Rename the "data" variable inside msi_wmi_platform_read() to avoid
a name collision when the driver adds support for a state container
struct (that is to be called "data" too) in the future.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some users report the Alienware m16 R1 models, support G-Mode. This was
manually verified by inspecting their ACPI tables.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-awcc-support-v1-1-09a130ec4560@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
IORING_OP_RECV_ZC requests take a zcrx object id via sqe::zcrx_ifq_idx,
which binds it to the corresponding if / queue. However, we don't return
that id back to the user. It's fine as currently there can be only one
zcrx and the user assumes that its id should be 0, but as we'll need
multiple zcrx objects in the future let's explicitly pass it back on
registration.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8714667d370651962f7d1a169032e5f02682a73e.1744722517.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Observe that ibx_irq_reset() is really ibx_display_irq_reset(). Make it
so. Move to display, and call it directly from gen8_display_irq_reset()
instead of gen8_irq_reset().
Remove a nearby ancient stale comment while at it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250409184702.3790548-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add helper functions to create a device on the auxiliary bus.
This is meant for fairly simple usage of the auxiliary bus, to avoid having
the same code repeated in the different drivers.
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20250218-aux-device-create-helper-v4-1-c3d7dfdea2e6@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct Get Controller Packet Statistics (GCPS) 64-bit wide member
variables, as per DSP0222 v1.0.0 and forward specs. The Driver currently
collects these stats, but they are yet to be exposed to the user.
Therefore, no user impact.
Statistics fixes:
Total Bytes Received (byte range 28..35)
Total Bytes Transmitted (byte range 36..43)
Total Unicast Packets Received (byte range 44..51)
Total Multicast Packets Received (byte range 52..59)
Total Broadcast Packets Received (byte range 60..67)
Total Unicast Packets Transmitted (byte range 68..75)
Total Multicast Packets Transmitted (byte range 76..83)
Total Broadcast Packets Transmitted (byte range 84..91)
Valid Bytes Received (byte range 204..11)
Signed-off-by: Hari Kalavakunta <kalavakunta.hari.prasad@gmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Link: https://patch.msgid.link/20250410012309.1343-1-kalavakunta.hari.prasad@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When `jr3_pci_detach()` is called during device removal, it calls
`timer_delete_sync()` to stop the timer, but the timer expiry function
always reschedules the timer, so the synchronization is ineffective.
Call `timer_shutdown_sync()` instead. It does not matter that the timer
expiry function pointer is cleared, because the device is being removed.
Fixes: 07b509e658 ("Staging: comedi: add jr3_pci driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250415123901.13483-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vma start address should be substracted from the buffer's user data
address and not the other way around.
Cc: Tiffany Y. Yang <ynaffit@google.com>
Cc: stable <stable@kernel.org>
Fixes: 162c797314 ("binder: avoid user addresses in debug logs")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Tiffany Y. Yang <ynaffit@google.com>
Link: https://lore.kernel.org/r/20250325184902.587138-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
startup()/shutdown() callbacks access SIFIVE_SERIAL_IE_OFFS.
The register is also accessed from write() callback.
If console were printing and startup()/shutdown() callback
gets called, its access to the register could be overwritten.
Add port->lock to startup()/shutdown() callbacks to make sure
their access to SIFIVE_SERIAL_IE_OFFS is synchronized against
write() callback.
Fixes: 45c054d081 ("tty: serial: add driver for the SiFive UART")
Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Rule: add
Link: https://lore.kernel.org/stable/20250330003522.386632-1-ryotkkr98%40gmail.com
Link: https://lore.kernel.org/r/20250412001847.183221-1-ryotkkr98@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a codec driver for the Cirrus Logic CS48L32 audio DSP.
The CS48L32 is a low-power audio DSP with microphone inputs for
"Always on Voice" (i.e. voice trigger) and voice command processing.
It has a programmable Halo Core DSP and a variety of power-efficient
fixed-function audio processors, with configurable digital mixing
and routing.
There are two I2S/TDM audio serial ports.
Four analogue inputs are available through IN1. These feed into a
2-channel ADC through an analogue mux. There is an ALSA control for
each IN1 ADC channel to select which analogue input to use.
A dedicated digital mic (DMIC) PDM input is available on IN2.
Two PDM outputs can feed DMIC inputs on another codec or a host DMIC/PDM
input.
An on-board regulator provides a power supply or bias voltage to
attached microphones. Three switchable MICBIAS outputs are fed from this
allowing only the microphone in use to be powered-up. There are DAPM
widgets for these outputs: MICBIAS1A, MICBIAS1B and MICBIAS1C. The machine
driver must create a DAPM route from the required MICBIAS1x widget to the
INn input widgets to make the MICBIAS switch on when the audio input is
powered-up. For example if the microphone feeding CS48L32 pin IN1LN_1 is
powered from MICBIAS1A, the machine driver must create the path:
(sink) IN1LN_1 <----- (source) MICBIAS1A
Co-developed-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Co-developed-by: Qi Zhou <qi.zhou@cirrus.com>
Signed-off-by: Qi Zhou <qi.zhou@cirrus.com>
Co-developed-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com>
Signed-off-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250415115016.505777-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS48L32 is an Audio DSP with microphone inputs and SPI
control interface. It has a programmable DSP and a variety of
power-efficient fixed-function audio processors, with configurable
digital mixing and routing.
Most properties are core properties: supply regulators, gpios, clocks,
interrupt parent and SPI interface. The custom properties define
the configuration of the microphone inputs to match what is physically
attached to them.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patch.msgid.link/20250415115016.505777-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Specifically list various Cirrus Logic and Wolfson Micro codec header files
under include/sound/ within the ASoC section of MAINTAINERS. Note that not
all the include/sound/cs* files are part of ASoC, so more-specific patterns
are needed.
These files are all part of ASoC codec drivers, and are owned by specific
Cirrus Logic and Wolfson Micro sections of MAINTAINERS. But the overall
include/sound/* maintainership is only Takashi Iwai and Jaroslav Kysela.
So by default get_maintainer.pl would only show Takashi and Jaroslav as
maintainers for any patch that changes these files without changing any
code under sound/soc.
There is a separate MAINTAINERS section for ASoC, so the headers must be
added there to make the ASoC maintainers show up in get_maintainer.pl.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250415122927.512200-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Save the bus clock pointer in the of_serial_info structure, and use
that to disable the bus clock on suspend and re-enable it on resume.
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250411203828.1491595-4-elder@riscstar.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the necessary callbacks(write_atomic, write_thread, device_lock
and device_unlock) and CON_NBCON flag to switch the sifive console
driver to perform as nbcon console.
Both ->write_atomic() and ->write_thread() will check for console
ownership whenever they are accessing registers.
The ->device_lock()/unlock() will provide the additional serilization
necessary for ->write_thread() which is called from dedicated printing
thread.
Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250412002544.185038-1-ryotkkr98@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We recently added some locking to this function but this error path
was accidentally missed. Unlock before returning.
Fixes: ec27386de2 ("usb: typec: class: Fix NULL pointer access")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/Z_44tOtmml89wQcM@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SanDisk 3.2Gen1 Flash Drive, which VID:PID is in 0781:55a3,
just like Silicon Motion Flash Drive:
https://lore.kernel.org/r/20250401023027.44894-1-limiao870622@163.com
also needs the DELAY_INIT quirk, or it will randomly work incorrectly
(e.g.: lsusb and can't list this device info) when connecting Huawei
hisi platforms and doing thousand of reboot test circles.
Cc: stable <stable@kernel.org>
Signed-off-by: Miao Li <limiao@kylinos.cn>
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Link: https://lore.kernel.org/r/20250414062935.159024-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable tpgt in usbg_make_tpg() is defined as unsigned long and is
assigned to tpgt->tport_tpgt, which is defined as u16. This may cause an
integer overflow when tpgt is greater than USHRT_MAX (65535). I
haven't tried to trigger it myself, but it is possible to trigger it
by calling usbg_make_tpg() with a large value for tpgt.
I modified the type of tpgt to match tpgt->tport_tpgt and adjusted the
relevant code accordingly.
This patch is similar to commit 59c816c1f2 ("vhost/scsi: potential
memory corruption").
Signed-off-by: Chen Yufeng <chenyufeng@iie.ac.cn>
Link: https://lore.kernel.org/r/20250415065857.1619-1-chenyufeng@iie.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB IP-block found in most Qualcomm platforms is modelled in the
Linux kernel as 3 different independent device drivers, but as shown by
the already existing layering violations in the Qualcomm glue driver
they can not be operated independently.
With the current implementation, the glue driver registers the core and
has no way to know when this is done. As a result, e.g. the suspend
callbacks needs to guard against NULL pointer dereferences when trying
to peek into the struct dwc3 found in the drvdata of the child.
Even with these checks, there are no way to fully protect ourselves from
the race conditions that occur if the DWC3 is unbound.
Missing from the upstream Qualcomm USB support is handling of role
switching, in which the glue needs to be notified upon DRD mode changes.
Several attempts has been made through the years to register callbacks
etc, but they always fall short when it comes to handling of the core's
probe deferral on resources etc.
Moving to a model where the DWC3 core is instantiated in a synchronous
fashion avoids above described race conditions.
It is however not feasible to do so without also flattening the
DeviceTree binding, as assumptions are made in the DWC3 core and
frameworks used that the device's associated of_node will the that of
the core. Furthermore, the DeviceTree binding is a direct
representation of the Linux driver model, and doesn't necessarily
describe "the USB IP-block".
The Qualcomm DWC3 glue driver is therefor transitioned to initialize and
operate the DWC3 within the one device context, in synchronous fashion.
To provide a limited time backwards compatibility, a snapshot of the
driver is retained in a previous commit. As such no care is taken in the
dwc3-qcom driver for the qcom,dwc3 backwards compatibility.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250414-dwc3-refactor-v7-6-f015b358722d@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the upcoming transition to a model where DWC3 core and glue operate
on a single struct device the drvdata datatype will change to be owned
by the core.
The drvdata is however used by the Qualcomm DWC3 glue to pass the qcom
glue context around before the core is allocated.
Remove this problem, and clean up the code, by passing the dwc3_qcom
struct around during probe, instead of acquiring it from the drvdata.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250414-dwc3-refactor-v7-5-f015b358722d@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the core is integrated with glue, it's reasonable to assume that
the glue driver will have to touch the IP before/after the core takes
the hardware out and into reset. As such the glue must own these
resources and be allowed to turn them on/off outside the core's
handling.
Allow the platform or glue layer to indicate if the core logic for
clocks and resets should be skipped to deal with this.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250414-dwc3-refactor-v7-4-f015b358722d@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DWC3 IP block is handled by three distinct device drivers: XHCI,
DWC3 core and a platform specific (optional) DWC3 glue driver.
This has resulted in, at least in the case of the Qualcomm glue, the
presence of a number of layering violations, where the glue code either
can't handle, or has to work around, the fact that core might not probe
deterministically.
An example of this is that the suspend path should operate slightly
different depending on the device operating in host or peripheral mode,
and the only way to determine the operating state is to peek into the
core's drvdata.
The Qualcomm glue driver is expected to make updates in the qscratch
register region (the "glue" region) during role switch events, but with
the glue and core split using the driver model, there is no reasonable
way to introduce listeners for mode changes.
Split the dwc3 core platform_driver callbacks and their implementation
and export the implementation, to make it possible to deterministically
instantiate the dwc3 core as part of the dwc3 glue drivers and to
allow flattening of the DeviceTree representation.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250414-dwc3-refactor-v7-3-f015b358722d@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Qualcomm USB glue is not separate of the Synopsys DWC3 core and
several of the snps,dwc3 properties (such as clocks and reset) conflicts
in expectation with the Qualcomm integration.
Using the newly split out Synopsys DWC3 core properties, describe the
Qualcomm USB block in a single block. The new binding is a copy of
qcom,dwc3 with the needed modifications.
It would have been convenient to retain the two structures with the same
compatibles, but as there exist no way to select a binding based on the
absence of a subnode/patternProperty, a new generic compatible is
introduced to describe this binding.
To avoid redefining all the platform-specific compatibles, "select" is
used to tell the DeviceTree validator which binding to use solely on the
generic compatible. (Otherwise if the specific compatible matches during
validation, the generic one must match as well)
Mark qcom,dwc3 deprecated, to favor expressing future platforms using
the new combined binding.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250414-dwc3-refactor-v7-2-f015b358722d@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to more tightly integrate the Qualcomm glue driver with the
dwc3 core the driver is redesigned to avoid splitting the implementation
using the driver model. But due to the strong coupling to the Devicetree
binding needs to be updated as well.
Various ways to provide backwards compatibility with existing Devicetree
blobs has been explored, but migrating the Devicetree information
between the old and the new binding is non-trivial.
For the vast majority of boards out there, the kernel and Devicetree are
generated and handled together, which in practice means that backwards
compatibility needs to be managed across about 1 kernel release.
For some though, such as the various Snapdragon laptops, the Devicetree
blobs live a life separate of the kernel. In each one of these, with the
continued extension of new features, it's recommended that users would
upgrade their Devicetree somewhat frequently.
With this in mind, simply carrying a snapshot/copy of the current driver
is simpler than creating and maintaining the migration code.
The driver is kept under the same Kconfig option, to ensure that Linux
distributions doesn't drop USB support on these platforms.
The driver, which is going to be refactored to handle the newly
introduced qcom,snps-dwc3 compatible, is updated to temporarily not
match against any compatible.
This driver should be removed after the next LTS release.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250414-dwc3-refactor-v7-1-f015b358722d@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Exynos2200 SoC has a DWC3 compatible USB controller and can reuse
the existing Exynos glue. Update the dt schema to include the
samsung,exynos2200-dwusb3 compatible for it.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250412203313.738429-2-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Realtek RTL8188ETV 2.4 GHz WiFi modules (detected as RTL8188EU by the
RTL8XXXXU driver) are found soldered into some embedded devices, such as
the Fernsehfee 3.0 set-top box.
They require a 3.3V power supply.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250408-rtl-onboard-v2-2-0b6730b90e31@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an on-board USB device that requires a 3.3V supply.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250408-rtl-onboard-v2-1-0b6730b90e31@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the current FUSE writeback design (see commit 3be5a52b30
("fuse: support writable mmap")), a temp page is allocated for every
dirty page to be written back, the contents of the dirty page are copied
over to the temp page, and the temp page gets handed to the server to
write back.
This is done so that writeback may be immediately cleared on the dirty
page, and this in turn is done in order to mitigate the following
deadlock scenario that may arise if reclaim waits on writeback on the
dirty page to complete:
* single-threaded FUSE server is in the middle of handling a request
that needs a memory allocation
* memory allocation triggers direct reclaim
* direct reclaim waits on a folio under writeback
* the FUSE server can't write back the folio since it's stuck in
direct reclaim
With a recent change that added AS_WRITEBACK_MAY_DEADLOCK_ON_RECLAIM and
mitigates the situation described above, FUSE writeback does not need
to use temp pages if it sets AS_WRITEBACK_MAY_DEADLOCK_ON_RECLAIM on its
inode mappings.
This commit sets AS_WRITEBACK_MAY_DEADLOCK_ON_RECLAIM on the inode
mappings and removes the temporary pages + extra copying and the internal
rb tree.
fio benchmarks --
(using averages observed from 10 runs, throwing away outliers)
Setup:
sudo mount -t tmpfs -o size=30G tmpfs ~/tmp_mount
./libfuse/build/example/passthrough_ll -o writeback -o max_threads=4 -o source=~/tmp_mount ~/fuse_mount
fio --name=writeback --ioengine=sync --rw=write --bs={1k,4k,1M} --size=2G
--numjobs=2 --ramp_time=30 --group_reporting=1 --directory=/root/fuse_mount
bs = 1k 4k 1M
Before 351 MiB/s 1818 MiB/s 1851 MiB/s
After 341 MiB/s 2246 MiB/s 2685 MiB/s
% diff -3% 23% 45%
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently in shrink_folio_list(), reclaim for folios under writeback
falls into 3 different cases:
1) Reclaim is encountering an excessive number of folios under
writeback and this folio has both the writeback and reclaim flags
set
2) Dirty throttling is enabled (this happens if reclaim through cgroup
is not enabled, if reclaim through cgroupv2 memcg is enabled, or
if reclaim is on the root cgroup), or if the folio is not marked for
immediate reclaim, or if the caller does not have __GFP_FS (or
__GFP_IO if it's going to swap) set
3) Legacy cgroupv1 encounters a folio that already has the reclaim flag
set and the caller did not have __GFP_FS (or __GFP_IO if swap) set
In cases 1) and 2), we activate the folio and skip reclaiming it while
in case 3), we wait for writeback to finish on the folio and then try
to reclaim the folio again. In case 3, we wait on writeback because
cgroupv1 does not have dirty folio throttling, as such this is a
mitigation against the case where there are too many folios in writeback
with nothing else to reclaim.
If a filesystem (eg fuse) may deadlock due to reclaim waiting on
writeback, then the filesystem needs to add inefficient messy workarounds
to prevent this. To improve the performance of these filesystems, this
commit adds two things:
a) a AS_WRITEBACK_MAY_DEADLOCK_ON_RECLAIM mapping flag that filesystems
may set to indicate that reclaim should not wait on writeback
b) if legacy memcg encounters a folio with this
AS_WRITEBACK_MAY_DEADLOCK_ON_RECLAIM flag set (eg case 3), the folio
will be activated and skip reclaim (eg default to behavior in case 2)
instead.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Manually add sysfs groups after the faux_device_ops's probe succeeds.
Likewise remove these groups just before calling the faux_devices_ops's
remove callback. This approach approximates the order in which the
driver core adds and removes the driver's .dev_groups of a device to
avoid lifetime issues.
This is done specifically to avoid using the device's .groups member,
which adds groups before the device is even registered to the bus.
This lets consumers of this API, initialize resources on the .probe
callback and then use them inside is_visible/show/store methods, through
dev_get_drvdata() without races.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250327-faux-groups-v2-1-745a3cf0bc16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver core git tree has moved, so properly document it.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/2025041447-showbiz-other-7130@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when checking whether a request has timed out, we check
fpq processing, but fuse-over-io-uring has one fpq per core and 256
entries in the processing table. For systems where there are a
large number of cores, this may be too much overhead.
Instead of checking the fpq processing list, check ent_w_req_queue
and ent_in_userspace.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Bernd Schubert <bernd@bsbernd.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch suggests the replacement of strncpy with strscpy
as per Documentation/process/deprecated.
The strncpy() fails to guarantee NULL termination,
The function adds zero pads which isn't really convenient for short strings
as it may cause performance issues.
strscpy() is a preferred replacement because
it overcomes the limitations of strncpy mentioned above.
Compile Tested
Signed-off-by: Kevin Paul Reddy Janagari <kevinpaul468@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Tested-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250411085010.6249-1-kevinpaul468@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the __counted_by() compiler attribute to the flexible array member
'data' to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250415090354.92211-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct page->mapping, index fields are deprecated and soon to be only
available as part of a folio.
It is likely the intel_th code which sets page->mapping, index is was
implemented out of concern that some aspect of the page fault logic may
encounter unexpected problems should they not.
However, the appropriate interface for inserting kernel-allocated memory is
vm_insert_page() in a VM_MIXEDMAP. By using the helper function
vmf_insert_mixed() we can do this with minimal churn in the existing fault
handler.
By doing so, we bypass the remainder of the faulting logic. The pages are
still pinned so there is no possibility of anything unexpected being done
with the pages once established.
It would also be reasonable to pre-map everything on fault, however to
minimise churn we retain the fault handler.
We also eliminate all code which clears page->mapping on teardown as this
has now become unnecessary.
The MSU code relies on faulting to function correctly, so is by definition
dependent on CONFIG_MMU. We avoid spurious reports about compilation
failure for unsupported platforms by making this requirement explicit in
Kconfig as part of this change too.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20250331125608.60300-1-lorenzo.stoakes@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we already added a generic compatible string for all IMG Rogue GPUs
("img,img-rogue"), all that's needed here is to link the appropriate
firmware for the BXS-4-64 GPU in the AM68.
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Link: https://lore.kernel.org/r/20250410-sets-bxs-4-64-patch-v1-v6-16-eda620c5865f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
The TI k3-j721s2 platform does not allow us to use uncached memory
(which is what the driver currently does) without disabling cache snooping
on the AXI ACE-Lite interface, which would be too much of a performance
hit.
Given the platform is dma-coherent, we can simply force all
device-accessible memory allocations through the CPU cache. In fact, this
can be done whenever the dma_coherent attribute is present.
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Link: https://lore.kernel.org/r/20250410-sets-bxs-4-64-patch-v1-v6-15-eda620c5865f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Currently only MIPS firmware processors use ELF-formatted firmware. When
adding support for RISC-V firmware processors, it will be useful to have
ELF handling functions ready to go.
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Link: https://lore.kernel.org/r/20250410-sets-bxs-4-64-patch-v1-v6-13-eda620c5865f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
With more than two firmware processor types, the if/else chain in
pvr_fw_init() gets a bit ridiculous. Use a static array indexed on
pvr_fw_processor_type (which is now a proper enum instead of #defines)
instead.
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Link: https://lore.kernel.org/r/20250410-sets-bxs-4-64-patch-v1-v6-11-eda620c5865f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
After a previous commit ("drm/imagination: Mask GPU IRQs in threaded
handler"), this register is now only used to enable firmware interrupts at
start-of-day. This is, however, unnecessary since they are enabled by
default.
In addition, the soon-to-be-added RISC-V firmware processors do not have
an equivalent register.
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Link: https://lore.kernel.org/r/20250410-sets-bxs-4-64-patch-v1-v6-8-eda620c5865f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Extend interrupt handling logic to check for safety event IRQs, then clear
and handle them in the IRQ handler thread.
Safety events need to be checked and cleared with a different set of GPU
registers than those the IRQ handler has been using so far.
Only two safety events need to be handled on the host: FW fault (ECC error
correction or detection) and device watchdog timeout. Handling right now
simply consists of clearing any error and logging the event. If either of
these events results in an unrecoverable GPU or FW, the driver will
eventually attempt to recover from it e.g. via pvr_power_reset().
Note that Rogue GPUs may send interrupts to the host for all types of
safety events, not just the two above. For events not handled by the host,
clearing the associated interrupt is sufficient.
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Link: https://lore.kernel.org/r/20250410-sets-bxs-4-64-patch-v1-v6-7-eda620c5865f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Pass IRQF_ONESHOT flag to request_threaded_irq(), so that interrupts will
be masked by the kernel until the end of the threaded IRQ handler. Since
the calls to pvr_fw_irq_enable() and pvr_fw_irq_disable() are now
redundant, remove them.
Interrupts to the host from the soon-to-be-added RISC-V firmware
processors cannot be masked in hardware. This change allows us to continue
using the threaded handler in GPUs with a RISC-V firmware.
For simplicity, the same approach is taken for all firmware processors.
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Link: https://lore.kernel.org/r/20250410-sets-bxs-4-64-patch-v1-v6-6-eda620c5865f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
The first supported GPU only used a single power domain so this was
automatically handled by the device runtime.
In order to support multiple power domains, they must be enumerated from
devicetree and linked to both the GPU device and each other to ensure
correct power sequencing at start time.
For all Imagination Rogue GPUs, power domains are named "a", "b", etc. and
the sequence A->B->... is always valid for startup with the reverse true
for shutdown. Note this is not always the *only* valid sequence, but it's
simple and does not require special-casing for different GPU power
topologies.
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Link: https://lore.kernel.org/r/20250410-sets-bxs-4-64-patch-v1-v6-5-eda620c5865f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
