Add a few kunit tests for the gateway routing. Because we have multiple
route types now (direct and gateway), rename mctp_test_create_route to
mctp_test_create_route_direct, and add a _gateway variant too.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-14-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change allows for gateway routing, where a route table entry
may reference a routable endpoint (by network and EID), instead of
routing directly to a netdevice.
We add support for a RTM_GATEWAY attribute for netlink route updates,
with an attribute format of:
struct mctp_fq_addr {
unsigned int net;
mctp_eid_t eid;
}
- we need the net here to uniquely identify the target EID, as we no
longer have the device reference directly (which would provide the net
id in the case of direct routes).
This makes route lookups recursive, as a route lookup that returns a
gateway route must be resolved into a direct route (ie, to a device)
eventually. We provide a limit to the route lookups, to prevent infinite
loop routing.
The route lookup populates a new 'nexthop' field in the dst structure,
which now specifies the key for the neighbour table lookup on device
output, rather than using the packet destination address directly.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-13-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The netlink route parsing functions end up setting a bunch of output
variables from the rt attributes. This will get messy when the routes
become more complex.
So, split the rt parsing into two types: a lookup (returning route
target data suitable for a route lookup, like when deleting a route) and
a populate (setting fields of a struct mctp_route).
In doing this, we need to separate the route allocation from
mctp_route_add, so add some comments on the lifetime semantics for the
latter.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-12-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In upcoming changes, a route may not have a device associated. Since the
route is matched on the (network, eid) tuple, pass the netid itself into
mctp_route_remove.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-11-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recent changes have modified the extaddr path a little, so add a couple
of kunit tests to af-mctp.c. These check that we're correctly passing
lladdr data between sendmsg/recvmsg and the routing layer.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-9-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Upcoming tests will check semantics of hardware addressing, which
require a dev with ->addr_len != 0. Add a constructor to create a
MCTP interface using a physically-addressed bus type.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-5-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we have the dst->haddr populated by sendmsg (when extended
addressing is in use), we no longer need to stash the link-layer address
in the skb->cb.
Instead, only use skb->cb for incoming lladdr data.
While we're at it: remove cb->src, as was never used.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-4-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change adds a struct mctp_dst, representing the result of a routing
lookup. This decouples the struct mctp_route from the actual
implementation of a routing operation.
This will allow for future routing changes which may require more
involved lookup logic, such as gateway routing - which may require
multiple traversals of the routing table.
Since we only use the struct mctp_route at lookup time, we no longer
hold routes over a routing operation, as we only need it to populate the
dst. However, we do hold the dev while the dst is active.
This requires some changes to the route test infrastructure, as we no
longer have a mock route to handle the route output operation, and
transient dsts are created by the routing code, so we can't override
them as easily.
Instead, we use kunit->priv to stash a packet queue, and a custom
dst_output function queues into that packet queue, which we can use for
later expectations.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-3-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In our input_cloned_frag test, we currently allocate our test buffers
arbitrarily-sized at 100 bytes.
We only expect to receive a max of 15 bytes from the socket, so reduce
to a more appropriate size. There are some upcoming changes to the
routing code which hit a frame-size limit on s390, so reduce the usage
before that lands.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-2-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the output path, only check the skb->cb data when we know it's from
a local socket; input packets will have source address information there
instead.
In order to detect when we're forwarding, set skb->pkt_type on
input/output.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-1-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On some models supported by ideapad-laptop, the HW/FW can remember the
state of keyboard backlight among boots. However, it is always turned
off while shutting down, as a side effect of the LED class device
unregistering sequence.
This is inconvenient for users who always prefer turning on the
keyboard backlight. Thus, set LED_RETAIN_AT_SHUTDOWN on the LED class
device so that the state of keyboard backlight gets remembered, which
also aligns with the behavior of manufacturer utilities on Windows.
Fixes: 503325f84b ("platform/x86: ideapad-laptop: add keyboard backlight control support")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707163808.155876-3-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On devices supported by ideapad-laptop, the HW/FW can remember the
FnLock state among boots. However, since the introduction of the FnLock
LED class device, it is turned off while shutting down, as a side effect
of the LED class device unregistering sequence.
Many users always turn on FnLock because they use function keys much
more frequently than multimedia keys. The behavior change is
inconvenient for them. Thus, set LED_RETAIN_AT_SHUTDOWN on the LED class
device so that the FnLock state gets remembered, which also aligns with
the behavior of manufacturer utilities on Windows.
Fixes: 07f48f668f ("platform/x86: ideapad-laptop: add FnLock LED class device")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707163808.155876-2-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Expanded Serial Peripheral Interface (XSPI) clock DT binding definitions
for the Renesas RZ/V2N (R9A09G056) and RZ/V2H (R9A09G057) SoCs, shared
by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaGV+YgAKCRCKwlD9ZEnx
cJ6pAQDjh4Bffd3ycrQvr02Ra/tBXMI+Vpdyk/AtZV60gecNNQD5AXgJ063OZa44
/wVWQV+r6bRx0N6aDANKpwkpqvJZ5Q4=
=wJ5M
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g057-dt-binding-defs-tag4' into renesas-dts-for-v6.17
Renesas RZ/V2N and RZ/V2H XSPI Clock DT Binding Definitions
Expanded Serial Peripheral Interface (XSPI) clock DT binding definitions
for the Renesas RZ/V2N (R9A09G056) and RZ/V2H (R9A09G057) SoCs, shared
by driver and DT source files.
Renesas Kconfig is using "SoC serial number" for CONFIG symbol, but is
using "SoC chip name" for menu description. Because of it, it looks
random order when we run "make menuconfig".
commit 6d5aded8d5 ("soc: renesas: Sort driver description title")
sorted Renesas Kconfig by menu description title order, but it makes
confusable to add new config.
Let's unify "ARMxx Platform support for ${CHIP_NUMBER} (${CHIP_NAME}),
and sort it again.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/877c0xhk3z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use memcpy() in place of strncpy() in __xfs_xattr_put_listent().
The length is known and a null byte is added manually.
No functional change intended.
Signed-off-by: Pranav Tyagi <pranav.tyagi03@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
RZ/G3E SMARC EVK has 3 user buttons called USER_SW1, USER_SW2 and
USER_SW3 and SLEEP button with NMI support. Add a DT node in device tree
to instantiate the gpio-keys driver for these buttons.
The system can enter into STR state by pressing the sleep button and
wakeup from STR is done by pressing power button. The USER_SW{1,2,3}
configured as wakeup-source, so it can wakeup the system during s2idle.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250702092755.70847-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
If MSTOP is not added for both clocks in a coupled pair, and the clocks
are not disabled in the reverse order of their enable sequence, the MSTOP
may remain enabled when disabling the clocks.
This happens because rzg2l_mod_clock_endisable() executes for coupled
clocks only when a single clock from the pair is enabled. If one clock has
no MSTOP defined, it can result in the MSTOP configuration being left
active when the clocks are disabled out of order (i.e., not in the reverse
order of enabling).
Fixes: c496959527 ("clk: renesas: r9a08g045: Drop power domain instantiation")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250704134328.3614317-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock and reset entries for the Gigabit Ethernet Interfaces (GBETH 0-1)
IPs found on the RZ/G3E SoC. This includes various PLLs, dividers, and mux
clocks needed by these two GBETH IPs.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250702005706.1200059-2-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Currently, ieee80211_rx_data_set_sta() does not correctly handle the
case where the interface supports multiple links (MLO), but the station
does not (non-MLO). This can lead to incorrect link assignment or
unexpected warnings when accessing link information.
Hence, add a fix to check if the station lacks valid link support and
use its default link ID for rx->link assignment. If the station
unexpectedly has valid links, fall back to the default link.
This ensures correct link association and prevents potential issues
in mixed MLO/non-MLO environments.
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250630084119.3583593-1-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tonghao Zhang says:
====================
add broadcast_neighbor for no-stacking networking arch
For no-stacking networking arch, and enable the bond mode 4(lacp) in
datacenter, the switch require arp/nd packets as session synchronization.
More details please see patch.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Zengbing Tu <tuzengbing@didiglobal.com>
====================
Link: https://patch.msgid.link/cover.1751031306.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In LACP mode with broadcast_neighbor enabled, after LACP protocol
recovery, the port can transmit packets. However, if the bond port
doesn't send gratuitous ARP/ND packets to the switch, the switch
won't return packets through the current interface. This causes
traffic imbalance. To resolve this issue, when LACP protocol recovers,
send ARP/ND packets if broadcast_neighbor is enabled.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Signed-off-by: Zengbing Tu <tuzengbing@didiglobal.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/3993652dc093fffa9504ce1c2448fb9dea31d2d2.1751031306.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
User can config or display the bonding broadcast_neighbor option via
iproute2/netlink.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Signed-off-by: Zengbing Tu <tuzengbing@didiglobal.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/76b90700ba5b98027dfb51a2f3c5cfea0440a21b.1751031306.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stacking technology is a type of technology used to expand ports on
Ethernet switches. It is widely used as a common access method in
large-scale Internet data center architectures. Years of practice
have proved that stacking technology has advantages and disadvantages
in high-reliability network architecture scenarios. For instance,
in stacking networking arch, conventional switch system upgrades
require multiple stacked devices to restart at the same time.
Therefore, it is inevitable that the business will be interrupted
for a while. It is for this reason that "no-stacking" in data centers
has become a trend. Additionally, when the stacking link connecting
the switches fails or is abnormal, the stack will split. Although it is
not common, it still happens in actual operation. The problem is that
after the split, it is equivalent to two switches with the same
configuration appearing in the network, causing network configuration
conflicts and ultimately interrupting the services carried by the
stacking system.
To improve network stability, "non-stacking" solutions have been
increasingly adopted, particularly by public cloud providers and
tech companies like Alibaba, Tencent, and Didi. "non-stacking" is
a method of mimicing switch stacking that convinces a LACP peer,
bonding in this case, connected to a set of "non-stacked" switches
that all of its ports are connected to a single switch
(i.e., LACP aggregator), as if those switches were stacked. This
enables the LACP peer's ports to aggregate together, and requires
(a) special switch configuration, described in the linked article,
and (b) modifications to the bonding 802.3ad (LACP) mode to send
all ARP/ND packets across all ports of the active aggregator.
Note that, with multiple aggregators, the current broadcast mode
logic will send only packets to the selected aggregator(s).
+-----------+ +-----------+
| switch1 | | switch2 |
+-----------+ +-----------+
^ ^
| |
+-----------------+
| bond4 lacp |
+-----------------+
| |
| NIC1 | NIC2
+-----------------+
| server |
+-----------------+
- https://www.ruijie.com/fr-fr/support/tech-gallery/de-stack-data-center-network-architecture/
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Signed-off-by: Zengbing Tu <tuzengbing@didiglobal.com>
Link: https://patch.msgid.link/84d0a044514157bb856a10b6d03a1028c4883561.1751031306.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch add acpi matching support for the rt1320 left and right
amplifiers on soundwire link 1 and 2, and the rt714 dmic on
soundwire link 0.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250708080030.1257790-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for rt721 on Soundwire Link 0.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250708080030.1257790-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture via I2S feature support in PTL platform.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250708080030.1257790-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding ES83x6 I2S codec support for PTL platforms and entry in match table.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250708080030.1257790-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_component_set_bias_level() (A) which will call .set_bias_level()
callback (B) will be called from snd_soc_dapm_force_bias_level() (C) only,
and it sets dapm->bias_level (D) inside. No need to set it by each driver.
Remove it.
(A) int snd_soc_component_set_bias_level(...)
{
...
if (component->driver->set_bias_level)
(B) ret = component->driver->set_bias_level(...);
...
}
(C) int snd_soc_dapm_force_bias_level(...)
{
...
if (dapm->component)
(A) ret = snd_soc_component_set_bias_level(...);
if (ret == 0)
(D) dapm->bias_level = level;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plebmmax.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_component_set_bias_level() (A) which will call .set_bias_level()
callback (B) will be called from snd_soc_dapm_force_bias_level() (C) only,
and it sets dapm->bias_level (D) inside. No need to set it by each driver.
Remove it.
(A) int snd_soc_component_set_bias_level(...)
{
...
if (component->driver->set_bias_level)
(B) ret = component->driver->set_bias_level(...);
...
}
(C) int snd_soc_dapm_force_bias_level(...)
{
...
if (dapm->component)
(A) ret = snd_soc_component_set_bias_level(...);
if (ret == 0)
(D) dapm->bias_level = level;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87qzyrmmb2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/linuxppc-dev/20250611104348.192092-19-jirislaby@kernel.org/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The combination of spinlock_t lock and seqcount_spinlock_t seq
in struct fs_struct is an open-coded seqlock_t (see linux/seqlock_types.h).
Combine and switch to equivalent seqlock_t primitives. AFAICS,
that does end up with the same sequence of underlying operations in all
cases.
While we are at it, get_fs_pwd() is open-coded verbatim in
get_path_from_fd(); rather than applying conversion to it, replace with
the call of get_fs_pwd() there. Not worth splitting the commit for that,
IMO...
A bit of historical background - conversion of seqlock_t to
use of seqcount_spinlock_t happened several months after the same
had been done to struct fs_struct; switching fs_struct to seqlock_t
could've been done immediately after that, but it looks like nobody
had gotten around to that until now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/20250702053437.GC1880847@ZenIV
Acked-by: Ahmed S. Darwish <darwi@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Downloading regulatory "firmware" needs a device to hang off of, and so
a platform device seemed like the simplest way to do this. Now that we
have a faux device interface, use that instead as this "regulatory
device" is not anything resembling a platform device at all.
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025070116-growing-skeptic-494c@gregkh
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 69505fe98f.
Initially, conditional lock acquisition was removed to fix an xfstest bug
that was observed during internal testing. The deadlock reported by syzbot
is resolved by reintroducing conditional acquisition. The xfstest bug no
longer occurs on kernel version 6.16-rc1 during internal testing. I
assume that changes in other modules may have contributed to this.
Fixes: 69505fe98f ("fs/ntfs3: Replace inode_trylock with inode_lock")
Reported-by: syzbot+a91fcdbd2698f99db8f4@syzkaller.appspotmail.com
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
tools/scripts/Makefile.include now has the same override,
removing the need for the one in the nolibc Makefile.
Drop the superfluous custom override.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250620-tools-cross-s390-v2-2-ecda886e00e5@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The heuristic to derive a clang target triple from a GCC one does not work
for s390. GCC uses "s390-linux" while clang expects "s390x-linux" or
"powerz-linux".
Add an explicit override.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250620-tools-cross-s390-v2-1-ecda886e00e5@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The pixel_array control size was calculated incorrectly:
the dimensions were swapped (dims[0] should be the height), and the
values should be the width or height divided by PIXEL_ARRAY_DIV
and rounded up. So don't use roundup, but use DIV_ROUND_UP instead.
This bug is harmless in the sense that nothing will break, except that
it consumes way too much memory for this control.
Fixes: 6bc7643d1b ("media: vivid: add pixel_array test control")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
