Our LMEM buffer objects are not cleared by default on alloc
and during VF provisioning we only setup LMTT PTEs for the
actually provisioned LMEM range. But beyond that valid range
we might leave some stale data that could either point to some
other VFs allocations or even to the PF pages.
Explicitly clear all new LMTT page to avoid the risk that a
malicious VF would try to exploit that gap.
While around add asserts to catch any undesired PTE overwrites
and low-level debug traces to track LMTT PT life-cycle.
Fixes: b1d2040582 ("drm/xe/pf: Introduce Local Memory Translation Table")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250701220052.1612-1-michal.wajdeczko@intel.com
(cherry picked from commit 3fae6918a3)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Mark Bloch says:
====================
net/mlx5: HWS, Optimize matchers ICM usage
This series optimizes ICM usage for unidirectional rules and
empty matchers and with the last patch we make hardware steering
the default FDB steering provider for NICs that don't support software
steering.
Hardware steering (HWS) uses a type of rule table container (RTC) that
is unidirectional, so matchers consist of two RTCs to accommodate
bidirectional rules.
This small series enables resizing the two RTCs independently by
tracking the number of rules separately. For extreme cases where all
rules are unidirectional, this results in saving close to half the
memory footprint.
Results for inserting 1M unidirectional rules using a simple module:
Pages Memory
Before this patch: 300k 1.5GiB
After this patch: 160k 900MiB
The 'Pages' column measures the number of 4KiB pages the device requests
for itself (the ICM).
The 'Memory' column is the difference between peak usage and baseline
usage (before starting the test) as reported by `free -h`.
In addition, second to last patch of the series handles a case where all
the matcher's rules were deleted: the large RTCs of the matcher are no
longer required, and we can save some more ICM by shrinking the matcher
to its initial size.
Finally the last patch makes hardware steering the default mode
when in swichdev for NICs that don't have software steering support.
====================
Link: https://patch.msgid.link/20250703185431.445571-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add HW Steering (HWS) as a secondary option for device steering mode. If
the device does not support SW Steering (SWS), HW Steering will be used
as the default, provided it is supported. FW Steering will now be
selected as the default only if both HWS and SWS are unavailable.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703185431.445571-11-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matcher size is dynamic: it starts at initial size, and then it grows
through rehash as more and more rules are added to this matcher.
When rules are deleted, matcher's size is not decreased. Rehash
approach is greedy. The idea is: if the matcher got to a certain size
at some point, chances are - it will get to this size again, so it is
better to avoid costly rehash operations whenever possible.
However, when all the rules of the matcher are deleted, this should
be viewed as special case. If the matcher actually got to the point
where it has zero rules, it might be an indication that some usecase
from the past is no longer happening. This is where some ICM can be
freed.
This patch handles this case: when a number of rules in a matcher
goes down to zero, the matcher's tables are shrunk to the initial
size.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703185431.445571-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a preparation for the following patch that will add support
for shrinking empty matchers, rearrange the code to prevent
forward declaration of functions.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703185431.445571-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Track and grow matcher sizes individually for RX and TX RTCs. This
allows RX-only or TX-only use cases to effectively halve the device
resources they use.
For testing we used a simple module that inserts 1M RX-only rules and
measured the number of pages the device requests, and memory usage as
reported by `free -h`.
Pages Memory
Before this patch: 300k 1.5GiB
After this patch: 160k 900MiB
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703185431.445571-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kernel HWS only uses FDB tables and, as such, creates two lower level
containers (RTCs) for each matcher: one for RX and one for TX. Allow
these RTCs to differ in size by converting the size part of the matcher
attribute to a two element array.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250703185431.445571-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matchers were using the pool abstraction solely as a convenience
to allocate two STE ranges. The pool's core functionality, that
of allocating individual items from the range, was unused.
Matchers rely either on the hardware to hash rules into a table,
or on a user-provided index.
Remove the STE pool from the matcher and allocate the STE ranges
manually instead.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250703185431.445571-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reduce nesting by adding a couple of early return statements.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703185431.445571-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bwc layer will use `mlx5hws_rule_skip` to keep track of numbers of
RX and TX rules individually, so export this function for future usage.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703185431.445571-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`flow_source` is not used anywhere in mlx5hws_action_create_dest_array.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250703185431.445571-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-07-03
Vladimir Oltean converts Intel drivers (ice, igc, igb, ixgbe, i40e) to
utilize new timestamping API (ndo_hwtstamp_get() and ndo_hwtstamp_set()).
For ixgbe:
Paul, Don, Slawomir, and Radoslaw add Malicious Driver Detection (MDD)
support for X550 and E610 devices to detect, report, and handle
potentially malicious VFs.
Simon Horman corrects spelling mistakes.
For igbvf:
Kohei Enju removes a couple of unreported counters and adds reporting
of Tx timeouts.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igbvf: add tx_timeout_count to ethtool statistics
igbvf: remove unused interrupt counter fields from struct igbvf_adapter
ixgbe: spelling corrections
ixgbe: turn off MDD while modifying SRRCTL
ixgbe: add Tx hang detection unhandled MDD
ixgbe: check for MDD events
ixgbe: add MDD support
i40e: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
ixgbe: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
igb: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
igc: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
ice: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
====================
Link: https://patch.msgid.link/20250703174242.3829277-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The shifts and masks for each channel are defined by hardware and
are not something that changes at runtime. Accordingly, describe the
information in an array of const structs and associate elements with
each channel instance, removing the need for the switch and handling of
its default case.
Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-10-3cdd59c934d3@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Previously, channel initialisation was a bit perilous with respect to
resource cleanup in error paths. While the implementation had issues,
it at least made an effort to eliminate some of its problems by first
testing whether any channels were enabled, and bailing out if not.
Having improved the robustness of resource handling in probe() we can
now rearrange the initial channel test to be located with the subsequent
test, and rework the unrolled conditional logic to use a loop for an
improvement in readability.
Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-9-3cdd59c934d3@codeconstruct.com.au
Acked-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Order assignments such that tests for conditions not involving resource
acquisition are ordered before those testing acquired resources, and
order managed resource acquisition before unmanaged where possible. This
way we minimise the amount of manual cleanup required.
In the process, improve readability of the code by introducing a channel
pointer that takes the place of the repeated object lookups.
Acked-by: Jean Delvare <jdelvare@suse.de>
Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-6-3cdd59c934d3@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
of_device_get_match_data() can return NULL, though shouldn't in current
circumstances. Regardless, initialise model_data closer to use so it's
clear we need to test for validity prior to dereferencing.
Acked-by: Jean Delvare <jdelvare@suse.de>
Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-3-3cdd59c934d3@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Russell King says:
====================
net: phylink: support !autoneg configuration for SFPs
This series comes from discussion during a patch series that was posted
at the beginning of April, but these patches were never posted (I was
too busy!)
We restrict ->sfp_interfaces to those that the host system supports,
and ensure that ->sfp_interfaces is cleared when a SFP is removed. We
then add phylink_sfp_select_interface_speed() which will select an
appropriate interface from ->sfp_interfaces for the speed, and use that
in our phylink_ethtool_ksettings_set() when a SFP bus is present on a
directly connected host (not with a PHY.)
====================
Link: https://patch.msgid.link/aGT_hoBELDysGbrp@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add phylink_sfp_select_interface_speed() which attempts to select the
SFP interface based on the ethtool speed when autoneg is turned off.
This allows users to turn off autoneg for SFPs that support multiple
interface modes, and have an appropriate interface mode selected.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1uWu14-005KXo-IO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clear the SFP interfaces bitmap when we're not using it - in other
words, when a module is unplugged, or we're using a PHY on the
module.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1uWu0z-005KXi-EM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When configuring an optical SFP interface, restrict the bitmap of SFP
interfaces (pl->sfp_interfaces) to those that are supported by the
host, rather than calculating this in a local variable.
This will allow us to avoid recomputing this in the
phylink_ethtool_ksettings_set() path.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1uWu0u-005KXc-A4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- hci_sync: Fix not disabling advertising instance
- hci_core: Remove check of BDADDR_ANY in hci_conn_hash_lookup_big_state
- hci_sync: Fix attempting to send HCI_Disconnect to BIS handle
- hci_event: Fix not marking Broadcast Sink BIS as connected
-----BEGIN PGP SIGNATURE-----
iQJNBAABCgA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmhmpiMZHGx1aXoudm9u
LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKTZOD/9ggH1wJ52hD6NeRow2dZHt
BAppV0qNg7p9PkmYPDTOKNkdASmp5VfdLyCXH0vBUjC7+iutrkA/oq5UmIzAM7Uz
1HSELyvsLBL3Gj2AxWyElBtuwo3F7cA70veesZKDJJ92VHlCMMXPJugMCrcy0iJn
sVYENIJKtMnLJMTnnpmBCpRQszQfHGYnzQerbeUlCPoFgn7vsRy+onZ9XiIj6R2K
HGZVk6MhUnNWrXthwcgwAZ0SRq+5nhxhB4jOSSZ6nNnT9Wt8oloDM7KtYSy976QA
Ub2LzvR2E8/XtnTeWus5oLL2kAvz1vClS6gpGrvziElnIryq8aYhwKOO7yhRFmDK
kllpOIPaiDrl1H1nVR4z7t/IK5z/0A0wkTcXXm4WNZkLOj8YmY+BdjPKO39PRxK4
PpcHzsmI6PQjnLeGRi3a4PYfMgVYRvdO/OKSO9/xphqgE+dQdonH7/Dsvw+QkEw8
TgFvfKj8bMNjd11Mynd46P45tnQ3HIrTSYGTbdvoU/n8ZFEjATuHtIxRscw0bRmj
iy4u55JV+U3BAdm2CsRouiiTHnvXt9S2HMyMnemwwxsGpim/JG+IsccYUZd8mvLf
d+N2LWsq71CpVhRSJ50WJDrCEJdKT71KwHbSYLJl8vGhObV3VpTBZ57eVF98SNjm
Zqg8JqLJFvCLOhl4RWj/xA==
=o7T9
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-07-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: Fix not disabling advertising instance
- hci_core: Remove check of BDADDR_ANY in hci_conn_hash_lookup_big_state
- hci_sync: Fix attempting to send HCI_Disconnect to BIS handle
- hci_event: Fix not marking Broadcast Sink BIS as connected
* tag 'for-net-2025-07-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_event: Fix not marking Broadcast Sink BIS as connected
Bluetooth: hci_sync: Fix attempting to send HCI_Disconnect to BIS handle
Bluetooth: hci_core: Remove check of BDADDR_ANY in hci_conn_hash_lookup_big_state
Bluetooth: hci_sync: Fix not disabling advertising instance
====================
Link: https://patch.msgid.link/20250703160409.1791514-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vikas Gupta says:
====================
Introducing Broadcom BNGE Ethernet Driver
This patch series introduces the Ethernet driver for Broadcom’s
BCM5770X chip family, which supports 50/100/200/400/800 Gbps
link speeds. The driver is built as the bng_en.ko kernel module.
To keep the series within a reviewable size (~5K lines of code), this initial
submission focuses on the core infrastructure and initialization, including:
1) PCIe support (device IDs, probe/remove)
2) Devlink support
3) Firmware communication mechanism
4) Creation of network device
5) PF Resource management (rings, IRQs, etc. for netdev & aux dev)
Support for Tx/Rx datapaths, link management, ethtool/devlink operations
and additional features will be introduced in the subsequent patch series.
The bng_en driver shares the bnxt_hsi.h file with the bnxt_en driver,
as the bng_en driver leverages the hardware communication protocol
used by the bnxt_en driver.
====================
Link: https://patch.msgid.link/20250701143511.280702-1-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a network device with netdev features enabled.
Some features are enabled based on the capabilities
advertised by the firmware. Add the skeleton of minimal
netdev operations. Additionally, initialize the parameters
for rings (TX/RX/Completion).
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-11-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Query resources from the firmware and, based on the
availability of resources, initialize the default
settings. The default settings include:
1. Rings and other resource reservations with the
firmware. This ensures that resources are reserved
before network and auxiliary devices are created.
2. Mapping the BAR, which helps access doorbells since
its size is known after querying the firmware.
3. Retrieving the TCs and hardware CoS queue mappings.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-10-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add irq allocation functions. This will help
to allocate IRQs to both netdev and RoCE aux devices.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-9-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Get the resources and capabilities from the firmware.
Add functions to manage the resources with the firmware.
These functions will help netdev reserve the resources
with the firmware before registering the device in future
patches. The resources and their information, such as
the maximum available and reserved, are part of the members
present in the bnge_hw_resc struct.
The bnge_reserve_rings() function also populates
the RSS table entries once the RX rings are reserved with
the firmware.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-8-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Backing store or context memory on the host helps the
device to manage rings, stats and other resources.
Context memory is allocated with the help of ring
alloc/free functions.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-7-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ring allocation/free mechanism which help
to allocate rings (TX/RX/Completion) and backing
stores memory on the host for the device.
Future patches will use these functions.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-6-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Query firmware with the help of basic firmware commands and
cache the capabilities. With the help of basic commands
start the initialization process of the driver with the
firmware.
Since basic information is available from the firmware,
register with devlink.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-5-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to communicate with the firmware.
Future patches will use these functions to send the
messages to the firmware.
Functions support allocating request/response buffers
to send a particular command. Each command has certain
timeout value to which the driver waits for response from
the firmware. In error case, commands may be either timed
out waiting on response from the firmware or may return
a specific error code.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-4-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allocate a base device and devlink interface with minimal
devlink ops.
Add dsn and board related information.
Map PCIe BAR (bar0), which helps to communicate with the
firmware.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-3-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
netpoll: Factor out functions from netpoll_send_udp() and add ipv6 selftest
Refactors the netpoll UDP transmit path to improve code clarity,
maintainability, and protocol-layer encapsulation.
Function netpoll_send_udp() has more than 100 LoC, which is hard to
understand and review. After this patchset, it has only 32 LoC, which is
more manageable.
The series systematically moves the construction of protocol headers
(UDP, IPv4, IPv6, Ethernet) out of the core `netpoll_send_udp()`
function into dedicated static helpers:
- `push_udp()` for UDP header setup
- `push_ipv4()` and `push_ipv6()` for IP header setup
- `push_eth()` for Ethernet header setup
This results in a clean, layered abstraction that mirrors the protocol
stack, reduces code duplication, and improves readability.
Also, to make sure this is not breaking anything, add IPv6 selftest to
netconsole tests, which will exercise this code. This test would also pick
problems similiar to the one fixed by f599020702 ("net: netpoll:
Initialize UDP checksum field before checksumming"), which was
embarrassin we didn't have a selftest catch it.
Anyway, there are **no functional changes** intended in this patchset.
v1: https://lore.kernel.org/20250627-netpoll_untagle_ip-v1-0-61a21692f84a@debian.org
====================
Link: https://patch.msgid.link/20250702-netpoll_untagle_ip-v2-0-13cf3db24e2b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add IPv6 support to the netconsole basic functionality tests by:
- Introducing separate IPv4 and IPv6 address variables (SRCIP4/SRCIP6,
DSTIP4/DSTIP6) to replace the single SRCIP/DSTIP variables
- Adding select_ipv4_or_ipv6() function to choose protocol version
- Updating socat configuration to use UDP6-LISTEN for IPv6 tests
- Adding wait_for_port() wrapper to handle protocol-specific port waiting
- Expanding test matrix to run both basic and extended formats against
both IPv4 and IPv6 protocols
- Improving cleanup to kill any remaining socat processes
- Adding sleep delays for better IPv6 packet handling reliability
The test now validates netconsole functionality across both IP versions,
improving test coverage for dual-stack network environments.
This test would avoid the regression fixed by commit f599020702 ("net:
netpoll: Initialize UDP checksum field before checksumming")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702-netpoll_untagle_ip-v2-7-13cf3db24e2b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor Ethernet header population into dedicated function, completing
the layered abstraction with:
- push_eth() for link layer
- push_udp() for transport
- push_ipv4()/push_ipv6() for network
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702-netpoll_untagle_ip-v2-6-13cf3db24e2b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move UDP header construction from netpoll_send_udp() into a new
static helper function push_udp(). This completes the protocol
layer refactoring by:
1. Creating a dedicated helper for UDP header assembly
2. Removing UDP-specific logic from the main send function
3. Establishing a consistent pattern with existing IPv4/IPv6 helpers:
- push_udp()
- push_ipv4()
- push_ipv6()
The change improves code organization and maintains the encapsulation
pattern established in previous refactorings.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702-netpoll_untagle_ip-v2-5-13cf3db24e2b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move IPv4 header construction from netpoll_send_udp() into a new
static helper function push_ipv4(). This completes the refactoring
started with IPv6 header handling, creating symmetric helper functions
for both IP versions.
Changes include:
1. Extracting IPv4 header setup logic into push_ipv4()
2. Replacing inline IPv4 code with helper call
3. Moving eth assignment after helper calls for consistency
The refactoring reduces code duplication and improves maintainability
by isolating IP version-specific logic.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702-netpoll_untagle_ip-v2-4-13cf3db24e2b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move IPv6 header construction from netpoll_send_udp() into a new
static helper function, push_ipv6(). This refactoring reduces code
duplication and improves readability in netpoll_send_udp().
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702-netpoll_untagle_ip-v2-3-13cf3db24e2b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract UDP checksum calculation logic from netpoll_send_udp()
into a new static helper function netpoll_udp_checksum(). This
reduces code duplication and improves readability for both IPv4
and IPv6 cases.
No functional change intended.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702-netpoll_untagle_ip-v2-2-13cf3db24e2b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace pointer-dereference sizeof() operations with explicit struct names
for improved readability and maintainability. This change:
1. Replaces `sizeof(*udph)` with `sizeof(struct udphdr)`
2. Replaces `sizeof(*ip6h)` with `sizeof(struct ipv6hdr)`
3. Replaces `sizeof(*iph)` with `sizeof(struct iphdr)`
This will make it easy to move code in the upcoming patches.
No functional changes are introduced by this patch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702-netpoll_untagle_ip-v2-1-13cf3db24e2b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle says:
====================
net: ethernet: mtk_eth_soc: improve device tree handling
This series further improves the mtk_eth_soc driver in preparation to
complete upstream support for the MediaTek MT7988 SoC family.
Frank Wunderlich's previous attempt to have the ethernet node included
in mt7988a.dtsi and cover support for MT7988 in the device tree bindings
was criticized for the way mtk_eth_soc references SRAM in device tree[1].
Having a 2nd 'reg' property, like introduced by commit ebb1e4f9cf
("net: ethernet: mtk_eth_soc: add support for in-SoC SRAM") isn't
acceptable and a dedicated "mmio-sram" node should be used instead.
In order to make the code more clean and readable, the existing
hardcoded offsets for the scratch ring, RX and TX rings are dropped in
favor of using the generic allocator. However, support for the hardcoded
offset of the SRAM itself being included as part of the Ethernet's "reg"
MMIO space is kept as it will still be required in order to support
existing legacy device trees of the MT7986 SoC family.
While at it also replace confusing error messages when using legacy
device trees without "interrupt-names" with a warning informing users
that they are using a legacy device tree.
[1]: https://patchwork.ozlabs.org/comment/3533543/
====================
Link: https://patch.msgid.link/cover.1751461762.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use a dedicated "mmio-sram" node and the generic allocator
instead of open-coding SRAM allocation for DMA rings.
Keep support for legacy device trees but notify the user via a
warning to update, and let the ethernet driver create the
gen_pool in this case.
Co-developed-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/c2b9242229d06af4e468204bcf42daa1535c3a72.1751461762.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use platform_get_irq_byname_optional() to avoid outputting error
messages when using legacy device trees which rely identifying
interrupts only by index. Instead, output a warning notifying the user
to update their device tree.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/aeccd00eccb7186d39d2c16292019b3b22ec53b8.1751461762.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
