When working in station mode, TDLS peers are assigned macid 0, even
though 0 was already assigned to the AP. This causes the connection
with the AP to stop working after the TDLS connection is torn down.
Assign the next available macid to TDLS peers, same as client stations
in AP mode.
Fixes: 902cb7b11f ("wifi: rtw88: assign mac_id for vif/sta and update to TX desc")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/58648c09-8553-4bcc-a977-9dc9afd63780@gmail.com
This is needed for AP mode. Otherwise client sees the network, but
can't connect to it.
REG_FWHW_TXQ_CTRL+1 is set to WLAN_TXQ_RPT_EN (0x1F) in common mac
init function (__rtw8723x_mac_init), but the value was overwritten
from mac table later.
Tables with register values for phy parameters initialization are
copied from vendor driver usually. When table will be regenerated,
manual modifications to it may be lost. To avoid regressions in this
case new callback mac_postinit is introduced, that is called after
parameters from table are set.
Tested on rtl8723cs, that reuses rtw8703b driver.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250711084740.3396766-1-andrej.skvortzov@gmail.com
Commit 1e5b3b3fe9 ("rtl8xxxu: Adjust RX skb size to include space for
phystats") increased the skb size when aggregation is enabled but decreased
it for the aggregation disabled case.
As a result, if a frame near the maximum size is received,
rtl8xxxu_rx_complete() is called with status -EOVERFLOW and then the
driver starts to malfunction and no further communication is possible.
Restore the skb size in the aggregation disabled case.
Fixes: 1e5b3b3fe9 ("rtl8xxxu: Adjust RX skb size to include space for phystats")
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250709121522.1992366-1-martin.kaistra@linutronix.de
To support multiple channels, 2 for this case, RFK requires to record each
calibration result for each channel in different RFK tables, and also needs
to notify FW. Then, when FW runs in MCC (multi-channel concurrency), it can
switch to the corresponding calibration result according to the channel.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-15-pkshih@realtek.com
After v0.29.128.0, RTL8852B FW supports SCAN_OFFLOAD_EXTRA_OP feature.
With it, FW can do back-op and TX NULL frames on the second connection.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-14-pkshih@realtek.com
To support multiple channels, 2 for this case, RFK requires to record each
calibration result for each channel in different RFK tables, and also needs
to notify FW. Then, when FW runs in MCC (multi-channel concurrency), it can
switch to the corresponding calibration result according to the channel.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-13-pkshih@realtek.com
After v0.29.127.0, RTL8852BT FW supports SCAN_OFFLOAD_EXTRA_OP feature.
With it, FW can do back-op and TX NULL frames on the second connection.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-12-pkshih@realtek.com
8852BT needs to call TX wake notify once entering Leisure Power Save.
8852C needs to call TX wake notify after entering low power mode. Other
AX chips only MGMT packets needs to call TX wake after entering low power
mode. BE chips no need to call TX wake.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-11-pkshih@realtek.com
8852BT after FW 0.29.127, 8852B after FW 0.29.128 and 8922A after FW
0.35.79, the SER L2 flow determines different L2 types by parameter,
the zero value will trigger FW SER L2 assert.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-10-pkshih@realtek.com
Eric Dumazet says:
====================
tcp: receiver changes
Before accepting an incoming packet:
- Make sure to not accept a packet beyond advertized RWIN.
If not, increment a new SNMP counter (LINUX_MIB_BEYOND_WINDOW)
- ooo packets should update rcv_mss and tp->scaling_ratio.
- Make sure to not accept packet beyond sk_rcvbuf limit.
This series includes three associated packetdrill tests.
====================
Link: https://patch.msgid.link/20250711114006.480026-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check that TCP receiver behavior after "tcp: stronger sk_rcvbuf checks"
Too fat packet is dropped unless receive queue is empty.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, TCP stack accepts incoming packet if sizes of receive queues
are below sk->sk_rcvbuf limit.
This can cause memory overshoot if the packet is big, like an 1/2 MB
BIG TCP one.
Refine the check to take into account the incoming skb truesize.
Note that we still accept the packet if the receive queue is empty,
to not completely freeze TCP flows in pathological conditions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These functions to not modify the skb, add a const qualifier.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We make sure tcpi_rcv_mss and tp->scaling_ratio
are correctly updated if no in-order packet has been received yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_measure_rcv_mss() is used to update icsk->icsk_ack.rcv_mss
(tcpi_rcv_mss in tcp_info) and tp->scaling_ratio.
Calling it from tcp_data_queue_ofo() makes sure these
fields are updated, and permits a better tuning
of sk->sk_rcvbuf, in the case a new flow receives many ooo
packets.
Fixes: dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test checks TCP behavior when receiving a packet beyond the window.
It checks the new TcpExtBeyondWindow SNMP counter.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new SNMP MIB : LINUX_MIB_BEYOND_WINDOW
Incremented when an incoming packet is received beyond the
receiver window.
nstat -az | grep TcpExtBeyondWindow
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, TCP accepts incoming packets which might go beyond the
offered RWIN.
Add to tcp_sequence() the validation of packet end sequence.
Add the corresponding check in the fast path.
We relax this new constraint if the receive queue is empty,
to not freeze flows from buggy peers.
Add a new drop reason : SKB_DROP_REASON_TCP_INVALID_END_SEQUENCE.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some FW features may have variants on how to deal with in leaf functions,
e.g. H2C commands. However, from SW component point of view, it might not
matter which variant is supported exactly. In some cases, SW component may
just care whether any of the variants is supported or not.
So, introduce a concept of FW feature group which can manage a set of FW
features and can easily be checked if at least one of them is supported.
Since CRASH_TRIGGER will have variants and then matches the case mentioned
above, so redefine CRASH_TRIGGER as a FW feature group and add a variant
of type 0 for original handling.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-9-pkshih@realtek.com
Some uefi implementations will write the efistub logs to the display
over a splash image. This is not desirable for debug and info logs, so
lower the default efi log level to exclude them.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
8852B after FW 0.29.127, 8852BT after FW 0.29.127 and 8922A after FW
0.35.76 driver check LPS H2C command received by FW using C2H reg instead
of done ack.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-8-pkshih@realtek.com
For some implementation acting as GO under MCC(GO+STA), the GO's TBTT
might change after STA roams to another AP. This could result the new GO
beacon TX at the STA timeslot of GC+STA, causing GC beacon loss.
Therefore, if the GC detects beacon loss, it will pause MCC and remain
on the GO side for 100 TU to detect the new TBTT beacon.
Additionally, some implementation acting as GO under MCC might TX beacon
too close to the NoA period. The GC calculates timeslot pattern the TOB
(time offset behind) or TOA(time offset ahead) less than the minimum
RX beacon time, which leads to beacon loss. Therefore, disable the
beacon filter in this case. Then, if the GO's TBTT changed, the pattern
TOB/TOA greater than the minimum RX beacon time, the beacon filter should
be retriggered during MCC update.
Moreover, if the beacon filter is disabled initially but the GO timeslot
change, causing QoS null data detection fail, also pause MCC to detect new
TBTT beacon.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-7-pkshih@realtek.com
HW scan of WiFi 7 chips supports multiple op channel configurations.
When concurrency, fill two channels info to HW scan to avoid packet
lost.
However, the OP chan timing is arranged by FW, and the actual stay
period depends on AP. It's hard to calculate total scan time for once
NoA in advance. Therefore, change the scan back to GO OP channel every
200TU and TX beacon to ensure GC doesn't beacon loss. Additionally, add
a period NoA with large duration to ensure GC doesn't TX packet during
GO scanning and can still listen beacon at TBTT to update the new NoA
info after scan complete.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-6-pkshih@realtek.com
MCC stop might triggered by scan, and need to force to stay at GO role
to keep TX beacon. Also, AX chips need to TX more 3 beacons to ensure
GC can receive once NoA beacon before scan when GC in courtesy mode.
BE chips no needs to TX 3 more beacon because it can TX beacon every
200TU during scan, even GC in courtesy mode can receive beacon every
600TU.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-5-pkshih@realtek.com
MCC require time to switch channel when changing timeslot. If GC TX
nulldata 0 while GO is switching channel, GO can't receive it. Therefore,
enlarge the GO NoA duration to cover the channel switching time.
However, the enlarged NoA duration might cause GC's timeslot less than
minimum of RX beacon time. Therefore, adjust strict and anchor pattern
condition to avoid it.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-4-pkshih@realtek.com
The PD lower bound set after one interface is connected, If second
interface needs to connect, packets might not be detected because the
PD lower bound is too high. Therefore, a DIG suspend/resume flow is
added to decrease the PD lower bound during scanning or connection,
and the original PD level is resumed afterward.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-3-pkshih@realtek.com
Packet detection(PD) lower bound is the threshold for sensing packet,
and it is dynamically calculated based on RSSI. In MCC, the two
interfaces have different RSSI values, so it is necessary to set
different values to ensure packets can be received. Therefore, add
H2C command to let firmware to switch PD lower bound when MCC mode.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-2-pkshih@realtek.com
Two more drivers got added that use LIBWX and cause a build warning
WARNING: unmet direct dependencies detected for LIBWX
Depends on [m]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- NGBEVF [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PCI_MSI [=y]
Selected by [m]:
- NGBE [=m] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PCI [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
ld: drivers/net/ethernet/wangxun/libwx/wx_lib.o: in function `wx_clean_tx_irq':
wx_lib.c:(.text+0x5a68): undefined reference to `ptp_schedule_worker'
ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_nway_reset':
wx_ethtool.c:(.text+0x880): undefined reference to `phylink_ethtool_nway_reset'
Add the same dependency on PTP_1588_CLOCK_OPTIONAL to the two driver
using this library module, following the pattern from commit
8fa19c2c69 ("net: wangxun: fix LIBWX dependencies").
Fixes: 377d180bd7 ("net: wangxun: add txgbevf build")
Fixes: a0008a3658 ("net: wangxun: add ngbevf build")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20250711082339.1372821-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Process ACPI DSM function 11 to get 6 GHz VLP support by country. If
not allowed, return error to block the connection. By default, i.e.
ACPI DSM function is not configured, disallow 6 GHz VLP on country US
and country CA, because some platform-level certifications are needed
in FCC regulation before operating on 6 GHz VLP connection.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250709065006.32028-5-pkshih@realtek.com
ACPI DSM function 10 is defined for the enablement for Realtek regulatory
rules. The first rule is whether to allow regd_UK regulatory settings or
not. If not, the strict one, i.e. regd_ETSI, regulatory settings will be
used on country GB.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250709065006.32028-4-pkshih@realtek.com
Originally, fields of ACPI DSM function 6 were handled for countries
following specific regulatory.
BIT(0) for countries following FCC regulatory
BIT(1) for countries following IC regulatory
Now, update to the following (one field for one specific country).
BIT(0) for country US
BIT(1) for country CA
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250709065006.32028-3-pkshih@realtek.com
ACPI DSM function 7 is used to decide whether 6 GHz Standard Power
(SP) is allowed on given countries. Now, add BIT(1) for country CA.
Besides, for searching country index, replace for-loop with index
getter function.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250709065006.32028-2-pkshih@realtek.com
When the bfad_im_probe() function fails during initialization, the memory
pointed to by bfad->im is freed without setting bfad->im to NULL.
Subsequently, during driver uninstallation, when the state machine enters
the bfad_sm_stopping state and calls the bfad_im_probe_undo() function,
it attempts to free the memory pointed to by bfad->im again, thereby
triggering a double-free vulnerability.
Set bfad->im to NULL if probing fails.
Signed-off-by: jackysliu <1972843537@qq.com>
Link: https://lore.kernel.org/r/tencent_3BB950D6D2D470976F55FC879206DE0B9A09@qq.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A net device has a threaded sysctl that can be used to enable threaded
NAPI polling on all of the NAPI contexts under that device. Allow
enabling threaded NAPI polling at individual NAPI level using netlink.
Extend the netlink operation `napi-set` and allow setting the threaded
attribute of a NAPI. This will enable the threaded polling on a NAPI
context.
Add a test in `nl_netdev.py` that verifies various cases of threaded
NAPI being set at NAPI and at device level.
Tested
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250710211203.3979655-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nitin Rawat <quic_nitirawa@quicinc.com> says:
This patch series adds programming support for Qualcomm UFS
to align with Hardware Specification.
In this patch series below changes are taken care.
1. Enable QUnipro Internal Clock Gating
2. Update esi_vec_mask for HW major version >= 6
Link: https://lore.kernel.org/r/20250714075336.2133-1-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: ddcc7e347a ("isci: fix dma_unmap_sg usage")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250627142451.241713-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: b576294826 ("[SCSI] mvsas: Add Marvell 6440 SAS/SATA driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250627134822.234813-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 692e5d73a8 ("scsi: elx: efct: LIO backend interface routines")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250627114117.188480-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Configurations with large numbers of FC rports per host instance are
taking a very long time to complete all devloss work. Increase potential
parallelism by using a per-rport devloss_work_q for dev_loss_work and
fast_io_fail_work.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20250707202225.1203189-1-emilne@redhat.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On Google gs101, the number of UTP transfer request slots (nutrs) is 32,
and in this case the driver ends up programming the UTRL_NEXUS_TYPE
incorrectly as 0.
This is because the left hand side of the shift is 1, which is of type
int, i.e. 31 bits wide. Shifting by more than that width results in
undefined behaviour.
Fix this by switching to the BIT() macro, which applies correct type
casting as required. This ensures the correct value is written to
UTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shift
warning:
UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21
shift exponent 32 is too large for 32-bit type 'int'
For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPE
write.
Fixes: 55f4b1f736 ("scsi: ufs: ufs-exynos: Add UFS host support for Exynos SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250707-ufs-exynos-shift-v1-1-1418e161ae40@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sphinx reports indentation warning on scsi_track_queue_full() return
values:
Documentation/driver-api/scsi:101: ./drivers/scsi/scsi.c:247: ERROR: Unexpected indentation. [docutils]
Fix the warning by making the return values listing a bullet list.
Fixes: eb44820c28 ("[SCSI] Add Documentation and integrate into docbook build")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20250702035822.18072-2-bagasdotme@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 88a678bbc3 ("ibmvscsis: Initial commit of IBM VSCSI Tgt Driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250630111803.94389-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct the misspelling of "transitition" to "transition" in a comment
in ibmvscsi_tgt.c for clarity.
Signed-off-by: Ankit Dange <ankitdange37@gmail.com>
Link: https://lore.kernel.org/r/20250628125320.295824-1-ankitdange37@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a PHY has no driver, the genphy driver is probed/removed directly in
phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the
LEDs will be (un)registered when probing/removing the genphy driver.
This could occur if the leds are for a non-generic driver that isn't
loaded for whatever reason. Synchronously removing the PHY device in
phy_detach leads to the following deadlock:
rtnl_lock()
ndo_close()
...
phy_detach()
phy_remove()
phy_leds_unregister()
led_classdev_unregister()
led_trigger_set()
netdev_trigger_deactivate()
unregister_netdevice_notifier()
rtnl_lock()
There is a corresponding deadlock on the open/register side of things
(and that one is reported by lockdep), but it requires a race while this
one is deterministic. Regular drivers do not have this problem since
they are probed asynchronously (without RTNL held).
Generic PHYs do not support LEDs anyway, so don't bother registering
them.
[JakubL this is a net-next version of
commit f0f2b992d8 ("net: phy: Don't register LEDs for genphy"),
which uses APIs removed in -next.]
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250710201454.1280277-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On 32-bit systems, 64-bit BAR writes to admin queue registers are
performed as two 32-bit writes. Without locking, this can cause partial
writes when accessed concurrently.
Updated per-queue spinlocks is used to serialize these writes and prevent
race conditions.
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The volatile qualifier is redundant for __iomem pointers.
Cleaned up usage in mpi3mr_writeq() and sysif_regs pointer as per
Upstream compliance.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a PHY has no driver, the genphy driver is probed/removed directly in
phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the
LEDs will be (un)registered when probing/removing the genphy driver.
This could occur if the leds are for a non-generic driver that isn't
loaded for whatever reason. Synchronously removing the PHY device in
phy_detach leads to the following deadlock:
rtnl_lock()
ndo_close()
...
phy_detach()
phy_remove()
phy_leds_unregister()
led_classdev_unregister()
led_trigger_set()
netdev_trigger_deactivate()
unregister_netdevice_notifier()
rtnl_lock()
There is a corresponding deadlock on the open/register side of things
(and that one is reported by lockdep), but it requires a race while this
one is deterministic.
Generic PHYs do not support LEDs anyway, so don't bother registering
them.
Fixes: 01e5b728e9 ("net: phy: Add a binding for PHY LEDs")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250707195803.666097-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "is_waiting" flag was updated after calling complete(), which could
lead to a race where the waiting thread wakes up before the flag is
cleared. This may cause a missed wakeup or stale state check.
Reorder the operations to update "is_waiting" before signaling completion
to ensure consistent state.
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Cc: stable@vger.kernel.org
Co-developed-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
