The hyperv-pci driver uses ACPI for MSI IRQ domain configuration on
arm64. It won't be able to do that in the VTL mode where only DeviceTree
can be used.
Update the hyperv-pci driver to get vPCI MSI IRQ domain in the DeviceTree
case, too.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250428210742.435282-12-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-12-romank@linux.microsoft.com>
Using acpi_irq_create_hierarchy() in the cases where the code
also handles OF leads to code duplication as the ACPI subsystem
doesn't provide means to compute the IRQ domain parent whereas
the OF does.
Introduce acpi_get_gsi_dispatcher() so that the drivers relying
on both ACPI and OF may use irq_domain_create_hierarchy() in the
common code paths.
No functional changes.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250428210742.435282-11-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-11-romank@linux.microsoft.com>
The ARM64 PCI code for hyperv needs to know the VMBus root
device, and it is private.
Provide a function that returns it. Rename it from "hv_dev"
as "hv_dev" as a symbol is very overloaded. No functional
changes.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250428210742.435282-10-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-10-romank@linux.microsoft.com>
The VMBus driver uses ACPI for interrupt assignment on
arm64 hence it won't function in the VTL mode where only
DeviceTree can be used.
Update the VMBus driver to discover interrupt configuration
from DT.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250428210742.435282-9-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-9-romank@linux.microsoft.com>
To boot in the VTL mode, VMBus on arm64 needs interrupt description
which the binding documentation lacks. The transactions on the bus are
DMA coherent which is not mentioned as well.
Add the interrupt property and the DMA coherence property to the VMBus
binding. Update the example to match that. Fix typos.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250428210742.435282-8-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-8-romank@linux.microsoft.com>
The hyperv guest code might run in various Virtual Trust Levels.
Report the level when the kernel boots in the non-default (0)
one.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250428210742.435282-7-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-7-romank@linux.microsoft.com>
Various parts of the hyperv code need to know what VTL
the kernel runs at, most notably VMBus needs that to
establish communication with the host.
Initialize the Virtual Trust Level field to enable
booting in the Virtual Trust Level.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250428210742.435282-6-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-6-romank@linux.microsoft.com>
To run in the VTL mode, Hyper-V drivers have to know what
VTL the system boots in, and the arm64/hyperv code does not
have the means to compute that.
Refactor the code to hoist the function that detects VTL,
make it arch-neutral to be able to employ it to get the VTL
on arm64.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/20250428210742.435282-5-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-5-romank@linux.microsoft.com>
Kconfig dependencies for arm64 guests on Hyper-V require that be
ACPI enabled, and limit VTL mode to x86/x64. To enable VTL mode
on arm64 as well, update the dependencies. Since VTL mode requires
DeviceTree instead of ACPI, don’t require arm64 guests on Hyper-V
to have ACPI unconditionally.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250428210742.435282-4-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-4-romank@linux.microsoft.com>
The arm64 Hyper-V startup path relies on ACPI to detect
running under a Hyper-V compatible hypervisor. That
doesn't work on non-ACPI systems.
Hoist the ACPI detection logic into a separate function. Then
use the vendor-specific hypervisor service call (implemented
recently in Hyper-V) via SMCCC in the non-ACPI case.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250428210742.435282-3-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-3-romank@linux.microsoft.com>
The KVM/arm64 uses SMCCC to detect hypervisor presence. That code is
private, and it follows the SMCCC specification. Other existing and
emerging hypervisor guest implementations can and should use that
standard approach as well.
Factor out a common infrastructure that the guests can use, update KVM
to employ the new API. The central notion of the SMCCC method is the
UUID of the hypervisor, and the new API follows that.
No functional changes. Validated with a KVM/arm64 guest.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250428210742.435282-2-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-2-romank@linux.microsoft.com>
Allow the KVP daemon to log the KVP updates triggered in the VM
with a new debug flag(-d).
When the daemon is started with this flag, it logs updates and debug
information in syslog with loglevel LOG_DEBUG. This information comes
in handy for debugging issues where the key-value pairs for certain
pools show mismatch/incorrect values.
The distro-vendors can further consume these changes and modify the
respective service files to redirect the logs to specific files as
needed.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1744715978-8185-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1744715978-8185-1-git-send-email-shradhagupta@linux.microsoft.com>
Allow userspace to read/write log ratelimits per device (including
enable/disable). Create aer/ sysfs directory to store them and any
future AER configs.
The new sysfs files are:
/sys/bus/pci/devices/*/aer/correctable_ratelimit_burst
/sys/bus/pci/devices/*/aer/correctable_ratelimit_interval_ms
/sys/bus/pci/devices/*/aer/nonfatal_ratelimit_burst
/sys/bus/pci/devices/*/aer/nonfatal_ratelimit_interval_ms
The default values are ratelimit_burst=10, ratelimit_interval_ms=5000, so
if we try to emit more than 10 messages in a 5 second period, some are
suppressed.
Update AER sysfs ABI filename to reflect the broader scope of AER sysfs
attributes (e.g. stats and ratelimits).
Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats ->
sysfs-bus-pci-devices-aer
Tested using aer-inject[1]. Configured correctable log ratelimit to 5.
Sent 6 AER errors. Observed 5 errors logged while AER stats
(cat /sys/bus/pci/devices/<dev>/aer_dev_correctable) shows 6.
Disabled ratelimiting and sent 6 more AER errors. Observed all 6 errors
logged and accounted in AER stats (12 total errors).
[1] https://git.kernel.org/pub/scm/linux/kernel/git/gong.chen/aer-inject.git
[bhelgaas: note fatal errors are not ratelimited, "aer_report" ->
"aer_info", replace ratelimit_log_enable toggle with *_ratelimit_interval_ms]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-21-helgaas@kernel.org
Spammy devices can flood kernel logs with AER errors and slow/stall
execution. Add per-device ratelimits for AER correctable and non-fatal
uncorrectable errors that use the kernel defaults (10 per 5s). Logging of
fatal errors is not ratelimited.
There are two AER logging entry points:
- aer_print_error() is used by DPC and native AER
- pci_print_aer() is used by GHES and CXL
The native AER aer_print_error() case includes a loop that may log details
from multiple devices, which are ratelimited individually. If we log
details for any device, we also log the Error Source ID from the Root Port
or RCEC.
If no such device details are found, we still log the Error Source from the
ERR_* Message, ratelimited by the Root Port or RCEC that received it.
The DPC aer_print_error() case is not ratelimited, since this only happens
for fatal errors.
The CXL pci_print_aer() case is ratelimited by the Error Source device.
The GHES pci_print_aer() case is via aer_recover_work_func(), which
searches for the Error Source device. If the device is not found, there's
no per-device ratelimit, so we use a system-wide ratelimit that covers all
error types (correctable, non-fatal, and fatal).
Sargun at Meta reported internally that a flood of AER errors causes RCU
CPU stall warnings and CSD-lock warnings.
Tested using aer-inject[1]. Sent 11 AER errors. Observed 10 errors logged
while AER stats (cat /sys/bus/pci/devices/<dev>/aer_dev_correctable) show
true count of 11.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/gong.chen/aer-inject.git
[bhelgaas: commit log, factor out trace_aer_event() and aer_print_rp_info()
changes to previous patches, enable Error Source logging if any downstream
detail will be printed, don't ratelimit fatal errors, "aer_report" ->
"aer_info", "cor_log_ratelimit" -> "correctable_ratelimit",
"uncor_log_ratelimit" -> "nonfatal_ratelimit"]
Reported-by: Sargun Dhillon <sargun@meta.com>
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-19-helgaas@kernel.org
Return -ENOSPC error early so the usual path through add_error_device() is
the straightline code.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-18-helgaas@kernel.org
Previously aer_get_device_error_info() and aer_print_error() took a pointer
to struct aer_err_info and a pointer to a pci_dev. Typically the pci_dev
was one of the elements of the aer_err_info.dev[] array (DPC was an
exception, where the dev[] array was unused).
Convert aer_get_device_error_info() and aer_print_error() to take an index
into the aer_err_info.dev[] array instead. A future patch will add
per-device ratelimit information, so the index makes it convenient to find
the ratelimit associated with the device.
To accommodate DPC, set info->dev[0] to the DPC port before using these
interfaces.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-17-helgaas@kernel.org
-Fix the comment describing the 'start' function, which was a cut/paste
mistake for a different function.
-The comment for DIRECT_REQ and DIRECT_RESP only mentioned AArch32
and listed 32-bit function IDs. Update to include 64-bit.
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Instead of pr_xxx() macro, use dev_xxx() to print log.
This patch changes some error log level to warn log level when
the tpm_crb_ffa secure partition doesn't support properly but
system can run without it.
(i.e) unsupport of direct message ABI or unsupported ABI version
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
For secure partition with multi service, tpm_ffa_crb can access tpm
service with direct message request v2 interface according to chapter 3.3,
TPM Service Command Response Buffer Interface Over FF-A specificationi v1.0 BET.
This patch reflects this spec to access tpm service over
FF-A direct message request v2 ABI.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The kmalloc failure message is just noise. Remove it and replace -EFAULT
with -ENOMEM as standard for out of memory allocation error returns.
Link: https://lore.kernel.org/linux-integrity/20250430083435.860146-1-colin.i.king@gmail.com/
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Update name to reflect the broader definition of structs/variables that are
stored (e.g. ratelimits). This is a preparatory patch for adding rate limit
support.
[bhelgaas: "aer_report" -> "aer_info"]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-16-helgaas@kernel.org
Some existing logs in pci_print_aer() log with error severity by default.
Convert them to use KERN_WARNING for correctable errors and KERN_ERR for
uncorrectable errors.
[bhelgaas: commit log]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-15-helgaas@kernel.org
aer_print_error() produces output at a printk level (KERN_ERR/KERN_WARNING/
etc) that depends on the kind of error, and it calls pcie_print_tlp_log(),
which previously always produced output at KERN_ERR.
Add a "level" parameter so aer_print_error() can control the level of the
pcie_print_tlp_log() output to match.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-14-helgaas@kernel.org
When reporting an AER error, we check its type multiple times to determine
the log level for each message. Do this check only in the top-level
functions (aer_isr_one_error(), pci_print_aer()) and save the level in
struct aer_err_info.
[bhelgaas: save log level in struct aer_err_info instead of passing it
as a parameter]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-13-helgaas@kernel.org
As with the AER statistics, we always want to emit trace events, even if
the actual dmesg logging is rate limited.
Call trace_aer_event() immediately after pci_dev_aer_stats_incr() so both
happen before ratelimiting.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-12-helgaas@kernel.org
There are two AER logging entry points:
- aer_print_error() is used by DPC (dpc_process_error()) and native AER
handling (aer_process_err_devices()).
- pci_print_aer() is used by GHES (aer_recover_work_func()) and CXL
(cxl_handle_rdport_errors())
Both use __aer_print_error() to print the AER error bits. Previously
__aer_print_error() also incremented the AER statistics via
pci_dev_aer_stats_incr().
Call pci_dev_aer_stats_incr() early in the entry points instead of in
__aer_print_error() so we update the statistics even if the actual printing
of error bits is rate limited by a future change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-11-helgaas@kernel.org
Simplify pci_print_aer() by initializing the struct aer_err_info "info"
with a designated initializer list (it was previously initialized with
memset()) and using pci_name().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-10-helgaas@kernel.org
Previously the struct aer_err_info "e_info" was allocated on the stack
without being initialized, so it contained junk except for the fields we
explicitly set later.
Initialize "e_info" at declaration with a designated initializer list,
which initializes the other members to zero.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-9-helgaas@kernel.org
Move aer_print_source() earlier in the file so a future change can use it
from aer_print_error(), where it's easier to rate limit it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-8-helgaas@kernel.org
Rename aer_print_port_info() to aer_print_source() to be more descriptive.
This logs the Error Source ID logged by a Root Port or Root Complex Event
Collector when it receives an ERR_COR, ERR_NONFATAL, or ERR_FATAL Message.
[bhelgaas: aer_print_rp_info() -> aer_print_source()]
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-7-helgaas@kernel.org
Use PCI_BUS_NUM(), PCI_SLOT(), PCI_FUNC() to extract the bus number,
device, and function number directly from the Error Source ID. There's no
need to shift and mask it explicitly.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-6-helgaas@kernel.org
Previously we decoded the AER Error Source ID in aer_isr_one_error_type(),
then again in find_source_device() if we didn't find any devices with
errors logged in their AER Capabilities.
Consolidate this so we only decode and log the Error Source ID once in
aer_isr_one_error_type(). Add a "found" parameter so we can add a note
when we didn't find any downstream devices with errors logged in their AER
Capability.
This changes the dmesg logging when we found no devices with errors logged:
- pci 0000:00:01.0: AER: Correctable error message received from 0000:02:00.0
- pci 0000:00:01.0: AER: found no error details for 0000:02:00.0
+ pci 0000:00:01.0: AER: Correctable error message received from 0000:02:00.0 (no details found)
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-5-helgaas@kernel.org
aer_isr_one_error() duplicates the Error Source ID logging and AER error
processing for Correctable Errors and Uncorrectable Errors. Factor out the
duplicated code to aer_isr_one_error_type().
aer_isr_one_error() doesn't need the struct aer_rpc pointer, so pass it the
Root Port or RCEC pci_dev pointer instead.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-4-helgaas@kernel.org
DPC Error Source ID is only valid when the DPC Trigger Reason indicates
that DPC was triggered due to reception of an ERR_NONFATAL or ERR_FATAL
Message (PCIe r6.0, sec 7.9.14.5).
When DPC was triggered by ERR_NONFATAL (PCI_EXP_DPC_STATUS_TRIGGER_RSN_NFE)
or ERR_FATAL (PCI_EXP_DPC_STATUS_TRIGGER_RSN_FE) from a downstream device,
log the Error Source ID (decoded into domain/bus/device/function). Don't
print the source otherwise, since it's not valid.
For DPC trigger due to reception of ERR_NONFATAL or ERR_FATAL, the dmesg
logging changes:
- pci 0000:00:01.0: DPC: containment event, status:0x000d source:0x0200
- pci 0000:00:01.0: DPC: ERR_FATAL detected
+ pci 0000:00:01.0: DPC: containment event, status:0x000d, ERR_FATAL received from 0000:02:00.0
and when DPC triggered for other reasons, where DPC Error Source ID is
undefined, e.g., unmasked uncorrectable error:
- pci 0000:00:01.0: DPC: containment event, status:0x0009 source:0x0200
- pci 0000:00:01.0: DPC: unmasked uncorrectable error detected
+ pci 0000:00:01.0: DPC: containment event, status:0x0009: unmasked uncorrectable error detected
Previously the "containment event" message was at KERN_INFO and the
"%s detected" message was at KERN_WARNING. Now the single message is at
KERN_WARNING.
Fixes: 26e5157133 ("PCI: Add Downstream Port Containment driver")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-3-helgaas@kernel.org
Previously the struct aer_err_info "info" was allocated on the stack
without being initialized, so it contained junk except for the fields we
explicitly set later.
Initialize "info" at declaration so it starts as all zeros.
Fixes: 8aefa9b0d9 ("PCI/DPC: Print AER status in DPC event handling")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-2-helgaas@kernel.org
Merge series from Gabor Juhos <j4g8y7@gmail.com>:
The two patches in the series are extending the usage of FIELD_PREP()
macro and predefined bitmasks usage in the driver.
When submitting of the descriptors fails, it is quite likely that
the register read buffer contains no valid data. Even if the data
is valid the function returns with an error code anyway.
Change the code to return early if qcom_submit_descs() fails to
avoid superfluously copying possibly invalid data.
Also change the return statement at the end of the function to use
zero value to indicate success obviusly.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250515-qpic-snand-early-error-v1-1-681c87611213@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vrEs
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc8-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix for rename regression due to the recent VFS lookup changes
- Fix write failure
- locking fix for oplock handling
* tag 'v6.15-rc8-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use list_first_entry_or_null for opinfo_get_list()
ksmbd: fix rename failure
ksmbd: fix stream write failure
Add feature UBLK_F_QUIESCE, which adds control command `UBLK_U_CMD_QUIESCE_DEV`
for quiescing device, then device state can become `UBLK_S_DEV_QUIESCED`
or `UBLK_S_DEV_FAIL_IO` finally from ublk_ch_release() with ublk server
cooperation.
This feature can help to support to upgrade ublk server application by
shutting down ublk server gracefully, meantime keep ublk block device
persistent during the upgrading period.
The feature is only available for UBLK_F_USER_RECOVERY.
Suggested-by: Yoav Cohen <yoav@nvidia.com>
Link: https://lore.kernel.org/linux-block/DM4PR12MB632807AB7CDCE77D1E5AB7D0A9B92@DM4PR12MB6328.namprd12.prod.outlook.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add test generic_10 for covering new control command of UBLK_U_CMD_UPDATE_SIZE.
Add 'update_size -s|--size size_in_bytes' sub-command on ublk utility for
supporting this feature, then verify the feature via generic_10.
Cc: Omri Mann <omri@nvidia.com>
Cc: Jared Holzman <jholzman@nvidia.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove hard-coded strings by using the str_read_write() helper.
Signed-off-by: Yumeng Fang <fang.yumeng@zte.com.cn>
Signed-off-by: Yunjian Long <long.yunjian@zte.com.cn>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Filesystems like XFS can implement atomic write I/O using either
REQ_ATOMIC flag set in the bio or via CoW operation. It will be useful
if we have a flag in trace events to distinguish between the two. This
patch adds char 'U' (Untorn writes) to rwbs field of the trace events
if REQ_ATOMIC flag is set in the bio.
<W/ REQ_ATOMIC>
=================
xfs_io-4238 [009] ..... 4148.126843: block_rq_issue: 259,0 WFSU 16384 () 768 + 32 none,0,0 [xfs_io]
<idle>-0 [009] d.h1. 4148.129864: block_rq_complete: 259,0 WFSU () 768 + 32 none,0,0 [0]
<W/O REQ_ATOMIC>
===============
xfs_io-4237 [010] ..... 4143.325616: block_rq_issue: 259,0 WS 16384 () 768 + 32 none,0,0 [xfs_io]
<idle>-0 [010] d.H1. 4143.329138: block_rq_complete: 259,0 WS () 768 + 32 none,0,0 [0]
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/44317cb2ec4588f6a2c1501a96684e6a1196e8ba.1747921498.git.ritesh.list@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A few last minute fixes:
- two driver fixes for samsung/google platforms, both addressing
mistakes in changes from the 6.15 merge window
- a revert for an allwinner devicetree change that caused problems
- a fix for an older regression with the LEDs on Marvell Armada 3720
- a defconfig change to enable chacha20 again after a crypto
subsystem change in 6.15 inadventently turned it off
-----BEGIN PGP SIGNATURE-----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=bZbJ
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes:
- two driver fixes for samsung/google platforms, both addressing
mistakes in changes from the 6.15 merge window
- a revert for an allwinner devicetree change that caused problems
- a fix for an older regression with the LEDs on Marvell Armada 3720
- a defconfig change to enable chacha20 again after a crypto
subsystem change in 6.15 inadventently turned it off"
* tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selected
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
soc: samsung: usi: prevent wrong bits inversion during unconfiguring
firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
