When I started working for BayLibre I wasn't aware that the mailserver
rewrote the sender address and so a few commits entered kernel history
with a working but unexpected address. Map the unexpected to the intended
one. This also makes the author of those commits (e.g. 32b4f1a4f0
("pwm: jz4740: Another few conversions to regmap_{set,clear}_bits()"))
match the address used in the sign-off line.
Link: https://lkml.kernel.org/r/20250424060250.3085683-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As part of the ongoing efforts to sub-divide memory management
maintainership and reviewership, establish a section for Transparent Huge
Page support and add appropriate maintainers and reviewers.
[lorenzo.stoakes@oracle.com: add Dev Jain as THP reviewer]
Link: https://lkml.kernel.org/r/327e6f2f-0f0f-48af-9ca2-3f8cadf0d8bf@lucifer.local
Link: https://lkml.kernel.org/r/20250424111632.103637-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While discussing some userfaultfd relevant issues recently, Andrea noticed
a potential ABI breakage with -EAGAIN on almost all userfaultfd ioctl()s.
Quote from Andrea, explaining how -EAGAIN was processed, and how this
should fix it (taking example of UFFDIO_COPY ioctl):
The "mmap_changing" and "stale pmd" conditions are already reported as
-EAGAIN written in the copy field, this does not change it. This change
removes the subnormal case that left copy.copy uninitialized and required
apps to explicitly set the copy field to get deterministic
behavior (which is a requirement contrary to the documentation in both
the manpage and source code). In turn there's no alteration to backwards
compatibility as result of this change because userland will find the
copy field consistently set to -EAGAIN, and not anymore sometime -EAGAIN
and sometime uninitialized.
Even then the change only can make a difference to non cooperative users
of userfaultfd, so when UFFD_FEATURE_EVENT_* is enabled, which is not
true for the vast majority of apps using userfaultfd or this unintended
uninitialized field may have been noticed sooner.
Meanwhile, since this bug existed for years, it also almost affects all
ioctl()s that was introduced later. Besides UFFDIO_ZEROPAGE, these also
get affected in the same way:
- UFFDIO_CONTINUE
- UFFDIO_POISON
- UFFDIO_MOVE
This patch should have fixed all of them.
Link: https://lkml.kernel.org/r/20250424215729.194656-2-peterx@redhat.com
Fixes: df2cc96e77 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races")
Fixes: f619147104 ("userfaultfd: add UFFDIO_CONTINUE ioctl")
Fixes: fc71884a5f ("mm: userfaultfd: add new UFFDIO_POISON ioctl")
Fixes: adef440691 ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com
Fixes: bd67d5c15c ("Test compaction of mlocked memory")
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Acked-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@inux.alibaba.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In furtherance of ongoing efforts to ensure people are aware of who
de-facto maintains/has an interest in specific parts of mm, as well trying
to avoid get_maintainers.pl listing only Andrew and the mailing list for
mm files - establish a 'core' memory management section establishing David
as co-maintainer alongside Andrew (thanks David for volunteering!) along
with a number of relevant reviewers.
We try to keep things as fine-grained as possible, so we place only
obviously 'general' mm things here. For files which are specific to a
particular part of mm, we prefer new entries.
Link: https://lkml.kernel.org/r/20250423123042.59082-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 7e119cff9d ("ocfs2: convert w_pages to w_folios") and commit
9a5e08652d ("ocfs2: use an array of folios instead of an array of
pages") save -ENOMEM in the folio array upon allocation failure and call
the folio array free code.
The folio array free code expects either valid folio pointers or NULL.
Finding the -ENOMEM will result in a panic. Fix by NULLing the error
folio entry.
Link: https://lkml.kernel.org/r/c879a52b-835c-4fa0-902b-8b2e9196dcbd@oracle.com
Fixes: 7e119cff9d ("ocfs2: convert w_pages to w_folios")
Fixes: 9a5e08652d ("ocfs2: use an array of folios instead of an array of pages")
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When migrating a THP, concurrent access to the PMD migration entry during
a deferred split scan can lead to an invalid address access, as
illustrated below. To prevent this invalid access, it is necessary to
check the PMD migration entry and return early. In this context, there is
no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the
equality of the target folio. Since the PMD migration entry is locked, it
cannot be served as the target.
Mailing list discussion and explanation from Hugh Dickins: "An anon_vma
lookup points to a location which may contain the folio of interest, but
might instead contain another folio: and weeding out those other folios is
precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of
replacing the wrong folio" comment a few lines above it) is for."
BUG: unable to handle page fault for address: ffffea60001db008
CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60
Call Trace:
<TASK>
try_to_migrate_one+0x28c/0x3730
rmap_walk_anon+0x4f6/0x770
unmap_folio+0x196/0x1f0
split_huge_page_to_list_to_order+0x9f6/0x1560
deferred_split_scan+0xac5/0x12a0
shrinker_debugfs_scan_write+0x376/0x470
full_proxy_write+0x15c/0x220
vfs_write+0x2fc/0xcb0
ksys_write+0x146/0x250
do_syscall_64+0x6a/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The bug is found by syzkaller on an internal kernel, then confirmed on
upstream.
Link: https://lkml.kernel.org/r/20250421113536.3682201-1-gavinguo@igalia.com
Link: https://lore.kernel.org/all/20250414072737.1698513-1-gavinguo@igalia.com/
Link: https://lore.kernel.org/all/20250418085802.2973519-1-gavinguo@igalia.com/
Fixes: 84c3fc4e9c ("mm: thp: check pmd migration entry in common path")
Signed-off-by: Gavin Guo <gavinguo@igalia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Florent Revest <revest@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Separate out the reverse mapping part of memory management and assign
appropriate maintainers and reviewers.
David has long been invovled in work with the reverse mapping and
continues to do so, so is well suited to maintain this area of the kernel.
I have a lot of experience working with the anonymous reverse mapping and
continue to work in this area, and also have good knowledge of the walking
code and code related to VMAs.
This helps people identify who to ask for help, and also additionally makes
life easier in review.
Link: https://lkml.kernel.org/r/20250418150052.299220-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 4eb7b93e03 ("ocfs2: improve write IO performance when
fragmentation is high") introduced another regression.
The following ocfs2-test case can trigger this issue:
> discontig_runner.sh => activate_discontig_bg.sh => resv_unwritten:
> ${RESV_UNWRITTEN_BIN} -f ${WORK_PLACE}/large_testfile -s 0 -l \
> $((${FILE_MAJOR_SIZE_M}*1024*1024))
In my env, test disk size (by "fdisk -l <dev>"):
> 53687091200 bytes, 104857600 sectors.
Above command is:
> /usr/local/ocfs2-test/bin/resv_unwritten -f \
> /mnt/ocfs2/ocfs2-activate-discontig-bg-dir/large_testfile -s 0 -l \
> 53187969024
Error log:
> [*] Reserve 50724M space for a LARGE file, reserve 200M space for future test.
> ioctl error 28: "No space left on device"
> resv allocation failed Unknown error -1
> reserve unwritten region from 0 to 53187969024.
Call flow:
__ocfs2_change_file_space //by ioctl OCFS2_IOC_RESVSP64
ocfs2_allocate_unwritten_extents //start:0 len:53187969024
while()
+ ocfs2_get_clusters //cpos:0, alloc_size:1623168 (cluster number)
+ ocfs2_extend_allocation
+ ocfs2_lock_allocators
| + choose OCFS2_AC_USE_MAIN & ocfs2_cluster_group_search
|
+ ocfs2_add_inode_data
ocfs2_add_clusters_in_btree
__ocfs2_claim_clusters
ocfs2_claim_suballoc_bits
+ During the allocation of the final part of the large file
(after ~47GB), no chain had the required contiguous
bits_wanted. Consequently, the allocation failed.
How to fix:
When OCFS2 is encountering fragmented allocation, the file system should
stop attempting bits_wanted contiguous allocation and instead provide the
largest available contiguous free bits from the cluster groups.
Link: https://lkml.kernel.org/r/20250414060125.19938-2-heming.zhao@suse.com
Fixes: 4eb7b93e03 ("ocfs2: improve write IO performance when fragmentation is high")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reported-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
VO clocks reside in a different address space from the AP clocks on the
T-HEAD SoC. Add the device tree node of a clock-controller to handle
VO address space as well.
Reviewed-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
Jonas Gorski says:
====================
net: dsa: b53: accumulated fixes
This patchset aims at fixing most issues observed while running the
vlan_unaware_bridge, vlan_aware_bridge and local_termination selftests.
Most tests succeed with these patches on BCM53115, connected to a
BCM6368.
It took me a while to figure out that a lot of tests will fail if all
ports have the same MAC address, as the switches drop any frames with
DA == SA. Luckily BCM63XX boards often have enough MACs allocated for
all ports, so I just needed to assign them.
The still failing tests are:
FDB learning, both vlan aware aware and unaware:
This is expected, as b53 currently does not implement changing the
ageing time, and both the bridge code and DSA ignore that, so the
learned entries don't age out as expected.
ping and ping6 in vlan unaware:
These fail because of the now fixed learning, the switch trying to
forward packet ingressing on one of the standalone ports to the learned
port of the mac address when the packets ingressed on the bridged port.
The port VLAN masks only prevent forwarding to other ports, but the ARL
lookup will still happen, and the packet gets dropped because the port
isn't allowed to forward there.
I have a fix/workaround for that, but as it is a bit more controversial
and makes use of an unrelated feature, I decided to hold off from that
and post it later.
This wasn't noticed so far, because learning was never working in VLAN
unaware mode, so the traffic was always broadcast (which sidesteps the
issue).
Finally some of the multicast tests from local_termination fail, where
the reception worked except it shouldn't. This doesn't seem to me as a
super serious issue, so I didn't attempt to debug/fix these yet.
I'm not super confident I didn't break sf2 along the way, but I did
compile test and tried to find ways it cause issues (I failed to find
any). I hope Florian will tell me.
====================
Link: https://patch.msgid.link/20250429201710.330937-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a port gets set up, b53 disables learning and enables the port for
flooding. This can undo any bridge configuration on the port.
E.g. the following flow would disable learning on a port:
$ ip link add br0 type bridge
$ ip link set sw1p1 master br0 <- enables learning for sw1p1
$ ip link set br0 up
$ ip link set sw1p1 up <- disables learning again
Fix this by populating dsa_switch_ops::port_setup(), and set up initial
config there.
Fixes: f9b3827ee6 ("net: dsa: b53: Support setting learning on port")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-12-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When VLAN filtering is off, we configure the switch to forward, but not
learn on VLAN table misses. This effectively disables learning while not
filtering.
Fix this by switching to forward and learn. Setting the learning disable
register will still control whether learning actually happens.
Fixes: dad8d7c645 ("net: dsa: b53: Properly account for VLAN filtering")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-11-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To allow runtime switching between vlan aware and vlan non-aware mode,
we need to properly keep track of any bridge VLAN configuration.
Likewise, we need to know when we actually switch between both modes, to
not have to rewrite the full VLAN table every time we update the VLANs.
So keep track of the current vlan_filtering mode, and on changes, apply
the appropriate VLAN configuration.
Fixes: 0ee2af4ebb ("net: dsa: set configure_vlan_while_not_filtering to true by default")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-10-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Documentation/networking/switchdev.rst says:
- with VLAN filtering turned off: the bridge is strictly VLAN unaware and its
data path will process all Ethernet frames as if they are VLAN-untagged.
The bridge VLAN database can still be modified, but the modifications should
have no effect while VLAN filtering is turned off.
This breaks if we immediately apply the VLAN configuration, so skip
writing it when vlan_filtering is off.
Fixes: 0ee2af4ebb ("net: dsa: set configure_vlan_while_not_filtering to true by default")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-9-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since we cannot set forwarding destinations per VLAN, we should not have
a VLAN 0 configured, as it would allow untagged traffic to work across
ports on VLAN aware bridges regardless if a PVID untagged VLAN exists.
So remove the VLAN 0 on join, an re-add it on leave. But only do so if
we have a VLAN aware bridge, as without it, untagged traffic would
become tagged with VID 0 on a VLAN unaware bridge.
Fixes: a2482d2ce3 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-8-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While JOIN_ALL_VLAN allows to join all VLANs, we still need to keep the
default VLAN enabled so that untagged traffic stays untagged.
So rejoin the default VLAN even for switches with JOIN_ALL_VLAN support.
Fixes: 48aea33a77 ("net: dsa: b53: Add JOIN_ALL_VLAN support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-7-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The untagged default VLAN is added to the default vlan, which may be
one, but we modify the VLAN 0 entry on bridge leave.
Fix this to use the correct VLAN entry for the default pvid.
Fixes: fea8335317 ("net: dsa: b53: Fix default VLAN ID")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-6-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Presumably the intention here was to flush the VLAN of the old pvid, not
the added VLAN again, which we already flushed before.
Fixes: a2482d2ce3 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-5-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the PVID of ports are only set when adding/updating VLANs with
PVID set or removing VLANs, but not when clearing the PVID flag of a
VLAN.
E.g. the following flow
$ ip link add br0 type bridge vlan_filtering 1
$ ip link set sw1p1 master bridge
$ bridge vlan add dev sw1p1 vid 10 pvid untagged
$ bridge vlan add dev sw1p1 vid 10 untagged
Would keep the PVID set as 10, despite the flag being cleared. Fix this
by checking if we need to unset the PVID on vlan updates.
Fixes: a2482d2ce3 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-4-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Broadcom management header does not carry the original VLAN tag
state information, just the ingress port, so for untagged frames we do
not know from which VLAN they originated.
Therefore keep the CPU port always tagged except for VLAN 0.
Fixes the following setup:
$ ip link add br0 type bridge vlan_filtering 1
$ ip link set sw1p1 master br0
$ bridge vlan add dev br0 pvid untagged self
$ ip link add sw1p2.10 link sw1p2 type vlan id 10
Where VID 10 would stay untagged on the CPU port.
Fixes: 2c32a3d3c2 ("net: dsa: b53: Do not force CPU to be always tagged")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow reserved multicast to ignore VLAN membership so STP and other
management protocols work without a PVID VLAN configured when using a
vlan aware bridge.
Fixes: 967dd82ffc ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make veth_pool_store detect requested pool changes, close device if
necessary, update pool, and reopen device.
Signed-off-by: Dave Marquardt <davemarq@linux.ibm.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506160004.328347-1-davemarq@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the build of sha256-ce.S when CONFIG_PREEMPT_VOLUNTARY=y by passing
the correct label to the cond_yield macro. Also adjust the code to
execute only one branch instruction when CONFIG_PREEMPT_VOLUNTARY=n.
Fixes: 6e36be511d ("crypto: arm64/sha256 - implement library instead of shash")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505071811.yYpLUbav-lkp@intel.com/
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rename poly1305_emit_64 to poly1305_emit_arch to conform with
the expectation of the poly1305 library.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Fixes: 14d3197914 ("crypto: powerpc/poly1305 - Add block-only interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is an if/else check where the else part is executed if
adc_vol_flag is true, this else path checks if adc_vol_flag
is true (which is a redundant second check) and the if path is
always taken. Remove the redundant check and remove the else
path since that can never occur.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250507140907.255562-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the rt712_vb multi-function codec and
rt1320 amplifier. Both devices are connected via a single Soundwire link 3,
sharing the sdw3-clock, sdw3-data[0] and sdw3-data[1] data lanes
respectively.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250507122649.153579-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable name contains duplications;thus, remove the redundant strings.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250507122649.153579-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A delay unit of 0 is a valid entry, thus it is not valid to check for
unused delays. Instead, check the value field; if that is zero, the
given delay is unset.
Fixes: 4426e6b4ec ("spi: tegra114: Don't fail set_cs_timing when delays are zero")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20250506-spi-tegra114-fixup-v1-1-136dc2f732f3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jakub Kicinski says:
====================
netlink: specs: remove phantom structs
rt-netlink and nl80211 have a few structs which may be helpful for Python
decoding of binary attrs, but which don't actually exist in the C uAPI.
This prevents us from using struct pointers for binary types in C.
We could support this situation better in the codegen, or add these
structs to uAPI. That said Johannes suggested we remove the WiFi
structs for now, and the rt-link ones are semi-broken.
Drop the struct definitions, for now, if someone has a need to use
such structs in Python (as opposed to them being defined for completeness)
we can revist.
v1: https://lore.kernel.org/20250505170215.253672-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250506194101.696272-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devconf is even odder than SNMP. On input it reports an array of u32s
which seem to be indexed by the enum values - 1. On output kernel
expects a nest where each attr has the enum type as the nla type.
sub-type: u32 is probably best we can do right now.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250506194101.696272-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
uAPI doesn't define structs for the SNMP counters, just enums to index
them as arrays. Switch to the same representation in the spec. C codegen
will soon need all the struct types to actually exist.
Note that the existing definition was broken, anyway, as the first
member should be the number of counters reported.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250506194101.696272-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
C codegen will soon support using struct types for binary attrs.
Correct the struct names in OvS specs.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250506194101.696272-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
C codegen will soon use structs for binary types. A handful of structs
in WiFi carry information elements from the wire, defined by the standard.
The structs are not part of uAPI, so we can't use them in C directly.
We could add them to the uAPI or add some annotation to tell the codegen
to output a local version to the user header. The former seems arbitrary
since we don't expose structs for most of the standard. The latter seems
like a lot of work for a rare occurrence. Drop the struct info for now.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/004030652d592b379e730be2f0344bebc4a03475.camel@sipsolutions.net
Link: https://patch.msgid.link/20250506194101.696272-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl-gen: split presence metadata
The presence metadata indicates whether given attribute was/should be
added to the Netlink message. We have 3 types of such metadata:
- bit presence for simple values like integers,
- len presence for variable size attrs, like binary and strings,
- count for arrays.
Previously this information was spread around with first two types
living in a dedicated sub-struct called _present. The counts resided
directly in the main struct with an n_ prefix.
Reshuffle these an uniformly store them in dedicated sub-structs.
The immediate motivation is that current scheme causes name collisions
for TC.
====================
Link: https://patch.msgid.link/20250505165208.248049-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While we reshuffle the presence members, move the counts as well.
Previously array count members would have been place directly in
the struct, so:
struct family_op_req {
struct {
u32 a:1;
u32 b:1;
} _present;
struct {
u32 bin;
} _len;
u32 a;
u64 b;
const unsigned char *bin;
u32 n_multi; << count
u32 *multi; << objects
};
Since len has been moved to its own presence struct move the count
as well:
struct family_op_req {
struct {
u32 a:1;
u32 b:1;
} _present;
struct {
u32 bin;
} _len;
struct {
u32 multi; << count
} _count;
u32 a;
u64 b;
const unsigned char *bin;
u32 *multi; << objects
};
This improves the consistency and allows us to remove some hacks
in the codegen. Unlike for len there is no known name collision
with the existing scheme.
Link: https://patch.msgid.link/20250505165208.248049-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each YNL struct contains the data and a sub-struct indicating which
fields are valid. Something like:
struct family_op_req {
struct {
u32 a:1;
u32 b:1;
u32 bin_len;
} _present;
u32 a;
u64 b;
const unsigned char *bin;
};
Note that the bin object 'bin' has a length stored, and that length
has a _len suffix added to the field name. This breaks if there
is a explicit field called bin_len, which is the case for some
TC actions. Move the length fields out of the _present struct,
create a new struct called _len:
struct family_op_req {
struct {
u32 a:1;
u32 b:1;
} _present;
struct {
u32 bin;
} _len;
u32 a;
u64 b;
const unsigned char *bin;
};
This should prevent name collisions and help with the packing
of the struct.
Unfortunately this is a breaking change, but hopefully the migration
isn't too painful.
Link: https://patch.msgid.link/20250505165208.248049-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Internal change to the code gen. Rename how we indicate a type
has a single bit presence from using a 'bit' string to 'present'.
This is a noop in terms of generated code but will make next
breaking change easier.
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250505165208.248049-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When sending out any kind of traffic, it is essential that the driver
keeps reporting BQL of the number of bytes that have been sent so that
BQL can track the amount of data in the queue and prevents it from
overflowing. If BQL is not reported, the driver may continue sending
packets even when the queue is full, leading to packet loss, congestion
and decreased network performance. Currently this is missing in
emac_xmit_xdp_frame() and this patch fixes it.
Fixes: 62aa3246f4 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506110546.4065715-4-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add __netif_tx_lock() to ensure that only one packet is being
transmitted at a time to avoid race conditions in the netif_txq
struct and prevent packet data corruption. Failing to do so causes
kernel panic with the following error:
[ 2184.746764] ------------[ cut here ]------------
[ 2184.751412] kernel BUG at lib/dynamic_queue_limits.c:99!
[ 2184.756728] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
logs: https://gist.github.com/MeghanaMalladiTI/9c7aa5fc3b7fb03f87c74aad487956e9
The lock is acquired before calling emac_xmit_xdp_frame() and released after the
call returns. This ensures that the TX queue is protected from concurrent access
during the transmission of XDP frames.
Fixes: 62aa3246f4 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506110546.4065715-3-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xdp_features demonstrates what all XDP capabilities are supported
on a given network device. The driver needs to set these xdp_features
flag to let the network stack know what XDP features a given driver
is supporting. These flags need to be set for a given ndev irrespective
of any XDP program being loaded or not.
Fixes: 62aa3246f4 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506110546.4065715-2-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When switching network namespaces with the bpf_redirect_peer helper, the
skb->mark and skb->tstamp fields are not zeroed out like they can be on
a typical netns switch. This patch clarifies that in the helper
description.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/ccc86af26d43c5c0b776bcba2601b7479c0d46d0.1746460653.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When bpf_redirect_peer is used to redirect packets to a device in
another network namespace, the skb isn't scrubbed. That can lead skb
information from one namespace to be "misused" in another namespace.
As one example, this is causing Cilium to drop traffic when using
bpf_redirect_peer to redirect packets that just went through IPsec
decryption to a container namespace. The following pwru trace shows (1)
the packet path from the host's XFRM layer to the container's XFRM
layer where it's dropped and (2) the number of active skb extensions at
each function.
NETNS MARK IFACE TUPLE FUNC
4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 xfrm_rcv_cb
.active_extensions = (__u8)2,
4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 xfrm4_rcv_cb
.active_extensions = (__u8)2,
4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 gro_cells_receive
.active_extensions = (__u8)2,
[...]
4026533547 0 eth0 10.244.3.124:35473->10.244.2.158:53 skb_do_redirect
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 ip_rcv
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 ip_rcv_core
.active_extensions = (__u8)2,
[...]
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 udp_queue_rcv_one_skb
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 __xfrm_policy_check
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 __xfrm_decode_session
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 security_xfrm_decode_session
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 kfree_skb_reason(SKB_DROP_REASON_XFRM_POLICY)
.active_extensions = (__u8)2,
In this case, there are no XFRM policies in the container's network
namespace so the drop is unexpected. When we decrypt the IPsec packet,
the XFRM state used for decryption is set in the skb extensions. This
information is preserved across the netns switch. When we reach the
XFRM policy check in the container's netns, __xfrm_policy_check drops
the packet with LINUX_MIB_XFRMINNOPOLS because a (container-side) XFRM
policy can't be found that matches the (host-side) XFRM state used for
decryption.
This patch fixes this by scrubbing the packet when using
bpf_redirect_peer, as is done on typical netns switches via veth
devices except skb->mark and skb->tstamp are not zeroed.
Fixes: 9aa1206e8f ("bpf: Add redirect_peer helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/1728ead5e0fe45e7a6542c36bd4e3ca07a73b7d6.1746460653.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The official Airoha EN7581 firmware requires adding max_packet field in
ppe_mbox_data struct while the unofficial one used to develop the Airoha
EN7581 flowtable support does not require this field.
This patch does not introduce any real backwards compatible issue since
EN7581 fw is not publicly available in linux-firmware or other
repositories (e.g. OpenWrt) yet and the official fw version will use this
new layout. For this reason this change needs to be backported.
Moreover, make explicit the padding added by the compiler introducing
the rsv array in init_info struct.
At the same time use u32 instead of int for init_info and set_info
struct definitions in ppe_mbox_data struct.
Fixes: 23290c7bc1 ("net: airoha: Introduce Airoha NPU support")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250506-airoha-en7581-fix-ppe_mbox_data-v5-1-29cabed6864d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Jwld
-----END PGP SIGNATURE-----
Merge tag 'nf-25-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contain Netfilter/IPVS fixes for net:
1) Fix KMSAN uninit-value in do_output_route4, reported by syzbot.
Patch from Julian Anastasov.
2) ipset hashtable set type breaks up the hashtable into regions of
2^10 buckets. Fix the macro that determines the hashtable lock
region to protect concurrent updates. From Jozsef Kadlecsik.
* tag 'nf-25-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: fix region locking in hash types
ipvs: fix uninit-value for saddr in do_output_route4
====================
Link: https://patch.msgid.link/20250507221952.86505-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch replaces the manual Netlink attribute iteration in
output_userspace() with nla_for_each_nested(), which ensures that only
well-formed attributes are processed.
Fixes: ccb1352e76 ("net: Add Open vSwitch kernel components.")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/0bd65949df61591d9171c0dc13e42cea8941da10.1746541734.git.echaudro@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unlike sysfs, the lifetime of configfs objects is controlled by
userspace. There is no mechanism for the kernel to find and delete all
created config-items. Instead, the configfs-tsm-report mechanism has an
expectation that tsm_unregister() can happen at any time and cause
established config-item access to start failing.
That expectation is not fully satisfied. While tsm_report_read(),
tsm_report_{is,is_bin}_visible(), and tsm_report_make_item() safely fail
if tsm_ops have been unregistered, tsm_report_privlevel_store()
tsm_report_provider_show() fail to check for ops registration. Add the
missing checks for tsm_ops having been removed.
Now, in supporting the ability for tsm_unregister() to always succeed,
it leaves the problem of what to do with lingering config-items. The
expectation is that the admin that arranges for the ->remove() (unbind)
of the ${tsm_arch}-guest driver is also responsible for deletion of all
open config-items. Until that deletion happens, ->probe() (reload /
bind) of the ${tsm_arch}-guest driver fails.
This allows for emergency shutdown / revocation of attestation
interfaces, and requires coordinated restart.
Fixes: 70e6f7e2b9 ("configfs-tsm: Introduce a shared ABI for attestation reports")
Cc: stable@vger.kernel.org
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reported-by: Cedric Xing <cedric.xing@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20250430203331.1177062-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
