Drop use of the address field in the ad7606 driver. This field was
duplicating the same info that was already in the channel and scan_index
fields. This is one less thing to have to hold in your mind when reading
the code.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250318-iio-adc-ad7606-improvements-v2-7-4b605427774c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix several issues with kernel-doc comments in ad7606.h:
* Add missing ":" to @param names.
* Fix order of @param names.
* Add some missing parameters.
* Remove some non-existent parameters.
* Fix alignment and wrapping.
* Fix some spelling.
`./scripts/kernel-doc -v -none drivers/iio/adc/ad7606*` is happy now.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250318-iio-adc-ad7606-improvements-v2-5-4b605427774c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use devm_mutex_init() in ad7606_probe(). Mutexes should be cleaned up
on driver removal.
Also add missing include while we are touching this.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250318-iio-adc-ad7606-improvements-v2-4-4b605427774c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add max sample rates for all of the chips. Previously, only one chip had
this field populated. The fallback value for the initial sampling
frequency can be removed now that all chips have a max sample rate
defined.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250318-iio-adc-ad7606-improvements-v2-3-4b605427774c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some devices have an internal clock used by the events to space the
conversions.
The max1363 introduced the option in
commit 168c9d95a9 ("iio:adc:max1363 move from staging.")
and ad799x in
commit ba1d79613d ("staging:iio:ad799x: Use event spec for threshold
hysteresis")
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Link: https://patch.msgid.link/20250321-abi-oversampling-events-frequency-v1-1-794c1ab2f079@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BD79124 is a 12-bit, 8-channel, SAR ADC. The ADC supports
an automatic measurement mode, with an alarm interrupt for out-of-window
measurements. The window is configurable for each channel.
The I2C protocol for manual start of the measurement and data reading is
somewhat peculiar. It requires the master to do clock stretching after
sending the I2C slave-address until the slave has captured the data.
Needless to say this is not well suopported by the I2C controllers.
Thus do not support the BD79124's manual measurement mode but implement
the measurements using automatic measurement mode, relying on the
BD79124's ability of storing latest measurements into register.
Support also configuring the threshold events for detecting the
out-of-window events.
The BD79124 keeps asserting IRQ for as long as the measured voltage is
out of the configured window. Thus, prevent the user-space from choking
on the events and mask the received event for a fixed duration (1 second)
when an event is handled.
The ADC input pins can be also configured as general purpose outputs.
Make those pins which don't have corresponding ADC channel node in the
device-tree controllable as GPO.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/ca3886c9abcb268ca976e62cd7da28bf5d6e6382.1742560649.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The new devm_iio_adc_device_alloc_chaninfo_se() -helper is intended to
help drivers avoid open-coding the for_each_node -loop for getting the
channel IDs. The helper provides standard way to detect the ADC channel
nodes (by the node name), and a standard way to convert the "reg"
-properties to channel identification numbers, used in the struct
iio_chan_spec. Furthermore, the helper can optionally check the found
channel IDs are smaller than given maximum. This is useful for callers
which later use the IDs for example for indexing a channel data array.
The original driver treated all found child nodes as channel nodes. The
new helper requires channel nodes to be named channel[@N]. This should
help avoid problems with devices which may contain also other but ADC
child nodes. Quick grep from arch/* with the sun20i-gpadc's compatible
string didn't reveal any in-tree .dts with channel nodes named
otherwise. Also, same grep shows all the in-tree .dts seem to have
channel IDs between 0..num of channels.
Use the new helper.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/e367a803c0d625e60c9fca16c55a25eee06b5a89.1742560649.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The new devm_iio_adc_device_alloc_chaninfo_se() -helper is intended to
help drivers avoid open-coding the for_each_node -loop for getting the
channel IDs. The helper provides standard way to detect the ADC channel
nodes (by the node name), and a standard way to convert the "reg"
-properties to channel identification numbers, used in the struct
iio_chan_spec. Furthermore, the helper can optionally check the found
channel IDs are smaller than given maximum. This is useful for callers
which later use the IDs for example for indexing a channel data array.
The original driver treated all found child nodes as channel nodes. The
new helper requires channel nodes to be named channel[@N]. This should
help avoid problems with devices which may contain also other but ADC
child nodes. Quick grep from arch/* with the rzg2l_adc's compatible
string didn't reveal any in-tree .dts with channel nodes named
otherwise. Also, same grep shows all the .dts seem to have channel IDs
between 0..num of channels.
Use the new helper.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/e84ccff01070eaee3dd1ae2d7e109f963168f586.1742560649.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are ADC ICs which may have some of the AIN pins usable for other
functions. These ICs may have some of the AIN pins wired so that they
should not be used for ADC.
A common way of marking pins that can be used as ADC inputs is to add
corresponding channel@N nodes in the device tree as described in the ADC
binding yaml.
Add couple of helper functions which can be used to retrieve the channel
information from the device node.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/f1d8b3e15237947738912c0d297b3e1e21d8b03e.1742560649.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are a few use-cases where child nodes with a specific name need to
be parsed. Code like:
fwnode_for_each_child_node()
if (fwnode_name_eq())
...
can be found from a various drivers/subsystems. Adding a macro for this
can simplify things a bit.
In a few cases the data from the found nodes is later added to an array,
which is allocated based on the number of found nodes. One example of
such use is the IIO subsystem's ADC channel nodes, where the relevant
nodes are named as channel[@N].
Add helpers for iterating and counting device's sub-nodes with certain
name instead of open-coding this in every user.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/2767173b7b18e974c0bac244688214bd3863ff06.1742560649.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add binding document for the ROHM BD79124 ADC / GPO.
ROHM BD79124 is a 8-channel, 12-bit ADC. The input pins can also be used
as general purpose outputs.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/e16f54b6214b0d796216729a7e29b8f7be9ae19e.1742560649.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch allows writing u64 values to the ADMV8818's high and low-pass
filter frequencies. It includes the following changes:
- Rejects negative frequencies in admv8818_write_raw.
- Adds a write_raw_get_fmt function to admv8818's iio_info, returning
IIO_VAL_INT_64 for the high and low-pass filter 3dB frequency channels.
Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Brian Pellegrino <bpellegrino@arka.org>
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-7-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Corrects the upper range of LPF Band 4 from 18.5 GHz to 18.85 GHz per
the ADMV8818 datasheet
Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-3-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adds two properties to add a margin when automatically finding the
corner frequencies.
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250328174831.227202-2-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The SARADC IP on the GXLX SoC itself is identical to the one found on
GXL SoCs. However, GXLX SoCs require poking the first three bits in the
MESON_SAR_ADC_REG12 register to get the three MPLL clocks (used as clock
generators for the audio frequencies) to work.
The reason why there are MPLL clock bits in the ADC register space is
entirely unknown and it seems that nobody is able to comment on this.
So clearly mark this as a workaround and add a warning so users are
notified that this workaround can change (once we know what these bits
actually do).
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250330101922.1942169-3-martin.blumenstingl@googlemail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a compatible string for the GXLX SoC. It's very similar to GXL but
has three additional bits in MESON_SAR_ADC_REG12 for the three MPLL
clocks.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250330101922.1942169-2-martin.blumenstingl@googlemail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some BH1750 sensors require a hardware reset before they can be
detected on the I2C bus. This implementation adds support for an
optional reset GPIO that can be specified in the device tree.
The reset sequence pulls the GPIO low and then high before initializing
the sensor, which enables proper detection with tools like i2cdetect.
This is particularly important for sensors that power on in an
undefined state.
Signed-off-by: Sergio Perez <sergio@pereznus.es>
Link: https://patch.msgid.link/20250324135920.6802-2-sergio@pereznus.es
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some BH1750 sensors require a hardware reset via GPIO before they can
be properly detected on the I2C bus. Add a new reset-gpios property
to the binding to support this functionality.
The reset-gpios property allows specifying a GPIO that will be toggled
during driver initialization to reset the sensor.
Signed-off-by: Sergio Perez <sergio@pereznus.es>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250324135920.6802-1-sergio@pereznus.es
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
SPI devices should use unevaluatedProperties:false instead of
additionalProperties:false, to allow any SPI device properties listed in
spi-peripheral-props.yaml.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250324125313.82226-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250324125313.82226-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce struct for device match of_device_id to avoid relying on fallback
mechanisms, which could lead to false matches against other AD9832 variants
in the future.
Suggested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Siddharth Menon <simeddon@gmail.com>
Link: https://patch.msgid.link/20250322163211.253009-1-simeddon@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On Intel platforms, the HID_USAGE_SENSOR_HUMAN_PROXIMITY report size is 16
bits. This patch adds support for handling 16-bit report sizes for the
HID_USAGE_SENSOR_HUMAN_PROXIMITY usage in the HID sensor proximity driver.
Previously, the driver only supported 8-bit and 32-bit report sizes. With
this change, the driver can now correctly process 16-bit proximity data,
ensuring accurate human presence detection on platforms where this report
size is used.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250317013634.4117399-1-lixu.zhang@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Regmap return values sometimes are checked being less than zero
to trigger error handling. Sometimes this is checked for being not
zero. Unify the situation and check for not being zero.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250313165049.48305-4-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace the interrupt enable member variable to the regmap cache. This
makes the function set_interrupts() obsolete. The interrupt enable
register is written when the driver is probed. Thus it is perfectly
cacheable.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250313165049.48305-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use regmap cache to replace the maintenance of the interrupt mapping
state by a member variable intio. The interrupt mapping is initialized
when the driver is probed, and it is perfectly cacheable.
The patch will still leave the function set_interrupts(). A follow up
patch takes care of it, when cleaning up the INT enable register
variable.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250313165049.48305-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
TDM mode on the adau7118 is dsp_a compatible. Set SPT_SAI_MODE on the
SPT_CTRL1 register to 1 for TDM mode when the DAI is operating in
dsp_a mode.
Signed-off-by: Michael Sikora <michael.sikora@axis.com>
Link: https://patch.msgid.link/20250411-adau7118-dsp-a-v1-1-be3fb487a6ac@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Calculating the DSS id (index of a steered register) currently
requires reading state from the hwconfig table and that currently
requires dynamically allocating memory. The GuC based register capture
(for dev core dumps) includes this index as part of the register name
in the dump. However, it was calculating said index at the time of the
dump for every dump. That is wasteful. It also breaks anyone trying to
do the dump at a time when memory allocations are not allowed.
So rather than calculating on every print, just calculate at start of
day when creating the register list in the first place.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250417213303.3021243-1-John.C.Harrison@Intel.com
The printing code was doing a test on which list a register was in to
decide whether it is steered or not. That might be valid at this
moment but there may be other reasons for extended lists in the
future. Plus, there is a flag specifically for identifying steered
registers. So, just use that instead - it is simpler and safer.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250417195215.3002210-3-John.C.Harrison@Intel.com
The list of registers to capture on a GPU hang includes some that
require steering. Unfortunately, the flag to say this was being wiped
to due a missing OR on the assignment of the next flag field.
Fix that.
Fixes: b170d696c1 ("drm/xe/guc: Add XE_LP steered register lists")
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Link: https://lore.kernel.org/r/20250417195215.3002210-2-John.C.Harrison@Intel.com
-----BEGIN PGP SIGNATURE-----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=+YLw
-----END PGP SIGNATURE-----
Merge tag 'for-6.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- subpage mode fixes:
- access correct object (folio) when looking up bit offset
- fix assertion condition for number of blocks per folio
- fix upper boundary of locking range in hole punch
- zoned fixes:
- fix potential deadlock caught by lockdep when zone reporting and
device freeze run in parallel
- fix zone write pointer mismatch and NULL pointer dereference when
metadata are converted from DUP to RAID1
- fix error handling when reloc inode creation fails
- in tree-checker, unify error code for header level check
- block layer: add helpers to read zone capacity
* tag 'for-6.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: skip reporting zone for new block group
block: introduce zone capacity helper
btrfs: tree-checker: adjust error code for header level check
btrfs: fix invalid inode pointer after failure to create reloc inode
btrfs: zoned: return EIO on RAID1 block group write pointer mismatch
btrfs: fix the ASSERT() inside GET_SUBPAGE_BITMAP()
btrfs: avoid page_lockend underflow in btrfs_punch_hole_lock_range()
btrfs: subpage: access correct object when reading bitmap start in subpage_calc_start_bit()
xe_svm_range_alloc() returns ERR_PTR(-ENOMEM) on failure and there is a
dereference of "range" after that:
--> range->gpusvm = gpusvm;
In xe_svm_range_alloc(), when memory allocation fails return NULL
instead to handle this situation.
Fixes: 99624bdff8 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/adaef4dd-5866-48ca-bc22-4a1ddef20381@stanley.mountain/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250323124907.3946370-1-harshit.m.mogalapalli@oracle.com
