If an error occurs after a successful stm32_ospi_dma_setup() call, some
dma_release_channel() calls are needed to release some resources, as
already done in the remove function.
Fixes: 79b8a705e2 ("spi: stm32: Add OSPI driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/2674c8df1d05ab312826b69bfe9559f81d125a0b.1744975624.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Now there are no users of the return value of the drm_panel_prepare(),
drm_panel_unprepare(), drm_panel_enable() and drm_panel_disable() calls.
Usually these calls are performed from the atomic callbacks, where it is
impossible to return an error. Stop returning error codes and return
void instead.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-7-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Follow the example of other drivers and ignore return values of the
drm_panel_prepare() / unprepare() / enable() / disable() calls. There is
no possible error recovery, so the driver just logs a message.
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-6-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The analogix_dp_prepare_panel() is now only calling a corresponding
drm_panel function. Inline it to simplify the code.
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-5-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The analogix_dp_prepare_panel() function is called from bridge's
atomic_pre_enable() and atomic_post_disable() callbacks, which can not
happen simultaneously. Drop the useless mutex.
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-4-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
After previous cleanup all calling sites pass true as is_modeset_prepare
argument to analogix_dp_prepare_panel(). Drop dead code depending on
that argument being false.
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-2-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The analogix_dp_prepare_panel() returns immediately if there is no
attached panel. Drop several calls to this function which are performed
when dp->plat_data->panel is NULL.
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-1-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add the firmware-name property for SCP core0 so the firmware can be
loaded from its canonical location in the linux-firmware repository.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250421-scp-dual-core-mt8390-v2-5-c84117a959a9@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The SCP is currently described in the Devicetree as a single-core
processor, but really it is a cluster with two cores. Describe the full
cluster but enable only core0 on the current mt8188 platforms since
that's the only one usable with the upstream firmware.
Co-developed-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Co-developed-by: Jason Chen <jason-ch.chen@mediatek.corp-partner.google.com>
Signed-off-by: Jason Chen <jason-ch.chen@mediatek.corp-partner.google.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250421-scp-dual-core-mt8390-v2-4-c84117a959a9@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
In lwtunnel_{output|xmit}(), dev_xmit_recursion() may be called in
preemptible scope for PREEMPT kernels. This patch disables BHs before
calling dev_xmit_recursion(). BHs are re-enabled only at the end, since
we must ensure the same CPU is used for both dev_xmit_recursion_inc()
and dev_xmit_recursion_dec() (and any other recursion levels in some
cases) in order to maintain valid per-cpu counters.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Closes: https://lore.kernel.org/netdev/CAADnVQJFWn3dBFJtY+ci6oN1pDFL=TzCmNbRgey7MdYxt_AP2g@mail.gmail.com/
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Closes: https://lore.kernel.org/netdev/m2h62qwf34.fsf@gmail.com/
Fixes: 986ffb3a57 ("net: lwtunnel: fix recursion loops")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416160716.8823-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When building gpio-ich.c for a platform that does not have IO port
access like s390, there are several errors due to the use of inl() and
outl() throughout the driver:
drivers/gpio/gpio-ich.c: In function 'ichx_read_bit':
include/asm-generic/io.h:578:14: error: call to '_inl' declared with attribute error: inl() requires CONFIG_HAS_IOPORT
Only allow compile testing when the targeted platform selects HAS_IOPORT
so that there are no compile time errors.
Fixes: f3592d252f ("gpio: ich: enable building with COMPILE_TEST=y")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504171941.g1yXja0j-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250418-gpio-ich-fix-build-without-ioport-v1-1-83fc753438ec@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Zero-initialize TCP header via memset() to avoid garbage values that
may affect checksum or behavior during test transmission.
Also zero-fill allocated payload and padding regions using memset()
after skb_put(), ensuring deterministic content for all outgoing
test packets.
Fixes: 3e1e58d64c ("net: add generic selftest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416160125.2914724-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
lkp reported a warning about missing prototype for a recent patch.
The kernel-doc style comments are out of sync, move them to the right
function.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504190615.g9fANxHw-lkp@intel.com/
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
[mszyprow: reformatted subject]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250422114034.3535515-1-balbirs@nvidia.com
Pioneer DJ DJM-V10 is a high end mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Input and output is enabled by this patch:
- 12 channels (6 stereo) in each direction
- 44 100 / 48 000 / 96 000 Hz
- S24_3LE
Capture channels can be configured through alsamixer.
Playback channels are fixed and controlled by hardware knobs on the mixer.
Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Link: https://patch.msgid.link/20250421155953.4440-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_lib_malloc_pages() is commonly used for allocating buffers during
the hw_params callback, whereas preallocating buffers goes through
preallocate_pcm_pages().
Having the same terminology in the failure debug messages in both
misleads developers.
Change the debug message in snd_pcm_lib_malloc_pages() to use the
term "allocate" to match its intended use.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250421085244.377228-1-wenst@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
log context:seqno of the fence during timeout rather
than logging fence pointer.
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is load usermode queue based on FW support for gfx12.
CP Ucode FW Vesion: [PFP = 2840, ME = 2780, MEC = 3050, MES = 123]
v2: Addressed review comments from Alex
- Just check the firmware versions directly.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is load usermode queue based on FW support for gfx11.
CP Ucode FW version: [PFP = 2530, ME = 2390, MEC = 2600, MES = 120]
v2: Addressed review comments from Alex.
- Just check the firmware versions directly.
v3: Firmware version checks only for Navi3x(by Alex).
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit updates the dm_force_atomic_commit function to replace the
usage of PTR_ERR_OR_ZERO with IS_ERR for checking error states after
retrieving the Connector (drm_atomic_get_connector_state), CRTC
(drm_atomic_get_crtc_state), and Plane (drm_atomic_get_plane_state)
states.
The function utilized PTR_ERR_OR_ZERO for error checking. However, this
approach is inappropriate in this context because the respective
functions do not return NULL; they return pointers that encode errors.
This change ensures that error pointers are properly checked using
IS_ERR before attempting to dereference.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s/userqueue/userq/
1. remove the mix of amdgpu_userqueue and amdgpu_userq
2. to be consistent with other amdgpu_userq_fence.c
3. it's shorter
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
suspend/resume -> evict/restore
Rename to avoid confusion with the system suspend
and resume helpers.
v2: update error messages
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to wait for the last fence before unmapping. This
also fixes a memory leak in amdgpu_userqueue_cleanup()
when the fence isn't signalled.
Fixes: b0db33c8c5 ("drm/amdgpu/userq: rework front end call sequence")
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was missed when the map and unmap were split out
of the mqd create and destroy functions.
Fixes: b0db33c8c5 ("drm/amdgpu/userq: rework front end call sequence")
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track the state of the queue rather than simple active vs
not. This is needed for other states (hung, preempted, etc.).
While we are at it, move the state tracking into the user
queue front end code.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If user queues are disabled for all IPs in the case
of suspend and resume and for gfx/compute in the case
of enforce isolation, we can return early.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rn_vbios_smu_set_dprefclk() was added in 2019 by
commit 4edb6fc918 ("drm/amd/display: Add Renoir clock manager")
rv1_vbios_smu_set_dprefclk() was also added in 2019 by
commit dc88b4a684 ("drm/amd/display: make clk mgr soc specific")
neither have been used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
radeon_fence_wait_any() last use was removed in 2023's
commit 254986e324 ("drm/radeon: Use the drm suballocation manager
implementation.")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The last use of r600_hdmi_audio_workaround() was removed by 2014's
commit 6e72376dcc ("radeon/audio: consolidate audio_mode_set()
functions")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print a kernel message when the scrub bit of status register is set to
indicate that errors are being logged by the scrub.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since b255ce4388, it is possible that the CRTC timing
information for the preferred mode has not yet been
calculated while amdgpu_dm_connector_mode_valid() is running.
In this case use the CRTC timing information of the actual mode.
Fixes: b255ce4388 ("drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()")
Closes: https://lore.kernel.org/all/ed09edb167e74167a694f4854102a3de6d2f1433.camel@irl.hu/
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4085
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The minimum value of the dst_y_prefetch_equ was not correct
in prefetch calculation whice causes OPTC underflow.
[How]
Add the min operation of dst_y_prefetch_equ in prefetch calculation
for legacy DML.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: TungYu Lu <tungyu.lu@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There are several gaps that can result in SubVP being enabled with
incompatible HW cursor sizes, and unjust restrictions to cursor size due
to wrong predictions on future usage of SubVP
[HOW]
- remove "prediction" logic in favor of tagging based on previous SubVP
usage
- block SubVP if current HW cursor settings are incompatible
- provide interface for DM to determine if HW cursor should be disabled
due to an attempt to enable SubVP
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a helper to get a mask of IPs which support user queues.
Use this in the INFO IOCTL to get the IP mask to replace
the current code.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add queue id support to the user queue wait IOCTL
drm_amdgpu_userq_wait structure.
This is required to retrieve the wait user queue and maintain
the fence driver references in it so that the user queue in
the same context releases their reference to the fence drivers
at some point before queue destruction.
Otherwise, we would gather those references until we
don't have any more space left and crash.
v2: Modify the UAPI comment as per the mesa and libdrm UAPI comment.
Libdrm MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/408
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34493
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that we initialize the MQD as a secure queue.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Pixel rate dividor was not programmed correctly for 1 pixel per cycle
configuration for empty tu case.
[How]
Included check for empty tu when pixel rate dividor values were selected.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Recent findings show negligible power savings between IPS2 and RCG
during static desktop. In fact, DCN related clocks are higher
when IPS2 is enabled vs RCG.
RCG_IN_ACTIVE is also the default policy for another OS supported by
DC, and it has faster entry/exit.
[How]
Remove previous logic that checked for IPS2 support, and just default
to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`.
Fixes: 199888aa25 ("drm/amd/display: Update IPS default mode for DCN35/DCN351")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
not all the asic using the same code path.
need to revisit and limit the impact.
This reverts commit 32be4e39f4.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read
reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier
may not support this register, assume the mandatory value is programmed
by the LTTPR to avoid AUX timeout issues.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The ACPI EDID in the BIOS of a Lenovo laptop includes 3 blocks, but
dm_helpers_probe_acpi_edid() has a start that is 'char'. The 3rd
block index starts after 255, so it can't be indexed properly.
This leads to problems with the display when the EDID is parsed.
[How]
Change the variable type to 'short' so that larger values can be indexed.
Cc: Renjith Pananchikkal <renjith.pananchikkal@amd.com>
Reported-by: Mark Pearson <mpearson@lenovo.com>
Suggested-by: David Ober <dober@lenovo.com>
Fixes: c6a837088b ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the PCH macros switched to use struct intel_display, we have a
number of files that no longer need struct drm_i915_private or anything
else from i915_drv.h anymore. Remove the #include, and add the missing
includes that were previously implicit.
v2: Drop even more of the includes
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/5dc9e6a98461c344febac4c645875d8688eba906.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and
accept a struct intel_display pointer, use that instead of struct
drm_i915_private pointer in display code.
This is done naively by running:
$ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \
$(find drivers/gpu/drm/i915/display -name "*.c")
and fixing the fallout, i.e. removing unused local i915 variables and
adding display variables where needed.
v2: Rebase
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The #ifdefs only guard code that is also guarded by in_ia32_syscall(),
which already contains the same #ifdef itself.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20240910-x86-vdso-ifdef-v1-2-877c9df9b081@linutronix.de
Replace the open-coded ifdefs in C sources files with IS_ENABLED().
This makes the code easier to read and enables the compiler to typecheck
also the disabled parts, before optimizing them away.
To make this work, also remove the ifdefs from declarations of used
variables.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20240910-x86-vdso-ifdef-v1-1-877c9df9b081@linutronix.de
Add the clk-measurer clocks IDs for the Amlogic S4 SoC family.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250415-clk-measure-v3-5-9b8551dd33b4@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add the clk-measurer clocks IDs for the Amlogic C3 SoC family.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250415-clk-measure-v3-4-9b8551dd33b4@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
