Currently we only build regdomain when channel list event is received.
That event is received when driver boots or when a new country code is
sent to firmware. At either time we may have no information about
interface mode or AP's power type, consequently WMI_REG_INDOOR_AP is
selected. In upcoming patches we will rebuild regdomain once those
information is available. For that purpose reg info has to be
stored/refreshed each time a new channel list event is received.
The stored reg info would be freed in ath12k_reg_free() when it is not
needed.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-6-c869c86cad60@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The reg info is allocated in ath12k_reg_chan_list_event() but validated
in ath12k_reg_handle_chan_list(). Currently this is good since reg info
would be freed regardless of validation results. However in an upcoming
patch the reg info might need to be stored for later use if the result
is good. Since we can not tell the result from return value of
ath12k_reg_handle_chan_list(), we need to move validation out of it.
Add a new helper ath12k_reg_validate_reg_info() and call it in
ath12k_reg_chan_list_event(), based on the result we can choose to store
or free it in the following patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-5-c869c86cad60@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
For 6 GHz band, firmware offers 3 types of regulatory rules for AP
mode and 6 for station mode in WMI_REG_CHAN_LIST_CC_EXT_EVENTID event.
In ath12k_reg_build_regd() current code by default chooses
WMI_REG_INDOOR_AP type rules from AP mode reg list to build regdomain,
regardless of the interface mode and power type, hence is not correct.
Pass interface mode (wmi_vdev_type) and AP power type
(ieee80211_ap_reg_power) as new arguments to ath12k_reg_build_regd()
such that we can choose correct rules based on them. Currently
ath12k_reg_build_regd() is called only by ath12k_reg_chan_list_event()
when driver boots, at that time these two arguments are not determined
yet, hence by default pass WMI_VDEV_TYPE_UNSPEC and
IEEE80211_REG_UNSET_AP, this results in WMI_REG_INDOOR_AP being chosen
at last. In upcoming patches the rules would be updated when these two
arguments could be determined.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-4-c869c86cad60@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently we pass intersect flag to tell ath12k_reg_build_regd() whether
regulatory rulse are intersected. This flag is determined in
ath12k_reg_handle_chan_list() and has no other users.
Move related logic into ath12k_reg_build_regd() to make code clear. Also
relocate ath12k_reg_is_world_alpha() to avoid forward declaration, and
refine it for code simplicity.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-3-c869c86cad60@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath12k_reg_chan_list_event() is doing quite some work: allocate/free
reg_info, parse chan list event and store required info in reg_info,
process reg_info, build regd and queue work item for later processing
etc, which makes it hard to read.
Refactor this function:
1. extract reg_info processing and regd building into a new helper
ath12k_reg_handle_chan_list().
2. extract reg_info free into a new helper ath12k_reg_reset_reg_info().
Note the refactor also benefit some upcoming patches where these helpers
are getting called.
Also relocate these two helpers and the existing
ath12k_reg_is_world_alpha() to reg.c to reflect what they are doing.
And update fw to firmware while relocating.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-2-c869c86cad60@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
spin_lock/spin_unlock are used in ath12k_reg_chan_list_event
to acquire/release ab->base_lock. For now this is safe because
that function is only called in soft IRQ context.
But ath12k_reg_chan_list_event() will be called from process
context in an upcoming patch, and this can result in a deadlock
if ab->base_lock is acquired in process context and then soft
IRQ occurs on the same CPU and tries to acquire that lock.
Fix it by using spin_lock_bh and spin_unlock_bh instead.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-1-c869c86cad60@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently mon reap timer is not used, and it is not needed anymore for
WCN7850.
So remove related code.
This change does not affect QCN9274, as the mon reap timer is not used
for QCN9274.
Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250416022011.1935-1-kang.yang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In an effort to move ARM64 away from the legacy MSI setup, convert the
Tegra PCIe driver to the MSI-parent infrastructure and let each device have
its own MSI domain.
[ tglx: Moved the struct out of the function call argument ]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-10-maz@kernel.org
In an effort to move ARM64 away from the legacy MSI setup, convert the
XGENE PCIe driver to the MSI-parent infrastructure and let each device have
its own MSI domain.
[ tglx: Moved the struct out of the function call argument ]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-9-maz@kernel.org
In an effort to move ARM64 away from the legacy MSI setup, convert the
Apple PCIe driver to the MSI-parent infrastructure and let each device have
its own MSI domain.
[ tglx: Moved the struct out of the function call argument ]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/all/20250513172819.2216709-8-maz@kernel.org
Bad MSI implementations multiplex MSIs onto a single downstream interrupt,
meaning they have no concept of individual affinity.
The old MSI code did a reasonable job at this by honouring the
MSI_FLAG_NO_AFFINITY, but the new shiny device MSI code doesn't.
Teach it about the sad reality of existing hardware.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-7-maz@kernel.org
Switch the MVEBU family of interrupt chip drivers over to the common helper
function to create the interrupt domains.
[ tglx: Moved the struct out of the function call argument and fix up
the of_node_to_fwnode() instances ]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-5-maz@kernel.org
Switch the GIC family of interrupt chip drivers over to the common helper
function to create the interrupt domains.
[ tglx: Moved the struct out of the function call argument ]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-4-maz@kernel.org
Creating an irq domain that serves as an MSI parent requires
a substantial amount of esoteric boiler-plate code, some of
which is often provided twice (such as the bus token).
To make things a bit simpler for the unsuspecting MSI tinkerer,
provide a helper that does it for them, and serves as documentation
of what needs to be provided.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-3-maz@kernel.org
Move irq-msi-lib.h into include/linux/irqchip, making it available
to compilation units outside of drivers/irqchip.
This requires some churn in drivers to fetch it from the new location,
generated using this script:
git grep -l -w \"irq-msi-lib.h\" | \
xargs sed -i -e 's:"irq-msi-lib.h":\<linux/irqchip/irq-msi-lib.h\>:'
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-2-maz@kernel.org
Now that the file has been thrown through the mincer, finish the job and
consolidate the coding style.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
irqdomain.c's kernel-doc exists, but is not plugged into Documentation/
yet.
Before plugging it in, fix it first: irq_domain_get_irq_data() and
irq_domain_set_info() were documented twice. Identically, by both
definitions for CONFIG_IRQ_DOMAIN_HIERARCHY and !CONFIG_IRQ_DOMAIN_HIERARCHY.
Therefore, switch the second kernel-doc into an ordinary comment -- change
"/**" to simple "/*". This avoids sphinx's: WARNING: Duplicate C
declaration
Next, in commit b7b377332b ("irqdomain: Fix the kernel-doc and plug it
into Documentation"), irqdomain.h's (header) kernel-doc was added into
core-api/genericirq.rst. But given the amount of irqdomain functions and
structures, move all these to core-api/irq/irq-domain.rst now.
Finally, add these newly fixed irqdomain.c's (source) docs there as
well.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-58-jirislaby@kernel.org
The irqdomain documentaion became obsolete over time. Update and extend
it a bit with respect to the current code and HW.
Most notably the doubled documentation of irq_domain (from .rst and .h)
was unified and let only in .rst. A reference link was added to .h.
Furthermore:
* Add some 'struct' keywords, so that the respective structs are
hyperlinked
* :c:member: use where appropriate to mark a member of a struct
* Rephrase some wording to improve readability/understanding
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-57-jirislaby@kernel.org
The improvements include:
* Capitals in headlines.
* Add commas: for easier reading, it is always desired to add commas
at some places in text. Like before adverbs or after fronted
sentences.
* 3rd person -> add 's' to verbs.
* End some sentences with period and start a new one. Avoid thus heavy
sentences.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-56-jirislaby@kernel.org
Just note in the docs:
1) A PCI device as an example for shared interrupts
2) A sparse tree can be used for interrupts too
3) i8259s which have 8 pins
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-55-jirislaby@kernel.org
For easier reading, it is always desired to add commas at some places in
text. Like before adverbs or after fronted sentences.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-54-jirislaby@kernel.org
Many of irqdomain.h's functions are referenced in Documentation/ but are
not properly documented. Therefore, document these.
And use "Returns:" tag consistently, so that it is properly generated in
the resulting docs.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-53-jirislaby@kernel.org
This is just expressing it explicitly as irq_domain_instantiate() takes
const already. No functional change.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-52-jirislaby@kernel.org
This makes the code more compact.
Note that irq_domain_create_hierarchy()'s handling of size is now part of
info's initializer (using the ternary operator). That makes more sense
while reading it.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-51-jirislaby@kernel.org
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/20250319092951.37667-48-jirislaby@kernel.org
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-47-jirislaby@kernel.org
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-45-jirislaby@kernel.org
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/20250319092951.37667-44-jirislaby@kernel.org
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-43-jirislaby@kernel.org
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> # for 8xx
Link: https://lore.kernel.org/all/20250319092951.37667-42-jirislaby@kernel.org
Most irq_domain_add_*() functions are unused now, so drop them. The
remaining ones are moved to the deprecated section and will be removed
during the merge window after the patches in various trees have been
merged.
Note: The Chinese docs are touched but unfinished. I cannot parse those.
[ tglx: Remove the leftover in irq-domain.rst and handle merge logistics ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-41-jirislaby@kernel.org
All irq_domain_add_*() functions are going away. PowerPC is the only
user of irq_domain_add_nomap() and there is no irq_domain_create_nomap()
complement.
Therefore, to align with the rest of the kernel, rename
irq_domain_add_nomap() to irq_domain_create_nomap() and accept a
fwnode_handle instead of a device_node.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-40-jirislaby@kernel.org
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fixed up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-39-jirislaby@kernel.org
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> # For soc/fsl
Link: https://lore.kernel.org/all/20250319092951.37667-35-jirislaby@kernel.org
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-34-jirislaby@kernel.org
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # For 8xx
Link: https://lore.kernel.org/all/20250319092951.37667-33-jirislaby@kernel.org
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/20250319092951.37667-31-jirislaby@kernel.org
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix and convert the new instance in
dwc/pcie-amd-mdb.c ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-30-jirislaby@kernel.org
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-29-jirislaby@kernel.org
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-28-jirislaby@kernel.org
irq_domain_add_simple() is going away as being obsolete now. Switch to
the preferred irq_domain_create_simple(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-27-jirislaby@kernel.org
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-26-jirislaby@kernel.org
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-25-jirislaby@kernel.org
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-24-jirislaby@kernel.org
irq_domain_add_tree() is going away as being obsolete now. Switch to
the preferred irq_domain_create_tree(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-23-jirislaby@kernel.org
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/all/20250319092951.37667-22-jirislaby@kernel.org
irq_domain_add_simple() is going away as being obsolete now. Switch to
the preferred irq_domain_create_simple(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-21-jirislaby@kernel.org
