Stop using the obsolete write_cache_pages and use writeback_iter directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
The fileset value of the inode copy from the disk by the reproducer is
AGGR_RESERVED_I. When executing evict, its hard link number is 0, so its
inode pages are not truncated. This causes the bugon to be triggered when
executing clear_inode() because nrpages is greater than 0.
Reported-by: syzbot+6e516bb515d93230bc7b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6e516bb515d93230bc7b
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Replace legacy XT_GETPAGE macro with an inline function that returns a
xtpage_t pointer and update all instances of XT_GETPAGE in jfs_xtree.c
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Simplified xt_getpage by removing size and rc arguments.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
The intended implementations of `ForeignOwnable` will not return null
pointers from `into_foreign`, as this would render the implementation of
`try_from_foreign` useless. Current users of `ForeignOwnable` rely on
`into_foreign` returning non-null pointers. So require `into_foreign` to
return non-null pointers.
Suggested-by: Benno Lossin <lossin@kernel.org>
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250612-pointed-to-v3-2-b009006d86a1@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The current implementation of `ForeignOwnable` is leaking the type of the
opaque pointer to consumers of the API. This allows consumers of the opaque
pointer to rely on the information that can be extracted from the pointer
type.
To prevent this, change the API to the version suggested by Maira
Canal (link below): Remove `ForeignOwnable::PointedTo` in favor of a
constant, which specifies the alignment of the pointers returned by
`into_foreign`.
With this change, `ArcInner` no longer needs `pub` visibility, so change it
to private.
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20240309235927.168915-3-mcanal@igalia.com
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250612-pointed-to-v3-1-b009006d86a1@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The previous version used a verbose `match` to get
`current`, which may be slightly confusing at first
glance.
This change makes it shorter and more clearly expresses
the intent: prefer `next` if available, otherwise fall
back to `prev`.
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708075850.25789-1-work@onurozkan.dev
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently, Rust code uses a typedef for unsigned long to represent
userspace addresses. This is unfortunate because it means that userspace
addresses could accidentally be mixed up with other integers. To
alleviate that, we introduce a new UserPtr struct that wraps a raw
pointer to represent a userspace address. By using a struct, type
checking enforces that userspace addresses cannot be mixed up with
anything else.
This is similar to the __user annotation in C that detects cases where
user pointers are mixed with non-user pointers.
Note that unlike __user pointers in C, this type is just a pointer
without a target type. This means that it can't detect cases such as
mixing up which struct this user pointer references. However, that is
okay due to the way this is intended to be used - generally, you create
a UserPtr in your ioctl callback from the provided usize *before*
dispatching on which ioctl is in use, and then after dispatching on the
ioctl you pass the UserPtr into a UserSliceReader or UserSliceWriter;
selecting the target type does not happen until you have obtained the
UserSliceReader/Writer.
The UserPtr type is not marked with #[derive(Debug)], which means that
it's not possible to print values of this type. This avoids ASLR
leakage.
The type is added to the prelude as it is a fairly fundamental type
similar to c_int. The wrapping_add() method is renamed to
wrapping_byte_add() for consistency with the method name found on raw
pointers.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250616-userptr-newtype-v3-1-5ff7b2d18d9e@google.com
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The tegra variant of smmu-v3 now uses the iommufd mmap interface but
is missing the corresponding import:
ERROR: modpost: module arm_smmu_v3 uses symbol _iommufd_object_depend from namespace IOMMUFD, but does not import it.
ERROR: modpost: module arm_smmu_v3 uses symbol iommufd_viommu_report_event from namespace IOMMUFD, but does not import it.
ERROR: modpost: module arm_smmu_v3 uses symbol _iommufd_destroy_mmap from namespace IOMMUFD, but does not import it.
ERROR: modpost: module arm_smmu_v3 uses symbol _iommufd_object_undepend from namespace IOMMUFD, but does not import it.
ERROR: modpost: module arm_smmu_v3 uses symbol _iommufd_alloc_mmap from namespace IOMMUFD, but does not import it.
Fixes: b135de24cfc0 ("iommu/tegra241-cmdqv: Add user-space use support")
Link: https://patch.msgid.link/r/20250714205747.3475772-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Starting with Rust 1.89.0 (expected 2025-08-07), the Rust compiler fails
to build the `rusttest` target due to undefined references such as:
kernel...-cgu.0:(.text....+0x116): undefined reference to
`rust_helper_kunit_get_current_test'
Moreover, tooling like `modpost` gets confused:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/nova/nova.o
ERROR: modpost: missing MODULE_LICENSE() in drivers/gpu/nova-core/nova_core.o
The reason behind both issues is that the Rust compiler will now [1]
treat `#[used]` as `#[used(linker)]` instead of `#[used(compiler)]`
for our targets. This means that the retain section flag (`R`,
`SHF_GNU_RETAIN`) will be used and that they will be marked as `unique`
too, with different IDs. In turn, that means we end up with undefined
references that did not get discarded in `rusttest` and that multiple
`.modinfo` sections are generated, which confuse tooling like `modpost`
because they only expect one.
Thus start using `#[used(compiler)]` to keep the previous behavior
and to be explicit about what we want. Sadly, it is an unstable feature
(`used_with_arg`) [2] -- we will talk to upstream Rust about it. The good
news is that it has been available for a long time (Rust >= 1.60) [3].
The changes should also be fine for previous Rust versions, since they
behave the same way as before [4].
Alternatively, we could use `#[no_mangle]` or `#[export_name = ...]`
since those still behave like `#[used(compiler)]`, but of course it is
not really what we want to express, and it requires other changes to
avoid symbol conflicts.
Cc: David Wood <david@davidtw.co>
Cc: Wesley Wiser <wwiser@gmail.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/140872 [1]
Link: https://github.com/rust-lang/rust/issues/93798 [2]
Link: https://github.com/rust-lang/rust/pull/91504 [3]
Link: https://godbolt.org/z/sxzWTMfzW [4]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Link: https://lore.kernel.org/r/20250712160103.1244945-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a compatible for the Allwinner A523 SoC, with an integrated
ARM Mali G57 MC1 (Valhall-JM) GPU.
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
Link: https://lore.kernel.org/r/20250711035730.17507-2-iuncuim@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document established Devicetree bindings maintainers review practice:
using DTS coding style property order in both 'properties' and
'required' secions.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250713-dt-bindings-docs-v2-4-672c898054ae@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document established Devicetree bindings maintainers review practice:
instance indexes, either as properties or as custom new OF alias, are
not accepted. Recommended way is to use, depending on the
situation/hardware: different compatible, cell arguments or syscon
phandle arguments.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250713-dt-bindings-docs-v2-3-672c898054ae@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document established Devicetree bindings maintainers review practices:
1. Compatibles should not use bus suffixes to encode the type of
interface, because the parent bus node defines that interface, e.g.
"vendor,device" instead of "vendor,device-i2c" + "vendor,device-spi".
2. If the compatible represents the device as a whole, it should not
contain the type of device in the name.
3. Filenames should match compatible. The best if match is 100%, but if
binding has multiple compatibles, then one of the fallbacks should be
used. Alternatively a genericish name is allowed if it follows
"vendor,device" style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250713-dt-bindings-docs-v2-2-672c898054ae@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Patches adding new device bindings should avoid 'YAML' keyword in the
subject, because all bindings are supposed to be in DT schema format,
which uses YAML. The DT schema is welcomed only in case of patches
doing conversion. Effectively people get confused that subject should
not contain anything else than device name after the prefix, so add two
recommended examples.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250713-dt-bindings-docs-v2-1-672c898054ae@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Starting with Rust 1.89.0 (expected 2025-08-07), under
`CONFIG_RUST_DEBUG_ASSERTIONS=y`, `objtool` may report:
rust/kernel.o: warning: objtool: _R..._6kernel4pageNtB5_4Page8read_raw()
falls through to next function _R..._6kernel4pageNtB5_4Page9write_raw()
(and many others) due to calls to the `noreturn` symbol:
core::panicking::panic_nounwind_fmt
Thus add the mangled one to the list so that `objtool` knows it is
actually `noreturn`.
See commit 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250712160103.1244945-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a table to document the LRC's BO layout to make it easier to
visualize how each region stacks on top of each other.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250710-lrc-refactors-v2-4-a5e2ca03f6bd@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There's no need to submit the nop job again on the first queue. Any
state needed is already saved when the first LRC is switched out. The
comment is a little misleading regarding indirect W/A: first of all
there's still no indirect W/A enabled and secondly, even after they are,
there's no need to submit this job again for having their state
propagated: the indirect W/A will actually run on every LRC switch.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250710-lrc-refactors-v2-6-a5e2ca03f6bd@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There isn't anything to set for CTX_TIMESTAMP handling in the empty
LRC: that is set on every LRC init since it should always start from 0
rather than the value saved in the image after first submission.
The FIXME about perma-pinning also doesn't make much sense as we will
always going to pin the lrc and the GGTT mapping has nothing to do with
VM bind.
Nuke these leftover comments.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250710-lrc-refactors-v2-5-a5e2ca03f6bd@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Both the nop and wa jobs are going through the same boiler plate calls
to emit the job with a timeout and handling error for both bb and job.
Extract emit_job_sync() so those functions create the bb, handling
possible errors and delegate the part about really emitting the job
and waiting for its completion.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250710-lrc-refactors-v2-3-a5e2ca03f6bd@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The bb allocation in emit_wa_job() is wrong in 2 ways: first it's
allocating enough space for the 3DSTATE or hardcoding 4k depending on
the engine. In the first case it doesn't account for the WAs and in the
former it may not be sufficient. Secondly it's using the size instead of
number of dwords, causing the buffer to be 4x bigger than needed:
xe_bb_new() receives number of dwords as parameter and its declaration
was also not following its implementation.
Lastly, reword the debug message since it's not only about the LRC WAs
anymore as it also include the 3DSTATE for render.
While it's unlikely this is causing any real issue, let's calculate the
needed space and allocate just enough.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250710-lrc-refactors-v2-2-a5e2ca03f6bd@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The only case in which new lrc data is created from scratch is when it's
called prior to recording the default lrc. There's no need to check for
NULL init_data since in that case the function already failed: just move
the allocation where it's needed.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250710-lrc-refactors-v2-1-a5e2ca03f6bd@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Drivers could leverage the fact that the VF BAR MMIO reservation is created
for total number of VFs supported by the device by resizing the BAR to
larger size when smaller number of VFs is enabled.
Add pci_iov_vf_bar_set_size() to control the size and a
pci_iov_vf_bar_get_sizes() helper to get the VF BAR sizes that will allow
up to num_vfs to be successfully enabled with the current underlying
reservation size.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250702093522.518099-6-michal.winiarski@intel.com
When the resource representing a VF MMIO BAR reservation is created, its
size is always large enough to accommodate the BAR of all SR-IOV Virtual
Functions that can potentially be created (total VFs). If for whatever
reason it's not possible to accommodate all VFs, the resource is not
assigned and no VFs can be created.
An upcoming change will allow VF BAR size to be modified by drivers at a
later point in time, which means that the check for resource assignment is
no longer sufficient.
Add an additional check that verifies that the VF BAR for all enabled VFs
fits within the underlying reservation resource.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250702093522.518099-5-michal.winiarski@intel.com
Similar to regular resizable BARs, VF BARs can also be resized.
The capability layout is the same as PCI_EXT_CAP_ID_REBAR, which means we
can reuse most of the implementation, the only difference being resource
size calculation (which is multiplied by total VFs) and memory decoding
(which is controlled by a separate VF MSE field in SR-IOV cap).
Extend the pci_resize_resource() function to accept IOV resources.
See PCIe r6.2, sec 7.8.7.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250702093522.518099-4-michal.winiarski@intel.com
There are multiple places where conversions between IOV resources and
corresponding VF BAR numbers are done.
Extract the logic to pci_resource_num_from_vf_bar() and
pci_resource_num_to_vf_bar() helpers.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20250702093522.518099-3-michal.winiarski@intel.com
Similar to regular resizable BARs, VF BARs can also be resized, e.g. by the
system firmware or the PCI subsystem itself.
The capability layout is the same as PCI_EXT_CAP_ID_REBAR.
Add the capability ID and restore it as a part of IOV state.
See PCIe r6.2, sec 7.8.7.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20250702093522.518099-2-michal.winiarski@intel.com
__PAGE_KERNEL(_EXEC) is defined twice, just remove the superfluous set.
No functional changes.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250714170258.390175-1-nik.borisov@suse.com
Add parentheses around loopback address check to fix up logic and make
the socket state filter configurable for the TCP socket iterators.
Iterators can skip the socket state check by setting ss to 0.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Prepare to test TCP socket iteration over both listening and established
sockets by allowing the BPF iterator programs to skip the port check.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Replicate the set of test cases used for UDP socket iterators to test
similar scenarios for TCP listening sockets.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Replace the offset-based approach for tracking progress through a bucket
in the TCP table with one based on socket cookies. Remember the cookies
of unprocessed sockets from the last batch and use this list to
pick up where we left off or, in the case that the next socket
disappears between reads, find the first socket after that point that
still exists in the bucket and resume from there.
This approach guarantees that all sockets that existed when iteration
began and continue to exist throughout will be visited exactly once.
Sockets that are added to the table during iteration may or may not be
seen, but if they are they will be seen exactly once.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Prepare for the next patch that tracks cookies between iterations by
converting struct sock **batch to union bpf_tcp_iter_batch_item *batch
inside struct bpf_tcp_iter_state.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Get rid of the st_bucket_done field to simplify TCP iterator state and
logic. Before, st_bucket_done could be false if bpf_iter_tcp_batch
returned a partial batch; however, with the last patch ("bpf: tcp: Make
sure iter->batch always contains a full bucket snapshot"),
st_bucket_done == true is equivalent to iter->cur_sk == iter->end_sk.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Require that iter->batch always contains a full bucket snapshot. This
invariant is important to avoid skipping or repeating sockets during
iteration when combined with the next few patches. Before, there were
two cases where a call to bpf_iter_tcp_batch may only capture part of a
bucket:
1. When bpf_iter_tcp_realloc_batch() returns -ENOMEM.
2. When more sockets are added to the bucket while calling
bpf_iter_tcp_realloc_batch(), making the updated batch size
insufficient.
In cases where the batch size only covers part of a bucket, it is
possible to forget which sockets were already visited, especially if we
have to process a bucket in more than two batches. This forces us to
choose between repeating or skipping sockets, so don't allow this:
1. Stop iteration and propagate -ENOMEM up to userspace if reallocation
fails instead of continuing with a partial batch.
2. Try bpf_iter_tcp_realloc_batch() with GFP_USER just as before, but if
we still aren't able to capture the full bucket, call
bpf_iter_tcp_realloc_batch() again while holding the bucket lock to
guarantee the bucket does not change. On the second attempt use
GFP_NOWAIT since we hold onto the spin lock.
I did some manual testing to exercise the code paths where GFP_NOWAIT is
used and where ERR_PTR(err) is returned. I used the realloc test cases
included later in this series to trigger a scenario where a realloc
happens inside bpf_iter_tcp_batch and made a small code tweak to force
the first realloc attempt to allocate a too-small batch, thus requiring
another attempt with GFP_NOWAIT. Some printks showed both reallocs with
the tests passing:
Jun 27 00:00:53 crow kernel: again GFP_USER
Jun 27 00:00:53 crow kernel: again GFP_NOWAIT
Jun 27 00:00:53 crow kernel: again GFP_USER
Jun 27 00:00:53 crow kernel: again GFP_NOWAIT
With this setup, I also forced each of the bpf_iter_tcp_realloc_batch
calls to return -ENOMEM to ensure that iteration ends and that the
read() in userspace fails.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Prepare for the next patch which needs to be able to choose either
GFP_USER or GFP_NOWAIT for calls to bpf_iter_tcp_realloc_batch.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Add a KUnit test suite for the SHA-1 library functions, including the
corresponding HMAC support. The core test logic is in the
previously-added hash-test-template.h. This commit just adds the actual
KUnit suite, and it adds the generated test vectors to the tree so that
gen-hash-testvecs.py won't have to be run at build time.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-16-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a KUnit test suite for the Poly1305 functions. Most of its test
cases are instantiated from hash-test-template.h, which is also used by
the SHA-2 tests. A couple additional test cases are also included to
test edge cases specific to Poly1305.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250709200112.258500-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add KUnit test suites for the SHA-384 and SHA-512 library functions,
including the corresponding HMAC support. The core test logic is in the
previously-added hash-test-template.h. This commit just adds the actual
KUnit suites, and it adds the generated test vectors to the tree so that
gen-hash-testvecs.py won't have to be run at build time.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250709200112.258500-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add KUnit test suites for the SHA-224 and SHA-256 library functions,
including the corresponding HMAC support. The core test logic is in the
previously-added hash-test-template.h. This commit just adds the actual
KUnit suites, and it adds the generated test vectors to the tree so that
gen-hash-testvecs.py won't have to be run at build time.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250709200112.258500-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add hash-test-template.h which generates the following KUnit test cases
for hash functions:
test_hash_test_vectors
test_hash_all_lens_up_to_4096
test_hash_incremental_updates
test_hash_buffer_overruns
test_hash_overlaps
test_hash_alignment_consistency
test_hash_ctx_zeroization
test_hash_interrupt_context_1
test_hash_interrupt_context_2
test_hmac (when HMAC is supported)
benchmark_hash (when CONFIG_CRYPTO_LIB_BENCHMARK=y)
The initial use cases for this will be sha224_kunit, sha256_kunit,
sha384_kunit, sha512_kunit, and poly1305_kunit.
Add a Python script gen-hash-testvecs.py which generates the test
vectors required by test_hash_test_vectors,
test_hash_all_lens_up_to_4096, and test_hmac.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250709200112.258500-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
fsverity supports two hash algorithms: SHA-256 and SHA-512. Since both
of these have a library API now, just use the library API instead of
crypto_shash. Even with multiple algorithms, the library-based code
still ends up being quite a bit simpler, due to how clumsy the
old-school crypto API is. The library-based code is also more
efficient, since it avoids overheads such as indirect calls.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630172224.46909-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
This user of SHA-256 does not support any other algorithm, so the
crypto_shash abstraction provides no value. Just use the SHA-256
library API instead, which is much simpler and easier to use.
Acked-by: John Johansen <john.johansen@canonical.com>
Link: https://lore.kernel.org/r/20250630174805.59010-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the x86-optimized SHA-1 code via x86-specific
crypto_shash algorithms, instead just implement the sha1_blocks()
library function. This is much simpler, it makes the SHA-1 library
functions be x86-optimized, and it fixes the longstanding issue where
the x86-optimized SHA-1 code was disabled by default. SHA-1 still
remains available through crypto_shash, but individual architectures no
longer need to handle it.
To match sha1_blocks(), change the type of the nblocks parameter of the
assembly functions from int to size_t. The assembly functions actually
already treated it as size_t.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-14-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Update the IIO ABI documentation to reflect the actual usage of channels
with I and Q modifiers. These are currently only used in a few drivers:
frequency/admv1013 (kernel v5.17):
- in_altvoltageY-altvoltageZ_i_calibphase
- in_altvoltageY-altvoltageZ_q_calibphase
- in_altvoltageY_i_calibbias
- in_altvoltageY_q_calibbias
frequency/admv1014 (kernel v5.18):
- in_altvoltageY_i_phase
- in_altvoltageY_q_phase
- in_altvoltageY_i_offset
- in_altvoltageY_q_offset
- in_altvoltageY_i_calibscale_course
- in_altvoltageY_i_calibscale_fine
- in_altvoltageY_q_calibscale_course
- in_altvoltageY_q_calibscale_fine
frequency/adrf6780 (kernel v5.16):
- out_altvoltageY_i_phase
- out_altvoltageY_q_phase
There are no _raw or _scale attributes in use, so those are all removed.
There are no currentY attributes in use with these modifiers, so those
are also removed. All of the voltageY are changed to altvoltageY since
that is how they are actually used. None of these channels are used
with scan buffers, so all of those attributes are removed as well. And
the {in,out}_altvoltageY_{i,q}_phase attributes were missing so those
are added.
The differential channel names for admv1013 are fixed.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250711-iio-abi-fix-i-and-q-modifiers-v1-1-35963c9c8c01@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
