smu_v13_0_display_clock_voltage_request() and
smu_v13_0_set_min_deep_sleep_dcefclk() were added in 2020 by
commit c05d1c4015 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
but have remained unused.
Remove them.
smu_v13_0_display_clock_voltage_request() was the only user
of smu_v13_0_set_hard_freq_limited_range(). Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The last use of smu_v11_0_get_dpm_level_range() was removed in 2020 by
commit 46a301e14e ("drm/amd/powerplay: drop unnecessary Navi1x specific
APIs")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu7_copy_bytes_from_smc() was added in 2016 by
commit 1ff55f4651 ("drm/amd/powerplay: implement smu7_smumgr for asics
with smu ip version 7.")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since secure firmware is more stable than bring up phase, I believe we
don't need such mdelays any more before wait PSP response on PSP v12.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Trigger Huang <Trigger.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If applications unmap the memory before destroying the userptr, it needs
trigger a segfault to notify user space to correct the free sequence in
VM debug mode.
v2: Send gpu access fault to user space
v3: Report gpu address to user space, remove unnecessary params
v4: update pr_err into one line, remove userptr log info
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In VM debug mode, it is desirable to notify the application
to correct the freeing sequence by unmapping the memory before
destroying the userptr in the old userptr path. Add a bitmask
to decide whether to send gpu vm fault to the applition.
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It requires unlocking the reserved gem BO before returning from
attaching the eviction fence error.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver doesn't want to implicitly sync on the DMA_RESV_USAGE_BOOKKEEP
usage fences, and the BOOKEEP fences should be synced explicitly. So, as
the VM implicit syncing only need to return and sync the dependent read
fences.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is an optional TA which is only available on
certain embedded systems. Mark it as optional to avoid
user confusion. This mirrors what we already do for
other optional TAs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4181
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355d ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This notification may arrive in VF mailbox while polling for response from
another event.
This patches covers the following scenarios:
- If VF is already in RMA state, then do not attempt to contact the host.
Host will ignore the VF after sending the notification.
- If the notification is detected during polling, then set the RMA status,
and return error to caller.
- If the notification arrives by interrupt, then set the RMA status and
queue a reset. This reset will fail and VF will stop runtime services.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host may stop runtime services after reaching a bad page threshold.
This notification will indicate to the VF that it no longer has
access to the GPU.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3a9626c816.
This breaks S4 because we end up setting the s3/s0ix flags
even when we are entering s4 since prepare is used by both
flows. The causes both the S3/s0ix and s4 flags to be set
which breaks several checks in the driver which assume they
are mutually exclusive.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3634
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN1_AON_SOC_ADDRESS_3_0 offset varies on different
VCN generations, the issue in vcn4.0.5 is caused by
a different VCN1_AON_SOC_ADDRESS_3_0 offset.
This patch does the following:
1. use the same offset for other VCN generations.
2. use the vcn4.0.5 special offset
3. update vcn_4_0 and vcn_5_0
Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dma_resv_add_fence() already refers to the added fence.
So when attaching the evciton fence to the gem bo, it needn't
refer to it anymore.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host will send a notification when new bad pages are available.
Uopn guest request, the first 256 bad page addresses
will be placed into the PF2VF region.
Guest should pause the PF2VF worker thread while
the copy is in progress.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently VFs rely on poison consumption interrupt from HW
to kick off the bad page retirement process. Part of this process
includes a VF reset.
This patch adds the following:
1) Host Bad Pages notification message.
2) Guest request bad pages message.
When combined, VFs are able to reserve the pages early, and potentially
avoid future poison consumption that will disrupt user services
from consequent FLR.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some random documentation associated with the ring buffer
manipulations and writeback.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA doesn't support oversubsciption, it is the user matter to create
queues over HW limit, but not supposed to be a KFD error.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We check for a NULL divisor but don't act on it.
This check does nothing other than throw a warning.
It does confuse static checkers though:
See https://lkml.org/lkml/2025/4/26/371
[How]
Drop the ASSERTs in both DC and SPL variants.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Fixes: 6efc0ab3b0 ("drm/amd/display: add back quality EASF and ISHARP and dc dependency changes")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace 0 and 1 with false and true for boolean variables in
dml2_core_dcn4_calcs.c and dml2_core_utils.c to align with the Linux
kernel coding style guidelines, which recommend using C99 bool type
with true/false values.
Signed-off-by: Ivan Shamliev <ivan.shamliev.dev@abv.bg>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds kernel-doc for externally linked dc_stream_remove_writeback function.
Signed-off-by: James Flowers <bold.zone2373@fastmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer versions of glibc include a definition of struct sched_attr in
bits/sched.h (included through sched.h which is included by rtla).
Commit 0eecee3406 ("tools/rtla: fix collision with glibc
sched_attr/sched_set_attr") has modified the definition of struct
sched_attr in utils.h, so that it is only applied with older versions of
glibc that do not define it, in order to prevent build failure.
The definition in bits/sched.h depends on _GNU_SOURCE.
timerlat_bpf.c does not define _GNU_SOURCE, making it fall back to the
definition in utils.h. The latter has two fields less, leading to
shifted offsets of struct timerlat_params in timerlat_bpf_init.
Because of the shift, timerlat_bpf_init incorrectly reads
params->entries as 0 for timerlat-hist and disables the creation of
histogram maps, causing breakage in BPF sample collection mode:
$ rtla timerlat hist -d 1s
Error pulling BPF data
Fix the issue by also defining _GNU_SOURCE in timerlat_bpf.c.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20250430144651.621766-1-tglozar@redhat.com
Fixes: e34293ddce ("rtla/timerlat: Add BPF skeleton to collect samples")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Introduce a mount option to allow sysadmins to specify the maximum size
of an atomic write. If the filesystem can work with the supplied value,
that becomes the new guaranteed maximum.
The value mustn't be too big for the existing filesystem geometry (max
write size, max AG/rtgroup size). We dynamically recompute the
tr_atomic_write transaction reservation based on the given block size,
check that the current log size isn't less than the new minimum log size
constraints, and set a new maximum.
The actual software atomic write max is still computed based off of
tr_atomic_ioend the same way it has for the past few commits. Note also
that xfs_calc_atomic_write_log_geometry is non-static because mkfs will
need that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Update the limits returned from xfs_get_atomic_write_{min, max, max_opt)().
No reflink support always means no CoW-based atomic writes.
For updating xfs_get_atomic_write_min(), we support blocksize only and that
depends on HW or reflink support.
For updating xfs_get_atomic_write_max(), for no reflink, we are limited to
blocksize but only if HW support. Otherwise we are limited to combined
limit in mp->m_atomic_write_unit_max.
For updating xfs_get_atomic_write_max_opt(), ultimately we are limited by
the bdev atomic write limit. If xfs_get_atomic_write_max() does not report
> 1x blocksize, then just continue to report 0 as before.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: update comments in the helper functions]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Now that CoW-based atomic writes are supported, update the max size of an
atomic write for the data device.
The limit of a CoW-based atomic write will be the limit of the number of
logitems which can fit into a single transaction.
In addition, the max atomic write size needs to be aligned to the agsize.
Limit the size of atomic writes to the greatest power-of-two factor of the
agsize so that allocations for an atomic write will always be aligned
compatibly with the alignment requirements of the storage.
Function xfs_atomic_write_logitems() is added to find the limit the number
of log items which can fit in a single transaction.
Amend the max atomic write computation to create a new transaction
reservation type, and compute the maximum size of an atomic write
completion (in fsblocks) based on this new transaction reservation.
Initially, tr_atomic_write is a clone of tr_itruncate, which provides a
reasonable level of parallelism. In the next patch, we'll add a mount
option so that sysadmins can configure their own limits.
[djwong: use a new reservation type for atomic write ioends, refactor
group limit calculations]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
[jpg: rounddown power-of-2 always]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Add xfs_file_dio_write_atomic() for dedicated handling of atomic writes.
Now HW offload will not be required to support atomic writes and is
an optional feature.
CoW-based atomic writes will be supported with out-of-places write and
atomic extent remapping.
Either mode of operation may be used for an atomic write, depending on the
circumstances.
The preferred method is HW offload as it will be faster. If HW offload is
not available then we always use the CoW-based method. If HW offload is
available but not possible to use, then again we use the CoW-based method.
If available, HW offload would not be possible for the write length
exceeding the HW offload limit, the write spanning multiple extents,
unaligned disk blocks, etc.
Apart from the write exceeding the HW offload limit, other conditions for
HW offload usage can only be detected in the iomap handling for the write.
As such, we use a fallback method to issue the write if we detect in the
->iomap_begin() handler that HW offload is not possible. Special code
-ENOPROTOOPT is returned from ->iomap_begin() to inform that HW offload is
not possible.
In other words, atomic writes are supported on any filesystem that can
perform out of place write remapping atomically (i.e. reflink) up to
some fairly large size. If the conditions are right (a single correctly
aligned overwrite mapping) then the filesystem will use any available
hardware support to avoid the filesystem metadata updates.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
When completing a CoW-based write, each extent range mapping update is
covered by a separate transaction.
For a CoW-based atomic write, all mappings must be changed at once, so
change to use a single transaction.
Note that there is a limit on the amount of log intent items which can be
fit into a single transaction, but this is being ignored for now since
the count of items for a typical atomic write would be much less than is
typically supported. A typical atomic write would be expected to be 64KB
or less, which means only 16 possible extents unmaps, which is quite
small.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: add tr_atomic_ioend]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
For when large atomic writes (> 1x FS block) are supported, there will be
various occasions when HW offload may not be possible.
Such instances include:
- unaligned extent mapping wrt write length
- extent mappings which do not cover the full write, e.g. the write spans
sparse or mixed-mapping extents
- the write length is greater than HW offload can support
- no hardware support at all
In those cases, we need to fallback to the CoW-based atomic write mode. For
this, report special code -ENOPROTOOPT to inform the caller that HW
offload-based method is not possible.
In addition to the occasions mentioned, if the write covers an unallocated
range, we again judge that we need to rely on the CoW-based method when we
would need to allocate anything more than 1x block. This is because if we
allocate less blocks that is required for the write, then again HW
offload-based method would not be possible. So we are taking a pessimistic
approach to writes covering unallocated space.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: various cleanups]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
For CoW-based atomic writes, reuse the infrastructure for reflink CoW fork
support.
Add ->iomap_begin() callback xfs_atomic_write_cow_iomap_begin() to create
staging mappings in the CoW fork for atomic write updates.
The general steps in the function are as follows:
- find extent mapping in the CoW fork for the FS block range being written
- if part or full extent is found, proceed to process found extent
- if no extent found, map in new blocks to the CoW fork
- convert unwritten blocks in extent if required
- update iomap extent mapping and return
The bulk of this function is quite similar to the processing in
xfs_reflink_allocate_cow(), where we try to find an extent mapping; if
none exists, then allocate a new extent in the CoW fork, convert unwritten
blocks, and return a mapping.
Performance testing has shown the XFS_ILOCK_EXCL locking to be quite
a bottleneck, so this is an area which could be optimised in future.
Christoph Hellwig contributed almost all of the code in
xfs_atomic_write_cow_iomap_begin().
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: add a new xfs_can_sw_atomic_write to convey intent better]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Currently the size of atomic write allowed is fixed at the blocksize.
To start to lift this restriction, partly refactor
xfs_report_atomic_write() to into helpers -
xfs_get_atomic_write_{min, max}() - and use those helpers to find the
per-inode atomic write limits and check according to that.
Also add xfs_get_atomic_write_max_opt() to return the optimal limit, and
just return 0 since large atomics aren't supported yet.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Refactor xfs_reflink_end_cow_extent() into separate parts which process
the CoW range and commit the transaction.
This refactoring will be used in future for when it is required to commit
a range of extents as a single transaction, similar to how it was done
pre-commit d6f215f359.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Add a BMAPI flag to provide a hint to the block allocator to align extents
according to the extszhint.
This will be useful for atomic writes to ensure that we are not being
allocated extents which are not suitable (for atomic writes).
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Currently only HW which can write at least 1x block is supported.
For supporting atomic writes > 1x block, a CoW-based method will also be
used and this will not be resticted to using HW which can write >= 1x
block.
However for deciding if HW-based atomic writes can be used, we need to
start adding checks for write length < HW min, which complicates the
code. Indeed, a statx field similar to unit_max_opt should also be
added for this minimum, which is undesirable.
HW which can only write > 1x blocks would be uncommon and quite weird,
so let's just not support it.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the transaction reservation code, hoist the logic that computes the
reservation needed to finish one log intent item into separate helper
functions. These will be used in subsequent patches to estimate the
number of blocks that an online repair can commit to reaping in the same
transaction as the change committing the new data structure.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Add selected helpers to estimate the transaction reservation required to
write various log intent and buffer items to the log. These helpers
will be used by the online repair code for more precise estimations of
how much work can be done in a single transaction.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Separate out setting buftarg atomic writes limits into a dedicated
function, xfs_configure_buftarg_atomic_writes(), to keep the specific
functionality self-contained.
For naming consistency, rename xfs_setsize_buftarg() ->
xfs_configure_buftarg().
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
[jpg: separate out from patch "xfs: ignore HW which ..."]
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In future we will want to be able to check if specifically HW offload-based
atomic writes are possible, so rename xfs_inode_can_atomicwrite() ->
xfs_inode_can_hw_atomicwrite().
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[djwong: add an underscore to be consistent with everything else]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
It's silly to call xfs_setsize_buftarg from xfs_alloc_buftarg with the
block device LBA size because we don't need to ask the block layer to
validate a geometry number that it provided us. Instead, set the
preliminary bt_meta_sector* fields to the LBA size in preparation for
reading the primary super.
However, we still want to flush and invalidate the pagecache for all
three block devices before we start reading metadata from those devices,
so call sync_blockdev() per bdev in xfs_alloc_buftarg().
This will enable a subsequent patch to validate hw atomic write geometry
against the filesystem geometry.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
[jpg: call sync_blockdev() from xfs_alloc_buftarg()]
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
XFS will be able to support large atomic writes (atomic write > 1x block)
in future. This will be achieved by using different operating methods,
depending on the size of the write.
Specifically a new method of operation based in FS atomic extent remapping
will be supported in addition to the current HW offload-based method.
The FS method will generally be appreciably slower performing than the
HW-offload method. However the FS method will be typically able to
contribute to achieving a larger atomic write unit max limit.
XFS will support a hybrid mode, where HW offload method will be used when
possible, i.e. HW offload is used when the length of the write is
supported, and for other times FS-based atomic writes will be used.
As such, there is an atomic write length at which the user may experience
appreciably slower performance.
Advertise this limit in a new statx field, stx_atomic_write_unit_max_opt.
When zero, it means that there is no such performance boundary.
Masks STATX{_ATTR}_WRITE_ATOMIC can be used to get this new field. This is
ok for older kernels which don't support this new field, as they would
report 0 in this field (from zeroing in cp_statx()) already. Furthermore
those older kernels don't support large atomic writes - apart from block
fops, but there would be consistent performance there for atomic writes
in range [unit min, unit max].
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
We frequently use 'bcachefs list_journal -a' for debugging, as it
provides a record of all btree transactions, and a history of what
happened.
But it's not so useful if we immediately discard journal buckets right
after they're no longer dirty.
This tweaks journal reclaim to only discard when we're low on space,
keeping the journal mostly un-discarded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we go emergency read-only, make sure we do a final write_super() to
persist counters and error counts - this can be critical for piecing
together what fsck was doing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We often filter out EROFS errors to avoid log spew after an emergency
shutdown - journal_shutdown is just another emergency shutdown error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When executing "make -C tools/tracing/rtla" on LoongArch, there exists
the following error:
src/utils.c:237:24: error: '__NR_sched_setattr' undeclared
Just define __NR_sched_setattr for LoongArch if not exist.
Link: https://lore.kernel.org/20250422074917.25771-1-yangtiezhu@loongson.cn
Reported-by: Haiyong Sun <sunhaiyong@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
A pre-existing valid cfid returned from find_or_create_cached_dir might
race with a lease break, meaning open_cached_dir doesn't consider it
valid, and thinks it's newly-constructed. This leaks a dentry reference
if the allocation occurs before the queued lease break work runs.
Avoid the race by extending holding the cfid_list_lock across
find_or_create_cached_dir and when the result is checked.
Cc: stable@vger.kernel.org
Reviewed-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Intel hybrid processors have CPUs of different capacity. Populate the
interface /sys/devices/system/cpu/cpuN/cpu_capacity.
This interface uses the per-CPU variable `cpu_scale`. On x86 this
variable has no other use besides feeding the sysfs entries. Initialize
it when setting CPU capacity for the scheduler and scale-invariant code.
Feed it with arch_scale_cpu_capacity() as it gives capacity normalized
to the interval [0, SCHED_CAPACITY_SCALE].
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
arch_topology.c provides functionality to parse and scale CPU capacity.
It also provides a corresponding sysfs interface. Some architectures
parse and scale CPU capacity differently as per their own needs. On
Intel processors, for instance, it is responsibility of the Intel
P-state driver.
Relocate the implementation of that interface to a common location in
topology.c. Architectures can use the interface and populate it using
their own mechanisms.
An alternative approach would be to compile arch_topology.c even if
not needed only to get this interface. This approach would create
duplicated and conflicting functionality and data structures.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20250419025504.9760-2-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
