When a module gets unloaded it checks whether any of its tags are still in
use and if so, we keep the memory containing module's allocation tags
alive until all tags are unused. However percpu counters referenced by
the tags are freed by free_module(). This will lead to UAF if the memory
allocated by a module is accessed after module was unloaded.
To fix this we allocate percpu counters for module allocation tags
dynamically and we keep it alive for tags which are still in use after
module unloading. This also removes the requirement of a larger
PERCPU_MODULE_RESERVE when memory allocation profiling is enabled because
percpu memory for counters does not need to be reserved anymore.
Link: https://lkml.kernel.org/r/20250517000739.5930-1-surenb@google.com
Fixes: 0db6f8d782 ("alloc_tag: load module tags into separate contiguous memory")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/all/20250516131246.6244-1-00107082@163.com/
Tested-by: David Wang <00107082@163.com>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When module load fails after memory for codetag section is ready, codetag
section memory will not be properly released. This causes memory leak,
and if next module load happens to get the same module address, codetag
may pick the uninitialized section when manipulating tags during module
unload, and leads to "unable to handle page fault" BUG.
Link: https://lkml.kernel.org/r/20250519163823.7540-1-00107082@163.com
Fixes: 0db6f8d782 ("alloc_tag: load module tags into separate contiguous memory")
Closes: https://lore.kernel.org/all/20250516131246.6244-1-00107082@163.com/
Signed-off-by: David Wang <00107082@163.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pratyush Yadav reports the following crash:
------------[ cut here ]------------
kernel BUG at arch/x86/mm/physaddr.c:23!
ception 0x06 IP 10:ffffffff812ebbf8 error 0 cr2 0xffff88903ffff000
CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc6+ #231 PREEMPT(undef)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:__phys_addr+0x58/0x60
Code: 01 48 89 c2 48 d3 ea 48 85 d2 75 05 e9 91 52 cf 00 0f 0b 48 3d ff ff ff 1f 77 0f 48 8b 05 20 54 55 01 48 01 d0 e9 78 52 cf 00 <0f> 0b 90 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0000:ffffffff82803dd8 EFLAGS: 00010006 ORIG_RAX: 0000000000000000
RAX: 000000007fffffff RBX: 00000000ffffffff RCX: 0000000000000000
RDX: 000000007fffffff RSI: 0000000280000000 RDI: ffffffffffffffff
RBP: ffffffff82803e68 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff83153180 R11: ffffffff82803e48 R12: ffffffff83c9aed0
R13: 0000000000000000 R14: 0000001040000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:0000000000000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88903ffff000 CR3: 0000000002838000 CR4: 00000000000000b0
Call Trace:
<TASK>
? __cma_declare_contiguous_nid+0x6e/0x340
? cma_declare_contiguous_nid+0x33/0x70
? dma_contiguous_reserve_area+0x2f/0x70
? setup_arch+0x6f1/0x870
? start_kernel+0x52/0x4b0
? x86_64_start_reservations+0x29/0x30
? x86_64_start_kernel+0x7c/0x80
? common_startup_64+0x13e/0x141
The reason is that __cma_declare_contiguous_nid() does:
highmem_start = __pa(high_memory - 1) + 1;
If dma_contiguous_reserve_area() (or any other CMA declaration) is
called before free_area_init(), high_memory is uninitialized. Without
CONFIG_DEBUG_VIRTUAL, it will likely work but use the wrong value for
highmem_start.
The issue occurs because commit e120d1bc12 ("arch, mm: set high_memory
in free_area_init()") moved initialization of high_memory after the call
to dma_contiguous_reserve() -> __cma_declare_contiguous_nid() on several
architectures.
In the case CONFIG_HIGHMEM is enabled, some architectures that actually
support HIGHMEM (arm, powerpc and x86) have initialization of high_memory
before a possible call to __cma_declare_contiguous_nid() and some
initialized high_memory late anyway (arc, csky, microblase, mips, sparc,
xtensa) even before the commit e120d1bc12 so they are fine with using
uninitialized value of high_memory.
And in the case CONFIG_HIGHMEM is disabled high_memory essentially becomes
the first address after memory end, so instead of relying on high_memory
to calculate highmem_start use memblock_end_of_DRAM() and eliminate the
dependency of CMA area creation on high_memory in majority of
configurations.
Link: https://lkml.kernel.org/r/20250519171805.1288393-1-rppt@kernel.org
Fixes: e120d1bc12 ("arch, mm: set high_memory in free_area_init()")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Do a bit of readability spring cleaning:
- Fix misaligned structure member in perf_addr_filter: the new
struct perf_addr_filter::action member was too long, but when
it was added it was not aligned properly. Align all fields to
the customary column 41 alignment of most of the rest of the
header.
- Adjust the vertical alignment of the definition of other
structures and definitions as well, so that the 'most of' in
the previous paragraph changes to 'all of'. ;-)
- Prettify the assignments in perf_clear_branch_entry_bitfields()
- Move comments from CPP definitions to outside the macro
- Move perf_guest_info_callbacks and related defines from the front
of the header closer to where it's used within the header.
- And more #endif markers for larger CPP blocks and standardize
#if/#else/#endif blocks to the following nomenclature:
#ifdef CONFIG_FOO
...
#else /* !CONFIG_FOO: */
...
#endif /* !CONFIG_FOO */
- Standardize on consistently using the 'extern' storage class where
appropriate, we had cases where method prototypes sometimes omitted
the storage class:
extern void perf_pmu_migrate_context(struct pmu *pmu,
int src_cpu, int dst_cpu);
int perf_event_read_local(struct perf_event *event, u64 *value,
u64 *enabled, u64 *running);
extern u64 perf_event_read_value(struct perf_event *event,
u64 *enabled, u64 *running);
Which is obviously a bit confusing and adds unnecessary noise.
- s/__u64/u64 and similar cleanups: there's no point in using __u64
in non-UAPI headers, and doing so only adds unnecessary visual noise.
- Harmonize all multi-parameter function prototypes along the following
style:
extern struct perf_event *
perf_event_create_kernel_counter(struct perf_event_attr *attr,
int cpu,
struct task_struct *task,
perf_overflow_handler_t callback,
void *context);
- etc.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Repair code will do updates on older snapshot versions, so needs the
correct annotation.
Reported-by: syzbot+42581416dba62b364750@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If we're doing a reflink copy of existing reflinked data, we may only
set REFLINK_P_MAY_UPDATE_OPTIONS if it was set on the reflink pointer
we're copying from.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- even more Xbox controllers added to xpad driver: Turtle Beach Recon
Wired Controller, Turtle Beach Stealth Ultra, and PowerA Wired
Controller
- a fix to Synaptics RMI driver to not crash if controller reports
unsupported version of F34 (firmware flash) function.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaDJzrQAKCRBAj56VGEWX
nJLwAP4zeNCtEIMex8lAmVcLe9smcHuin+kEAKeIwTY3Y3VhKgD9G46WKFz2Ft3A
Zc1CVi333GiMNlt0iiW+n+oQAYRPHAk=
=X3Z5
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- even more Xbox controllers added to xpad driver: Turtle Beach Recon
Wired Controller, Turtle Beach Stealth Ultra, and PowerA Wired
Controller
- a fix to Synaptics RMI driver to not crash if controller reports
unsupported version of F34 (firmware flash) function
* tag 'input-for-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi - fix crash with unsupported versions of F34
Input: xpad - add more controllers
A few final fixes for v6.15, some driver fixes for the Freescale DSPI
driver pulled over from their vendor code and another instance of the
fixes Greg has been sending throughout the kernel for constification of
the bus_type in driver core match() functions.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgySG0ACgkQJNaLcl1U
h9ClEQf/ViohgWBL0RLAsPdqyfTvSvhLS87V5ze4LWRmzNSYkwUQcGx0fx3QjRCl
ekZyzHUUzsFY/6yHlgZ8KaP2kgHBtuNc4l4Kefpnmen6GFCOsFjaw6X/3WHkxmLN
kJOuMjNr4p4he1X0tUE5yZfAqWs2QdsZ91unfx8DejvHV0nzlaqjCp0yaJQEcnAx
KPx1pkC9Lj9F+SPh2hs2bJeHLkIUmyj6ZRbqhQk4BYGdKTiGpAo7FclmVDjWiztZ
uWZ3Auzsyd6d0z74RkR95SZHQFmwABzvYoz7/LtMw0QK6MCDq6FAlVuYAi7Rc6OJ
GkmS9ERJsEGdflfDg0JMYG1wTtiawQ==
=7jIv
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few final fixes for v6.15, some driver fixes for the Freescale DSPI
driver pulled over from their vendor code and another instance of the
fixes Greg has been sending throughout the kernel for constification
of the bus_type in driver core match() functions"
* tag 'spi-fix-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-dspi: Reset SR flags before sending a new message
spi: spi-fsl-dspi: Halt the module after a new message transfer
spi: spi-fsl-dspi: restrict register range for regmap access
spi: use container_of_cont() for to_spi_device()
When an application sets and enables an alarm on Loongson RTC devices,
the alarm notification fails to propagate to userspace because the
ACPI event handler omits calling rtc_update_irq().
As a result, processes waiting via select() or poll() on RTC device
files fail to receive alarm notifications.
The ACPI interrupt is also triggered multiple times. In loongson_rtc_handler,
we need to clear TOY_MATCH0_REG to resolve this issue.
Fixes: 09471d8f5b ("rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr()")
Fixes: 1b733a9ebc ("rtc: Add rtc driver for the Loongson family chips")
Signed-off-by: Liu Dalin <liudalin@kylinsec.com.cn>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20250509084416.7979-1-liudalin@kylinsec.com.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Implement the RTC driver for CV1800, which able to provide time alarm.
Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250507195626.502240-1-alexander.sverdlin@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 4e64350f42 ("rtc: add STM32 RTC driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-8-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only support OF probe so drop the unused platform module
alias.
Fixes: ae05c95074 ("rtc: s3c: add s3c_rtc_data structure to use variant data instead of s3c_cpu_type")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Fixes: 0d297df038 ("ARM: s3c: simplify platform code")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-7-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 5a418558cd ("rtc: pm8xxx: add support for devicetree")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-6-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 24e1f2c938 ("rtc: ingenic: Only support probing from devicetree")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20250423130318.31244-5-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 80ca3277bc ("rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-4-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only supports OF probe so drop the unused platform module
alias.
Fixes: dd3bf50b35 ("rtc: cpcap: new rtc driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250423130318.31244-3-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 288d9cf176 ("rtc: at91rm9200: use of_device_get_match_data()")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-2-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which a
driver can take into account.
On platforms where the offset is stored in a Qualcomm specific UEFI
variable the variables are also accessed in a non-standard way, which
means that the OS cannot assume that the variable service is available
by the time the driver probes.
Use the new 'qcom,uefi-rtc-info' property to determine whether to probe
defer until the UEFI offset becomes available so that the offset can be
used also when the RTC driver is built in or when a dependency of the
UEFI variable driver is built as a module (e.g. the driver for the SCM
interconnects).
Fixes: bba38b8748 ("rtc: pm8xxx: add support for uefi offset")
Reported-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/lkml/CAF6AEGsfke=x0p1b2-uNX6DuQfRyEjVbJaxTbVLDT2YvSkGJbg@mail.gmail.com/
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250423075143.11157-3-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which a
driver can take into account.
On platforms where the offset is stored in a Qualcomm specific UEFI
variable the variables are also accessed in a non-standard way, which
means that the OS cannot assume that the variable service is available
by the time the RTC driver probes.
Add a 'qcom,uefi-rtc-info' boolean flag to indicate that the RTC offset
is stored in a Qualcomm specific UEFI variable so that the OS can
determine whether to wait for it to become available.
The UEFI variable is
882f8c2b-9646-435f-8de5-f208ff80c1bd-RTCInfo
and holds a 12-byte structure where the first four bytes is a GPS time
offset in little-endian byte order.
Link: https://lore.kernel.org/all/aAecIkgmTTlThKEZ@hovoldconsulting.com/
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250423075143.11157-2-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Enabling the compile test should not cause automatic enabling of all
drivers, but only allow to choose to compile them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250417074640.81363-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The Kconfig file for controller drivers is only sourced if the I3C
symbol is enabled. No need to check for that in individual drivers.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250506075247.1545-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use the clk_bulk API to handle clocks, so the code can support different
numbers of clocks more easily. Make the code cleaner and more flexible.
No change in functionality.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250427083230.3325700-3-carlos.song@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add compatible string "nxp,imx94-i3c" and "nxp,imx95-i3c" for the i.MX94
chip and i.MX95 chip. Backward is compatible with "silvaco,i3c-master-v1".
Also i.MX94 and i.MX95 I3C only need two clocks and Legacy I3C needs
three clocks. So add restrictions for clock and clock-names properties
for different Socs.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250427083230.3325700-2-carlos.song@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add an entry for 'fsl,imx8qm-sc-wdt' as imx8qm also contains the SCU
watchdog block.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250414-imx8qm-watchdog-v2-1-449265a9da4e@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The S32 platform has several Watchdog Timer available and tied with a
CPU. The SWT0 is the only one which directly asserts the reset line,
other SWT require an external setup to configure the reset behavior
which is not part of this change.
As a side note, in the NXP documentation, the s32g2 and s32g3
reference manuals refer the watchdog as the 'Software Timer Watchdog'
where the name can be misleading as it is actually a hardware
watchdog.
The maximum watchdog timeout value depends on the clock feeding the
SWT counter which is 32bits wide. On the s32g274-rb2, the clock has a
rate of 51MHz which result on 83 seconds maximum timeout.
The timeout can be specified via the device tree with the usual
existing bindings 'timeout-sec' or via the module param timeout.
The watchdog can be loaded with the 'nowayout' option, preventing the
watchdog to be stopped.
The watchdog can be started at boot time with the 'early-enable'
option, thus letting the watchdog framework to service the watchdog
counter.
The watchdog support the magic character to stop when the userspace
releases the device.
Cc: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Cc: Thomas Fossati <thomas.fossati@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Alexandru-Catalin Ionita <alexandru-catalin.ionita@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250410082616.1855860-3-daniel.lezcano@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Correct kerneldoc syntax or drop kerneldoc entirely for function
comments not being kerneldoc to fix warnings like:
pretimeout_noop.c:19: warning: Function parameter or struct member 'wdd' not described in 'pretimeout_noop'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250406203531.61322-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Device can be unbound or probe can fail, so driver must also release
memory for the wakeup source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250406203531.61322-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Enabling the compile test should not cause automatic enabling of all
drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250404123941.362620-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for on-stack definitions of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/watchdog/cros_ec_wdt.c:29:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/Z-WG6_uhWsy_FCq3@kspp
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
We have to wait at least the minimium time for the watchdog window
(TWDMIN) before writings to the wdt register after the
watchdog is activated.
Otherwise the chip will assert TWD_ERROR and power down to reset mode.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-4-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If the watchog is started by the bootloader, we do not want the watchdog
to be disabled.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-3-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Introduce the `timeout` module parameter and pass it to
watchdog_init_timeout(). If the parameter is not set or contains an
invalid value, fallback on the `timeout-secs` devicetree property value.
If none of the above is valid, go for the old default value.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-2-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The test might fail on the Arm64 platform with the error:
# perf test -vvv "Track with sched_switch"
Missing sched_switch events
#
The issue is caused by incorrect handling of timestamp comparisons. The
comparison result, a signed 64-bit value, was being directly cast to an
int, leading to incorrect sorting for sched events.
The case does not fail everytime, usually I can trigger the failure
after run 20 ~ 30 times:
# while true; do perf test "Track with sched_switch"; done
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
I used cross compiler to build Perf tool on my host machine and tested on
Debian / Juno board. Generally, I think this issue is not very specific
to GCC versions. As both internal CI and my local env can reproduce the
issue.
My Host Build compiler:
# aarch64-linux-gnu-gcc --version
aarch64-linux-gnu-gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0
Juno Board:
# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 12 (bookworm)
Release: 12
Codename: bookworm
Fix this by explicitly returning 0, 1, or -1 based on whether the result
is zero, positive, or negative.
Fixes: d44bc55829 ("perf tests: Add a test for tracking with sched_switch")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250331172759.115604-1-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The LCD controller (LCDC) on the RZ/V2H(P) SoC is composed of Frame
Compression Processor (FCPVD), Video Signal Processor (VSPD), and
Display Unit (DU).
There is one LCDC unit available on the RZ/V2H(P) SoC which is connected
to the DSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250512182330.238259-3-prabhakar.mahadev-lad.rj@bp.renesas.com
The DU block on the RZ/V2H(P) SoC is identical to the one found on the
RZ/G2L SoC. However, it only supports the DSI interface, whereas the
RZ/G2L supports both DSI and DPI interfaces.
Due to this difference, a SoC-specific compatible string
'renesas,r9a09g057-du' is added for the RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250512182330.238259-2-prabhakar.mahadev-lad.rj@bp.renesas.com
When drm_panel.prepare_prev_first is set to true in a panel driver, the
panel expects the MIPI DSI hardware to be already configured before the
panel's prepare function is called because it might need to send DCS
commands.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Tested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250521210335.3149065-1-chris.brandt@renesas.com
Adds compatible for STM32MP25 SoC and enables respective encoder
capability for stm32-timer-cnt. Implements watch_validate callback for
microchip-tcb-capture.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCaDBvtAAKCRC1SFbKvhIj
K03PAP46u3SlttQbm2AqzEOMxNSX68a8Ll36BBGLniYsjgxnCgD9HvAlXt0IRE9V
4rmnq/Hdvlx2Ib7sts6/lVcq/Db7AQY=
=9ov0
-----END PGP SIGNATURE-----
Merge tag 'counter-updates-for-6.16b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
Second set of Counter updates for 6.16
Adds compatible for STM32MP25 SoC and enables respective encoder
capability for stm32-timer-cnt. Implements watch_validate callback for
microchip-tcb-capture.
* tag 'counter-updates-for-6.16b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: microchip-tcb-capture: Add watch validation support
counter: stm32-timer-cnt: add support for stm32mp25
