There is a spelling mistake in a ath10k_warn message. Fix it and
remove space before colon to tidy up message.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250418115627.534833-1-colin.i.king@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
According to the code documentation in ath12k_mac_op_hw_scan(), "if no
links of an ML VIF are already active on the radio corresponding to the
given scan frequency, the scan link (link ID 15) should be used". This rule
should apply to non-ML interfaces as well to maintain uniformity across the
driver. However, currently, link 0 is selected as the scan link during
non-ML operations.
Update the code to use scan link ID 15 in all cases.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250417-fix_scan_vdev_handling-v3-2-9ec42513d26b@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
For scanning purposes, the driver can use link ID 15 (scan link). A future
change will make non-ML interfaces to select the scan link. In this
scenario, arvif->link_id will be used to retrieve the link configuration in
ath12k_mac_vdev_create(). However, link ID 15 is not recognized as a valid
link ID in the upper kernel, which will result in a failure to fetch
link_conf and subsequently cause the scan to fail.
To avoid this issue, ensure link_conf is fetched only when the link ID is
within the valid range. Since link_conf cannot be retrieved using the scan
link, use vif->addr as the Ethernet address for creating the scan vdev.
This address will serve as the source address (address 2) in the probe
request frames during scanning. Additionally, use the automatic Tx power
value for the vdev. As this is a scan vdev, these values do not affect the
scan functionality.
Note that vif->addr will only be taken when a valid link_conf can not be
fetched. Otherwise, link_conf's address will be taken as address 2.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250417-fix_scan_vdev_handling-v3-1-9ec42513d26b@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Read the country code from SMBIOS and send it to the firmware. The
firmware will then indicate the regulatory domain information for
the country code, which ath12k will use.
dmesg:
[ 1242.637253] ath12k_pci 0000:02:00.0: worldwide regdomain setting from SMBIOS
[ 1242.637259] ath12k_pci 0000:02:00.0: bdf variant name not found.
[ 1242.637261] ath12k_pci 0000:02:00.0: SMBIOS bdf variant name not set.
[ 1242.927543] ath12k_pci 0000:02:00.0: set current country pdev id 0 alpha2 00
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-02582-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250417024227.1712-1-kang.yang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fix to zone block devices to make the maximum segment count match what
the block layer is capable of.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCaCdNASYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdM9AQCAEmBq
jLr8DawbZikyyoesDwaUelT2NHZv0N2pf4ju0gEAraO3pYMYWaDnUQ73cIKhl8Bo
ZG3BCf6MZD1fRq8SxBU=
=C6ti
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Fix to zone block devices to make the maximum segment count match what
the block layer is capable of"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd_zbc: block: Respect bio vector limits for REPORT ZONES buffer
-----BEGIN PGP SIGNATURE-----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=s90l
-----END PGP SIGNATURE-----
Merge tag 'block-6.15-20250515' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fixes for atomic writes (Alan Adamson)
- fixes for polled CQs in nvmet-epf (Damien Le Moal)
- fix for polled CQs in nvme-pci (Keith Busch)
- fix compile on odd configs that need to be forced to inline
(Kees Cook)
- one more quirk (Ilya Guterman)
- Fix for missing allocation of an integrity buffer for some cases
- Fix for a regression with ublk command cancelation
* tag 'block-6.15-20250515' of git://git.kernel.dk/linux:
ublk: fix dead loop when canceling io command
nvme-pci: add NVME_QUIRK_NO_DEEPEST_PS quirk for SOLIDIGM P44 Pro
nvme: all namespaces in a subsystem must adhere to a common atomic write size
nvme: multipath: enable BLK_FEAT_ATOMIC_WRITES for multipathing
nvmet: pci-epf: remove NVMET_PCI_EPF_Q_IS_SQ
nvmet: pci-epf: improve debug message
nvmet: pci-epf: cleanup nvmet_pci_epf_raise_irq()
nvmet: pci-epf: do not fall back to using INTX if not supported
nvmet: pci-epf: clear completion queue IRQ flag on delete
nvme-pci: acquire cq_poll_lock in nvme_poll_irqdisable
nvme-pci: make nvme_pci_npages_prp() __always_inline
block: always allocate integrity buffer when required
Standalone "nologreplay" mount option has been marked deprecated since
commit 74ef00185e ("btrfs: introduce "rescue=" mount option"), which
dates back to v5.9 (2020).
Furthermore there is no other filesystem with the same named mount
option, so this one is btrfs specific and we will not hit the same
problem when removing "norecovery" mount option.
So let's remove the standalone "nologreplay" mount option.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=7NS8
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.15-20250515' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix a regression with highmem and mapping of regions, where
the coalescing code assumes any page is directly mapped
- Fix an issue with HYBRID_IOPOLL and passthrough commands,
where the timer wasn't always setup correctly
- Fix an issue with fdinfo not correctly locking around reading
the rings, which can be an issue if the ring is being resized
at the same time
* tag 'io_uring-6.15-20250515' of git://git.kernel.dk/linux:
io_uring/fdinfo: grab ctx->uring_lock around io_uring_show_fdinfo()
io_uring/memmap: don't use page_address() on a highmem page
io_uring/uring_cmd: fix hybrid polling initialization issue
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaCcCuwAKCRBcsMJ8RxYu
Y4y9AX0eXpTqbVMGs+D1KG6s1ryQz3vhinZxwxZJgkHysrpXQklVXQXeOgRWV9gi
pxM2EjoBgOr0qwMxleAvM4OqUI/2TFwBhl59CBcxnFFruU5H+snUzEWWsNw645/C
9ONJI05uXA==
=Wc8h
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.15-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"This includes a bug fix for a possible data corruption vector on the
zoned allocator garbage collector"
* tag 'xfs-fixes-6.15-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Fix comment on xfs_trans_ail_update_bulk()
xfs: Fix a comment on xfs_ail_delete
xfs: Fail remount with noattr2 on a v5 with v4 enabled
xfs: fix zoned GC data corruption due to wrong bv_offset
xfs: free up mp->m_free[0].count in error case
Virtual machines can exploit bus locks to degrade the performance of
the system. Bus locks can be caused by Non-WB(Write back) and
misaligned locked RMW (Read-modify-Write) instructions and require
systemwide synchronization among all processors which can result into
significant performance penalties.
To address this issue, the Bus Lock Threshold feature is introduced to
provide ability to hypervisor to restrict guests' capability of
initiating mulitple buslocks, thereby preventing system slowdowns.
Support for the buslock threshold is indicated via CPUID function
0x8000000A_EDX[29].
On the processors that support the Bus Lock Threshold feature, the
VMCB provides a Bus Lock Threshold enable bit and an unsigned 16-bit
Bus Lock threshold count.
VMCB intercept bit
VMCB Offset Bits Function
14h 5 Intercept bus lock operations
Bus lock threshold count
VMCB Offset Bits Function
120h 15:0 Bus lock counter
When a VMRUN instruction is executed, the bus lock threshold count is
loaded into an internal count register. Before the processor executes
a bus lock in the guest, it checks the value of this register:
- If the value is greater than '0', the processor successfully
executes the bus lock and decrements the count.
- If the value is '0', the bus lock is not executed, and a #VMEXIT to
the VMM is taken.
The bus lock threshold #VMEXIT is reported to the VMM with the VMEXIT
code A5h, SVM_EXIT_BUS_LOCK.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Co-developed-by: Manali Shukla <manali.shukla@amd.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-4-manali.shukla@amd.com
[sean: rewrite shortlog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Misbehaving guests can cause bus locks to degrade the performance of
the system. The Bus Lock Threshold feature can be used to address this
issue by providing capability to the hypervisor to limit guest's
ability to generate bus lock, thereby preventing system slowdown due
to performance penalities.
When the Bus Lock Threshold feature is enabled, the processor checks
the bus lock threshold count before executing the buslock and decides
whether to trigger bus lock exit or not.
The value of the bus lock threshold count '0' generates bus lock
exits, and if the value is greater than '0', the bus lock is executed
successfully and the bus lock threshold count is decremented.
Presence of the Bus Lock threshold feature is indicated via CPUID
function 0x8000000A_EDX[29].
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250502050346.14274-3-manali.shukla@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move and rename kvm_pio_request.linear_rip to
kvm_vcpu_arch.cui_linear_rip so that the field can be used by other
userspace exit completion flows that need to take action if and only
if userspace has not modified RIP.
No functional changes intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-2-manali.shukla@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix ACPI PPTT parsing code to address a regression introduced recently
and add more sanity checking of data supplied by the platform firmware
to avoid using invalid data (Jeremy Linton).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmgnY30SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1/SsH/2UT//SvEWzrUmkstQ3Z24T1HlqEPp7a
0uqamvkM505Bdeq3wgaDLH8LsMd/9MVpTdJ5gQ5gxLjTH8WnJUlzr8IN0K/ic13u
ARgju9tW0PBE7iMpeS0npADkEzgD6YqJl4/c/EPQI9iKLn7U39W9z1UAo7hroWye
zFfFTQx0kONYa8p6aoN/A3YhCQjsa1XyvMc4AwQHyNEtqbgLGrp3mGZ2M27vUPlr
jamwJSBo5X3Gelrx81KBPuF1f3M0CYuI2m03FoVH1YBFm2dSqzSh+UfMdRUpD6oe
d+EzygDHcxx+tyFHblaC3QOM+b7p8zoffxQqQtOXWfS/bIK9pAP7VgI=
=nBNl
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix ACPI PPTT parsing code to address a regression introduced recently
and add more sanity checking of data supplied by the platform firmware
to avoid using invalid data (Jeremy Linton)"
* tag 'acpi-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PPTT: Fix processor subtable walk
Fix an error caught with -Werror in amd-pstate-ut.
-----BEGIN PGP SIGNATURE-----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=IUvq
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.16-2025-05-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge an amd-pstate driver fix for 6.16 (5/15/25) from Mario
Liminciello:
"Fix an error caught with -Werror in amd-pstate-ut."
* tag 'amd-pstate-v6.16-2025-05-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
Extract the guts of thp_configured() and get_trans_hugepagesz() to
standalone helpers so that the core logic can be reused for other sysfs
files, e.g. to query numa_balancing.
Opportunistically assert that the initial fscanf() read at least one byte,
and add a comment explaining the second call to fscanf().
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-2-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
A few small driver specific fixes, the most substantial one being the
Tegra one which fixes spurious errors with default delays for chip
select hold times.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgnId8ACgkQJNaLcl1U
h9BDQQf+KKJtGgtd+XuNNP/B/SyUZeCFDlzSJXnGpMFbnlyjGZhmZeGO6Y/JGJ2I
/gNe7d34lhsyzBazxMEzYOs/cCbDoSjSgh0bbrzLZtVeslcels1AfSc1Xye/lkqL
gdGBukIthK9UkYhMGB0OhLHrptkAhixwiYBsQGb6BRN6MUcl25Gz2wceeg/IlU70
NVVk0NDqcUqKCPvathzAMP+3CEVfKIlaxMD4pY1L3Yp/qCczZaOsaXbyv447GYpU
h4JdqRQBSe9QZUGvIPhYTtMJZbn36uF6OXCbTDrLIe0SM6+ZdiqgbVaDvX2Nj8gk
TY0stSu8P1zB2wKbDR7AP9Zy2Ff3/w==
=MfcL
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes, the most substantial one being the
Tegra one which fixes spurious errors with default delays for chip
select hold times"
* tag 'spi-fix-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-sun4i: fix early activation
spi: tegra114: Use value to check for invalid delays
spi: loopback-test: Do not split 1024-byte hexdumps
They look rather messy right now.
Link: https://lore.kernel.org/20250516-work-coredump-socket-v8-3-664f3caf2516@kernel.org
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We're going to extend the coredump code in follow-up patches.
Clean it up so we can do this more easily.
Link: https://lore.kernel.org/20250516-work-coredump-socket-v8-2-664f3caf2516@kernel.org
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We're going to extend the coredump code in follow-up patches.
Clean it up so we can do this more easily.
Link: https://lore.kernel.org/20250516-work-coredump-socket-v8-1-664f3caf2516@kernel.org
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This fixes an invalid memory access in the MAX20086 driver which could
occur during error handling for failed probe due to a hidden use of
devres in the core DT parsing code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgnIV4ACgkQJNaLcl1U
h9BEwwf/RDoAZMoaoBQfk04TZuV+olMPacl+7YjQuGd8kCMbp2zpMdQW/eHyNxrP
1NzTrqaKDJoPlyrjTBiPr626SPzUF+C33dBDKlRV3Wd0zT/Domq6WJwbyyJxCff/
4X1xWlsP8VICQPSNteZkEa6pimac6k8M5eFkiHN9yH1lpKFhLHIJYT34CvlB9G65
q+y3O9XalYI2NjNuC4+70/IqqFN6xtKwydN79QQzH5SY9YKrS+ayBqS6OLVY350d
hQ+enuvPHLBWkwq371sV86w+MIpNwOHjyp8gfyqvFKcHwnBM9tGB0YZQGHO036tb
LxSnR5woHvTAL+SCJtrBK/Jm2NZD2Q==
=AkAm
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"This fixes an invalid memory access in the MAX20086 driver which could
occur during error handling for failed probe due to a hidden use of
devres in the core DT parsing code"
* tag 'regulator-fix-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max20086: fix invalid memory access
- fix an interrupt storm on system wake-up in gpio-pca953x
- fix an out-of-bounds write in gpio-virtuser
- update MAINTAINERS with an entry for the sloppy logic analyzer
-----BEGIN PGP SIGNATURE-----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=Qbvo
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an interrupt storm on system wake-up in gpio-pca953x
- fix an out-of-bounds write in gpio-virtuser
- update MAINTAINERS with an entry for the sloppy logic analyzer
* tag 'gpio-fixes-for-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtuser: fix potential out-of-bound write
gpio: pca953x: fix IRQ storm on system wake up
MAINTAINERS: add me as maintainer for the gpio sloppy logic analyzer
Add Rx timestamp function when the Rx timestamp value is read directly
from the Rx descriptor. In order to extend the Rx timestamp value to 64
bit in hot path, the PHC time is cached in the receive groups.
Add supported Rx timestamp modes.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: YiFei Zhu <zhuyifei@google.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add functions to request Tx timestamp for the PTP packets, read the Tx
timestamp when the completion tag for that packet is being received,
extend the Tx timestamp value and set the supported timestamping modes.
Tx timestamp is requested for the PTP packets by setting a TSYN bit and
index value in the Tx context descriptor. The driver assumption is that
the Tx timestamp value is ready to be read when the completion tag is
received. Then the driver schedules delayed work and the Tx timestamp
value read is requested through virtchnl message. At the end, the Tx
timestamp value is extended to 64-bit and provided back to the skb.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Co-developed-by: Josh Hay <joshua.a.hay@intel.com>
Signed-off-by: Josh Hay <joshua.a.hay@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tx timestamp capabilities are negotiated for the uplink Vport.
Driver receives information about the number of available Tx timestamp
latches, the size of Tx timestamp value and the set of indexes used
for Tx timestamping.
Add function to get the Tx timestamp capabilities and parse the uplink
vport flag.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Co-developed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
PTP clock configuration operations - set time, adjust time and adjust
frequency are required to control the clock and maintain synchronization
process.
Extend get PTP capabilities function to request for the clock adjustments
and add functions to enable these actions using dedicated virtchnl
messages.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the access to read PTP clock is specified as mailbox, the driver
needs to send virtchnl message to perform PTP actions. Message is sent
using idpf_mbq_opc_send_msg_to_peer_drv mailbox opcode, with the parameters
received during PTP capabilities negotiation.
Add functions to recognize PTP messages, move them to dedicated secondary
mailbox, read the PTP clock time and cross timestamp using mailbox
messages.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
PTP capabilities are negotiated using virtchnl command. Add get
capabilities function, direct access to read the PTP clock.
Set initial PTP capabilities exposed to the stack.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move virtchnl structures to the header file to expose them for the PTP
virtchnl file.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
PTP capabilities are negotiated using virtchnl commands. There are two
available modes of the PTP support: direct and mailbox. When the direct
access to PTP resources is negotiated, virtchnl messages returns a set
of registers that allow read/write directly. When the mailbox access to
PTP resources is negotiated, virtchnl messages are used to access
PTP clock and to read the timestamp values.
Virtchnl API covers both modes and exposes a set of PTP capabilities.
Using virtchnl API, the driver recognizes also HW abilities - maximum
adjustment of the clock and the basic increment value.
Additionally, API allows to configure the secondary mailbox, dedicated
exclusively for PTP purposes.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
PTP feature is supported if the VIRTCHNL2_CAP_PTP is negotiated during the
capabilities recognition. Initial PTP support includes PTP initialization
and registration of the clock.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Since workqueues are created per CPU, the works scheduled to this
workqueues are run on the CPU they were assigned. It may result in
overloaded CPU that is not able to handle virtchnl messages in
relatively short time. Allocating workqueue with WQ_UNBOUND and
WQ_HIGHPRI flags allows scheduler to queue virtchl messages on less loaded
CPUs, what eliminates delays.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
A handful small fixes. The only significant change is the fix for
MIDI 2.0 UMP handling in ALSA sequencer, but as MIDI 2.0 stuff is
still new and rarely used, the impact should be pretty limited.
Other than that, quirks for USB-audio and a few cosmetic fixes and
changes in drivers that should be safe to apply.
-----BEGIN PGP SIGNATURE-----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=kbgJ
-----END PGP SIGNATURE-----
Merge tag 'sound-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A handful small fixes. The only significant change is the fix for MIDI
2.0 UMP handling in ALSA sequencer, but as MIDI 2.0 stuff is still new
and rarely used, the impact should be pretty limited.
Other than that, quirks for USB-audio and a few cosmetic fixes and
changes in drivers that should be safe to apply"
* tag 'sound-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add sample rate quirk for Microdia JP001 USB Camera
ALSA: es1968: Add error handling for snd_pcm_hw_constraint_pow2()
ALSA: sh: SND_AICA should depend on SH_DMA_API
ALSA: usb-audio: Add sample rate quirk for Audioengine D1
ALSA: ump: Fix a typo of snd_ump_stream_msg_device_info
ALSA/hda: intel-sdw-acpi: Correct sdw_intel_acpi_scan() function parameter
ALSA: seq: Fix delivery of UMP events to group ports
The perf_sample_data_init() has already set the period of sample, so no
need to do it again.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250506094907.2724-1-changbin.du@huawei.com
On ARM64, when running with --configs '36*SRCU-P', I noticed that only 1 instance
instead of 36 for starting.
Fix it by checking for Image files, instead of bzImage which ARM does
not seem to have. With this I see all 36 instances running at the same
time in the batch.
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Back in the day, rcutorture was about the only thing that tested off-stack
CPU masks, but now any arm64 system with more than 256 CPUs tests it
full time. In fact, it is necessary to hack the kernel to prevent such
a system from testing off-stack CPU masks. This means that there is
no longer much point in rcutorture going out of its way to test this.
And given the differences in how CPUMASK_OFFSTACK is enabled in x86 and
arm64, rcutorture would need to go out of its way.
This commit therefore removes CONFIG_CPUMASK_OFFSTACK=y (and the
CONFIG_MAXSMP=y required to enable it on x86) from TREE01.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
The TREE01.boot nr_cpus kernel boot parameter has been set to 43 for
more than seven years, but it can cause RCU CPU stall warnings on arm64,
most of the time involving the stop-machine subsystem. This should
not be too surprising, given that this causes 43 vCPUs to spin with
interrupts disabled when there are only eight physical CPUs.
The point of this CPU overcommit is to test the ability of expedited RCU
grace period initialization to handle races with incoming CPUs that have
never previously been online. But limiting to 17 CPUs instead of 43
allows time for this code to be exercised, and eliminates (or at least
greatly reduces) the incidence of RCU CPU stall warnings on arm64.
So this commit therefore sets nr_cpus=17 in TREE01.boot.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Different architectures capitalize their splats differently. Who knew?
This commit therefore checks for both arm64 "Call trace:" and x86
"Call Trace:".
Reported-by: Joel Fernandes <joelagnelf@nvidia.com>
Closes: https://lore.kernel.org/all/553c33d8-2b51-4772-8aef-97b0163bc78e@nvidia.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Currently, the ->gpwrap is not tested (at all per my testing) due to the
requirement of a large delta between a CPU's rdp->gp_seq and its node's
rnp->gpseq.
This results in no testing of ->gpwrap being set. This patch by default
adds 5 minutes of testing with ->gpwrap forced by lowering the delta
between rdp->gp_seq and rnp->gp_seq to just 8 GPs. All of this is
configurable, including the active time for the setting and a full
testing cycle.
By default, the first 25 minutes of a test will have the _default_
behavior there is right now (ULONG_MAX / 4) delta. Then for 5 minutes,
we switch to a smaller delta causing 1-2 wraps in 5 minutes. I believe
this is reasonable since we at least add a little bit of testing for
usecases where ->gpwrap is set.
[ Apply fix for Dan Carpenter's bug report on init path cleanup. ]
[ Apply kernel doc warning fix from Akira Yokosawa. ]
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
This commit adds a --do-rcu-rust parameter to torture.sh, which invokes
a rust_doctests_kernel kunit run. Note that kunit wants a clean source
tree, so this runs "make mrproper", which might come as a surprise to
some users. Should there be a --mrproper parameter to torture.sh to make
the user explicitly ask for it?
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Right now, torture.sh runs normal runs unconditionally, which can be slow
and thus annoying when you only want to test --kcsan or --kasan runs.
This commit therefore adds a --do-normal argument so that "--kcsan
--do-no-kasan --do-no-normal" runs only KCSAN runs. Note that specifying
"--do-no-kasan --do-no-kcsan --do-no-normal" gets normal runs, so you
should not try to use this as a synonym for --do-none.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Uses of srcu_read_lock_lite() and srcu_read_unlock_lite() are better
served by the new srcu_read_lock_fast() and srcu_read_unlock_fast() APIs.
As in srcu_read_lock_lite() and srcu_read_unlock_lite() would never have
happened had I thought a bit harder a few months ago. Therefore, mark
them deprecated.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
The rcu_torture_reader() and rcu_torture_fwd_prog_cr() functions
run CPU-bound for extended periods of time (tens or even
hundreds of milliseconds), so they invoke tick_dep_set_task() and
tick_dep_clear_task() to ensure that the scheduling-clock tick helps
move grace periods forward.
So why doesn't rcu_torture_fwd_prog_nr() also invoke tick_dep_set_task()
and tick_dep_clear_task()? Because the point of this function is to test
RCU's ability to (eventually) force grace periods forward even when the
tick has been disabled during long CPU-bound kernel execution.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
BSS might be uninitialized when entering the startup code, so forbid the
use by the startup code of any variables that live after __bss_start in
the linker map.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-8-ardb+git@google.com
[will: Drop export of 'memstart_offset_seed', as this has been removed]
Signed-off-by: Will Deacon <will@kernel.org>
Accessing BSS will no longer be permitted from the startup code in
arch/arm64/kernel/pi, as some of it executes before BSS is cleared.
Clearing BSS earlier would involve managing cache coherency explicitly
in software, which is a hassle we prefer to avoid.
So move some variables that are assigned by the startup code out of BSS
and into .data.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-7-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
init_pgdir[] is only referenced from the startup code, but lives after
BSS in the linker map. Before tightening the rules about accessing BSS
from startup code, move init_pgdir[] into the __pi_ namespace, so it
does not need to be exported explicitly.
For symmetry, do the same with init_idmap_pgdir[], although it lives
before BSS.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-6-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
When an XDR counted array has a maximum element count, xdrgen adds
a bounds check to the encoder or decoder for that type. But in cases
where the .x provides no maximum element count, such as
struct notify4 {
/* composed from notify_type4 or notify_deviceid_type4 */
bitmap4 notify_mask;
notifylist4 notify_vals;
};
struct CB_NOTIFY4args {
stateid4 cna_stateid;
nfs_fh4 cna_fh;
notify4 cna_changes<>;
};
xdrgen is supposed to omit that bounds check. Some of the Jinja2
templates handle that correctly, but a few are incorrect and leave
the bounds check in place with a maximum of zero, which causes
encoding/decoding of that type to fail unconditionally.
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Upon detecting the ID for the ESMT F50D1G41LB chip, the fifth byte
returned is always 0x00 instead of the expected JEDEC continuation code
of 0x7f. This causes detection to fail:
[ 0.304399] spi-nand spi0.0: unknown raw ID c8117f7f00
[ 0.508943] spi-nand: probe of spi0.0 failed with error -524
So let's revert back to the 4 byte ID code for this chip
specifically.
Fixes: 4bd14b2fd8 ("mtd: spinand: esmt: Extend IDs to 5 bytes")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
last_cmd and last_byte are now unused brcmnand_host members.
last_addr is only written and never read so we can remove it too.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
blk-mq-dma.c was split from blk-merge.c which has no copyright notice,
but except for some boilerplate code and comments left from the old
version this is all my code, so add my copyright.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250513071433.836797-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
