We can safely reenable IRQs if coming from userspace. This allows to
access user memory that could potentially trigger a page fault.
Fixes: b686ecdeac ("riscv: misaligned: Restrict user access to kernel memory")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422162324.956065-3-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Since both load/store and user/kernel should use almost the same path and
that we are going to add some code around that, factorize it.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422162324.956065-2-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Merge the pmdomain fixes for v6.15-rc[n] into the next branch, to allow
them to get tested together with the new changes that are targeted for
v6.16.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The error checking for of_count_phandle_with_args() does not handle
negative error codes correctly. The problem is that "index" is a u32 so
in the condition "if (index >= num_domains)" negative error codes stored
in "num_domains" are type promoted to very high positive values and
"index" is always going to be valid.
Test for negative error codes first and then test if "index" is valid.
Fixes: 3ccf3f0cd1 ("PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBxPQ8AI8N5v-7rL@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
sync_file_debug_add() and sync_file_debug_remove() have been unused
since 2016's
commit d4cab38e15 ("staging/android: prepare sync_file for de-staging")
Remove them.
Since sync_file_debug_add was the only thing to add to
sync_file_list_head, the code that dumps it in part of
sync_info_debugfs_show can be removed, and the declaration of
the list and it's associated lock can be removed.
(The 'fences:\n...' marker in that debugfs file is left in
so as not to change the output)
That leaves the sync_print_sync_file() helper unused, and
is thus removed.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250505233838.105668-1-linux@treblig.org
Drop sort_memblock_regions() and avoid sorting the copied memory
regions to be ascending order on their base addresses, because the
source memory regions should have been sorted correctly when they
are added by memblock_add() or its variants.
This is generally reverting commit a14307f531 ("KVM: arm64: Sort
the hypervisor memblocks"). No functional changes intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250311043718.91004-1-gshan@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The lock guard conversion converted raw_spin_lock_irq() to
scoped_guard(raw_spinlock), which is obviously bogus and makes lockdep
mightily unhappy.
Note to self: Copy and pasta without using brain is a patently bad idea.
Fixes: 88a4df117a ("genirq/cpuhotplug: Convert to lock guards")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Jakub Kicinski says:
====================
virtio-net: fix total qstat values
Another small fix discovered after we enabled virtio multi-queue
in netdev CI. The queue stat test fails:
# Exception| Exception: Qstats are lower, fetched later
not ok 3 stats.pkt_byte_sum
The queue stats from disabled queues are supposed to be reported
in the "base" stats.
====================
Link: https://patch.msgid.link/20250507003221.823267-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NIPA tests report that the interface statistics reported
via qstat are lower than those reported via ip link.
Looks like this is because some tests flip the queue
count up and down, and we end up with some of the traffic
accounted on disabled queues.
Add up counters from disabled queues.
Fixes: d888f04c09 ("virtio-net: support queue stat")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250507003221.823267-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Older drivers and drivers with lower queue counts often have a static
array of queues, rather than allocating structs for each queue on demand.
Add a helper for adding up qstats from a queue range. Expectation is
that driver will pass a queue range [netdev->real_num_*x_queues, MAX).
It was tempting to always use num_*x_queues as the end, but virtio
seems to clamp its queue count after allocating the netdev. And this
way we can trivaly reuse the helper for [0, real_..).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250507003221.823267-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
snd_gus_use_dec(), snd_gus_use_inc() and snd_gf1_print_voice_registers()
last uses were removed in 2007 by
commit e5723b41ab ("[ALSA] Remove sequencer instrument layer")
Remove them.
While there, remove big #if 0 blocks next to the code being deleted.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250508000225.195766-1-linux@treblig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some common parts, such as struct tas2781_hda{...} and some audio
kcontrols are moved into an independent lib for code cleanup.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250507045813.151-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_stream_get_spbmaxfifo() was originally added in 2015
in commit ee8bc4df1b ("ALSA: hdac: Add support to enable SPIB for hdac
ext stream")
when it was originally called snd_hdac_ext_stream_set_spbmaxfifo,
it was renamed snd_hdac_ext_stream_get_spbmaxfifo shortly after
and was finally renamed to snd_hdac_stream_get_spbmaxfifo in 2022.
But it was never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250505011037.340592-1-linux@treblig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hda_add_nid() last use was removed in 2014 by
commit db8e8a9dc9 ("ALSA: hda - Remove the obsoleted static quirk codes
from patch_cmedia.c")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250505010922.340534-1-linux@treblig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alexander Duyck says:
====================
fbnic: FW IPC Mailbox fixes
This series is meant to address a number of issues that have been found in
the FW IPC mailbox over the past several months.
The main issues addressed are:
1. Resolve a potential race between host and FW during initialization that
can cause the FW to only have the lower 32b of an address.
2. Block the FW from issuing DMA requests after we have closed the mailbox
and before we have started issuing requests on it.
3. Fix races in the IRQ handlers that can cause the IRQ to unmask itself if
it is being processed while we are trying to disable it.
4. Cleanup the Tx flush logic so that we actually lock down the Tx path
before we start flushing it instead of letting it free run while we are
shutting it down.
5. Fix several memory leaks that could occur if we failed initialization.
6. Cleanup the mailbox completion if we are flushing Tx since we are no
longer processing Rx.
7. Move several allocations out of a potential IRQ/atomic context.
There have been a few optimizations we also picked up since then. Rather
than split them out I just folded them into these diffs. They mostly
address minor issues such as how long it takes to initialize and/or fail so
I thought they could probably go in with the rest of the patches. They
consist of:
1. Do not sleep more than 20ms waiting on FW to respond as the 200ms value
likely originated from simulation/emulation testing.
2. Use jiffies to determine timeout instead of sleep * attempts for better
accuracy.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://patch.msgid.link/174654659243.499179.11194817277075480209.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We had originally thought to have the mailbox go to ready in the background
while we were doing other things. One issue with this though is that we
can't disable it by clearing the ready state without also blocking
interrupts or calls to mbx_poll as it will just pop back to life during an
interrupt.
In order to prevent that from happening we can pull the code for toggling
to ready out of the interrupt path and instead place it in the
fbnic_mbx_poll_tx_ready path so that it becomes the only spot where the
Rx/Tx can toggle to the ready state. By doing this we can prevent races
where we disable the DMA and/or free buffers only to have an interrupt fire
and undo what we have done.
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654722518.499179.11612865740376848478.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change pulls the call to fbnic_fw_xmit_cap_msg out of
fbnic_mbx_init_desc_ring and instead places it in the polling function for
getting the Tx ready. Doing that we can avoid the potential issue with an
interrupt coming in later from the firmware that causes it to get fired in
interrupt context.
Fixes: 20d2e88cc7 ("eth: fbnic: Add initial messaging to notify FW of our presence")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654721876.499179.9839651602256668493.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There were a couple different issues found in fbnic_mbx_poll_tx_ready.
Among them were the fact that we were sleeping much longer than we actually
needed to as the actual FW could respond in under 20ms. The other issue was
that we would just keep polling the mailbox even if the device itself had
gone away.
To address the responsiveness issues we can decrease the sleeps to 20ms and
use a jiffies based timeout value rather than just counting the number of
times we slept and then polled.
To address the hardware going away we can move the check for the firmware
BAR being present from where it was and place it inside the loop after the
mailbox descriptor ring is initialized and before we sleep so that we just
abort and return an error if the device went away during initialization.
With these two changes we see a significant improvement in boot times for
the driver.
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654721224.499179.2698616208976624755.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There was an issue in that if we were to shutdown we could be left with
a completion in flight as the mailbox went away. To address that I have
added an fbnic_mbx_evict_all_cmpl function that is meant to essentially
create a "broken pipe" type response so that all callers will receive an
error indicating that the connection has been broken as a result of us
shutting down the mailbox.
Fixes: 378e5cc1c6 ("eth: fbnic: hwmon: Add completion infrastructure for firmware requests")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654720578.499179.380252598204530873.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The fbnic_mbx_flush_tx function had a number of issues.
First, we were waiting 200ms for the firmware to process the packets. We
can drop this to 20ms and in almost all cases this should be more than
enough time. So by changing this we can significantly reduce shutdown time.
Second, we were not making sure that the Tx path was actually shut off. As
such we could still have packets added while we were flushing the mailbox.
To prevent that we can now clear the ready flag for the Tx side and it
should stay down since the interrupt is disabled.
Third, we kept re-reading the tail due to the second issue. The tail should
not move after we have started the flush so we can just read it once while
we are holding the mailbox Tx lock. By doing that we are guaranteed that
the value should be consistent.
Fourth, we were keeping a count of descriptors cleaned due to the second
and third issues called out. That count is not a valid reason to be exiting
the cleanup, and with the tail only being read once we shouldn't see any
cases where the tail moves after the disable so the tracking of count can
be dropped.
Fifth, we were using attempts * sleep time to determine how long we would
wait in our polling loop to flush out the Tx. This can be very imprecise.
In order to tighten up the timing we are shifting over to using a jiffies
value of jiffies + 10 * HZ + 1 to determine the jiffies value we should
stop polling at as this should be accurate within once sleep cycle for the
total amount of time spent polling.
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654719929.499179.16406653096197423749.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We have two issues that need to be addressed in our IRQ handling.
One is the fact that we can end up double-freeing IRQs in the event of an
exception handling error such as a PCIe reset/recovery that fails. To
prevent that from becoming an issue we can use the msix_vector values to
indicate that we have successfully requested/freed the IRQ by only setting
or clearing them when we have completed the given action.
The other issue is that we have several potential races in our IRQ path due
to us manipulating the mask before the vector has been truly disabled. In
order to handle that in the case of the FW mailbox we need to not
auto-enable the IRQ and instead will be enabling/disabling it separately.
In the case of the PCS vector we can mitigate this by unmapping it and
synchronizing the IRQ before we clear the mask.
The general order of operations after this change is now to request the
interrupt, poll the FW mailbox to ready, and then enable the interrupt. For
the shutdown we do the reverse where we disable the interrupt, flush any
pending Tx, and then free the IRQ. I am renaming the enable/disable to
request/free to be equivilent with the IRQ calls being used. We may see
additions in the future to enable/disable the IRQs versus request/free them
for certain use cases.
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Fixes: 69684376ee ("eth: fbnic: Add link detection")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654719271.499179.3634535105127848325.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to prevent the device from throwing spurious writes and/or reads
at us we need to gate the AXI fabric interface to the PCIe until such time
as we know the FW is in a known good state.
To accomplish this we use the mailbox as a mechanism for us to recognize
that the FW has acknowledged our presence and is no longer sending any
stale message data to us.
We start in fbnic_mbx_init by calling fbnic_mbx_reset_desc_ring function,
disabling the DMA in both directions, and then invalidating all the
descriptors in each ring.
We then poll the mailbox in fbnic_mbx_poll_tx_ready and when the interrupt
is set by the FW we pick it up and mark the mailboxes as ready, while also
enabling the DMA.
Once we have completed all the transactions and need to shut down we call
into fbnic_mbx_clean which will in turn call fbnic_mbx_reset_desc_ring for
each ring and shut down the DMA and once again invalidate the descriptors.
Fixes: 3646153161 ("eth: fbnic: Add register init to set PCIe/Ethernet device config")
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654718623.499179.7445197308109347982.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Address to issues with the FW mailbox descriptor initialization.
We need to reverse the order of accesses when we invalidate an entry versus
writing an entry. When writing an entry we write upper and then lower as
the lower 32b contain the valid bit that makes the entire address valid.
However for invalidation we should write it in the reverse order so that
the upper is marked invalid before we update it.
Without this change we may see FW attempt to access pages with the upper
32b of the address set to 0 which will likely result in DMAR faults due to
write access failures on mailbox shutdown.
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654717972.499179.8083789731819297034.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The following commit:
288a4ff0ad ("x86/msr: Move rdtsc{,_ordered}() to <asm/tsc.h>")
removed the <asm/msr.h> include from the accel/habanalabs driver, which broke
the build on UML:
drivers/accel/habanalabs/common/habanalabs_ioctl.c:326:23: error: call to undeclared function 'rdtsc'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
Make the driver depend on 'X86 && X86_64', instead of just 'X86_64',
thus it won't be built on UML.
Suggested-by: Johannes Berg <johannes.berg@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Oded Gabbay <ogabbay@kernel.org>
Link: https://lore.kernel.org/r/202505080003.0t7ewxGp-lkp@intel.com
On XEN PV, folio_pte_batch() can incorrectly batch beyond the end of a
folio due to a corner case in pte_advance_pfn(). Specifically, when the
PFN following the folio maps to an invalidated MFN,
expected_pte = pte_advance_pfn(expected_pte, nr);
produces a pte_none(). If the actual next PTE in memory is also
pte_none(), the pte_same() succeeds,
if (!pte_same(pte, expected_pte))
break;
the loop is not broken, and batching continues into unrelated memory.
For example, with a 4-page folio, the PTE layout might look like this:
[ 53.465673] [ T2552] folio_pte_batch: printing PTE values at addr=0x7f1ac9dc5000
[ 53.465674] [ T2552] PTE[453] = 000000010085c125
[ 53.465679] [ T2552] PTE[454] = 000000010085d125
[ 53.465682] [ T2552] PTE[455] = 000000010085e125
[ 53.465684] [ T2552] PTE[456] = 000000010085f125
[ 53.465686] [ T2552] PTE[457] = 0000000000000000 <-- not present
[ 53.465689] [ T2552] PTE[458] = 0000000101da7125
pte_advance_pfn(PTE[456]) returns a pte_none() due to invalid PFN->MFN
mapping. The next actual PTE (PTE[457]) is also pte_none(), so the loop
continues and includes PTE[457] in the batch, resulting in 5 batched
entries for a 4-page folio. This triggers the following warning:
[ 53.465751] [ T2552] page: refcount:85 mapcount:20 mapping:ffff88813ff4f6a8 index:0x110 pfn:0x10085c
[ 53.465754] [ T2552] head: order:2 mapcount:80 entire_mapcount:0 nr_pages_mapped:4 pincount:0
[ 53.465756] [ T2552] memcg:ffff888003573000
[ 53.465758] [ T2552] aops:0xffffffff8226fd20 ino:82467c dentry name(?):"libc.so.6"
[ 53.465761] [ T2552] flags: 0x2000000000416c(referenced|uptodate|lru|active|private|head|node=0|zone=2)
[ 53.465764] [ T2552] raw: 002000000000416c ffffea0004021f08 ffffea0004021908 ffff88813ff4f6a8
[ 53.465767] [ T2552] raw: 0000000000000110 ffff888133d8bd40 0000005500000013 ffff888003573000
[ 53.465768] [ T2552] head: 002000000000416c ffffea0004021f08 ffffea0004021908 ffff88813ff4f6a8
[ 53.465770] [ T2552] head: 0000000000000110 ffff888133d8bd40 0000005500000013 ffff888003573000
[ 53.465772] [ T2552] head: 0020000000000202 ffffea0004021701 000000040000004f 00000000ffffffff
[ 53.465774] [ T2552] head: 0000000300000003 8000000300000002 0000000000000013 0000000000000004
[ 53.465775] [ T2552] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1), const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *: (struct folio *)_compound_head(page + nr_pages - 1))) != folio)
Original code works as expected everywhere, except on XEN PV, where
pte_advance_pfn() can yield a pte_none() after balloon inflation due to
MFNs invalidation. In XEN, pte_advance_pfn() ends up calling
__pte()->xen_make_pte()->pte_pfn_to_mfn(), which returns pte_none() when
mfn == INVALID_P2M_ENTRY.
The pte_pfn_to_mfn() documents that nastiness:
If there's no mfn for the pfn, then just create an
empty non-present pte. Unfortunately this loses
information about the original pfn, so
pte_mfn_to_pfn is asymmetric.
While such hacks should certainly be removed, we can do better in
folio_pte_batch() and simply check ahead of time how many PTEs we can
possibly batch in our folio.
This way, we can not only fix the issue but cleanup the code: removing the
pte_pfn() check inside the loop body and avoiding end_ptr comparison +
arithmetic.
Link: https://lkml.kernel.org/r/20250502215019.822-2-arkamar@atlas.cz
Fixes: f8d937761d ("mm/memory: optimize fork() with PTE-mapped THP")
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit c0e473a0d2 ("block: fix race between set_blocksize and read
paths") was merged, set_blocksize() called by sb_set_blocksize() now locks
the inode of the backing device file. As a result of this change, syzbot
started reporting deadlock warnings due to a circular dependency involving
the semaphore "ns_sem" of the nilfs object, the inode lock of the backing
device file, and the locks that this inode lock is transitively dependent
on.
This is caused by a new lock dependency added by the above change, since
init_nilfs() calls sb_set_blocksize() in the lock section of "ns_sem".
However, these warnings are false positives because init_nilfs() is called
in the early stage of the mount operation and the filesystem has not yet
started.
The reason why "ns_sem" is locked in init_nilfs() was to avoid a race
condition in nilfs_fill_super() caused by sharing a nilfs object among
multiple filesystem instances (super block structures) in the early
implementation. However, nilfs objects and super block structures have
long ago become one-to-one, and there is no longer any need to use the
semaphore there.
So, fix this issue by removing the use of the semaphore "ns_sem" in
init_nilfs().
Link: https://lkml.kernel.org/r/20250503053327.12294-1-konishi.ryusuke@gmail.com
Fixes: c0e473a0d2 ("block: fix race between set_blocksize and read paths")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+00f7f5b884b117ee6773@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=00f7f5b884b117ee6773
Tested-by: syzbot+00f7f5b884b117ee6773@syzkaller.appspotmail.com
Reported-by: syzbot+f30591e72bfc24d4715b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f30591e72bfc24d4715b
Tested-by: syzbot+f30591e72bfc24d4715b@syzkaller.appspotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit d2d7867140 ("mm/hugetlb: enable bootmem allocation from CMA
areas"), a flag is used to mark hugetlb folios as allocated from CMA.
This flag is also used to decide if it should be freed to CMA.
However, the flag isn't copied to the smaller folios when a hugetlb folio
is broken up for demotion, which would cause it to be freed incorrectly.
Fix this by copying the flag to the smaller order hugetlb pages created
from the original one.
Link: https://lkml.kernel.org/r/20250501044325.20365-1-fvdl@google.com
Fixes: d2d7867140 ("mm/hugetlb: enable bootmem allocation from CMA areas")
Signed-off-by: Frank van der Linden <fvdl@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Jane Chu <Jane.Chu@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The !CONFIG_THP_SWAP check existed before just fine because slot cache
would reject high order allocation and let the caller split all folios and
try again.
But slot cache is gone, so large allocation will directly go to the
allocator, and the allocator should just fail silently to inform caller to
do the folio split, this is totally fine and expected.
Remove this meaningless warning.
Link: https://lkml.kernel.org/r/20250429094803.85518-1-ryncsn@gmail.com
Fixes: 0ff67f990b ("mm, swap: remove swap slot cache")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Closes: https://lore.kernel.org/linux-mm/20250428135252.25453B17-hca@linux.ibm.com/
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The compiler is unaware of the size of code generated by the ".rept"
assembler directive. This results in the compiler emitting branch
instructions where the offset to branch to exceeds the maximum allowed
value, resulting in build failures like the following:
CC protection_keys
/tmp/ccypKWAE.s: Assembler messages:
/tmp/ccypKWAE.s:2073: Error: operand out of range (0x0000000000020158
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
/tmp/ccypKWAE.s:2509: Error: operand out of range (0x0000000000020130
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
Fix the issue by manually adding nop instructions using the preprocessor.
Link: https://lkml.kernel.org/r/20250428131937.641989-2-nysal@linux.ibm.com
Fixes: 46036188ea ("selftests/mm: build with -O2")
Reported-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 50910acd6f ("selftests/mm: use sys_pkey helpers consistently")
added a pkey_util.c to refactor some of the protection_keys functions
accessible by other tests. But this broken the build in powerpc in two
ways,
pkey-powerpc.h: In function `arch_is_powervm':
pkey-powerpc.h:73:21: error: storage size of `buf' isn't known
73 | struct stat buf;
| ^~~
pkey-powerpc.h:75:14: error: implicit declaration of function `stat'; did you mean `strcat'? [-Wimplicit-function-declaration]
75 | if ((stat("/sys/firmware/devicetree/base/ibm,partition-name", &buf) == 0) &&
| ^~~~
| strcat
Since pkey_util.c includes pkeys-helper.h, which in turn includes pkeys-powerpc.h,
stat.h including is missing for "struct stat". This is fixed by adding "sys/stat.h"
in pkeys-powerpc.h
Secondly,
pkey-powerpc.h:55:18: warning: format `%llx' expects argument of type `long long unsigned int', but argument 3 has type `u64' {aka `long unsigned int'} [-Wformat=]
55 | dprintf4("%s() changing %016llx to %016llx\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
56 | __func__, __read_pkey_reg(), pkey_reg);
| ~~~~~~~~~~~~~~~~~
| |
| u64 {aka long unsigned int}
pkey-helpers.h:63:32: note: in definition of macro `dprintf_level'
63 | sigsafe_printf(args); \
| ^~~~
These format specifier related warning are removed by adding
"__SANE_USERSPACE_TYPES__" to pkeys_utils.c.
Link: https://lkml.kernel.org/r/20250428131937.641989-1-nysal@linux.ibm.com
Fixes: 50910acd6f ("selftests/mm: use sys_pkey helpers consistently")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce struct vm_struct::requested_size so that the requested
(re)allocation size is retained separately from the allocated area size.
This means that KASAN will correctly poison the correct spans of requested
bytes. This also means we can support growing the usable portion of an
allocation that can already be supported by the existing area's existing
allocation.
Link: https://lkml.kernel.org/r/20250426001105.it.679-kees@kernel.org
Fixes: 3ddc2fefe6 ("mm: vmalloc: implement vrealloc()")
Signed-off-by: Kees Cook <kees@kernel.org>
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/20250408192503.6149a816@outsider.home/
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current implementation of the guard region tests assume that /tmp is
mounted as tmpfs, that is shmem.
This isn't always the case, and at least one instance of a spurious test
failure has been reported as a result.
This assumption is unsafe, rushed and silly - and easily remedied by
simply using memfd, so do so.
We also have to fixup the readonly_file test to explicitly only be
applicable to file-backed cases.
Link: https://lkml.kernel.org/r/20250425162436.564002-1-lorenzo.stoakes@oracle.com
Fixes: 272f37d3e9 ("tools/selftests: expand all guard region tests to file-backed")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/linux-mm/a2d2766b-0ab4-437b-951a-8595a7506fe9@arm.com/
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently quota recovery is synchronized with unmount using sb->s_umount
semaphore. That is however prone to deadlocks because
flush_workqueue(osb->ocfs2_wq) called from umount code can wait for quota
recovery to complete while ocfs2_finish_quota_recovery() waits for
sb->s_umount semaphore.
Grabbing of sb->s_umount semaphore in ocfs2_finish_quota_recovery() is
only needed to protect that function from disabling of quotas from
ocfs2_dismount_volume(). Handle this problem by disabling quota recovery
early during unmount in ocfs2_dismount_volume() instead so that we can
drop acquisition of sb->s_umount from ocfs2_finish_quota_recovery().
Link: https://lkml.kernel.org/r/20250424134515.18933-6-jack@suse.cz
Fixes: 5f530de63c ("ocfs2: Use s_umount for quota recovery protection")
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Shichangkuo <shi.changkuo@h3c.com>
Reported-by: Murad Masimov <m.masimov@mt-integration.ru>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Tested-by: Heming Zhao <heming.zhao@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We will need ocfs2 recovery thread to acknowledge transitions of
recovery_state when disabling particular types of recovery. This is
similar to what currently happens when disabling recovery completely, just
more general. Implement the handshake and use it for exit from recovery.
Link: https://lkml.kernel.org/r/20250424134515.18933-5-jack@suse.cz
Fixes: 5f530de63c ("ocfs2: Use s_umount for quota recovery protection")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Tested-by: Heming Zhao <heming.zhao@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Murad Masimov <m.masimov@mt-integration.ru>
Cc: Shichangkuo <shi.changkuo@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "ocfs2: Fix deadlocks in quota recovery", v3.
This implements another approach to fixing quota recovery deadlocks. We
avoid grabbing sb->s_umount semaphore from ocfs2_finish_quota_recovery()
and instead stop quota recovery early in ocfs2_dismount_volume().
This patch (of 3):
We will need more recovery states than just pure enable / disable to fix
deadlocks with quota recovery. Switch osb->disable_recovery to enum.
Link: https://lkml.kernel.org/r/20250424134301.1392-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20250424134515.18933-4-jack@suse.cz
Fixes: 5f530de63c ("ocfs2: Use s_umount for quota recovery protection")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Tested-by: Heming Zhao <heming.zhao@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Murad Masimov <m.masimov@mt-integration.ru>
Cc: Shichangkuo <shi.changkuo@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
