During firmware download, if an error occurs, interrupts must be
disabled, synchronized, and re-enabled before retrying the download.
This change ensures proper interrupt handling to prevent race
conditions.
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a new gpu node in mt8370.dtsi to enable support for the
ARM Mali G57 MC2 GPU (Valhall-JM) found on the MT8370 SoC, using the
Panfrost driver.
On a Mediatek Genio 510 EVK board, the panfrost driver probed with the
following message:
```
panfrost 13000000.gpu: clock rate = 390000000
panfrost 13000000.gpu: mali-g57 id 0x9093 major 0x0 minor 0x0 status 0x0
panfrost 13000000.gpu: features: 00000000,000019f7, issues: 00000003,
80000400
panfrost 13000000.gpu: Features: L2:0x08130206 Shader:0x00000000
Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
panfrost 13000000.gpu: shader_present=0x5 l2_present=0x1
[drm] Initialized panfrost 1.3.0 for 13000000.gpu on minor 0
```
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-5-2833888cb1d3@collabora.com
Add a compatible for the MediaTek MT8370 SoC, with an integrated ARM
Mali G57 MC2 GPU (Valhall-JM, dual core), with new platform data for
its support in the panfrost driver.
It uses the same data as MT8186 for the power management features to
describe power supplies, pm_domains and enablement (one regulator, two
power domains) but also sets the FORCE_AARCH64_PGTABLE flag in the GPU
configuration quirks bitfield to enable AARCH64 4K page table format
mode.
As MT8186 and MT8370 SoC have different GPU architecture (Mali G52 2EE
MC2 for MT8186), making them not compatible, and this mode is only
enabled for Mediatek SoC that are Mali G57 based (compatible with
mediatek,mali-mt8188 or mediatek,mali-8192), having specific platform
data allows to set this flag for MT8370 without modifying MT8186
configuration and behaviour.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-4-2833888cb1d3@collabora.com
In the panfrost driver, the platform data of several Mediatek SoC
declares and uses several different power domains arrays according to
GPU core number present in the SoC:
- mediatek_mt8186_pm_domains (2 cores)
- mediatek_mt8183_pm_domains (3 cores)
- mediatek_mt8192_pm_domains (5 cores)
As they all are fixed arrays, starting with the same entries and the
platform data also has a power domains array length field
(num_pm_domains), they can be replaced by a single array, containing
all entries, if the num_pm_domains field of the platform data is also
set to the matching core number.
So, create a generic power domain array (mediatek_pm_domains) and use
it in the mt8183(b), mt8186, mt8188 and mt8192 platform data instead.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-3-2833888cb1d3@collabora.com
In the panfrost driver, the platform data of several Mediatek SoC
declares and uses custom supplies array definitions
(mediatek_mt8192_supplies, mediatek_mt8183_b_supplies), that are the
same as default_supplies (used by default platform data).
So drop these duplicated definitions and use default_supplies instead.
Also, rename mediatek_mt8183_supplies to a more generic name too
(legacy_supplies).
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-2-2833888cb1d3@collabora.com
Add a compatible for the MediaTek MT8370 SoC, with an
integrated ARM Mali G57 MC2 GPU (Valhall-JM, dual core).
None of the already existing SoC specific compatibles is usable as
fallback, as those either do not match the number of cores (and number
of power domains), or are for a different GPU architecture.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-1-2833888cb1d3@collabora.com
A previous fix corrected the retry condition for when to continue a
current bundle, but it missed that the current (not the total) transfer
count also applies to the buffer put. If not, then for incrementally
consumed buffer rings repeated completions on the same request may end
up over consuming.
Reported-by: Roy Tang (ErgoniaTrading) <royonia@ergonia.io>
Cc: stable@vger.kernel.org
Fixes: 3a08988123 ("io_uring/net: only retry recv bundle for a full transfer")
Link: https://github.com/axboe/liburing/issues/1423
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Syzkaller can create many uhid devices that trigger
repeated warnings like:
"hid-generic xxxx: unknown main item tag 0x0"
These messages can flood the system log, especially if a crash occurs
(e.g., with a slow UART console, leading to soft lockups). To mitigate
this, convert `hid_warn()` to use `dev_warn_ratelimited()`.
This helps reduce log noise and improves system stability under fuzzing
or faulty device scenarios.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add arch_stack_walk_reliable(), which will be used during kernel live
patching to detect when threads have completed executing old versions of
functions.
Note that arch_stack_walk_reliable() only needs to guarantee that it
returns an error code when it cannot provide a reliable stacktrace. It
is not required to provide a reliable stacktrace in all scenarios so
long as it returns said error code.
At present we can only reliably unwind up to an exception boundary. In
future we should be able to improve this with additional data from the
compiler (e.g. sframe).
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250320171559.3423224-2-song@kernel.org
[ Mark: Simplify logic, clarify commit message ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrea della Porta <andrea.porta@suse.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Song Liu <song@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250521111000.2237470-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If kretprobe_find_ret_addr() fails to find the original return address,
it returns 0. Check for this case so that a reliable stacktrace won't
silently ignore it.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrea della Porta <andrea.porta@suse.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Song Liu <song@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-and-tested-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250521111000.2237470-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To enable late module patching, livepatch modules need to be able to
apply some of their relocations well after being loaded. In this
scenario however, the livepatch module text and data is already RX-only,
so special treatment is needed to make the late relocations possible. To
do this, use the text-poking API for these late relocations.
This patch is partially based off commit 88fc078a7a ("x86/module: Use
text_poke() for late relocations").
Signed-off-by: Dylan Hatch <dylanbhatch@google.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250603223417.3700218-1-dylanbhatch@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit 0f9a1739dd ("efi: zboot specific mechanism for embedding SBAT
section") neglected to adjust the sizes of the .data section when
CONFIG_EFI_SBAT_FILE is set. As the result, the produced PE binary is
incorrect and some tools complain about it. E.g. 'sbsign' reports:
# sbsign --key my.key --cert my.crt arch/arm64/boot/vmlinuz.efi
warning: file-aligned section .data extends beyond end of file
warning: checksum areas are greater than image size. Invalid section table?
Note, '__data_size' is also used in the PE optional header and it is not
entirely clear whether .sbat needs to be accounted as part of
SizeOfInitializedData or not. As the header seems to be unused by the real
world firmware, keeping the field equal to __data_size.
Fixes: 0f9a1739dd ("efi: zboot specific mechanism for embedding SBAT section")
Reported-by: Heinrich Schuchardt <heinrich.schuchardt@gmx.de>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The `separate_colour_plane_flag` element is only present in the SPS if
`chroma_format_idc == 3`, so the corresponding flag should be disabled
whenever that is not the case and not just on profiles where
`chroma_format_idc` is not present.
Fixes: b32e48503d ("media: controls: Validate H264 stateless controls")
Signed-off-by: James Cowgill <james.cowgill@blaize.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add compatible strings "nxp,imx95-jpgdec" and "nxp,imx95-jpgenc", which
are backward compatible with "nxp,imx8qxp-jpgdec" and
"nxp,imx8qxp-jpegenc". i.MX95 just need one power domain which combine
wrap and all slots together. Reduce minItems of power-domains to 1 for
i.MX95 and keep the same restriction for others.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The 'used' and 'new' bitmaps are local to this function, so there is no
need to use atomic access because concurrency can not happen.
Use the non-atomic __set_bit() to save a few cycles.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add video_device_release() in label 'err_m2m' to release the memory
allocated by video_device_alloc() and prevent potential memory leaks.
Remove the reduntant code in label 'err_m2m'.
Fixes: a8ef0488cc ("media: imx: add csc/scaler mem2mem device")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
On errors, the rkvdec chip self resets. This can clear the addresses
programmed in the iommu. This case is signaled by the
RKVDEC_SOFTRESET_RDY status bit.
Since the iommu framework does not have a restore functionality, and
as recommended by the iommu subsystem maintainers, this patch
restores the iommu programming by attaching and detaching an empty
domain, which will clear and restore the default domain.
Suggested-by: Detlev Casanova <detlev.casanova@collabora.com>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The desired clock frequency was correctly set to 400MHz in the device tree
but was lowered by the driver to 300MHz breaking 4K 60Hz content playback.
Fix the issue by removing the driver call to clk_set_rate(), which reduce
the amount of board specific code.
Fixes: 003afda97c ("media: verisilicon: Enable AV1 decoder on rk3588")
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
If VPU supports untiled output, it actually supports several different
YUV 4:2:0 layouts, namely NV12, NV21, YUV420 and YVU420.
Add support for all of them.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: add 'default' case to switch to fix warning with old compiler]
SDCA (SoundWire Device Class for Audio) uses HID to convey
input events from peripheral devices. Add a bus define for the
SoundWire bus to prepare support for this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250616114907.855452-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for parsing the HIDE entity descriptor and HID descriptor/report
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250616114820.855401-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert fsl-vdoa.txt to yaml format.
Additional changes:
- Add irq.h and imx6qdl-clock.h in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Applications may set data_offset when it refers to an output queue. So
driver need to account for it when getting the start address of input
image in the plane.
Meanwhile the mxc-jpeg codec requires the address (plane address +
data_offset) to be 16-aligned.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For format H264 and HEVC, the firmware can report the parsed profile idc
and level idc to driver, these information may be useful.
Implement the H264 and HEVC profile and level control to report them.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The Haikou Video Demo adapter has a proprietary connector for a camera
module which has an OV5675 camera sensor and a companion DW9714 focus
lens driver.
This adds support for the camera module on PX30 Ringneck module fitted
on a Haikou devkit with the Haikou Video Demo adapter.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-3-de1bf87e0732@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This will make it slightly easier for Device Trees (and Overlays) to
link the ISP controller to a video input such as a CSI camera while also
bringing it closer to what's been done already for the DSI controller.
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-2-de1bf87e0732@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
dtc complains with the following message for DTSes which use the ISP:
arch/arm64/boot/dts/rockchip/px30.dtsi:1272.19-1276.6: Warning (graph_child_address): /isp@ff4a0000/ports/port@0: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
Typically, it is expected from the device DTS(I) to update the SoC DTSI
nodes if they have more than one endpoint, so let's assume there's only
one endpoint in port@0 by default, instead of forcing board DTS(I)s to
/delete-property/ address-cells and size-cells to make dtc happy.
Because PX30 PP1516/EVB's endpoint@0 is the only endpoint and
considering its parent node now has no address-cells property, dtc
complains (same messages for PX30 EVB):
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (avoid_default_addr_size): /isp@ff4a0000/ports/port@0/endpoint@0: Relying on default #address-cells value
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (avoid_default_addr_size): /isp@ff4a0000/ports/port@0/endpoint@0: Relying on default #size-cells value
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (graph_endpoint): /isp@ff4a0000/ports/port@0/endpoint@0: graph node '#address-cells' is -1, must be 1
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (graph_endpoint): /isp@ff4a0000/ports/port@0/endpoint@0: graph node '#size-cells' is -1, must be 0
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (graph_child_address): Failed prerequisite 'graph_endpoint'
so we fix that by removing the reg property. dtc still complains (same
messages for PX30 EVB):
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-450.6: Warning (unit_address_vs_reg): /isp@ff4a0000/ports/port@0/endpoint@0: node has a unit name, but no reg or ranges property
so we also remove the @0 suffix off the node name.
Fixes: 8df7b4537d ("arm64: dts: rockchip: add isp node for px30")
Fixes: 474a77395b ("arm64: dts: rockchip: hook up camera on px30-evb")
Fixes: 56198acdbf ("arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-1-de1bf87e0732@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The series harmonizes the debug prints for pipeline state changes.
Currently we only print readable state change for single pipeline
changes but when multiple pipeline's state is changed, it is omitted.
Use human readable information in both cases in a harmonized way to aid
debugging.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The firmware will be able to only save and restore the context related to
library management.
This means that even without a full context save, the libraries do not
need to be re-loaded to the firmware after second or consecutive boots.
This is reported via the FW_READY notification, where BIT(15) indicates:
0 - the library restore is not done
1 - library restore is done
This bit is only valid if full context save is not enabled, full context
save is by definition saves and restores the library related book-keeping
as well.
Add a new flag to tell the platform code if the libraries have been
restored, no need to reload them after boot.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
There are devices where the iDisp HDA codec for HDMI is disconnected
and it is not present on the HDA bus.
This usually happens on systems with dGPU, but not limited to them.
How SOF tried to deal with this is to drop in a dummy codec in place of
the iDisp to allow the topology to be loaded, but these PCM devices are
unusable, they fail when user tries to use them.
PA/PW is probing the PCM devices on probe and that causes the kernel log
to fill up with errors, which is harmless but disturbing.
This series will use the filter function to prevent the creation of the
HDMI PCM devices in the first place (like HDA legacy stack will not
present HDMI devices if the codec is not visible).
The topology still loads, we still use dummy codec to satisfy it, but
there will be no dummy PCM devices created.
The first two patch handles the same issue that was discovered by the
ignored link: a NULL dereference.
I'm not sure if both is needed, but I felt that fixing it in one place
and leaving the other open might not be future proof.
If I would to pick one, I would likely go with the patch for the
soc-core.
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250610-gpiochip-set-rv-ssb-v1-1-0bee5b45b411@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Don't populate the read-only array cfg_offset on the stack at run time,
instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250619082554.1834654-1-colin.i.king@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since secs_to_jiffies()(commit:b35108a51cf7) has been introduced, we can
use it to avoid scaling the time to msec.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Link: https://patch.msgid.link/20250613102624.3077418-1-liyuesong@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since secs_to_jiffies()(commit:b35108a51cf7) has been introduced, we can
use it to avoid scaling the time to msec.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20250612021446.3465972-1-liyuesong@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the case of SME-in-driver, the driver can internally choose to
update the links based on the AP MLD recommendation and do link
reconfiguration negotiation with AP MLD.
(e.g., After the driver processing the BSS Transition Management request
frame received from the AP MLD with Neighbor Report containing
Multi-Link element with recommended links information chooses to do link
reconfiguration negotiation with AP MLD).
To support this, extend cfg80211_mlo_reconf_add_done() and
NL80211_CMD_ASSOC_MLO_RECONF to indicate added links information for
driver-initiated link reconfiguration requests. For removed links,
the driver indicates links information using the
NL80211_CMD_LINKS_REMOVED event for driver-initiated cases, the same as
supplicant initiated cases.
For the driver-initiated case, cfg80211 will receive link
reconfiguration result asynchronously from driver so holding BSSes of
the accepted add links is needed in the event path. Also, no need of
unhold call for the rejected add link BSSes since there was no hold call
happened previously.
Once the supplicant receives the NL80211_CMD_ASSOC_MLO_RECONF event,
it needs to process the information about newly added links and install
per-link group keys (e.g., GTK/IGTK/BIGTK etc.).
In case of the SME-in-driver, using a vendor interface etc. to notify
the supplicant to initiate a link reconfiguration request and then
supplicant sending command to the cfg80211 can lead to race conditions.
The correct design to avoid this is that the driver indicates the
cfg80211 directly with the results of the link reconfiguration
negotiation.
Signed-off-by: Kavita Kavita <quic_kkavita@quicinc.com>
Link: https://patch.msgid.link/20250604105757.2542-3-quic_kkavita@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The existing documentation for the NL80211_CMD_ASSOC_MLO_RECONF
does not clearly explain handling of link reconfiguration request
results from the driver.
Add documentation to explain that the command is used as an event to
notify userspace about added links information, and that the existing
NL80211_CMD_LINKS_REMOVED command is used to notify userspace about
removed links information.
Signed-off-by: Kavita Kavita <quic_kkavita@quicinc.com>
Link: https://patch.msgid.link/20250604105757.2542-2-quic_kkavita@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in ieee80211_assign_beacon() mbssid count is updated as link's
bssid_indicator. mbssid count is the total number of MBSSID elements in
the beacon instead of Max BSSID indicator of the Multiple BSS set.
This will result in drivers obtaining an invalid bssid_indicator for BSSes
in a Multiple BSS set.
Fix this by updating link's bssid_indicator from MBSSID element for
Transmitting BSS and update the same for all of its Non-Transmitting BSSes.
Fixes: dde78aa520 ("mac80211: update bssid_indicator in ieee80211_assign_beacon")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20250530040940.3188537-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in multi-radio wiphy cases, if one radio is operating on a DFS
channel, -EBUSY is returned even when a scan is requested on a different
radio. Because of this, an MLD AP with one radio (link) on a DFS channel
and Automatic Channel Selection (ACS) on another radio (link) cannot be
brought up.
In multi-radio wiphy cases, multiple radios are grouped under a single
wiphy. Hence, if a radio is operating on a DFS channel and a scan is
requested on a different radio of the same wiphy, the scan can be allowed
simultaneously without impacting the DFS operations.
Add logic to check the underlying radio used for the requested scan. If the
radio on which DFS is already running is not being used, allow the scan
operation; otherwise, return -EBUSY.
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-3-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in multi-radio wiphy cases, if a scan is ongoing on one radio,
-EBUSY is returned when DFS or a channel switch is initiated on another
radio. Because of this, an MLD AP with one radio (link) in an ongoing scan
cannot initiate DFS or a channel switch on another radio (link).
In multi-radio wiphy cases, multiple radios are grouped under a single
wiphy. Hence, if a scan is ongoing on one underlying radio and DFS or a
channel switch is requested on a different underlying radio of the same
wiphy, these operations can be allowed simultaneously.
Add logic to check the underlying radio used for the ongoing scan. If the
radio on which DFS or a channel switch is requested is not being used for
the scan, allow the operation; otherwise, return -EBUSY.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-2-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add utility API cfg80211_get_radio_idx_by_chan() to retrieve the radio
index corresponding to a given channel in a multi-radio wiphy.
This utility function can be used when we want to check the radio-specific
data for a channel in a multi-radio wiphy. For example, it can help
determine the radio index required to handle a scan request. This index
can then be used to decide whether the scan can proceed without
interfering with ongoing DFS operations on another radio.
Signed-off-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-1-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers that support Tx power insertion could examine the outgoing Radio
measurement packet and depending on the packet type, the driver can
insert specific data fields in it. These action field values will help
drivers classify the action code within the Radio Measurement action
packet.
These action fields are defined in IEEE 802.11-2024 - Table 9-470, Radio
Measurement Action field values.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-add_rrm_action_code-v1-1-6b7c78b5bbaf@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Limit rate_idx to IL_LAST_OFDM_RATE for 5GHz band for thinkable case
the index is incorrect.
Reported-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reported-by: Alexei Safin <a.safin@rosa.ru>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20250525144524.GA172583@wp.pl
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The dev_hold() on skb->dev during packet reception was originally
added to prevent the device from being released prematurely during
asynchronous decryption operations.
As current hardware can offload decryption, this asynchronous path is
not always utilized. This often results in a pattern of dev_hold()
immediately followed by dev_put() for each packet, creating
unnecessary reference counting overhead detrimental to performance.
This patch optimizes this by skipping the dev_hold() and subsequent
dev_put() when asynchronous decryption is not being performed.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Positivo P15X is equipped with ALC269VC, and needs a fix to make
the headset mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250619191215.17203-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A relatively large collection of fixes and updates that came in since
the merge window. Of note are a couple of Cirrus ones which change the
firmware naming for some newly added devices, and a fix from Laurentiu
for issues booting firmwares on the DSPs on i.MX8 SoCs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhUnx0ACgkQJNaLcl1U
h9DKOAf/a73xsodyviWnmovKP9wMXbgQB0u7ubMDdkJm7HX91UEfIeh2kmfRhJtL
Hc/C0gHjOK15s+TgFR4zuO5Oeb63Ok+nY+YF7TlFQ0OPR/BvAIALpQUwlW/EgVgC
l+O9HJBysjNBtVf2aQTRvbs59kpoV1q31Ys5pGRN0nrUAvnrtosMtO3Py8UyS4Oy
4XcMUxnu67+8LVinOXV2X8lmztCm2dsX2Z9pnsxvncCFkxWJpDcr0EhUo24LOR1E
vDl7rAuI6fetUU8kHM7Noe7nyxa/4yiL6i5W/LWAfpCZiBkEdNU4WOVPRjBqXcY2
GfRYJkEbi7JoWWhMhdmLxYnobFKCiA==
=RZgv
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.16-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A relatively large collection of fixes and updates that came in since
the merge window. Of note are a couple of Cirrus ones which change the
firmware naming for some newly added devices, and a fix from Laurentiu
for issues booting firmwares on the DSPs on i.MX8 SoCs.
