smb_direct_wq as
a NULL pointer.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
VFs without native PCIe Power Management (PM) capabilities inherit their
PF's power state as per PCIe specifications(§5.10.1 PCIe Base Spec 7.0).
Enabling Runtime Power Management (RPM) for these VFs trigger unnecessary
driver suspend/resume operations that ultimately perform no PCI-level power
transition.
Since VFs without PM capabilities cannot independently enter low-power
states, the existing RPM workflow becomes redundant:
1. Driver executes full suspend/resume sequence
2. PCI PM transition step becomes no-op
3. VF power state remains tied to PF's status
Disabling RPM for VFs eliminates this redundant processing while
maintaining proper power management through PF dependency. This
optimization ensures VFs follow their PF's power state without superfluous
runtime handling.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250812163613.9954-1-satyanarayana.k.v.p@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If VGA and DP connected together, there will be only one can get crtc.
Add encoder possible_clones to support two connectors enable.
Fixes: 3c7623fb5b ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-8-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In some case, the dp link training success at 8.1Gbps, but the sink's
maximum supported rate is less than 8.1G. So change the default 8.1Gbps
link rate to the rate that reads from devices' capabilities.
Fixes: 54063d86e0 ("drm/hisilicon/hibmc: add dp link moduel in hibmc drivers")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-6-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
When hibmc loaded failed, the driver use hibmc_unload to free the
resource, but the mutexes in mode.config are not init, which will
access an NULL pointer. Just change goto statement to return, because
hibnc_hw_init() doesn't need to free anything.
Fixes: b3df5e65cc ("drm/hibmc: Drop drm_vblank_cleanup")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-5-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The local variable is passed in request_irq (), and there will be use
after free problem, which will make request_irq failed. Using the global
irq name instead of it to fix.
Fixes: b11bc1ae46 ("drm/hisilicon/hibmc: Add MSI irq getting and requesting for HPD")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-4-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Currently the driver missed to clean the i2c adapter when vdac init failed.
It may cause resource leak.
Fixes: a0d078d06e ("drm/hisilicon: Features to support reading resolutions from EDID")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-2-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The clamp macro returns a value within the specified range.
In ad7768_set_freq(), the value returned from clamp() is checked against
zero, which is not possible since the value would always be between
50 and 1024000.
Removed the 'if' check.
This issue was reported by static coverity analyser as logically
dead code.
Signed-off-by: Chandra Mohan Sundar <chandramohan.explore@gmail.com>
Link: https://patch.msgid.link/20250816133757.98624-1-chandramohan.explore@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use min() to reduce code in inv_icm42600_buffer_update_fifo_period()
and inv_icm42600_buffer_update_watermark(), and improve readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250816120510.355835-1-rongqianfeng@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
a fallback during cpuid helpers reorg
- Initialize reserved fields in the SVSM page validation calls structure
to zero in order to allow for future structure extensions
- Have the sev-guest driver's buffers used in encryption operations be
in linear mapping space as the encryption operation can be offloaded
to an accelerator
- Have a read-only MSR write when in an AMD SNP guest trap to the
hypervisor as it is usually done. This makes the guest user experience
better by simply raising a #GP instead of terminating said guest
- Do not output AVX512 elapsed time for kernel threads because the data
is wrong and fix a NULL pointer dereferencing in the process
- Adjust the SRSO mitigation selection to the new attack vectors
-----BEGIN PGP SIGNATURE-----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=zsPJ
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove a transitional asm/cpuid.h header which was added only as a
fallback during cpuid helpers reorg
- Initialize reserved fields in the SVSM page validation calls
structure to zero in order to allow for future structure extensions
- Have the sev-guest driver's buffers used in encryption operations be
in linear mapping space as the encryption operation can be offloaded
to an accelerator
- Have a read-only MSR write when in an AMD SNP guest trap to the
hypervisor as it is usually done. This makes the guest user
experience better by simply raising a #GP instead of terminating said
guest
- Do not output AVX512 elapsed time for kernel threads because the data
is wrong and fix a NULL pointer dereferencing in the process
- Adjust the SRSO mitigation selection to the new attack vectors
* tag 'x86_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpuid: Remove transitional <asm/cpuid.h> header
x86/sev: Ensure SVSM reserved fields in a page validation entry are initialized to zero
virt: sev-guest: Satisfy linear mapping requirement in get_derived_key()
x86/sev: Improve handling of writes to intercepted TSC MSRs
x86/fpu: Fix NULL dereference in avx512_status()
x86/bugs: Select best SRSO mitigation
type of task so that they don't trigger falsely
- Use the write unsafe user access pairs when writing a futex value to prevent
an error on PowerPC which does user read and write accesses differently
-----BEGIN PGP SIGNATURE-----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=q1tX
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Make sure sanity checks down in the mutex lock path happen on the
correct type of task so that they don't trigger falsely
- Use the write unsafe user access pairs when writing a futex value to
prevent an error on PowerPC which does user read and write accesses
differently
* tag 'locking_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Fix __clear_task_blocked_on() warning from __ww_mutex_wound() path
futex: Use user_write_access_begin/_end() in futex_put_value()
The software_node_register_node_group() and
software_node_unregister_node_group() functions take in essence an
array of pointers to software_node structs. Since the functions do not
modify the array declare the argument as constant, so that static
arrays can be declared as const and annotated as __initconst.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/2zny5grbgtwbplynxffxg6dkgjgqf45aigwmgxio5stesdr3wi@gf2zamk5amic
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The minimum supported version of LLVM for building the x86 kernel
was bumped to 15.0.0 in
7861640aac ("x86/build: Raise the minimum LLVM version to 15.0.0"),
so the checks for Clang 14.0.0 and ld.lld 14.0.0 or newer will always been
true. Clean them up.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250814-x86-min-ver-cleanups-v1-6-ff7f19457523@kernel.org
After hvc_write completes, call hvc_kick also in the case the output
buffer has been drained, to ensure tty_wakeup gets called.
This fixes that functions which wait for a drained buffer got stuck
occasionally.
Cc: stable <stable@kernel.org>
Closes: https://bugzilla.opensuse.org/show_bug.cgi?id=1230062
Signed-off-by: Fabian Vogt <fvogt@suse.de>
Link: https://lore.kernel.org/r/2011735.PYKUYFuaPT@fvogt-thinkpad
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having the new tty_port_tty guard, use it in tty3270_resize(). This
makes the code easier to read. The winsize is now defined in the
scope and initialized immediately, so that it's obvious.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250814072456.182853-17-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the vt code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
A local free_page_ptr __free guard is introduced for
__get_free_page/free_page (with proper casts). This could be made public
in include/. But I am not sure if there are more possible users, so
keeping completely private here.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the 8250_rsa code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
The new __free()-annotated declarations are moved to the allocation points
as is preferred:
https://lore.kernel.org/all/CAHk-=wjvh_LUpa=864joG2JJXs3+viO-kLzLidR2JLyMr4MNwA@mail.gmail.com/
Except font_data in con_font_get(). The scope in there would not match
the expected lifetime. But the declaration is moved closer.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-15-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the 8250_rsa code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-14-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the 8250_omap code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
For this to work, UART_CAP_RPM has to be set to up->capabilities a bit
earlier.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-13-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To use guard()s easily in omap_8250_set_termios(), split it into atomic
and non-atomic part. The former can be easily guarded -- without a need
of indenting or moving code.
omap_8250_set_termios() would likely profit from a cleanup similar to
one in serial8250_do_set_termios() in commit cdc4a3e0b2 ("serial:
8250: extract serial8250_set_fcr()") and earlier.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-12-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the 8250 code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
serial_unlink_irq_chain() is done separately here because with the
guard() used, those BUG_ON()s can be switched WARN_ON()s as we can
actually handle the conditions and return (despite something went really
wrong).
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-11-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the 8250 code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-10-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the serial_core code. This
improves readability, makes error handling easier, and marks locked
portions of code explicit.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the mxser code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use scoped_guard() and reorder the function. This is done separately
from the other changes, as it is slighly more intrusive: scoped_guard()
handles the have-tty case and returns. The non-tty case is done at the
end of the function.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having all the new guards, use them in the tty_port code. This improves
readability, makes error handling easier, and marks locked portions of
code explicit.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having this, guards like these work:
guard(serial8250_rpm)(up);
or
scoped_guard(serial8250_rpm, up) {
...
}
See e.g. "serial: 8250: use guard()s" later in this series.
And make them available to anyone (EXPORT + put in 8250.h) as drivers
open code this anyway.
The _tx ones are not defined as they would have no user.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having this, guards like these work:
guard(uart_port_lock_irq)(&up->port);
or
scoped_guard(uart_port_lock_irqsave, port) {
...
}
See e.g. "serial: 8250: use guard()s" later in this series.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having this, guards like these work:
scoped_guard(tty_port_tty, port)
tty_wakeup(scoped_tty());
See e.g. "tty_port: use scoped_guard()" later in this series.
The definitions depend on CONFIG_TTY. It's due to tty_kref_put().
On !CONFIG_TTY, it is an inline and its declaration would conflict. The
guards are not needed in that case, of course.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having this, guards like these work:
guard(console_lock)();
or
scoped_guard(console_lock) {
...
}
See e.g. "vc_screen: use guard()s" later in this series.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250814072456.182853-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The text was presenting the team, the the e-mail address, then some of
the expectations, then what form of e-mail is expected. By switching
the e-mail paragraph two paragraphs later and dropping the "Contact"
sub-section, we can have a more natural flow that presents the team,
then its expectation, then how to best contribute, then where to send.
And more importantly, it increases the chances that reporters have read
the prerequisites before finding the e-mail address.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250814192730.19252-2-w@1wt.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some bug reports sent to the security team sometimes lack any explanation,
are only AI-generated without verification, or sometimes it can simply be
difficult to have a conversation with an invisible reporter belonging to
an opaque team. This fortunately remains rare but the trend has been
steadily increasing over the last years and it seems important to clarify
what developers expect from reporters to avoid frustration on any side and
keep the process efficient.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250814192730.19252-1-w@1wt.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mount options (uid, gid, mode) are silently ignored when debugfs is
mounted. This is a regression introduced during the conversion to the
new mount API.
When the mount API conversion was done, the parsed options were never
applied to the superblock when it was reused. As a result, the mount
options were ignored when debugfs was mounted.
Fix this by following the same pattern as the tracefs fix in commit
e4d32142d1 ("tracing: Fix tracefs mount options"). Call
debugfs_reconfigure() in debugfs_get_tree() to apply the mount options
to the superblock after it has been created or reused.
As an example, with the bug the "mode" mount option is ignored:
$ mount -o mode=0666 -t debugfs debugfs /tmp/debugfs_test
$ mount | grep debugfs_test
debugfs on /tmp/debugfs_test type debugfs (rw,relatime)
$ ls -ld /tmp/debugfs_test
drwx------ 25 root root 0 Aug 4 14:16 /tmp/debugfs_test
With the fix applied, it works as expected:
$ mount -o mode=0666 -t debugfs debugfs /tmp/debugfs_test
$ mount | grep debugfs_test
debugfs on /tmp/debugfs_test type debugfs (rw,relatime,mode=666)
$ ls -ld /tmp/debugfs_test
drw-rw-rw- 37 root root 0 Aug 2 17:28 /tmp/debugfs_test
Fixes: a20971c187 ("vfs: Convert debugfs to use the new mount API")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220406
Cc: stable <stable@kernel.org>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://lore.kernel.org/r/20250816-debugfs-mount-opts-v3-1-d271dad57b5b@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
