mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-04 19:54:59 +00:00
1,399,042 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Wang Liang
|
d46e51f1c7 |
net: drop UFO packets in udp_rcv_segment()
When sending a packet with virtio_net_hdr to tun device, if the gso_type in virtio_net_hdr is SKB_GSO_UDP and the gso_size is less than udphdr size, below crash may happen. ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:4572! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 62 Comm: mytest Not tainted 6.16.0-rc7 #203 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:skb_pull_rcsum+0x8e/0xa0 Code: 00 00 5b c3 cc cc cc cc 8b 93 88 00 00 00 f7 da e8 37 44 38 00 f7 d8 89 83 88 00 00 00 48 8b 83 c8 00 00 00 5b c3 cc cc cc cc <0f> 0b 0f 0b 66 66 2e 0f 1f 84 00 000 RSP: 0018:ffffc900001fba38 EFLAGS: 00000297 RAX: 0000000000000004 RBX: ffff8880040c1000 RCX: ffffc900001fb948 RDX: ffff888003e6d700 RSI: 0000000000000008 RDI: ffff88800411a062 RBP: ffff8880040c1000 R08: 0000000000000000 R09: 0000000000000001 R10: ffff888003606c00 R11: 0000000000000001 R12: 0000000000000000 R13: ffff888004060900 R14: ffff888004050000 R15: ffff888004060900 FS: 000000002406d3c0(0000) GS:ffff888084a19000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 0000000004007000 CR4: 00000000000006f0 Call Trace: <TASK> udp_queue_rcv_one_skb+0x176/0x4b0 net/ipv4/udp.c:2445 udp_queue_rcv_skb+0x155/0x1f0 net/ipv4/udp.c:2475 udp_unicast_rcv_skb+0x71/0x90 net/ipv4/udp.c:2626 __udp4_lib_rcv+0x433/0xb00 net/ipv4/udp.c:2690 ip_protocol_deliver_rcu+0xa6/0x160 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x72/0x90 net/ipv4/ip_input.c:233 ip_sublist_rcv_finish+0x5f/0x70 net/ipv4/ip_input.c:579 ip_sublist_rcv+0x122/0x1b0 net/ipv4/ip_input.c:636 ip_list_rcv+0xf7/0x130 net/ipv4/ip_input.c:670 __netif_receive_skb_list_core+0x21d/0x240 net/core/dev.c:6067 netif_receive_skb_list_internal+0x186/0x2b0 net/core/dev.c:6210 napi_complete_done+0x78/0x180 net/core/dev.c:6580 tun_get_user+0xa63/0x1120 drivers/net/tun.c:1909 tun_chr_write_iter+0x65/0xb0 drivers/net/tun.c:1984 vfs_write+0x300/0x420 fs/read_write.c:593 ksys_write+0x60/0xd0 fs/read_write.c:686 do_syscall_64+0x50/0x1c0 arch/x86/entry/syscall_64.c:63 </TASK> To trigger gso segment in udp_queue_rcv_skb(), we should also set option UDP_ENCAP_ESPINUDP to enable udp_sk(sk)->encap_rcv. When the encap_rcv hook return 1 in udp_queue_rcv_one_skb(), udp_csum_pull_header() will try to pull udphdr, but the skb size has been segmented to gso size, which leads to this crash. Previous commit |
||
Linus Torvalds
|
111857421c |
remoteproc updates for v6.17
Make the Xilinx remoteproc driver support running on only a single core, disable still unsupported remoteproc features, and stop the remoteproc on shutdown to facilitate kexec. Conclude the renaming of the Qualcomm ADSP driver to "PAS" that was started many years ago. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmiNGowVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FUYYQAKByyveRNeRaOKYcbHCLUsGwVZ5A 4JIXqIrHcIjPgcPNLvCudhz8n+Bp5pNxNEu03yDaSu5QkHz2gDEYZ83ZIvFeKiax cd3r/DtdnlHKRArJlx6un9lhi3veXOwbyE7GA6lPZ/jKz4usqbSGX3aSAeAK0g2D DiMISRMfBeHUl9cXtawL5lQSKl7GELJq2gz2+mY1mUivhplzSIgcIrQuF6w1pFNt 20Sad5jhgOm0ELMNuLY7YuWYKon56OUwjF5T0wZetpwHmvJ/vv18Z1CLwSm9iwaG T3IXLFL1ED28sdCT3cfpbxnp6S7pn1MhzNYVYN6RImlZmtAz9YW5zJrj4EwVu0Bk K4e+UC2BkechT7lOxjFL5qhsZpkUrQZXccTf3fARn0GeCBlyfjTRMp3He8wJLDx1 FemCM7OXSc2OXnAm2231BxHu2T0MRY5Z3ozPJEeg0M3hj5oaWBflctp+puOoBwBe g4VcY8yQ3qAzfts7RgyB9gjRQ8KhJ6FABmZZv2RVTtdjsH3Sa1MLB3T+PzvNW2z4 L9/t4cIvp4xMXKztJVzVsaHAPw2P/ZRIo+Xfg6AgIvZ0ebM9ZSTe2rGHX/2tE14o FWEUs7g58RE5NcJIqqyDaIfBrgvG8HQiLOf37uZDboCFV/Z4RP8Z6pHa8+YyiDvB 8LtKweBQGD/MmgcC =yhyx -----END PGP SIGNATURE----- Merge tag 'rproc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: - Make the Xilinx remoteproc driver support running on only a single core, disable still unsupported remoteproc features, and stop the remoteproc on shutdown to facilitate kexec. - Conclude the renaming of the Qualcomm ADSP driver to "PAS" that was started many years ago. * tag 'rproc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: remoteproc: xlnx: Fix kernel-doc warnings remoteproc: xlnx: Disable unsupported features remoteproc: xlnx: Add shutdown callback remoteproc: xlnx: Allow single core use in split mode dt-bindings: remoteproc: qcom,sa8775p-pas: Correct the interrupt number remoteproc: Don't use %pK through printk dt-bindings: remoteproc: qcom,sm8150-pas: Document QCS615 remoteproc remoteproc: qcom: pas: Conclude the rename from adsp |
||
Paul Chaignon
|
d8d2d9d12f |
selftests/bpf: Test for unaligned flow_dissector ctx access
This patch adds tests for two context fields where unaligned accesses were not properly rejected. Note the new macro is similar to the existing narrow_load macro, but we need a different description and access offset. Combining the two macros into one is probably doable but I don't think it would help readability. vmlinux.h is included in place of bpf.h so we have the definition of struct bpf_nf_ctx. Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Tested-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/bf014046ddcf41677fb8b98d150c14027e9fddba.1754039605.git.paul.chaignon@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Florian Fainelli
|
a81649a4ef |
net: mdio: mdio-bcm-unimac: Correct rate fallback logic
When the parent clock is a gated clock which has multiple parents, the clock provider (clk-scmi typically) might return a rate of 0 since there is not one of those particular parent clocks that should be chosen for returning a rate. Prior to |
||
Eric Dumazet
|
d45cf1e7d7 |
ipv6: reject malicious packets in ipv6_gso_segment()
syzbot was able to craft a packet with very long IPv6 extension headers
leading to an overflow of skb->transport_header.
This 16bit field has a limited range.
Add skb_reset_transport_header_careful() helper and use it
from ipv6_gso_segment()
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Modules linked in:
CPU: 0 UID: 0 PID: 5871 Comm: syz-executor211 Not tainted 6.16.0-rc6-syzkaller-g7abc678e3084 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
RIP: 0010:ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Call Trace:
<TASK>
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
nsh_gso_segment+0x54a/0xe10 net/nsh/nsh.c:110
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
__skb_gso_segment+0x342/0x510 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x857/0x11b0 net/core/dev.c:3950
validate_xmit_skb_list+0x84/0x120 net/core/dev.c:4000
sch_direct_xmit+0xd3/0x4b0 net/sched/sch_generic.c:329
__dev_xmit_skb net/core/dev.c:4102 [inline]
__dev_queue_xmit+0x17b6/0x3a70 net/core/dev.c:4679
Fixes:
|
||
|
Eric Dumazet
|
7cbd49795d |
selftests: avoid using ifconfig
ifconfig is deprecated and not always present, use ip command instead.
Fixes:
|
||
Geert Uytterhoeven
|
a4f0866e3d |
dpll: Make ZL3073X invisible
Currently, the user is always asked about the Microchip Azurite
DPLL/PTP/SyncE core driver, even when I2C and SPI are disabled, and thus
the driver cannot be used at all.
Fix this by making the Kconfig symbol for the core driver invisible
(unless compile-testing), and selecting it by the bus glue sub-drivers.
Drop the modular defaults, as drivers should not default to enabled.
Fixes:
|
||
Christoph Paasch
|
77bf1c55b2 |
net/mlx5: Correctly set gso_segs when LRO is used
When gso_segs is left at 0, a number of assumptions will end up being incorrect throughout the stack. For example, in the GRO-path, we set NAPI_GRO_CB()->count to gso_segs. So, if a non-LRO'ed packet followed by an LRO'ed packet is being processed in GRO, the first one will have NAPI_GRO_CB()->count set to 1 and the next one to 0 (in dev_gro_receive()). Since commit |
||
|
Linus Torvalds
|
821c9e515d |
virtio, vhost: features, fixes
vhost can now support legacy threading if enabled in Kconfig vsock memory allocation strategies for large buffers have been improved, reducing pressure on kmalloc vhost now supports the in-order feature guest bits missed the merge window fixes, cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmiMvQEPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpgr8IAKUrIjqqTYXLkbCWn6tK8T+LxZ6LkMkyHA1v AJ+y5fKDeLsT5QpusD1XRjXJVqXBwQEsTN0pNVuhWHlcCpUeOFEHuJaf/QMncbc3 deFlUfMa3ihniUxBuyhojlWURsf94uTC906lCFXlIsfSKH2CW6/SjKvqR0SH5PhN 5WaqRYiSFFwDlyG2Ul4e5temP/er2KuZfYyvcYCU8VdSEp6bjvqCHd9ztFIVuByp fFWsrHce6IqR8ixOOzavEjzfd8WAN3LGzXntj5KEaX3fZ6HxCZCMv+rNVqvJmLps cSrTgIUo60nCiZb8klUCS1YTEEvmdmJg3UmmddIpIhcsCYJSbOU= =2dxm -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - vhost can now support legacy threading if enabled in Kconfig - vsock memory allocation strategies for large buffers have been improved, reducing pressure on kmalloc - vhost now supports the in-order feature. guest bits missed the merge window. - fixes, cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (30 commits) vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers vsock/virtio: Rename virtio_vsock_skb_rx_put() vhost/vsock: Allocate nonlinear SKBs for handling large receive buffers vsock/virtio: Move SKB allocation lower-bound check to callers vsock/virtio: Rename virtio_vsock_alloc_skb() vsock/virtio: Resize receive buffers so that each SKB fits in a 4K page vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put() vsock/virtio: Validate length in packet header before skb_put() vhost/vsock: Avoid allocating arbitrarily-sized SKBs vhost_net: basic in_order support vhost: basic in order support vhost: fail early when __vhost_add_used() fails vhost: Reintroduce kthread API and add mode selection vdpa: Fix IDR memory leak in VDUSE module exit vdpa/mlx5: Fix release of uninitialized resources on error path vhost-scsi: Fix check for inline_sg_cnt exceeding preallocated limit virtio: virtio_dma_buf: fix missing parameter documentation vhost: Fix typos vhost: vringh: Remove unused functions vhost: vringh: Remove unused iotlb functions ... |
||
Edward Cree
|
60bda1ba06 |
sfc: unfix not-a-typo in comment
Commit
|
||
|
Linus Torvalds
|
0bd0a41a51 |
pci-v6.17-changes
-----BEGIN PGP SIGNATURE-----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=ipv3
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
|
||
Lorenzo Bianconi
|
38358fa3cc |
net: airoha: Fix PPE table access in airoha_ppe_debugfs_foe_show()
In order to avoid any possible race we need to hold the ppe_lock
spinlock accessing the hw PPE table. airoha_ppe_foe_get_entry routine is
always executed holding ppe_lock except in airoha_ppe_debugfs_foe_show
routine. Fix the problem introducing airoha_ppe_foe_get_entry_locked
routine.
Fixes:
|
||
Ido Schimmel
|
f8fded7536 |
selftests: net: Fix flaky neighbor garbage collection test
The purpose of the "Periodic garbage collection" test case is to make
sure that "extern_valid" neighbors are not flushed during periodic
garbage collection, unlike regular neighbor entries.
The test case is currently doing the following:
1. Changing the base reachable time to 10 seconds so that periodic
garbage collection will run every 5 seconds.
2. Changing the garbage collection stale time to 5 seconds so that
neighbors that have not been used in the last 5 seconds will be
considered for removal.
3. Waiting for the base reachable time change to take effect.
4. Adding an "extern_valid" neighbor, a non-"extern_valid" neighbor and
a bunch of other neighbors so that the threshold ("thresh1") will be
crossed and stale neighbors will be flushed during garbage
collection.
5. Waiting for 10 seconds to give garbage collection a chance to run.
6. Checking that the "extern_valid" neighbor was not flushed and that
the non-"extern_valid" neighbor was flushed.
The test sometimes fails in the netdev CI because the non-"extern_valid"
neighbor was not flushed. I am unable to reproduce this locally, but my
theory that since we do not know exactly when the periodic garbage
collection runs, it is possible for it to run at a time when the
non-"extern_valid" neighbor is still not considered stale.
Fix by moving the addition of the two neighbors before step 3 and by
reducing the garbage collection stale time to 1 second, to ensure that
both neighbors are considered stale when garbage collection runs.
Fixes:
|
||
Steven Rostedt
|
db5f0c3e3e |
ring-buffer: Convert ring_buffer_write() to use guard(preempt_notrace)
The function ring_buffer_write() has a goto out to only do a preempt_enable_notrace(). This can be replaced by a guard. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203858.205479143@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
12d5189615 |
tracing: Use __free(kfree) in trace.c to remove gotos
There's a couple of locations that have goto out in trace.c for the only purpose of freeing a variable that was allocated. These can be replaced with __free(kfree). Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203858.040892777@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
debe57fbe1 |
tracing: Add guard() around locks and mutexes in trace.c
There's several locations in trace.c that can be simplified by using guards around raw_spin_lock_irqsave, mutexes and preempt disabling. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.879085376@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
788fa4b47c |
tracing: Add guard(ring_buffer_nest)
Some calls to the tracing ring buffer can happen when the ring buffer is already being written to by the same context (for example, a trace_printk() in between a ring_buffer_lock_reserve() and a ring_buffer_unlock_commit()). In order to not trigger the recursion detection, these functions use ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard() for these functions so that their use cases can be simplified and not need to use goto for the release. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.710501021@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
c89504a703 |
tracing: Remove unneeded goto out logic
Several places in the trace.c file there's a goto out where the out is simply a return. There's no reason to jump to the out label if it's not doing any more logic but simply returning from the function. Replace the goto outs with a return and remove the out labels. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.538726745@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
877d94c74e |
linux-watchdog 6.17-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmiMtmUACgkQ+iyteGJfRsqMPACfTSyOYSTEb7I3C1zG6GL6908D aI8AoIJq4TaJOjcqs7smi2OcGPg9Spki =mrG8 -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-6.17-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - sbsa: Adjust keepalive timeout to avoid MediaTek WS0 race condition - Various improvements and fixes * tag 'linux-watchdog-6.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: sbsa: Adjust keepalive timeout to avoid MediaTek WS0 race condition watchdog: dw_wdt: Fix default timeout watchdog: Don't use "proxy" headers watchdog: it87_wdt: Don't use "proxy" headers watchdog: renesas_wdt: Convert to DEFINE_SIMPLE_DEV_PM_OPS() watchdog: iTCO_wdt: Report error if timeout configuration fails watchdog: rti_wdt: Use of_reserved_mem_region_to_resource() for "memory-region" dt-bindings: watchdog: nxp,pnx4008-wdt: allow clocks property watchdog: ziirave_wdt: check record length in ziirave_firm_verify() |
||
Colin Ian King
|
f8b99c61a8 |
drm/i915/bw: Remove space before newline
There is an extraneous space before a newline in a drm_dbg_kms message. Remove the space. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://lore.kernel.org/r/20250801164658.2438212-1-colin.i.king@gmail.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> |
||
Mark Brown
|
5bbb3913b7 |
Add audio support for acp7.2 platform
Merge series from Venkata Prasad Potturu <venkataprasad.potturu@amd.com>: This patch series is to add legacy and sof audio support for acp7.2 platform. |
||
|
Linus Torvalds
|
196dacf454 |
dmaengine updates for v6.17
Core: - Managed API for dma channel request New support: - Sophgo CV18XX/SG200X dmamux driver - Qualcomm Milos GPI, sc8280xp GPI support Updates: - Conversion of brcm,iproc-sba and marvell,orion-xor binding - Unused code cleanup across drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmiMsksACgkQfBQHDyUj g0dYdhAAi/ekDqoTUjGSaUAL2Bq2sMn4yxt45p6z1sBNIyCt6D1Exek6GOsNeyKt It99SDs/Iw+6HoEWbx46FmLYUV0/Dm/vRjMvw5feLT+XWHN4wTffQuA78w4YOzCV Sf1bzkt1VW5+NQQpKatGzjRwGYiFRUACASFhDZel31B1zGa8jYZLjwKdHenU3+HW 5ItIoujGAXYawk0WKHhkwJxkN1FoNqwCiOcEmKtwekLAqHSw2C20uzBhxipeckf0 ynW3IFRWH9LMRdYQOcLcE08Bx43xKcUM8WKvdwmein/mFY0KFV5ycGBsJGzDLi0N MLbgnq1FynqfVf0/eEe/+kOojoWjFahiEAn+ceVoj4QLpGFBgbmogeyxsnoUfhC9 LsN87UMurdrLXf56/xMchb7YY8NOF6DguebZVUfEi6oZ3bDGtMj/MzEOS5btWG1V qEQVkeZr7OYOMbD+LWVwl40LO41kFfmbKd1SsCHa1ri1qWiMUwBEhrFnT+eYkFtA u2ep/LN5OGKFTkrBYQvVvnvTtVN69aNCKJDuOpQvMAY/rxGWy8VF3D0B0XQTul/8 RTVmyIwGEk+nZ9d+TAMJYb/gU1mzgH7v3qAqXQa+zrF3JImwxOMU3ryFJoIRk17h /3YFJIL8q+HS/NLjEQW7VSIdVGOLiffbkjAWlcvddVSuINg3ESY= =j7pf -----END PGP SIGNATURE----- Merge tag 'dmaengine-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Core: - Managed API for dma channel request New support: - Sophgo CV18XX/SG200X dmamux driver - Qualcomm Milos GPI, sc8280xp GPI support Updates: - Conversion of brcm,iproc-sba and marvell,orion-xor binding - Unused code cleanup across drivers" * tag 'dmaengine-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (23 commits) dt-bindings: dma: fsl-mxs-dma: allow interrupt-names for fsl,imx23-dma-apbx dmaengine: xdmac: make it selectable for ARCH_MICROCHIP dt-bindings: dma: Convert marvell,orion-xor to DT schema dt-bindings: dma: Convert brcm,iproc-sba to DT schema dmaengine: nbpfaxi: Add missing check after DMA map dmaengine: mv_xor: Fix missing check after DMA map and missing unmap dt-bindings: dma: qcom,gpi: document the Milos GPI DMA Engine dmaengine: idxd: Remove __packed from structures dmaengine: ti: Do not enable by default during compile testing dmaengine: sh: Do not enable SH_DMAE_BASE by default during compile testing dmaengine: idxd: Fix warning for deadcode.deadstore dmaengine: mmp: Fix again Wvoid-pointer-to-enum-cast warning dmaengine: fsl-qdma: Add missing fsl_qdma_format kerneldoc dmaengine: qcom: gpi: Drop unused gpi_write_reg_field() dmaengine: fsl-dpaa2-qdma: Drop unused mc_enc() dmaengine: dw-edma: Drop unused dchan2dev() and chan2dev() dmaengine: stm32: Don't use %pK through printk dmaengine: stm32-dma: configure next sg only if there are more than 2 sgs dmaengine: sun4i: Simplify error handling in probe() dt-bindings: dma: qcom,gpi: Document the sc8280xp GPI DMA engine ... |
||
|
Linus Torvalds
|
8582976acc |
phy-for-6.17
- New Support
- Qualcomm Milos Synopsys eUSB2 PHY, SM8750 QMP phy support,
M31 eUSB2 PHY driver
- Samsung Exynos990 usbdrd phy, Exynos7870 MIPI phy support
- Renesas RZ/V2N usb2-phy support
- Updates
- Bulk Yaml binding conversion By Rob H (too many to be listed)
- cadence: Sierra PCIe, USB PHY multilink configuration support
- Qualcomm refactoring of UFS PHY reset and UFS driver support for phy
calibrate API
-----BEGIN PGP SIGNATURE-----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=sHok
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Qualcomm Milos Synopsys eUSB2 PHY, SM8750 QMP phy support, M31
eUSB2 PHY driver
- Samsung Exynos990 usbdrd phy, Exynos7870 MIPI phy support
- Renesas RZ/V2N usb2-phy support
Updates:
- Bulk Yaml binding conversion By Rob H (too many to be listed)
- cadence: Sierra PCIe, USB PHY multilink configuration support
- Qualcomm refactoring of UFS PHY reset and UFS driver support for
phy calibrate API"
* tag 'phy-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (74 commits)
phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequence
dt-bindings: phy: Convert brcm,sr-usb-combo-phy to DT schema
dt-bindings: phy: Convert ti,da830-usb-phy to DT schema
dt-bindings: phy: marvell,mmp2-usb-phy: Drop status from the example
dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* properties
phy: exynos-mipi-video: correct cam0 sysreg property name for exynos7870
phy: qcom: phy-qcom-snps-eusb2: Update init sequence per HPG 1.0.2
phy: qcom: phy-qcom-snps-eusb2: Add missing write from init sequence
dt-bindings: phy: qcom,snps-eusb2: document the Milos Synopsys eUSB2 PHY
dt-bindings: usb: qcom,snps-dwc3: Add Milos compatible
phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal
phy: rockchip-pcie: Enable all four lanes if required
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615
phy: qcom: qmp-combo: Add missing PLL (VCO) configuration on SM8750
phy: qcom: m31-eusb2: drop registration printk
phy: qcom: m31-eusb2: fix match data santity check
phy: qcom: qmp-pcie: Update PHY settings for QCS8300 & SA8775P
phy: qualcomm: phy-qcom-eusb2-repeater: Don't zero-out registers
dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values
phy: mediatek: tphy: Cleanup and document slew calibration
...
|
||
Michal Wajdeczko
|
9fd9f22144 |
drm/xe/pf: Don't resume device from restart worker
The PF's restart worker shouldn't attempt to resume the device on its own, since its goal is to finish PF and VFs reprovisioning on the recently reset GuC. Take extra RPM reference while scheduling a work and release it from the worker or when we cancel a work. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://lore.kernel.org/r/20250801142822.180530-4-michal.wajdeczko@intel.com |
||
|
Michal Wajdeczko
|
c6c86441c4 |
drm/xe/pf: Make sure PF is ready to configure VFs
The PF driver might be resumed just to configure VFs, but since
it is doing some asynchronous GuC reconfigurations after fresh
reset, we should wait until all pending works are completed.
This is especially important in case of LMEM provisioning, since
we also need to update the LMTT and send invalidation requests
to all GuCs, which are expected to be already in the VGT mode.
Fixes:
|
||
|
Michal Wajdeczko
|
a424353937 |
drm/xe/pf: Disable PF restart worker on device removal
We can't let restart worker run once device is removed, since other
data that it might want to access could be already released.
Explicitly disable worker as part of device cleanup action.
Fixes:
|
||
|
Linus Torvalds
|
7a64bdfaf3 |
sound updates #2 for 6.17-rc1
For catching up the remaining stuff for 6.17: only small updates
and the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations
can be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix
-----BEGIN PGP SIGNATURE-----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=Q+iZ
-----END PGP SIGNATURE-----
Merge tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"For catching up the remaining stuff for 6.17: only small updates and
the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations can
be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix"
* tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: usb: scarlett2: Fix missing NULL check
mips: Update HD-audio configs again
LoongArch: Update HD-audio codec configs
arm: Update HD-audio configs again
selftests: ALSA: fix memory leak in utimer test
ALSA: usb-audio: Add DSD support for Comtrue USB Audio device
ALSA: hda/hdmi: Enable drivers as default
ALSA: hda/cirrus: Enable drivers as default
ALSA: hda/realtek: Enable drivers as default
ALSA: hda/realtek - Fix mute LED for HP Victus 16-d1xxx (MB 8A26)
ALSA: hda/realtek - Fix mute LED for HP Victus 16-s0xxx
ALSA: hda: Fix the wrong register was used for DVC of TAS2770
ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()
ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx
ASoC: codecs: Add acpi_match_table for aw88399 driver
ASoC: dt-bindings: atmel,at91-ssc: add microchip,sam9x7-ssc
ASoC: imx-card: Add WM8524 support
ASoC: fsl_xcvr: get channel status data with firmware exists
ASoC: fsl_xcvr: get channel status data when PHY is not exists
ASoC: SDCA: Add support for -cn- value properties
...
|
||
|
Michal Wajdeczko
|
b52f8d7a8f |
drm/xe/pf: Skip LMTT update if no LMEM was provisioned
During VF unprovisioning, if VF was not provisioned with LMEM, there is no need to trigger LMTT update, as VF LMTT was never set. This will spare us sending full TLB invalidation requests. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://lore.kernel.org/r/20250801144418.180584-1-michal.wajdeczko@intel.com |
||
|
Linus Torvalds
|
6fac1139d9 |
soundwire updates for 6.17
Couple of small core changes and driver updates:
- Core: handling of nesting irqs to outside the lock, stream parameters
handing on port prep failures.
- AMD driver support for ACP 7.2 platforms and improved handing of slave
alerts and resume sequences
- Qualcomm updating driver debug spew
- Intel BPT message length limitations, rt721 codec as wake capable etc
-----BEGIN PGP SIGNATURE-----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=+9EP
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"A couple of small core changes and driver updates:
- Core: handling of nesting irqs to outside the lock, stream
parameters handing on port prep failures.
- AMD driver support for ACP 7.2 platforms and improved handing of
slave alerts and resume sequences
- Qualcomm updating driver debug spew
- Intel BPT message length limitations, rt721 codec as wake capable
etc"
* tag 'soundwire-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: Add support for acp7.2 platform
soundwire: stream: restore params when prepare ports fail
soundwire: debugfs: move debug statement outside of error handling
soundwire: amd: add check for status update registers
soundwire: intel_auxdevice: add rt721 codec to wake_capable_list
soundwire: Correct some property names
soundwire: update Intel BPT message length limitation
soundwire: intel_ace2.x: Use str_read_write() helper
soundwire: amd: cancel pending slave status handling workqueue during remove sequence
soundwire: amd: serialize amd manager resume sequence during pm_prepare
soundwire: qcom: demote probe registration printk
ASoC: cs42l43: Remove unnecessary work functions
soundwire: Move handle_nested_irq outside of sdw_dev_lock
MAINTAINERS: Remove Sanyog Kale as reviewer on SoundWire
|
||
Rob Clark
|
f22853435b |
drm/msm: Defer fd_install in SUBMIT ioctl
Avoid fd_install() until there are no more potential error paths, to
avoid put_unused_fd() after the fd is made visible to userspace.
Fixes:
|
||
|
Rob Clark
|
ad70e46e13 |
drm/msm: Fix submit error path cleanup
submit_unpin_objects() should come before we unlock the objects. This
fixes the splat:
WARNING: CPU: 2 PID: 2171 at drivers/gpu/drm/msm/msm_gem.h:395 msm_gem_unpin_locked+0x8c/0xd8 [msm]
Modules linked in: uinput snd_seq_dummy snd_hrtimer aes_ce_ccm snd_soc_wsa884x regmap_sdw q6prm_clocks q6apm_lpass_dais q6apm_dai snd_q6dsp_common q6prm snd_q6apm qcom_pd_mapper cdc_mbim cdc_wdm cdc_ncm r8153_ecm cdc_ether usbnet sunrpc nls_ascii nls_cp437 vfat fat snd_soc_x1e80100 snd_soc_lpass_rx_macro snd_soc_lpass_tx_macro snd_soc_lpass_va_macro snd_soc_lpass_wsa_macro snd_soc_qcom_common soundwire_qcom snd_soc_lpass_macro_common snd_soc_hdmi_codec snd_soc_qcom_sdw ext4 snd_soc_core snd_compress soundwire_bus snd_pcm_dmaengine snd_seq mbcache jbd2 snd_seq_device snd_pcm pm8941_pwrkey snd_timer r8152 qcom_spmi_temp_alarm industrialio snd lenovo_yoga_slim7x ath12k mii arm_smccc_trng soundcore rng_core evdev loop panel_samsung_atna33xc20 msm ubwc_config drm_client_lib drm_gpuvm drm_exec gpu_sched drm_display_helper pmic_glink_altmode aux_hpd_bridge ucsi_glink qcom_battmgr phy_qcom_qmp_combo ps883x cec aux_bridge drm_dp_aux_bus i2c_hid_of aes_ce_blk drm_kms_helper aes_ce_cipher i2c_hid qcom_q6v5_pas
ghash_ce qcom_pil_info drm sha1_ce qcom_common phy_snps_eusb2 qcom_geni_serial qcom_q6v5 qcom_sysmon pinctrl_sm8550_lpass_lpi lpasscc_sc8280xp sbsa_gwdt mdt_loader gpio_keys pmic_glink i2c_dev efivarfs autofs4
CPU: 2 UID: 1000 PID: 2171 Comm: gnome-shell Not tainted 6.16.0-rc4-debug+ #25 PREEMPT(voluntary)
Hardware name: LENOVO 83ED/LNVNB161216, BIOS NHCN53WW 08/02/2024
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : msm_gem_unpin_locked+0x8c/0xd8 [msm]
lr : msm_gem_unpin_locked+0x88/0xd8 [msm]
sp : ffff80009c963820
x29: ffff80009c963820 x28: ffff80009c9639f8 x27: ffff00080552a830
x26: 0000000000000000 x25: ffff0009d5655800 x24: 0000000000000000
x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
x20: ffff000831db5480 x19: ffff000816e74400 x18: 0000000000000000
x17: 0000000000000000 x16: ffffc1396afdd720 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: ffff0008c065bc00
x11: ffff0008c065c000 x10: 0000000000000000 x9 : ffffc13945b19074
x8 : 0000000000000000 x7 : 0000000000000209 x6 : 0000000000000002
x5 : 0000000000019d01 x4 : ffff0008ba8db080 x3 : 000000000004093f
x2 : ffff3ed5e727f000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
msm_gem_unpin_locked+0x8c/0xd8 [msm] (P)
msm_ioctl_gem_submit+0x32c/0x1760 [msm]
drm_ioctl_kernel+0xc8/0x138 [drm]
drm_ioctl+0x2c8/0x618 [drm]
__arm64_sys_ioctl+0xac/0x108
invoke_syscall.constprop.0+0x64/0xe8
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x54/0x1d8
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x19c/0x1a0
irq event stamp: 2185036
hardirqs last enabled at (2185035): [<ffffc1396afeef9c>] _raw_spin_unlock_irqrestore+0x74/0x80
hardirqs last disabled at (2185036): [<ffffc1396afd8164>] el1_dbg+0x24/0x90
softirqs last enabled at (2184778): [<ffffc13969675e44>] fpsimd_restore_current_state+0x3c/0x328
softirqs last disabled at (2184776): [<ffffc13969675e14>] fpsimd_restore_current_state+0xc/0x328
---[ end trace 0000000000000000 ]---
Fixes:
|
||
|
Rob Clark
|
de651b6e04 |
drm/msm: Fix refcnt underflow in error path
If we hit an error path in GEM obj creation before msm_gem_new_handle()
updates obj->resv to point to the gpuvm resv object, then obj->resv
still points to &obj->_resv. In this case we don't want to decrement
the refcount of the object being freed (since the refcnt is already
zero). This fixes the following splat:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 9 PID: 7013 at lib/refcount.c:28 refcount_warn_saturate+0xf4/0x148
Modules linked in: uinput snd_seq_dummy snd_hrtimer aes_ce_ccm snd_soc_wsa884x regmap_sdw q6prm_clocks q6apm_lpass_da>
qcom_pil_info i2c_hid drm_kms_helper qcom_common qcom_q6v5 phy_snps_eusb2 qcom_geni_serial drm qcom_sysmon pinctrl_s>
CPU: 9 UID: 1000 PID: 7013 Comm: deqp-vk Not tainted 6.16.0-rc4-debug+ #25 PREEMPT(voluntary)
Hardware name: LENOVO 83ED/LNVNB161216, BIOS NHCN53WW 08/02/2024
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : refcount_warn_saturate+0xf4/0x148
lr : refcount_warn_saturate+0xf4/0x148
sp : ffff8000a2073920
x29: ffff8000a2073920 x28: 0000000000000010 x27: 0000000000000010
x26: 0000000000000042 x25: ffff000810e09800 x24: 0000000000000010
x23: ffff8000a2073b94 x22: ffff000ddb22de00 x21: ffff000ddb22dc00
x20: ffff000ddb22ddf8 x19: ffff0008024934e0 x18: 000000000000000a
x17: 0000000000000000 x16: ffff9f8c67d77340 x15: 0000000000000000
x14: 00000000ffffffff x13: 2e656572662d7265 x12: 7466612d65737520
x11: 3b776f6c66726564 x10: 00000000ffff7fff x9 : ffff9f8c67506c70
x8 : ffff9f8c69fa26f0 x7 : 00000000000bffe8 x6 : c0000000ffff7fff
x5 : ffff000f53e14548 x4 : ffff6082ea2b2000 x3 : ffff0008b86ab080
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0008b86ab080
Call trace:
refcount_warn_saturate+0xf4/0x148 (P)
msm_gem_free_object+0x248/0x260 [msm]
drm_gem_object_free+0x24/0x40 [drm]
msm_gem_new+0x1c4/0x1e0 [msm]
msm_gem_new_handle+0x3c/0x1a0 [msm]
msm_ioctl_gem_new+0x38/0x70 [msm]
drm_ioctl_kernel+0xc8/0x138 [drm]
drm_ioctl+0x2c8/0x618 [drm]
__arm64_sys_ioctl+0xac/0x108
invoke_syscall.constprop.0+0x64/0xe8
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x54/0x1d8
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x19c/0x1a0
irq event stamp: 3698694
hardirqs last enabled at (3698693): [<ffff9f8c675021dc>] __up_console_sem+0x74/0x90
hardirqs last disabled at (3698694): [<ffff9f8c68ce8164>] el1_dbg+0x24/0x90
softirqs last enabled at (3697578): [<ffff9f8c6744ec5c>] handle_softirqs+0x454/0x4b0
softirqs last disabled at (3697567): [<ffff9f8c67360244>] __do_softirq+0x1c/0x28
---[ end trace 0000000000000000 ]---
Fixes:
|
||
Maíra Canal
|
25654a1756 |
drm/msm: Update global fault counter when faulty process has already ended
The global fault counter is no longer used since commit |
||
|
Rob Clark
|
f4ca529de2 |
drm/msm: Fix pagetables setup/teardown serialization
An atomic counter is not sufficient, as one task could still be in the process of tearing things down while another task increments the counter back up to one and begins setup again. The race condition existed since commit |
||
|
Rob Clark
|
7abb543ff0 |
drm/msm: Fix build with KMS disabled
When commit |
||
Bagas Sanjaya
|
bb324f85f7 |
drm/gpuvm: Wrap drm_gpuvm_sm_map_exec_lock() expected usage in literal code block
Stephen Rothwell reports multiple indentation warnings when merging
drm-msm tree:
Documentation/gpu/drm-mm:506: ./drivers/gpu/drm/drm_gpuvm.c:2445: ERROR: Unexpected indentation. [docutils]
Documentation/gpu/drm-mm:506: ./drivers/gpu/drm/drm_gpuvm.c:2447: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
Documentation/gpu/drm-mm:506: ./drivers/gpu/drm/drm_gpuvm.c:2451: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils]
Documentation/gpu/drm-mm:506: ./drivers/gpu/drm/drm_gpuvm.c:2452: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils]
Documentation/gpu/drm-mm:506: ./drivers/gpu/drm/drm_gpuvm.c:2456: ERROR: Unexpected indentation. [docutils]
Documentation/gpu/drm-mm:506: ./drivers/gpu/drm/drm_gpuvm.c:2457: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils]
Documentation/gpu/drm-mm:506: ./drivers/gpu/drm/drm_gpuvm.c:2458: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils]
Documentation/gpu/drm-mm:506: ./drivers/gpu/drm/drm_gpuvm.c:2459: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils]
Fix these by wrapping drm_gpuvm_sm_map_exec_lock() expected usage
example in literal code block.
Fixes:
|
||
|
Linus Torvalds
|
d6f38c1239 |
tracing changes for 6.17
- Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing
When tracefs was first introduced back in 2014, the directory
/sys/kernel/tracing was added and is the designated location to mount
tracefs. To keep backward compatibility, tracefs was auto-mounted in
/sys/kernel/debug/tracing as well.
All distros now mount tracefs on /sys/kernel/tracing. Having it seen in two
different locations has lead to various issues and inconsistencies.
The VFS folks have to also maintain debugfs_create_automount() for this
single user.
It's been over 10 years. Tooling and scripts should start replacing the
debugfs location with the tracefs one. The reason tracefs was created in the
first place was to allow access to the tracing facilities without the need
to configure debugfs into the kernel. Using tracefs should now be more
robust.
A new config is created: CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED
which is default y, so that the kernel is still built with the automount.
This config allows those that want to remove the automount from debugfs to
do so.
When tracefs is accessed from /sys/kernel/debug/tracing, the following
printk is triggerd:
pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n");
This gives users another 5 years to fix their scripts.
- Use queue_rcu_work() instead of call_rcu() for freeing event filters
The number of filters to be free can be many depending on the number of
events within an event system. Freeing them from softirq context can
potentially cause undesired latency. Use the RCU workqueue to free them
instead.
- Remove pointless memory barriers in latency code
Memory barriers were added to some of the latency code a long time ago with
the idea of "making them visible", but that's not what memory barriers are
for. They are to synchronize access between different variables. There was
no synchronization here making them pointless.
- Remove "__attribute__()" from the type field of event format
When LLVM is used to compile the kernel with CONFIG_DEBUG_INFO_BTF=y and
PAHOLE_HAS_BTF_TAG=y, some of the format fields get expanded with the
following:
field:const char * filename; offset:24; size:8; signed:0;
Turns into:
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
This confuses parsers. Add code to strip these tags from the strings.
- Add eprobe config option CONFIG_EPROBE_EVENTS
Eprobes were added back in 5.15 but were only enabled when another probe was
enabled (kprobe, fprobe, uprobe, etc). The eprobes had no config option
of their own. Add one as they should be a separate entity.
It's default y to keep with the old kernels but still has dependencies on
TRACING and HAVE_REGS_AND_STACK_ACCESS_API.
- Add eprobe documentation
When eprobes were added back in 5.15 no documentation was added to describe
them. This needs to be rectified.
- Replace open coded cpumask_next_wrap() in move_to_next_cpu()
- Have preemptirq_delay_run() use off-stack CPU mask
- Remove obsolete comment about pelt_cfs event
DECLARE_TRACE() appends "_tp" to trace events now, but the comment above
pelt_cfs still mentioned appending it manually.
- Remove EVENT_FILE_FL_SOFT_MODE flag
The SOFT_MODE flag was required when the soft enabling and disabling of
trace events was first introduced. But there was a bug with this approach
as it only worked for a single instance. When multiple users required soft
disabling and disabling the code was changed to have a ref count. The
SOFT_MODE flag is now set iff the ref count is non zero. This is redundant
and just reading the ref count is good enough.
- Fix typo in comment
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIt5ZRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qvriAPsEbOEgMrPF1Tdj1mHLVajYTxI8ft5J
aX5bfM2cDDRVcgEA57JHOXp4d05dj555/hgAUuCWuFp/E0Anp45EnFTedgQ=
=wKZW
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing
When tracefs was first introduced back in 2014, the directory
/sys/kernel/tracing was added and is the designated location to mount
tracefs. To keep backward compatibility, tracefs was auto-mounted in
/sys/kernel/debug/tracing as well.
All distros now mount tracefs on /sys/kernel/tracing. Having it seen
in two different locations has lead to various issues and
inconsistencies.
The VFS folks have to also maintain debugfs_create_automount() for
this single user.
It's been over 10 years. Tooling and scripts should start replacing
the debugfs location with the tracefs one. The reason tracefs was
created in the first place was to allow access to the tracing
facilities without the need to configure debugfs into the kernel.
Using tracefs should now be more robust.
A new config is created: CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED which is
default y, so that the kernel is still built with the automount. This
config allows those that want to remove the automount from debugfs to
do so.
When tracefs is accessed from /sys/kernel/debug/tracing, the
following printk is triggerd:
pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n");
This gives users another 5 years to fix their scripts.
- Use queue_rcu_work() instead of call_rcu() for freeing event filters
The number of filters to be free can be many depending on the number
of events within an event system. Freeing them from softirq context
can potentially cause undesired latency. Use the RCU workqueue to
free them instead.
- Remove pointless memory barriers in latency code
Memory barriers were added to some of the latency code a long time
ago with the idea of "making them visible", but that's not what
memory barriers are for. They are to synchronize access between
different variables. There was no synchronization here making them
pointless.
- Remove "__attribute__()" from the type field of event format
When LLVM is used to compile the kernel with CONFIG_DEBUG_INFO_BTF=y
and PAHOLE_HAS_BTF_TAG=y, some of the format fields get expanded with
the following:
field:const char * filename; offset:24; size:8; signed:0;
Turns into:
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
This confuses parsers. Add code to strip these tags from the strings.
- Add eprobe config option CONFIG_EPROBE_EVENTS
Eprobes were added back in 5.15 but were only enabled when another
probe was enabled (kprobe, fprobe, uprobe, etc). The eprobes had no
config option of their own. Add one as they should be a separate
entity.
It's default y to keep with the old kernels but still has
dependencies on TRACING and HAVE_REGS_AND_STACK_ACCESS_API.
- Add eprobe documentation
When eprobes were added back in 5.15 no documentation was added to
describe them. This needs to be rectified.
- Replace open coded cpumask_next_wrap() in move_to_next_cpu()
- Have preemptirq_delay_run() use off-stack CPU mask
- Remove obsolete comment about pelt_cfs event
DECLARE_TRACE() appends "_tp" to trace events now, but the comment
above pelt_cfs still mentioned appending it manually.
- Remove EVENT_FILE_FL_SOFT_MODE flag
The SOFT_MODE flag was required when the soft enabling and disabling
of trace events was first introduced. But there was a bug with this
approach as it only worked for a single instance. When multiple users
required soft disabling and disabling the code was changed to have a
ref count. The SOFT_MODE flag is now set iff the ref count is non
zero. This is redundant and just reading the ref count is good
enough.
- Fix typo in comment
* tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Add documentation about eprobes
tracing: Have eprobes have their own config option
tracing: Remove "__attribute__()" from the type field of event format
tracing: Deprecate auto-mounting tracefs in debugfs
tracing: Fix comment in trace_module_remove_events()
tracing: Remove EVENT_FILE_FL_SOFT_MODE flag
tracing: Remove pointless memory barriers
tracing/sched: Remove obsolete comment on suffixes
kernel: trace: preemptirq_delay_test: use offstack cpu mask
tracing: Use queue_rcu_work() to free filters
tracing: Replace opencoded cpumask_next_wrap() in move_to_next_cpu()
|
||
|
Linus Torvalds
|
5172a77724 |
tracing tools changes for 6.17:
- Introduce enum timerlat_tracing_mode
Now that BPF based sampling has been added to timerlat, add an enum to
represent which mode timerlat is running in.
- Add action on timelat threshold feature
A new option, --on-threshold, is added, taking an argument
that further specifies the action. Actions added in this patch are:
- trace[,file=<filename>]: Saves tracefs buffer, optionally taking a
filename.
- signal,num=<sig>,pid=<pid>: Sends signal to process. "parent" might
be specified instead of number to send signal to parent process.
- shell,command=<command>: Execute shell command.
- Allow resuming tracing in timerlat bpf
rtla-timerlat BPF program uses a global variable stored in a .bss section to
store whether tracing has been stopped. Map it to allow it to resume tracing
after it has been stopped.
- Add continue action to timerlat
Introduce option to resume tracing after a latency threshold overflow. The
option is implemented as an action named "continue".
- Add action on end feature to timerlat
Implement actions on end next to actions on threshold. A new option,
--on-end is added, parallel to --on-threshold. Instead of being executed
whenever a latency threshold is reached, it is executed at the end of the
measurement.
- Have rtla tests check output with grep
Add argument to the check command in the test suite that takes a regular
expression that the output of rtla command is checked against. This allows
testing for specific information in rtla output in addition to checking the
return value.
- Add tests for timerlat actions
- Update the documentation for the new features
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIuAtBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qk1uAQCzkGc7IUqp8038HU0aZoOwSxS04ma3
NvrF0Vuw8wvVqgD+Pogi1M7fr3LyXHzW4k3Vx7Ot3YSy52T6aCohjcKQ0wo=
=P46B
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
- Introduce enum timerlat_tracing_mode
Now that BPF based sampling has been added to timerlat, add an enum
to represent which mode timerlat is running in
- Add action on timelat threshold feature
A new option, --on-threshold, is added, taking an argument that
further specifies the action. Actions added in this patch are:
- trace[,file=<filename>]: Saves tracefs buffer, optionally taking a
filename
- signal,num=<sig>,pid=<pid>: Sends signal to process. "parent" might
be specified instead of number to send signal to parent process
- shell,command=<command>: Execute shell command
- Allow resuming tracing in timerlat bpf
rtla-timerlat BPF program uses a global variable stored in a .bss
section to store whether tracing has been stopped. Map it to allow it
to resume tracing after it has been stopped
- Add continue action to timerlat
Introduce option to resume tracing after a latency threshold
overflow. The option is implemented as an action named "continue"
- Add action on end feature to timerlat
Implement actions on end next to actions on threshold. A new option,
--on-end is added, parallel to --on-threshold. Instead of being
executed whenever a latency threshold is reached, it is executed at
the end of the measurement
- Have rtla tests check output with grep
Add argument to the check command in the test suite that takes a
regular expression that the output of rtla command is checked
against. This allows testing for specific information in rtla output
in addition to checking the return value
- Add tests for timerlat actions
- Update the documentation for the new features
* tag 'trace-tools-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/tests: Test timerlat -P option using actions
rtla/tests: Add grep checks for base test cases
Documentation/rtla: Add actions feature
rtla/tests: Limit duration to maximum of 10s
rtla/tests: Add tests for actions
rtla/tests: Check rtla output with grep
rtla/timerlat: Add action on end feature
rtla/timerlat: Add continue action
rtla/timerlat_bpf: Allow resuming tracing
rtla/timerlat: Add action on threshold feature
rtla/timerlat: Introduce enum timerlat_tracing_mode
|
||
|
Linus Torvalds
|
c6439bfaab |
Deferred unwind changes for 6.17
This is the core infrastructure for the deferred unwinder that is required for sframes[1]. Several other patch series is based on this work although those patch series are not dependent on each other. In order to simplify the development, having this core series upstream will allow the other series to be worked on in parallel. The other series are: - The two patches to implement x86: https://lore.kernel.org/linux-trace-kernel/20250717004958.260781923@kernel.org/ https://lore.kernel.org/linux-trace-kernel/20250717004958.432327787@kernel.org/ - The s390 work: https://lore.kernel.org/linux-trace-kernel/20250710163522.3195293-1-jremus@linux.ibm.com/ - The perf work: https://lore.kernel.org/linux-trace-kernel/20250718164119.089692174@kernel.org/ - The ftrace work: https://lore.kernel.org/linux-trace-kernel/20250424192612.505622711@goodmis.org/ - The sframe work: https://lore.kernel.org/linux-trace-kernel/20250717012848.927473176@kernel.org/ And more is on the way. The core infrastructure adds the following in kernel APIs: - int unwind_user_faultable(struct unwind_stacktrace *trace); Performs a user space stack trace that may fault user pages in. - int unwind_deferred_init(struct unwind_work *work, unwind_callback_t func); Allows a tracer to register with the unwind deferred infrastructure. - int unwind_deferred_request(struct unwind_work *work, u64 *cookie); Used when a tracer request a deferred trace. Can be called from interrupt or NMI context. - void unwind_deferred_cancel(struct unwind_work *work); Called by a tracer to unregister from the deferred unwind infrastructure. - void unwind_deferred_task_exit(struct task_struct *task); Called by task exit code to flush any pending unwind requests. - void unwind_task_init(struct task_struct *task); Called by do_fork() to initialize the task struct for the deferred unwinder. - void unwind_task_free(struct task_struct *task); Called by do_exit() to free up any resources used by the deferred unwinder. None of the above is actually compiled unless an architecture enables it, which none currently do. [1] https://sourceware.org/binutils/wiki/sframe -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIt9IhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qqqzAQCMT/6qmSq7O746JF0MuGC6fTZnSbAc XGz4JigEqLTRewEA2kaJmD7PBsSRzFdiK2gvyKn95l+PZyWtE9MjTsqeSAc= =Lsbm -----END PGP SIGNATURE----- Merge tag 'trace-deferred-unwind-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull initial deferred unwind infrastructure from Steven Rostedt: "This is the core infrastructure for the deferred unwinder that is required for sframes[1]. Several other patch series are based on this work although those patch series are not dependent on each other. In order to simplify the development, having this core series upstream will allow the other series to be worked on in parallel. The other series are: - The two patches to implement x86 support [2] [3] - The s390 work [4] - The perf work [5] - The ftrace work [6] - The sframe work [7] And more is on the way. The core infrastructure adds the following in kernel APIs: - int unwind_user_faultable(struct unwind_stacktrace *trace); Performs a user space stack trace that may fault user pages in. - int unwind_deferred_init(struct unwind_work *work, unwind_callback_t func); Allows a tracer to register with the unwind deferred infrastructure. - int unwind_deferred_request(struct unwind_work *work, u64 *cookie); Used when a tracer request a deferred trace. Can be called from interrupt or NMI context. - void unwind_deferred_cancel(struct unwind_work *work); Called by a tracer to unregister from the deferred unwind infrastructure. - void unwind_deferred_task_exit(struct task_struct *task); Called by task exit code to flush any pending unwind requests. - void unwind_task_init(struct task_struct *task); Called by do_fork() to initialize the task struct for the deferred unwinder. - void unwind_task_free(struct task_struct *task); Called by do_exit() to free up any resources used by the deferred unwinder. None of the above is actually compiled unless an architecture enables it, which none currently do" Link: https://sourceware.org/binutils/wiki/sframe [1] Link: https://lore.kernel.org/linux-trace-kernel/20250717004958.260781923@kernel.org/ [2] Link: https://lore.kernel.org/linux-trace-kernel/20250717004958.432327787@kernel.org/ [3] Link: https://lore.kernel.org/linux-trace-kernel/20250710163522.3195293-1-jremus@linux.ibm.com/ [4] Link: https://lore.kernel.org/linux-trace-kernel/20250718164119.089692174@kernel.org/ [5] Link: https://lore.kernel.org/linux-trace-kernel/20250424192612.505622711@goodmis.org/ [6] Link: https://lore.kernel.org/linux-trace-kernel/20250717012848.927473176@kernel.org/ [7] * tag 'trace-deferred-unwind-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: unwind: Finish up unwind when a task exits unwind deferred: Use SRCU unwind_deferred_task_work() unwind: Add USED bit to only have one conditional on way back to user space unwind deferred: Add unwind_completed mask to stop spurious callbacks unwind deferred: Use bitmask to determine which callbacks to call unwind_user/deferred: Make unwind deferral requests NMI-safe unwind_user/deferred: Add deferred unwinding interface unwind_user/deferred: Add unwind cache unwind_user/deferred: Add unwind_user_faultable() unwind_user: Add user space unwinding API with frame pointer support |
||
|
Paul Chaignon
|
f914876eec |
bpf: Improve ctx access verifier error message
We've already had two "error during ctx access conversion" warnings triggered by syzkaller. Let's improve the error message by dumping the cnt variable so that we can more easily differentiate between the different error cases. Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/cc94316c30dd76fae4a75a664b61a2dbfe68e205.1754039605.git.paul.chaignon@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Paul Chaignon
|
9e6448f7b1 |
bpf: Check netfilter ctx accesses are aligned
Similarly to the previous patch fixing the flow_dissector ctx accesses,
nf_is_valid_access also doesn't check that ctx accesses are aligned.
Contrary to flow_dissector programs, netfilter programs don't have
context conversion. The unaligned ctx accesses are therefore allowed by
the verifier.
Fixes:
|
||
|
Paul Chaignon
|
ead3d7b2b6 |
bpf: Check flow_dissector ctx accesses are aligned
flow_dissector_is_valid_access doesn't check that the context access is
aligned. As a consequence, an unaligned access within one of the exposed
field is considered valid and later rejected by
flow_dissector_convert_ctx_access when we try to convert it.
The later rejection is problematic because it's reported as a verifier
bug with a kernel warning and doesn't point to the right instruction in
verifier logs.
Fixes:
|
||
Tony Luck
|
49f848788a |
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
Wildcatlake is a mobile CPU. Novalake has both desktop and mobile versions. [ bp: Merge into a single patch. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/20250730150437.4701-1-tony.luck@intel.com |
||
Balasubramani Vivekanandan
|
1fdc4c381f |
drm/xe/devcoredump: Defer devcoredump initialization during probe
Doing devcoredump initializing before GT though look harmless, it leads
to problem during driver unbind. Because of this order, GT/Engine
release functions will be called before xe devcoredump release function
(xe_driver_devcoredump_fini) leading to the following kernel crash[1]
because the devcoredump functions might still use GT/Engine
datastructures after those are freed.
The following crash is observed while running the IGT
xe_wedged@wedged-at-any-timeout. The test forces a wedged state by
submitting a workload which hangs. Then does a unbind/rebind of the
driver to recover from the wedged state.
The hanged workload leads to a devcoredump. The following crash is
noticed when the devcoredump capture races with the driver unbind.
During driver unbind, the release function hw_engine_fini() will be
called which assigns NULL to hwe->gt. But the same data structure is
accessed during the coredump capture in the function
xe_engine_snapshot_print by reading snapshot->hwe->gt.
With this patch, we make sure the devcoredump is stopped before
deinitializing the core driver functions.
[1]:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Workqueue: events_unbound xe_devcoredump_deferred_snap_work [xe]
RIP: 0010:xe_engine_snapshot_print+0x47/0x420 [xe]
Call Trace:
<TASK>
? drm_printf+0x64/0x90
__xe_devcoredump_read+0x23f/0x2d0 [xe]
? __pfx___drm_printfn_coredump+0x10/0x10
? __pfx___drm_puts_coredump+0x10/0x10
xe_devcoredump_deferred_snap_work+0x17a/0x190 [xe]
process_one_work+0x22e/0x6f0
worker_thread+0x1e8/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0x11f/0x250
? __pfx_kthread+0x10/0x10
ret_from_fork+0x47/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
v2: Detailed commit description (Rodrigo)
v3: FIXME added (Rodrigo, Stuart)
Fixes:
|
||
Dan Carpenter
|
7d3a5962d7 |
drm/xe/vf: Fix IS_ERR() vs NULL check in xe_sriov_vf_ccs_init()
The xe_migrate_alloc() function returns NULL on error. It doesn't return
error pointers. Update the checking to match.
Fixes:
|
||
Simon Trimmer
|
ffcfd071ee |
spi: cs42l43: Property entry should be a null-terminated array
The software node does not specify a count of property entries, so the
array must be null-terminated.
When unterminated, this can lead to a fault in the downstream cs35l56
amplifier driver, because the node parse walks off the end of the
array into unknown memory.
Fixes:
|
||
Peter Jakubek
|
1b03391d07 |
ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCC SKU
Add DMI quirk entry for Alienware systems with SKU "0CCC" to enable proper speaker codec configuration (SOC_SDW_CODEC_SPKR). This system requires the same audio configuration as some existing Dell systems. Without this patch, the laptop's speakers and microphone will not work. Signed-off-by: Peter Jakubek <peterjakubek@gmail.com> Link: https://patch.msgid.link/20250731172104.2009007-1-peterjakubek@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Baojun Xu
|
9843cf7b6f |
ASoC: tas2781: Fix the wrong step for TLV on tas2781
The step for TLV on tas2781, should be 50 (-0.5dB).
Fixes:
|
||
Venkata Prasad Potturu
|
1c4c768d06 |
ASoC: amd: acp: Add SoundWire SOF machine driver support for acp7.2 platform
Add SoundWire SOF machine driver support for acp7.2 platform. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://patch.msgid.link/20250801062207.579388-5-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Venkata Prasad Potturu
|
0df24f3479 |
ASoC: amd: acp: Add SoundWire legacy machine driver support for acp7.2 platform
Add SoundWire legacy machine driver support for acp7.2 platform. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://patch.msgid.link/20250801062207.579388-4-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org> |