A bigger array of vecs could've been allocated, but
io_ring_buffers_peek() still decided to cap the mapped range depending
on how much data was available. Hence don't rely on the segment count
to know if the request should be marked as needing cleanup, always
check upfront if the iov array is different than the fast_iov array.
Fixes: 26ec15e4b0 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In KVM guests with Hyper-V hypercalls enabled, the hypercalls
HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST and HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX
allow a guest to request invalidation of portions of a virtual TLB.
For this, the hypercall parameter includes a list of GVAs that are supposed
to be invalidated.
However, when non-canonical GVAs are passed, there is currently no
filtering in place and they are eventually passed to checked invocations of
INVVPID on Intel / INVLPGA on AMD. While AMD's INVLPGA silently ignores
non-canonical addresses (effectively a no-op), Intel's INVVPID explicitly
signals VM-Fail and ultimately triggers the WARN_ONCE in invvpid_error():
invvpid failed: ext=0x0 vpid=1 gva=0xaaaaaaaaaaaaa000
WARNING: CPU: 6 PID: 326 at arch/x86/kvm/vmx/vmx.c:482
invvpid_error+0x91/0xa0 [kvm_intel]
Modules linked in: kvm_intel kvm 9pnet_virtio irqbypass fuse
CPU: 6 UID: 0 PID: 326 Comm: kvm-vm Not tainted 6.15.0 #14 PREEMPT(voluntary)
RIP: 0010:invvpid_error+0x91/0xa0 [kvm_intel]
Call Trace:
vmx_flush_tlb_gva+0x320/0x490 [kvm_intel]
kvm_hv_vcpu_flush_tlb+0x24f/0x4f0 [kvm]
kvm_arch_vcpu_ioctl_run+0x3013/0x5810 [kvm]
Hyper-V documents that invalid GVAs (those that are beyond a partition's
GVA space) are to be ignored. While not completely clear whether this
ruling also applies to non-canonical GVAs, it is likely fine to make that
assumption, and manual testing on Azure confirms "real" Hyper-V interprets
the specification in the same way.
Skip non-canonical GVAs when processing the list of address to avoid
tripping the INVVPID failure. Alternatively, KVM could filter out "bad"
GVAs before inserting into the FIFO, but practically speaking the only
downside of pushing validation to the final processing is that doing so
is suboptimal for the guest, and no well-behaved guest will request TLB
flushes for non-canonical addresses.
Fixes: 260970862c ("KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently")
Cc: stable@vger.kernel.org
Signed-off-by: Manuel Andreas <manuel.andreas@tum.de>
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/c090efb3-ef82-499f-a5e0-360fc8420fb7@tum.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
We should not send smbdirect_data_transfer messages larger than
the negotiated max_send_size, typically 1364 bytes, which means
24 bytes of the smbdirect_data_transfer header + 1340 payload bytes.
This happened when doing an SMB2 write with more than 1340 bytes
(which is done inline as it's below rdma_readwrite_threshold).
It means the peer resets the connection.
When testing between cifs.ko and ksmbd.ko something like this
is logged:
client:
CIFS: VFS: RDMA transport re-established
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
CIFS: VFS: \\carina Send error in SessSetup = -11
smb2_reconnect: 12 callbacks suppressed
CIFS: VFS: reconnect tcon failed rc = -11
CIFS: VFS: reconnect tcon failed rc = -11
CIFS: VFS: reconnect tcon failed rc = -11
CIFS: VFS: SMB: Zero rsize calculated, using minimum value 65536
and:
CIFS: VFS: RDMA transport re-established
siw: got TERMINATE. layer 1, type 2, code 2
CIFS: VFS: smbd_recv:1894 disconnected
siw: got TERMINATE. layer 1, type 2, code 2
The ksmbd dmesg is showing things like:
smb_direct: Recv error. status='local length error (1)' opcode=128
smb_direct: disconnected
smb_direct: Recv error. status='local length error (1)' opcode=128
ksmbd: smb_direct: disconnected
ksmbd: sock_read failed: -107
As smbd_post_send_iter() limits the transmitted number of bytes
we need loop over it in order to transmit the whole iter.
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Meetakshi Setiya <msetiya@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: <stable+noautosel@kernel.org> # sp->max_send_size should be info->max_send_size in backports
Fixes: 3d78fe73fa ("cifs: Build the RDMA SGE list directly from an iterator")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Only call Self::properties_parse() when the FwNode is an OF node.
Once we add ACPI support, we don't want the ACPI device to fail probing
in Self::properties_parse().
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://lore.kernel.org/r/20250620152103.282763-1-igor.korotin.linux@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement FwNode::is_of_node() in order to check whether a FwNode
instance is embedded in a struct device_node.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://lore.kernel.org/r/20250620151504.278766-1-igor.korotin.linux@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add some example usage of the device property methods for reading
DT/ACPI/swnode child nodes and reference args.
Signed-off-by: Remo Senekowitsch <remo@buenzli.dev>
Link: https://lore.kernel.org/r/20250616154511.1862909-4-remo@buenzli.dev
[ Convert 'child@{0,1}' to 'child-{0,1}'; skip child nodes without
'compatible' property in of_unittest_platform_populate() as proposed
by Rob Herring. - Danilo]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Allow Rust code to read reference args from device properties. The
wrapper type `FwNodeReferenceArgs` allows callers to access the buffer
of read args safely.
Signed-off-by: Remo Senekowitsch <remo@buenzli.dev>
Link: https://lore.kernel.org/r/20250616154511.1862909-3-remo@buenzli.dev
[ Move up NArgs; refer to FwNodeReferenceArgs in NArgs doc-comment.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Enforce the MMIO State Data mitigation if KVM has ever mapped host MMIO
into the VM, not if the VM has an assigned device. VFIO is but one of
many ways to map host MMIO into a KVM guest, and even within VFIO,
formally attaching a device to a VM via KVM_DEV_VFIO_FILE_ADD is entirely
optional.
Track whether or not the guest can access host MMIO on a per-MMU basis,
i.e. based on whether or not the vCPU has a mapping to host MMIO. For
simplicity, track MMIO mappings in "special" rools (those without a
kvm_mmu_page) at the VM level, as only Intel CPUs are vulnerable, and so
only legacy 32-bit shadow paging is affected, i.e. lack of precise
tracking is a complete non-issue.
Make the per-MMU and per-VM flags sticky. Detecting when *all* MMIO
mappings have been removed would be absurdly complex. And in practice,
removing MMIO from a guest will be done by deleting the associated memslot,
which by default will force KVM to re-allocate all roots. Special roots
will forever be mitigated, but as above, the affected scenarios are not
expected to be performance sensitive.
Use a VMX_RUN flag to communicate the need for a buffers flush to
vmx_vcpu_enter_exit() so that kvm_vcpu_can_access_host_mmio() and all its
dependencies don't need to be marked __always_inline, e.g. so that KASAN
doesn't trigger a noinstr violation.
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Fixes: 8cb861e9e3 ("x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data")
Tested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/r/20250523011756.3243624-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu, like below
--- ALSA for SoC audio support
Analog Devices --->
AMD --->
Apple --->
Atmel --->
Au1x ----
Broadcom --->
Cirrus Logic --->
DesignWare --->
Freescale --->
Google --->
Hisilicon --->
...
One concern is *vender folder* alphabetical order vs *vender name*
alphabetical order were different. For example "sunxi" menu is
"Allwinner".
Link: https://lore.kernel.org/r/8734c8bf3l.wl-kuninori.morimoto.gx@renesas.com
Allow Rust drivers to access children of a fwnode either by name or by
iterating over all of them.
In C, there is the function `fwnode_get_next_child_node` for iteration
and the macro `fwnode_for_each_child_node` that helps with handling the
pointers. Instead of a macro, a native iterator is used in Rust such
that regular for-loops can be used.
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Remo Senekowitsch <remo@buenzli.dev>
Link: https://lore.kernel.org/r/20250616154511.1862909-2-remo@buenzli.dev
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
By default, HPD was disabled on SN65DSI86 bridge. When the driver was
added (commit "a095f15c00e27"), the HPD_DISABLE bit was set in pre-enable
call which was moved to other function calls subsequently.
Later on, commit "c312b0df3b" added detect utility for DP mode. But with
HPD_DISABLE bit set, all the HPD events are disabled[0] and the debounced
state always return 1 (always connected state).
Set HPD_DISABLE bit conditionally based on display sink's connector type.
Since the HPD_STATE is reflected correctly only after waiting for debounce
time (~100-400ms) and adding this delay in detect() is not feasible
owing to the performace impact (glitches and frame drop), remove runtime
calls in detect() and add hpd_enable()/disable() bridge hooks with runtime
calls, to detect hpd properly without any delay.
[0]: <https://www.ti.com/lit/gpn/SN65DSI86> (Pg. 32)
Fixes: c312b0df3b ("drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP")
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250624044835.165708-1-j-choudhary@ti.com
Each Chip-Select (CS) of a Unified Memory Controller (UMC) on AMD Zen-based
SOCs has an Address Mask and a Secondary Address Mask register associated with
it. The amd64_edac module logs DIMM sizes on a per-UMC per-CS granularity
during init using these two registers.
Currently, the module primarily considers only the Address Mask register for
computing DIMM sizes. The Secondary Address Mask register is only considered
for odd CS. Additionally, if it has been considered, the Address Mask register
is ignored altogether for that CS. For power-of-two DIMMs i.e. DIMMs whose
total capacity is a power of two (32GB, 64GB, etc), this is not an issue
since only the Address Mask register is used.
For non-power-of-two DIMMs i.e., DIMMs whose total capacity is not a power of
two (48GB, 96GB, etc), however, the Secondary Address Mask register is used
in conjunction with the Address Mask register. However, since the module only
considers either of the two registers for a CS, the size computed by the
module is incorrect. The Secondary Address Mask register is not considered for
even CS, and the Address Mask register is not considered for odd CS.
Introduce a new helper function so that both Address Mask and Secondary
Address Mask registers are considered, when valid, for computing DIMM sizes.
Furthermore, also rename some variables for greater clarity.
Fixes: 81f5090db8 ("EDAC/amd64: Support asymmetric dual-rank DIMMs")
Closes: https://lore.kernel.org/dbec22b6-00f2-498b-b70d-ab6f8a5ec87e@natrix.lt
Reported-by: Žilvinas Žaltiena <zilvinas@natrix.lt>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Žilvinas Žaltiena <zilvinas@natrix.lt>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250529205013.403450-1-avadhut.naik@amd.com
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
Add SoundWire machines as alternate machines for ACP7.0 & ACP7.1
platforms with the below machine configuration.
Link 0: RT722 codec with three endpoints: Headset, Speaker, and DMIC.
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Minor cleanup while preparing for adding WCD9378 support: do not use
enum for values which are not an enumeration.
The sev_data_snp_launch_start structure should include a 4-byte
desired_tsc_khz field before the gosvw field, which was missed in the
initial implementation. As a result, the structure is 4 bytes shorter than
expected by the firmware, causing the gosvw field to start 4 bytes early.
Fix this by adding the missing 4-byte member for the desired TSC frequency.
Fixes: 3a45dc2b41 ("crypto: ccp: Define the SEV-SNP commands")
Cc: stable@vger.kernel.org
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Vaishali Thakkar <vaishali.thakkar@suse.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Link: https://lore.kernel.org/r/20250408093213.57962-3-nikunj@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This reverts commit 3972872e45.
There are several things wrong with the way this WA was implemented:
- The KLV is only supported on GuC 70.47.0 or newer, so we shouldn't
apply it unconditionally.
- The KLV requires 2 DWs of data, which are not currently provided.
The GuC currently ignores any unknown KLVs, so on versions older that
70.47.0 nothing happens. However, starting on 70.47.0 the GuC attempts
to parse the KLV and fails due to the missing data, causing a GuC load
abort.
Given that 70.47.0 is the first GuC version approved for public release
for PTL, let's revert this patch so it doesn't cause the GuC load to
fail with that blob. We can then re-apply it properly fixed after the
GuC definition is merged, which will also have the added benefit of
running the KLV addition through CI with the right GuC version.
Fixes: 3972872e45 ("drm/xe/ptl: Apply Wa_16026007364")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: sanirban <sk.anirban@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250625001202.1616606-2-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
gs101 differs to other currently supported SoCs in that it has 3 wakeup
mask registers for the 67 external wakeup interrupt pins in alive and
far_alive.
EINT_WAKEUP_MASK 0x3A80 EINT[31:0]
EINT_WAKEUP_MASK2 0x3A84 EINT[63:32]
EINT_WAKEUP_MASK3 0x3A88 EINT[66:64]
Add gs101 specific callbacks and a dedicated gs101_wkup_irq_chip struct to
handle these differences.
The current wakeup mask with upstream is programmed as
WAKEUP_MASK0[0x3A80] value[0xFFFFFFFF]
WAKEUP_MASK1[0x3A84] value[0xF2FFEFFF]
WAKEUP_MASK2[0x3A88] value[0xFFFFFFFF]
Which corresponds to the following wakeup sources:
gpa7-3 vol down
gpa8-1 vol up
gpa10-1 power
gpa8-2 typec-int
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250619-gs101-eint-mask-v1-2-89438cfd7499@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To avoid having an exact copy of this struct for gs101 rename it and use it
for both SoCs for eint banks.
The purpose of this for exynosautov920 and gs101 is to obtain the PMU
syscon for writing the calculated WAKEUP_MASK register(s).
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250619-gs101-eint-mask-v1-1-89438cfd7499@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Commit 37d078e51b ("drm/xe/uapi: Split xe_sync types from flags") renamed some DRM_XE_SYNC_*
defines but later commits kept using the old names. Correct them with the new definition.
v2: correct fixes tag and update commit message to explain why (Lucas)
Fixes: 9329f06672 ("drm/xe/uapi: Use LR abbrev for long-running vms")
Fixes: 4b437893a8 ("drm/xe/uapi: More uAPI documentation additions and cosmetic updates")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Zongyao Bai <zongyao.bai@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250608230133.1250849-1-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Replace the return statement with setting ret = -EINVAL and jumping to
the err label to ensure resources are released via io_release_dmabuf.
Fixes: a5c98e9424 ("io_uring/zcrx: dmabuf backed zerocopy receive")
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/r/20250625102703.68336-1-superman.xpt@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The suggestion from UCM for 2 speaker components is using 1 "spk" tag
with 2 component names. Like "spk:rt722+rt1320". The commit removes the
creation of the "spk" components in each rtd_init callback and creat the
string in asoc_sdw_rtd_init().
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250625140430.311865-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the sdw machine driver uses different way to get the
component name from the DAI name for different codecs in the rtd_init
callback. It means that we need to rely on the rtd_init callback to get
the component name. Add an optional component string to the
asoc_sdw_dai_info struct allows the machine driver to get the component
name directly.
The commit adds the component names for the AMP dais for the preparation
to set card->components string for combined speaker configs.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250625140430.311865-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
New dtschema v2025.6 enforces different naming on I2C nodes thus new
dtbs_check warnings appeared for I2C GPIO nodes:
exynos5433-tm2.dtb: i2c-gpio-0 (i2c-gpio):
$nodename:0: 'i2c-gpio-0' does not match '^i2c(@.+|-[a-z0-9]+)?$'
exynos5433-tm2.dtb: i2c-gpio-0 (i2c-gpio):
Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'amplifier@31' were unexpected)
Rename the nodes to a generic i2c-[0-9]+ style with numbers continuing
the SoC I2C controller indexing (3 controllers) for simplicity and
obviousness, even if the SoC I2C controller is not enabled on given
board. The names anyway would not conflict with SoC ones because of
unit addresses.
Verified with comparing two fdt (after fdtdump).
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Closes: https://lore.kernel.org/all/aCtD7BH5N_uPGkq7@shikoro/
Link: https://lore.kernel.org/r/20250612095549.77954-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
New dtschema v2025.6 enforces different naming on I2C nodes thus new
dtbs_check warnings appeared for I2C GPIO nodes:
s5pv210-fascinate4g.dtb: i2c-gpio-0 (i2c-gpio):
$nodename:0: 'i2c-gpio-0' does not match '^i2c(@.+|-[a-z0-9]+)?$'
s5pv210-fascinate4g.dtb: i2c-gpio-0 (i2c-gpio):
Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'audio-codec@1a' were unexpected)
Rename the nodes to a generic i2c-[0-9]+ style with numbers continuing
the SoC I2C controller indexing (3 controllers) for simplicity and
obviousness, even if the SoC I2C controller is not enabled on given
board. The names anyway would not conflict with SoC ones because of
unit addresses.
Verified with comparing two fdt (after fdtdump).
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Closes: https://lore.kernel.org/all/aCtD7BH5N_uPGkq7@shikoro/
Link: https://lore.kernel.org/r/20250612094807.62532-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
New dtschema v2025.6 enforces different naming on I2C nodes thus new
dtbs_check warnings appeared for I2C GPIO nodes:
exynos4212-tab3-lte8.dtb: i2c-gpio-3 (i2c-gpio):
$nodename:0: 'i2c-gpio-3' does not match '^i2c(@.+|-[a-z0-9]+)?$'
exynos4212-tab3-lte8.dtb: i2c-gpio-3 (i2c-gpio):
Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'magnetometer@2e' were unexpected)
Rename the nodes to a generic i2c-[0-9]+ style with numbers continuing
the SoC I2C controller indexing (Exynos3250: 8 controllers, Exynos4: 9
controllers) for simplicity and obviousness, even if the SoC I2C
controller is not enabled on given board. The names anyway would not
conflict with SoC ones because of unit addresses.
Verified with comparing two fdt (after fdtdump).
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Closes: https://lore.kernel.org/all/aCtD7BH5N_uPGkq7@shikoro/
Link: https://lore.kernel.org/r/20250612094807.62532-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The usage of MUTEX_MOD1 and MUTEX_MOD2 for calculating mod settings
over 32 has been confusing. To improve consistency and clarity, these
defines need to fit into the same MUTEX_MOD define as possible.
However, MUTEX_MOD1 cannot be directly used for all SoCs because,
for example, the mod1 register (0x34) of MT2712 is not adjacent to
its mod0 register (0x2c). To address this, a `mutex_mod1_reg` field
is introduced in the mutex driver data structure. This allows all
SoCs to use a unified MUTEX_MOD to determine their register offsets.
With this change, the separate usage of MUTEX_MOD1 and MUTEX_MOD2 is
eliminated, simplifying the logic for obtaining offsets and mod IDs.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250624103928.408194-1-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Move the LINK_WAIT_SLEEP_MS and LINK_WAIT_MAX_RETRIES macros to pci.h.
Prefix the macros with PCIE_ in order to avoid redefining these for
drivers that already have macros named like this.
No functional changes.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250625102347.1205584-15-cassel@kernel.org
As per PCIe r6.0, sec 6.6.1, a Downstream Port that supports Link speeds
greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link
training completes before sending a Configuration Request.
Add this delay in dw_pcie_wait_for_link(), after the link is reported as
up. The delay will only be performed in the success case where the link
came up.
DWC glue drivers that have a link up IRQ (drivers that set
use_linkup_irq = true) do not call dw_pcie_wait_for_link(), instead they
perform this delay in their threaded link up IRQ handler.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Link: https://patch.msgid.link/20250625102347.1205584-14-cassel@kernel.org
Per PCIe r6.0, sec 6.6.1, software must generally wait a minimum of
100ms (PCIE_RESET_CONFIG_WAIT_MS) after Link training completes before
sending a Configuration Request.
Prior to 36971d6c5a ("PCI: qcom: Don't wait for link if we can detect
Link Up"), qcom used dw_pcie_wait_for_link(), which waited between 0
and 90ms after the link came up before we enumerate the bus, and this
was apparently enough for most devices.
After 36971d6c5a, qcom_pcie_global_irq_thread() started enumeration
immediately when handling the link-up IRQ, and devices (e.g., Laszlo
Fiat's PLEXTOR PX-256M8PeGN NVMe SSD) may not be ready to handle config
requests yet.
Delay PCIE_RESET_CONFIG_WAIT_MS after the link-up IRQ before starting
enumeration.
Fixes: 82a823833f ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Link: https://patch.msgid.link/20250625102347.1205584-13-cassel@kernel.org
Per PCIe r6.0, sec 6.6.1, software must generally wait a minimum of
100ms (PCIE_RESET_CONFIG_WAIT_MS) after Link training completes before
sending a Configuration Request.
Prior to ec9fd499b9 ("PCI: dw-rockchip: Don't wait for link since
we can detect Link Up"), dw-rockchip used dw_pcie_wait_for_link(),
which waited between 0 and 90ms after the link came up before we
enumerate the bus, and this was apparently enough for most devices.
After ec9fd499b9, rockchip_pcie_rc_sys_irq_thread() started
enumeration immediately when handling the link-up IRQ, and devices
(e.g., Laszlo Fiat's PLEXTOR PX-256M8PeGN NVMe SSD) may not be ready
to handle config requests yet.
Delay PCIE_RESET_CONFIG_WAIT_MS after the link-up IRQ before starting
enumeration.
Fixes: 0e898eb8df ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Cc: Laszlo Fiat <laszlo.fiat@proton.me>
Link: https://patch.msgid.link/20250625102347.1205584-12-cassel@kernel.org
There is a PPU0 reset control bit in the same register as the PPU1
reset control. This missing reset control is for the PCK-600 unit
in the SoC. Manual tests show that the reset control indeed exists,
and if not configured, the system will hang when the PCK-600 registers
are accessed.
Add a reset entry for it at the end of the existing ones.
Fixes: 8cea339cfb ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20250619171025.3359384-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
There is a PPU0 reset control bit in the same register as the PPU1
reset control. This missing reset control is for the PCK-600 unit
in the SoC. Manual tests show that the reset control indeed exists,
and if not configured, the system will hang when the PCK-600 registers
are accessed.
Add a reset entry for it at the end of the existing ones.
Fixes: 52dbf84857 ("dt-bindings: clk: sunxi-ng: document two Allwinner A523 CCUs")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250619171025.3359384-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Macro PCIE_RESET_CONFIG_DEVICE_WAIT_MS was added to pci.h in commit
d5ceb9496c ("PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time
value").
Later, in commit 70a7bfb1e5 ("PCI: rockchip-host: Wait 100ms after reset
before starting configuration"), PCIE_T_RRS_READY_MS was added to pci.h.
These macros are duplicates, and represent the exact same delay in the
PCIe specification.
Since the comment above PCIE_RESET_CONFIG_WAIT_MS is strictly more correct
than the comment above PCIE_T_RRS_READY_MS, change rockchip-host to use
PCIE_RESET_CONFIG_WAIT_MS, and remove PCIE_T_RRS_READY_MS, as
rockchip-host is the only user of this macro.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Link: https://patch.msgid.link/20250625102347.1205584-11-cassel@kernel.org
ASUS store the board name in DMI_PRODUCT_NAME rather than
DMI_PRODUCT_VERSION. (Apparently it is only Lenovo that stores the
model-name in DMI_PRODUCT_VERSION.)
Use the correct DMI identifier, DMI_PRODUCT_NAME, to match the
ASUSPRO-D840SA board, such that the quirk actually gets applied.
Cc: stable@vger.kernel.org
Reported-by: Andy Yang <andyybtc79@gmail.com>
Tested-by: Andy Yang <andyybtc79@gmail.com>
Closes: https://lore.kernel.org/linux-ide/aFb3wXAwJSSJUB7o@ryzen/
Fixes: b5acc36288 ("ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard")
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250624074029.963028-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Merge the mmc fixes for v6.16-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.17.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Do not leave host with dangling ->mrq pointer if we hit
the msdc_prepare_data() error out path.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: f5de469990 ("mtk-sd: Prevent memory corruption from DMA map failure")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250625052106.584905-1-senozhatsky@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
same ID (103) was assigned to both GDC_BANK0_G_RSE_PIPE_CACHE_DATA0
and GDC_BANK0_G_RSE_PIPE_CACHE_DATA1. This could lead to incorrect
event mapping.
Updated the ID to 104 to ensure uniqueness.
Fixes: 423c336185 ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250619060502.3594350-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Make enum for capability bits of general object types depend on
the type definitions themselves.
Make sure that capabilities in the [64,127] bit range are
properly calculated (type id - 64).
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250619113721.60201-2-mbloch@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025 Thinkpads F11 key launch the Intel Unison app on Windows,
which does some sort of smart sharing between laptop and phone.
Map this key event to KEY_LINK_PHONE as the closest thing we have.
This prevents an error message being displayed on key press.
Reported-by: Damjan Georgievski <gdamjan@gmail.com>
Closes: https://sourceforge.net/p/ibm-acpi/mailman/message/59189556/
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250620181119.2519546-1-mpearson-lenovo@squebb.ca
[ij: converted directory to pre-lenovo move as this is fixes material.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a DMI quirk entry for the ASUS Zenbook Duo UX8406CA 2025 model to use
the existing zenbook duo keyboard quirk.
Signed-off-by: Rahul Chandra <rahul@chandra.net>
Link: https://lore.kernel.org/r/20250624073301.602070-1-rahul@chandra.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In the s390 defconfig, gcc-10 and earlier end up inlining three functions
into nldev_stat_get_doit(), and each of them uses some 600 bytes of stack.
The result is a function with an overly large stack frame and a warning:
drivers/infiniband/core/nldev.c:2466:1: error: the frame size of 1720 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Mark the three functions noinline_for_stack to prevent this, ensuring
that only one copy of the nlattr array is on the stack of each function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250620113335.3776965-1-arnd@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Files in the arch/s390/boot directory reuse logic from the rest of the
kernel by including certain C and assembly files from the kernel and lib
directories. Some of these included files contain EXPORT_SYMBOL directives.
For instance, arch/s390/boot/cmdline.c includes lib/cmdline.c, which
exports the get_option() function.
This inclusion triggers genksyms processing for the files in
arch/s390/boot, which is unnecessary and slows down the build.
Additionally, when KBUILD_SYMTYPES=1 is set, the generated symtypes data
contain exported symbols that are duplicated with the main kernel. This
duplication can confuse external kABI tools that process the symtypes data.
Address this issue by compiling the files in arch/s390/boot with
-D__DISABLE_EXPORTS.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250620154649.116068-1-petr.pavlu@suse.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
In order to support the complex power sequencing required by the TH1520
GPU, the AON power domain driver must be responsible for initiating the
corresponding sequencer driver. This functionality is specific to
platforms where the GPU power sequencing hardware is controlled by the
AON block.
Extend the AON power domain driver to check for the presence of the
"gpu-clkgen" reset in its own device tree node.
If the property is found, create and register a new auxiliary device.
This device acts as a proxy that allows the dedicated `pwrseq-thead-gpu`
auxiliary driver to bind and take control of the sequencing logic.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250623-apr_14_for_sending-v6-3-6583ce0f6c25@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.17.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
